Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.00 seconds) Test will time out and terminate in 3600 seconds run the VM test script additionally exposed symbols: buildbot, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh buildbot: waiting for unit sshd.service buildbot: waiting for the VM to finish booting buildbot: starting vm buildbot: QEMU running (pid 12) buildbot # Disk image does not exist, creating the virtualisation disk image... buildbot # Formatting '/build/vm-state-buildbot/tmp.CzE0M3TSn8', fmt=raw size=1073741824 buildbot # mke2fs 1.47.4 (6-Mar-2025) buildbot # Discarding device blocks: 0/262144 done buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes buildbot # Filesystem UUID: a7bf2a29-8ec0-494e-b928-b90df1805209 buildbot # Superblock backups stored on blocks: buildbot # 32768, 98304, 163840, 229376 buildbot # buildbot # Allocating group tables: 0/8 done buildbot # Writing inode tables: 0/8 done buildbot # Creating journal (8192 blocks): done buildbot # Writing superblocks and filesystem accounting information: 0/8 done buildbot # buildbot # Virtualisation disk image created. buildbot # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0xc00fac40] buildbot # [ 0.000000] Linux version 6.18.38 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT Sat Jul 4 11:44:22 UTC 2026 buildbot # [ 0.000000] KASLR enabled buildbot # [ 0.000000] random: crng init done buildbot # [ 0.000000] Machine model: linux,dummy-virt buildbot # [ 0.000000] efi: UEFI not found. buildbot # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT buildbot # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] NODE_DATA(0) allocated [mem 0x7fded740-0x7fdf0ebf] buildbot # [ 0.000000] Zone ranges: buildbot # [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] DMA32 empty buildbot # [ 0.000000] Normal empty buildbot # [ 0.000000] Device empty buildbot # [ 0.000000] Movable zone start for each node buildbot # [ 0.000000] Early memory node ranges buildbot # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc00000 buildbot # [ 0.000000] psci: probing for conduit method from DT. buildbot # [ 0.000000] psci: PSCIv1.3 detected in firmware. buildbot # [ 0.000000] psci: Using standard PSCI v0.2 function IDs buildbot # [ 0.000000] psci: Trusted OS migration not required buildbot # [ 0.000000] psci: SMC Calling Convention v1.1 buildbot # [ 0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003) buildbot # [ 0.000000] percpu: Embedded 76 pages/cpu s186392 r8192 d116712 u311296 buildbot # [ 0.000000] Detected PIPT I-cache on CPU0 buildbot # [ 0.000000] CPU features: detected: Address authentication (architected QARMA5 algorithm) buildbot # [ 0.000000] CPU features: detected: GICv3 CPU interface buildbot # [ 0.000000] CPU features: detected: Spectre-v4 buildbot # [ 0.000000] CPU features: detected: Spectre-BHB buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC03_CPU_38 buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC04_CPU_23 buildbot # [ 0.000000] alternatives: applying boot alternatives buildbot # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/gh37zqqh2bcwv7n1xmkq42i5w3p1bpih-nixos-system-buildbot-test/init regInfo=/nix/store/ha5y3q7pf0i92zb6hqfa66q6ym4wvq90-closure-info/registration console=ttyAMA0,115200n8 console=tty0 buildbot # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/ha5y3q7pf0i92zb6hqfa66q6ym4wvq90-closure-info/registration", will be passed to user space. buildbot # [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes buildbot # [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) buildbot # [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) buildbot # [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB buildbot # [ 0.000000] software IO TLB: area num 1. buildbot # [ 0.000000] software IO TLB: mapped [mem 0x000000007ca80000-0x000000007cb80000] (1MB) buildbot # [ 0.000000] Fallback order for Node 0: 0 buildbot # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 buildbot # [ 0.000000] Policy zone: DMA buildbot # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off buildbot # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 buildbot # [ 0.000000] allocated 2097152 bytes of page_ext buildbot # [ 0.000000] ftrace: allocating 74713 entries in 292 pages buildbot # [ 0.000000] ftrace: allocated 292 pages with 3 groups buildbot # [ 0.000000] rcu: Hierarchical RCU implementation. buildbot # [ 0.000000] rcu: RCU event tracing is enabled. buildbot # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. buildbot # [ 0.000000] Trampoline variant of Tasks RCU enabled. buildbot # [ 0.000000] Rude variant of Tasks RCU enabled. buildbot # [ 0.000000] Tracing variant of Tasks RCU enabled. buildbot # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. buildbot # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 buildbot # [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 buildbot # [ 0.000000] GICv3: 256 SPIs implemented buildbot # [ 0.000000] GICv3: 0 Extended SPIs implemented buildbot # [ 0.000000] Root IRQ handler: gic_handle_irq buildbot # [ 0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI buildbot # [ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=0 buildbot # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 buildbot # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @44ce0000 (indirect, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @44cf0000 (flat, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] GICv3: using LPI property table @0x0000000044d00000 buildbot # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000044d10000 buildbot # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. buildbot # [ 0.000000] arch_timer: cp15 timer running at 1000.00MHz (virt). buildbot # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns buildbot # [ 0.000000] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns buildbot # [ 0.000029] arm-pv: using stolen time PV buildbot # [ 0.000394] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) buildbot # [ 0.000567] Console: colour dummy device 80x25 buildbot # [ 0.000575] printk: legacy console [tty0] enabled buildbot # [ 0.000750] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) buildbot # [ 0.000757] pid_max: default: 32768 minimum: 301 buildbot # [ 0.000839] LSM: initializing lsm=capability,landlock,yama,bpf,ima buildbot # [ 0.000966] landlock: Up and running. buildbot # [ 0.000969] Yama: becoming mindful. buildbot # [ 0.001408] LSM support for eBPF active buildbot # [ 0.001510] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.001533] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.002609] cacheinfo: Unable to detect cache hierarchy for CPU 0 buildbot # [ 0.003317] rcu: Hierarchical SRCU implementation. buildbot # [ 0.003320] rcu: Max phase no-delay instances is 1000. buildbot # [ 0.004525] fsl-mc MSI: its@8080000 domain created buildbot # [ 0.004614] EFI services will not be available. buildbot # [ 0.004692] smp: Bringing up secondary CPUs ... buildbot # [ 0.004700] smp: Brought up 1 node, 1 CPU buildbot # [ 0.004703] SMP: Total of 1 processors activated. buildbot # [ 0.004706] CPU: All CPU(s) started at EL1 buildbot # [ 0.004716] CPU features: detected: Branch Target Identification buildbot # [ 0.004721] CPU features: detected: ARMv8.4 Translation Table Level buildbot # [ 0.004727] CPU features: detected: Instruction cache invalidation not required for I/D coherence buildbot # [ 0.004731] CPU features: detected: Data cache clean to the PoU not required for I/D coherence buildbot # [ 0.004734] CPU features: detected: Common not Private translations buildbot # [ 0.004737] CPU features: detected: CRC32 instructions buildbot # [ 0.004740] CPU features: detected: Data cache clean to Point of Deep Persistence buildbot # [ 0.004744] CPU features: detected: Data cache clean to Point of Persistence buildbot # [ 0.004747] CPU features: detected: Data independent timing control (DIT) buildbot # [ 0.004750] CPU features: detected: E0PD buildbot # [ 0.004752] CPU features: detected: Enhanced Counter Virtualization buildbot # [ 0.004755] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) buildbot # [ 0.004759] CPU features: detected: Enhanced Virtualization Traps buildbot # [ 0.004762] CPU features: detected: Fine Grained Traps buildbot # [ 0.004766] CPU features: detected: Generic authentication (architected QARMA5 algorithm) buildbot # [ 0.004770] CPU features: detected: RCpc load-acquire (LDAPR) buildbot # [ 0.004773] CPU features: detected: LSE atomic instructions buildbot # [ 0.004776] CPU features: detected: Privileged Access Never buildbot # [ 0.004778] CPU features: detected: PMUv3 buildbot # [ 0.004781] CPU features: detected: RAS Extension Support buildbot # [ 0.004784] CPU features: detected: RASv1p1 Extension Support buildbot # [ 0.004786] CPU features: detected: Random Number Generator buildbot # [ 0.004789] CPU features: detected: Speculation barrier (SB) buildbot # [ 0.004792] CPU features: detected: Stage-2 Force Write-Back buildbot # [ 0.004794] CPU features: detected: TLB range maintenance instructions buildbot # [ 0.004799] CPU features: detected: Speculative Store Bypassing Safe (SSBS) buildbot # [ 0.004835] alternatives: applying system-wide alternatives buildbot # [ 0.007648] CPU features: detected: BBM Level 2 without TLB conflict abort buildbot # [ 0.007817] Memory: 895032K/1048576K available (24384K kernel code, 7086K rwdata, 26324K rodata, 4736K init, 1102K bss, 112244K reserved, 32768K cma-reserved) buildbot # [ 0.008164] devtmpfs: initialized buildbot # [ 0.009803] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns buildbot # [ 0.009825] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.009845] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). buildbot # [ 0.010017] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL buildbot # [ 0.010022] 0 pages in range for non-PLT usage buildbot # [ 0.010023] 508320 pages in range for PLT usage buildbot # [ 0.010134] pinctrl core: initialized pinctrl subsystem buildbot # [ 0.010879] DMI not present or invalid. buildbot # [ 0.013933] NET: Registered PF_NETLINK/PF_ROUTE protocol family buildbot # [ 0.016171] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations buildbot # [ 0.016323] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations buildbot # [ 0.016479] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations buildbot # [ 0.016500] audit: initializing netlink subsys (disabled) buildbot # [ 0.017022] thermal_sys: Registered thermal governor 'fair_share' buildbot # [ 0.017024] thermal_sys: Registered thermal governor 'bang_bang' buildbot # [ 0.017028] thermal_sys: Registered thermal governor 'step_wise' buildbot # [ 0.017030] thermal_sys: Registered thermal governor 'user_space' buildbot # [ 0.017033] thermal_sys: Registered thermal governor 'power_allocator' buildbot # [ 0.017065] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1 buildbot # [ 0.017075] cpuidle: using governor ladder buildbot # [ 0.017081] cpuidle: using governor menu buildbot # [ 0.017261] hw-breakpoint: found 16 breakpoint and 4 watchpoint registers. buildbot # [ 0.017277] ASID allocator initialised with 65536 entries buildbot # [ 0.018405] Serial: AMBA PL011 UART driver buildbot # [ 0.023401] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 buildbot # [ 0.023526] printk: console [ttyAMA0] enabled buildbot # [ 0.151009] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages buildbot # [ 0.151027] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page buildbot # [ 0.151033] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages buildbot # [ 0.151037] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page buildbot # [ 0.151042] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages buildbot # [ 0.151046] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page buildbot # [ 0.151051] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages buildbot # [ 0.151055] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page buildbot # [ 0.158617] fbcon: Taking over console buildbot # [ 0.158631] ACPI: Interpreter disabled. buildbot # [ 0.160529] iommu: Default domain type: Translated buildbot # [ 0.160539] iommu: DMA domain TLB invalidation policy: strict mode buildbot # [ 0.162283] SCSI subsystem initialized buildbot # [ 0.167453] usbcore: registered new interface driver usbfs buildbot # [ 0.167495] usbcore: registered new interface driver hub buildbot # [ 0.167512] usbcore: registered new device driver usb buildbot # [ 0.167770] pps_core: LinuxPPS API ver. 1 registered buildbot # [ 0.167776] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti buildbot # [ 0.167787] PTP clock support registered buildbot # [ 0.167844] EDAC MC: Ver: 3.0.0 buildbot # [ 0.172695] scmi_core: SCMI protocol bus registered buildbot # [ 0.173664] FPGA manager framework buildbot # [ 0.174631] vgaarb: loaded buildbot # [ 0.175270] clocksource: Switched to clocksource arch_sys_counter buildbot # [ 0.176765] VFS: Disk quotas dquot_6.6.0 buildbot # [ 0.176800] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) buildbot # [ 0.178425] netfs: FS-Cache loaded buildbot # [ 0.178535] pnp: PnP ACPI: disabled buildbot # [ 0.187072] NET: Registered PF_INET protocol family buildbot # [ 0.187229] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) buildbot # [ 0.214458] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.214492] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) buildbot # [ 0.214515] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) buildbot # [ 0.214558] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) buildbot # [ 0.214634] TCP: Hash tables configured (established 8192 bind 8192) buildbot # [ 0.214703] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) buildbot # [ 0.214754] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.214801] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.214872] NET: Registered PF_UNIX/PF_LOCAL protocol family buildbot # [ 0.214891] NET: Registered PF_XDP protocol family buildbot # [ 0.214908] PCI: CLS 0 bytes, default 64 buildbot # [ 0.215126] Trying to unpack rootfs image as initramfs... buildbot # [ 0.233348] kvm [1]: HYP mode not available buildbot # [ 0.323715] Initialise system trusted keyrings buildbot # [ 0.324444] workingset: timestamp_bits=42 max_order=18 bucket_order=0 buildbot # [ 0.325987] squashfs: version 4.0 (2009/01/31) Phillip Lougher buildbot # [ 0.326765] 9p: Installing v9fs 9p2000 file system support buildbot # [ 0.355474] Key type asymmetric registered buildbot # [ 0.355491] Asymmetric key parser 'x509' registered buildbot # [ 0.355541] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) buildbot # [ 0.357694] io scheduler mq-deadline registered buildbot # [ 0.357705] io scheduler kyber registered buildbot # [ 0.367376] pl061_gpio 9030000.pl061: PL061 GPIO chip registered buildbot # [ 0.368754] ledtrig-cpu: registered to indicate activity on CPUs buildbot # [ 0.369122] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: buildbot # [ 0.369139] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 buildbot # [ 0.369151] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 buildbot # [ 0.369159] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 buildbot # [ 0.369180] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits buildbot # [ 0.369202] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] buildbot # [ 0.369272] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 buildbot # [ 0.369282] pci_bus 0000:00: root bus resource [bus 00-ff] buildbot # [ 0.369288] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] buildbot # [ 0.369293] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] buildbot # [ 0.369298] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] buildbot # [ 0.369354] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint buildbot # [ 0.369800] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.369992] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.370008] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.370038] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.370054] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.370517] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.370706] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.370722] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.370752] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.371224] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.371433] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.371449] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.371479] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.371946] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.372134] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.372150] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.372179] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.372643] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.372833] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.372849] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.372879] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.373344] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint buildbot # [ 0.373533] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] buildbot # [ 0.373549] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.373579] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.374070] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.374259] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.374274] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.374304] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.374320] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.374771] pci 0000:00:08.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint buildbot # [ 0.374963] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.374994] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.423551] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint buildbot # [ 0.423761] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.423792] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.424224] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint buildbot # [ 0.424413] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] buildbot # [ 0.424669] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint buildbot # [ 0.424970] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.424987] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.425017] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.425480] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.425669] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.425685] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.425714] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.426282] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned buildbot # [ 0.426294] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned buildbot # [ 0.426300] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned buildbot # [ 0.426345] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned buildbot # [ 0.426392] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned buildbot # [ 0.426440] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned buildbot # [ 0.426487] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned buildbot # [ 0.426535] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned buildbot # [ 0.426583] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned buildbot # [ 0.426631] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned buildbot # [ 0.426679] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned buildbot # [ 0.426726] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned buildbot # [ 0.426784] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned buildbot # [ 0.426831] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned buildbot # [ 0.426852] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned buildbot # [ 0.426874] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned buildbot # [ 0.426896] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned buildbot # [ 0.426918] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned buildbot # [ 0.426940] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned buildbot # [ 0.426965] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned buildbot # [ 0.426987] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned buildbot # [ 0.427010] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned buildbot # [ 0.427032] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned buildbot # [ 0.427054] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned buildbot # [ 0.427077] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned buildbot # [ 0.427099] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned buildbot # [ 0.427120] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned buildbot # [ 0.427142] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned buildbot # [ 0.427164] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned buildbot # [ 0.427186] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned buildbot # [ 0.427207] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned buildbot # [ 0.427229] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned buildbot # [ 0.427251] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned buildbot # [ 0.427291] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned buildbot # [ 0.427317] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] buildbot # [ 0.427327] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] buildbot # [ 0.427331] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] buildbot # [ 0.428529] pci 0000:00:0a.0: enabling device (0000 -> 0002) buildbot # [ 0.497125] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) buildbot # [ 0.499105] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) buildbot # [ 0.508867] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) buildbot # [ 0.512152] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) buildbot # [ 0.514084] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) buildbot # [ 0.524362] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) buildbot # [ 0.526383] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) buildbot # [ 0.530437] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) buildbot # [ 0.538311] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) buildbot # [ 0.544191] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) buildbot # [ 0.546325] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) buildbot # [ 0.564540] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled buildbot # [ 0.566983] msm_serial: driver initialized buildbot # [ 0.567113] SuperH (H)SCI(F) driver initialized buildbot # [ 0.567166] STM32 USART driver initialized buildbot # [ 0.600990] loop: module loaded buildbot # [ 0.601157] virtio_blk virtio5: 1/0/0 default/read/poll queues buildbot # [ 0.601878] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) buildbot # [ 0.607792] megasas: 07.734.00.00-rc1 buildbot # [ 0.608534] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] buildbot # [ 0.610303] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.610325] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.619937] Using buffer write method buildbot # [ 0.620004] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] buildbot # [ 0.621442] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.621463] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.623034] Using buffer write method buildbot # [ 0.623058] Concatenating MTD devices: buildbot # [ 0.623062] (0): "0.flash" buildbot # [ 0.623066] (1): "0.flash" buildbot # [ 0.623070] into device "0.flash" buildbot # [ 0.829349] Freeing initrd memory: 25516K buildbot # [ 0.835168] tun: Universal TUN/TAP device driver, 1.6 buildbot # [ 0.838799] thunder_xcv, ver 1.0 buildbot # [ 0.838837] thunder_bgx, ver 1.0 buildbot # [ 0.838860] nicpf, ver 1.0 buildbot # [ 0.840709] e1000: Intel(R) PRO/1000 Network Driver buildbot # [ 0.840721] e1000: Copyright (c) 1999-2006 Intel Corporation. buildbot # [ 0.840750] e1000e: Intel(R) PRO/1000 Network Driver buildbot # [ 0.840757] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. buildbot # [ 0.840787] igb: Intel(R) Gigabit Ethernet Network Driver buildbot # [ 0.840793] igb: Copyright (c) 2007-2014 Intel Corporation. buildbot # [ 0.840815] igbvf: Intel(R) Gigabit Virtual Function Network Driver buildbot # [ 0.840820] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. buildbot # [ 0.840951] sky2: driver version 1.30 buildbot # [ 0.842502] usbcore: registered new interface driver usb-storage buildbot # [ 0.842579] usbcore: registered new interface driver usbserial_generic buildbot # [ 0.842594] usbserial: USB Serial support registered for generic buildbot # [ 0.843172] hv_vmbus: registering driver hyperv_keyboard buildbot # [ 0.844203] ehci-pci 0000:00:0a.0: EHCI Host Controller buildbot # [ 0.844227] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 buildbot # [ 0.844387] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 buildbot # [ 0.856113] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 buildbot # [ 0.856424] hub 1-0:1.0: USB hub found buildbot # [ 0.856445] hub 1-0:1.0: 6 ports detected buildbot # [ 0.859310] rtc-pl031 9010000.pl031: registered as rtc0 buildbot # [ 0.859336] rtc-pl031 9010000.pl031: setting system clock to 2026-07-05T05:59:57 UTC (1783231197) buildbot # [ 0.859629] i2c_dev: i2c /dev entries driver buildbot # [ 0.864634] sdhci: Secure Digital Host Controller Interface driver buildbot # [ 0.864644] sdhci: Copyright(c) Pierre Ossman buildbot # [ 0.864907] Synopsys Designware Multimedia Card Interface Driver buildbot # [ 0.865265] sdhci-pltfm: SDHCI platform and OF driver helper buildbot # [ 0.866851] hid: raw HID events driver (C) Jiri Kosina buildbot # [ 0.867086] usbcore: registered new interface driver usbhid buildbot # [ 0.867093] usbhid: USB HID core driver buildbot # [ 0.904343] hw perfevents: enabled with armv8_pmuv3 PMU driver, 11 (0,800003ff) counters available buildbot # [ 0.905830] drop_monitor: Initializing network drop monitor service buildbot # [ 0.905955] NET: Registered PF_INET6 protocol family buildbot # [ 0.909138] Segment Routing with IPv6 buildbot # [ 0.909157] In-situ OAM (IOAM) with IPv6 buildbot # [ 0.909189] NET: Registered PF_PACKET protocol family buildbot # [ 0.910883] 9pnet: Installing 9P2000 support buildbot # [ 0.913580] Key type dns_resolver registered buildbot # [ 0.919721] registered taskstats version 1 buildbot # [ 0.919860] Loading compiled-in X.509 certificates buildbot # [ 0.928216] Demotion targets for Node 0: null buildbot # [ 0.928355] Key type .fscrypt registered buildbot # [ 0.928363] Key type fscrypt-provisioning registered buildbot # [ 0.928453] ima: No TPM chip found, activating TPM-bypass! buildbot # [ 0.928472] ima: Allocated hash algorithm: sha1 buildbot # [ 0.928493] ima: No architecture policies found buildbot # [ 0.932630] input: gpio-keys as /devices/platform/gpio-keys/input/input0 buildbot # [ 0.950455] clk: Disabling unused clocks buildbot # [ 0.950476] PM: genpd: Disabling unused power domains buildbot # [ 0.954889] Freeing unused kernel memory: 4736K buildbot # [ 0.955074] Run /init as init process buildbot # [ 0.969489] systemd[1]: Successfully made /usr/ read-only. buildbot # [ 1.127350] usb 1-1: new high-speed USB device number 2 using ehci-pci buildbot # [ 1.279527] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 buildbot # [ 1.304086] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 1.316547] systemd[1]: Detected virtualization qemu. buildbot # [ 1.318459] systemd[1]: Detected architecture arm64. buildbot # [ 1.320433] systemd[1]: Running in initrd. buildbot # [ 1.323096] systemd[1]: Initializing machine ID from random generator. buildbot # [ 1.326171] systemd[1]: Hostname set to . buildbot # [ 1.367710] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 buildbot # [ 1.451037] systemd[1]: Queued start job for default target Initrd Default Target. buildbot # [ 1.461469] systemd[1]: Created slice Slice /system/modprobe. buildbot # [ 1.462803] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 1.464408] systemd[1]: Expecting device /dev/disk/by-label/nixos... buildbot # [ 1.465629] systemd[1]: Reached target Path Units. buildbot # [ 1.466562] systemd[1]: Reached target Slice Units. buildbot # [ 1.467544] systemd[1]: Reached target Swaps. buildbot # [ 1.468406] systemd[1]: Reached target Timer Units. buildbot # [ 1.469579] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 1.470986] systemd[1]: Listening on Journal Socket (/dev/log). buildbot # [ 1.472403] systemd[1]: Listening on Journal Sockets. buildbot # [ 1.472552] systemd[1]: Listening on udev Control Socket. buildbot # [ 1.472668] systemd[1]: Listening on udev Kernel Socket. buildbot # [ 1.472693] systemd[1]: Reached target Socket Units. buildbot # [ 1.478057] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 1.487465] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 1.488754] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 1.491327] usb 1-2: new high-speed USB device number 3 using ehci-pci buildbot # [ 1.499684] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 1.507464] systemd[1]: Starting Journal Service... buildbot # [ 1.535445] systemd[1]: Starting Load Kernel Modules... buildbot # [ 1.536379] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 1.539589] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 1.552097] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 1.554062] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 1.557338] systemd-journald[73]: Collecting audit messages is disabled. buildbot # [ 1.558346] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 1.558632] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 1.564148] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 1.604662] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. buildbot # [ 1.620046] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 1.622089] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev buildbot # [ 1.627627] [drm] pci: virtio-gpu-pci detected at 0000:00:08.0 buildbot # [ 1.627858] [drm] features: -virgl +edid -resource_blob -host_visible buildbot # [ 1.627868] [drm] features: -context_init buildbot # [ 1.628598] [drm] number of scanouts: 1 buildbot # [ 1.628618] [drm] number of cap sets: 0 buildbot # [ 1.632369] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 1.645970] virtio-pci 0000:00:08.0: [drm] Registered 1 planes with drm panic buildbot # [ 1.645988] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:08.0 on minor 0 buildbot # [ 1.660234] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 buildbot # [ 1.660379] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 buildbot # [ 1.678094] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 1.678265] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 1.678291] systemd[1]: Reached target Local File Systems. buildbot # [ 1.687753] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 1.692608] Console: switching to colour frame buffer device 160x50 buildbot # [ 1.696470] virtio-pci 0000:00:08.0: [drm] fb0: virtio_gpudrmfb frame buffer device buildbot # [ 1.722470] systemd[1]: Finished Load Kernel Modules. buildbot # [ 1.725663] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 1.740307] systemd-modules-load[74]: Inserted module 'dm_mod' buildbot # [ 1.760738] systemd[1]: Started Journal Service. buildbot # [ 1.744566] systemd-modules-load[74]: Module 'virtio_balloon' is built in buildbot # [ 1.745744] systemd-modules-load[74]: Module 'virtio_console' is built in buildbot # [ 1.746863] systemd-modules-load[74]: Inserted module 'virtio_gpu' buildbot # [ 1.747905] systemd-modules-load[74]: Module 'virtio_rng' is built in buildbot # [ 1.768384] systemd[1]: Starting Create System Files and Directories... buildbot # [ 1.769821] systemd-udevd[80]: Using default interface naming scheme 'v260'. buildbot # [ 1.778356] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 1.798527] systemd[1]: Finished Create System Files and Directories. buildbot # [ 1.822351] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 1.896094] systemd[1]: Starting Virtual Console Setup... buildbot # [ 1.964109] systemd-vconsole-setup[104]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 1.968138] systemd[1]: Finished Virtual Console Setup. buildbot # [ 2.648403] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 2.649629] systemd[1]: Reached target System Initialization. buildbot # [ 2.652561] systemd[1]: Reached target Basic System. buildbot # [ 2.800896] (udev-worker)[102]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.853195] (udev-worker)[103]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 2.860180] (udev-worker)[103]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.887741] systemd[1]: Found device /dev/disk/by-label/nixos. buildbot # [ 2.891378] systemd[1]: Reached target Initrd Root Device. buildbot # [ 2.894895] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... buildbot # [ 2.949738] systemd-fsck[113]: nixos: clean, 12/65536 files, 13019/262144 blocks buildbot # [ 2.958816] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. buildbot # [ 2.965436] systemd[1]: Mounting /sysroot... buildbot # [ 3.021098] EXT4-fs (vda): mounted filesystem a7bf2a29-8ec0-494e-b928-b90df1805209 r/w with ordered data mode. Quota mode: none. buildbot # [ 3.006863] systemd[1]: Mounted /sysroot. buildbot # [ 3.010046] systemd[1]: Reached target Initrd Root File System. buildbot # [ 3.012481] systemd[1]: Starting Mountpoints Configured in the Real Root... buildbot # [ 3.039674] systemd-sysroot-fstab-check[121]: /sysroot should be mounted in the initrd, will request daemon-reload. buildbot # [ 3.044147] systemd[1]: Reload requested from client PID 121 ('systemd-sysroot') (unit initrd-parse-etc.service)... buildbot # [ 3.049628] systemd[1]: Reloading... buildbot # [ 3.280103] systemd[1]: Reloading finished in 232 ms. buildbot # [ 3.297982] systemd-sysroot-fstab-check[121]: Requesting initrd-fs.target/start/replace... buildbot # [ 3.301704] systemd-sysroot-fstab-check[121]: Requesting swap.target/start/replace... buildbot # [ 3.308056] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 3.315551] systemd[1]: initrd-parse-etc.service: Deactivated successfully. buildbot # [ 3.319078] systemd[1]: Finished Mountpoints Configured in the Real Root. buildbot # [ 3.321451] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. buildbot # [ 3.337348] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 3.339140] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 3.528127] systemd[1]: Mounting /sysroot/nix/.ro-store... buildbot # [ 3.541298] systemd[1]: Mounting /sysroot/nix/.rw-store... buildbot # [ 3.553382] systemd[1]: Mounting /sysroot/run... buildbot # [ 3.562438] systemd[1]: Mounting /sysroot/tmp/shared... buildbot # [ 3.586979] systemd[1]: Mounting /sysroot/tmp/xchg... buildbot # [ 3.605792] systemd[1]: Mounted /sysroot/nix/.rw-store. buildbot # [ 3.636224] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.641939] systemd[1]: Mounted /sysroot/nix/.ro-store. buildbot # [ 3.644268] systemd[1]: Mounted /sysroot/run. buildbot # [ 3.650430] systemd[1]: Mounted /sysroot/tmp/shared. buildbot # [ 3.655043] systemd[1]: Mounted /sysroot/tmp/xchg. buildbot # [ 3.672139] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.673271] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 3.675877] systemd[1]: Mounting /sysroot/nix/store... buildbot # [ 3.716946] systemd[1]: Mounted /sysroot/nix/store. buildbot # [ 3.719174] systemd[1]: Reached target Initrd File Systems. buildbot # [ 3.722349] systemd[1]: Starting Find NixOS closure... buildbot # [ 3.736151] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... buildbot # [ 3.767484] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. buildbot # [ 3.784242] systemd[1]: Finished Find NixOS closure. buildbot # [ 3.787541] systemd[1]: Reached target Initrd Default Target. buildbot # [ 3.789877] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... buildbot # [ 3.817667] systemd[1]: Stopped target Initrd Default Target. buildbot # [ 3.821239] systemd[1]: Stopped target Basic System. buildbot # [ 3.824439] systemd[1]: Stopped target Initrd Root Device. buildbot # [ 3.826565] systemd[1]: Stopped target Path Units. buildbot # [ 3.827925] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. buildbot # [ 3.831763] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. buildbot # [ 3.836799] systemd[1]: Stopped target Slice Units. buildbot # [ 3.841414] systemd[1]: Stopped target Socket Units. buildbot # [ 3.842276] systemd[1]: Stopped target System Initialization. buildbot # [ 3.844206] systemd[1]: Stopped target Swaps. buildbot # [ 3.848173] systemd[1]: Stopped target Timer Units. buildbot # [ 3.849879] systemd[1]: dbus.socket: Deactivated successfully. buildbot # [ 3.851859] systemd[1]: Closed D-Bus System Message Bus Socket. buildbot # [ 3.858209] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. buildbot # [ 3.859369] systemd[1]: Stopped Find NixOS closure. buildbot # [ 3.862392] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 3.866562] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.868118] systemd[1]: systemd-sysctl.service: Deactivated successfully. buildbot # [ 3.873897] systemd[1]: Stopped Apply Kernel Variables. buildbot # [ 3.875719] systemd[1]: systemd-modules-load.service: Deactivated successfully. buildbot # [ 3.879274] systemd[1]: Stopped Load Kernel Modules. buildbot # [ 3.889172] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. buildbot # [ 3.891115] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. buildbot # [ 3.898093] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. buildbot # [ 3.899298] systemd[1]: Stopped Create System Files and Directories. buildbot # [ 3.904705] systemd[1]: Stopped target Local File Systems. buildbot # [ 3.906614] systemd[1]: Stopped target Preparation for Local File Systems. buildbot # [ 3.909933] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. buildbot # [ 3.911106] systemd[1]: Stopped Coldplug All udev Devices. buildbot # [ 3.914225] systemd[1]: Stopping Rule-based Manager for Device Events and Files... buildbot # [ 3.915384] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 3.917824] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 3.918632] systemd[1]: initrd-cleanup.service: Deactivated successfully. buildbot # [ 3.919604] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. buildbot # [ 3.924709] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 3.928290] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 3.929293] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.932481] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 3.933850] systemd[1]: systemd-udevd.service: Deactivated successfully. buildbot # [ 3.935399] systemd[1]: Stopped Rule-based Manager for Device Events and Files. buildbot # [ 3.936737] systemd[1]: systemd-udevd.service: Consumed 1.034s CPU time over 2.254s wall clock time, 16.2M memory peak. buildbot # [ 3.938252] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. buildbot # [ 3.939308] systemd[1]: Closed udev Control Socket. buildbot # [ 3.940131] systemd[1]: Starting Cleanup udev Database... buildbot # [ 3.940975] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. buildbot # [ 3.942111] systemd[1]: Stopped Create Static Device Nodes in /dev. buildbot # [ 3.943043] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. buildbot # [ 3.948214] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. buildbot # [ 3.949336] systemd[1]: kmod-static-nodes.service: Deactivated successfully. buildbot # [ 3.952125] systemd[1]: Stopped Create List of Static Device Nodes. buildbot # [ 3.973211] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. buildbot # [ 3.976870] systemd[1]: Finished Cleanup udev Database. buildbot # [ 3.977720] systemd[1]: Reached target Switch Root. buildbot # [ 3.979377] systemd[1]: Starting NixOS Activation... buildbot # [ 4.144442] initrd-nixos-activation-start[173]: booting system configuration /nix/store/gh37zqqh2bcwv7n1xmkq42i5w3p1bpih-nixos-system-buildbot-test buildbot # [ 4.208238] initrd-nixos-activation-start[173]: running activation script... buildbot # [ 4.626674] initrd-nixos-activation-start[196]: setting up /etc... buildbot # [ 4.892575] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. buildbot # [ 4.895266] systemd[1]: Finished NixOS Activation. buildbot # [ 4.900170] systemd[1]: Starting Switch Root... buildbot # [ 4.918563] systemd[1]: Switching root. buildbot # [ 5.001966] systemd-journald[73]: Received SIGTERM from PID 1 (systemd). buildbot # [ 5.571644] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 5.584371] systemd[1]: Detected virtualization qemu. buildbot # [ 5.587401] systemd[1]: Detected architecture arm64. buildbot # [ 5.591070] systemd[1]: Detected first boot. buildbot # [ 5.598517] systemd[1]: Initializing machine ID from random generator. buildbot # [ 5.921485] systemd[1]: bpf-restrict-fs: LSM BPF program attached buildbot # [ 6.122074] NET: Registered PF_VSOCK protocol family buildbot # [ 6.128610] Guest personality initialized and is inactive buildbot # [ 6.130501] VMCI host device registered (name=vmci, major=10, minor=261) buildbot # [ 6.130522] Initialized host personality buildbot # [ 6.189726] systemd[1]: Applying preset policy. buildbot # [ 6.716114] systemd[1]: Populated /etc with preset unit settings. buildbot # [ 7.225247] systemd[1]: initrd-switch-root.service: Deactivated successfully. buildbot # [ 7.226511] systemd[1]: Stopped initrd-switch-root.service. buildbot # [ 7.229985] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. buildbot # [ 7.233422] systemd[1]: Created slice Slice /system/getty. buildbot # [ 7.234936] systemd[1]: Created slice User and Session Slice. buildbot # [ 7.236324] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 7.238171] systemd[1]: Started Forward Password Requests to Wall Directory Watch. buildbot # [ 7.240024] systemd[1]: Expecting device /dev/hvc0... buildbot # [ 7.242276] systemd[1]: Expecting device /dev/ttyAMA0... buildbot # [ 7.243398] systemd[1]: Reached target Local Encrypted Volumes. buildbot # [ 7.245741] systemd[1]: Stopped target initrd-fs.target. buildbot # [ 7.247653] systemd[1]: Stopped target initrd-root-fs.target. buildbot # [ 7.249589] systemd[1]: Stopped target initrd-switch-root.target. buildbot # [ 7.251649] systemd[1]: Reached target Virtual Machines and Containers. buildbot # [ 7.253682] systemd[1]: Reached target Path Units. buildbot # [ 7.255504] systemd[1]: Reached target Remote File Systems. buildbot # [ 7.257401] systemd[1]: Reached target Slice Units. buildbot # [ 7.259192] systemd[1]: Reached target Swaps. buildbot # [ 7.263131] systemd[1]: Listening on Query the User Interactively for a Password. buildbot # [ 7.268033] systemd[1]: Listening on Process Core Dump Socket. buildbot # [ 7.272015] systemd[1]: Listening on Credential Encryption/Decryption. buildbot # [ 7.275790] systemd[1]: Listening on Factory Reset Management. buildbot # [ 7.280914] systemd[1]: Starting Journal Log Access Socket... buildbot # [ 7.282882] systemd[1]: Listening on Journal Audit Socket. buildbot # [ 7.287227] systemd[1]: Listening on Console Output Muting Service Socket. buildbot # [ 7.289799] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. buildbot # [ 7.291975] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.294851] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.304864] systemd[1]: Listening on Disk Repartitioning Service Socket. buildbot # [ 7.306212] systemd[1]: Listening on udev Control Socket. buildbot # [ 7.307702] systemd[1]: Listening on udev Varlink Socket. buildbot # [ 7.311645] systemd[1]: Mounting Huge Pages File System... buildbot # [ 7.315646] systemd[1]: Mounting POSIX Message Queue File System... buildbot # [ 7.320691] systemd[1]: Mounting Kernel Debug File System... buildbot # [ 7.327565] systemd[1]: Mounting Kernel Trace File System... buildbot # [ 7.340268] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 7.349974] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 7.354587] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 7.363481] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 7.364985] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm buildbot # [ 7.367726] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore buildbot # [ 7.383697] systemd[1]: Starting Load Kernel Module fuse... buildbot # [ 7.385265] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 buildbot # [ 7.418356] systemd[1]: Starting Journal Service... buildbot # [ 7.453395] systemd[1]: Starting Load Kernel Modules... buildbot # [ 7.480664] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... buildbot # [ 7.510639] systemd[1]: Starting Remount Root and Kernel File Systems... buildbot # [ 7.514836] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.533052] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 7.537854] systemd-journald[268]: Collecting audit messages is enabled. buildbot # [ 7.527780] systemd[1]: Queued start job for default target Multi-User System. buildbot # [ 7.551957] fuse: init (API version 7.45) buildbot # [ 7.537694] systemd[1]: systemd-journald.service: Deactivated successfully. buildbot # [ 7.578023] systemd[1]: Started Journal Service. buildbot # [ 7.570475] systemd-modules-load[269]: Module 'atkbd' is built in buildbot # [ 7.575563] systemd-modules-load[269]: Module 'loop' is built in buildbot # [ 7.584441] systemd[1]: Listening on Journal Log Access Socket. buildbot # [ 7.585319] systemd[1]: Mounted Huge Pages File System. buildbot # [ 7.586078] systemd[1]: Mounted POSIX Message Queue File System. buildbot # [ 7.586933] systemd[1]: Mounted Kernel Debug File System. buildbot # [ 7.587704] systemd[1]: Mounted Kernel Trace File System. buildbot # [ 7.603770] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 7.610719] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 7.617037] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 7.620625] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 7.628196] systemd[1]: modprobe@fuse.service: Deactivated successfully. buildbot # [ 7.631193] systemd[1]: Finished Load Kernel Module fuse. buildbot # [ 7.632315] systemd-modules-load[269]: Inserted module 'tls' buildbot # [ 7.643308] systemd[1]: Finished Load Kernel Modules. buildbot # [ 7.645278] systemd[1]: Mounting FUSE Control File System... buildbot # [ 7.649417] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 7.654271] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 7.675375] EXT4-fs (vda): re-mounted a7bf2a29-8ec0-494e-b928-b90df1805209. buildbot # [ 7.682641] systemd-oomd[271]: No swap; memory pressure usage will be degraded buildbot # [ 7.687045] systemd[1]: Finished Remount Root and Kernel File Systems. buildbot # [ 7.692318] systemd[1]: Listening on Disk Image Download Service Socket. buildbot # [ 7.701352] systemd[1]: Starting Flush Journal to Persistent Storage... buildbot # [ 7.703808] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore buildbot # [ 7.713562] systemd[1]: Starting Load/Save OS Random Seed... buildbot # [ 7.720301] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.723359] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. buildbot # [ 7.795550] systemd[1]: Mounted FUSE Control File System. buildbot # [ 7.827326] systemd-journald[268]: Received client request to flush runtime journal. buildbot # [ 7.864795] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 7.866809] systemd[1]: Finished Load/Save OS Random Seed. buildbot # [ 7.872233] systemd[1]: Reached target First Boot Complete. buildbot # [ 7.873854] systemd[1]: Finished Flush Journal to Persistent Storage. buildbot # [ 7.878005] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 7.881449] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 7.978129] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 7.979126] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 7.981458] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 8.216329] systemd[1]: Mounting /run/wrappers... buildbot # [ 8.232944] systemd-udevd[301]: Using default interface naming scheme 'v260'. buildbot # [ 8.265112] systemd[1]: Mounted /run/wrappers. buildbot # [ 8.266086] systemd[1]: Reached target Local File Systems. buildbot # [ 8.272160] systemd[1]: Listening on Boot Loader Control Service Socket. buildbot # [ 8.275911] systemd[1]: Starting register-nix-paths.service... buildbot # [ 8.281256] systemd[1]: Starting Create SUID/SGID Wrappers... buildbot # [ 8.284390] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. buildbot # [ 8.292428] systemd[1]: Starting Save Transient machine-id to Disk... buildbot # [ 8.318278] systemd[1]: Starting Create System Files and Directories... buildbot # [ 8.417811] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. buildbot # [ 8.432199] systemd[1]: Finished Save Transient machine-id to Disk. buildbot # [ 8.486287] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 8.555535] systemd[1]: Finished Create System Files and Directories. buildbot # [ 8.572346] systemd[1]: Starting Rebuild Journal Catalog... buildbot # [ 8.586137] systemd[1]: Starting Record System Boot/Shutdown in UTMP... buildbot # [ 8.712733] systemd[1]: Finished Record System Boot/Shutdown in UTMP. buildbot # [ 8.805385] systemd[1]: Finished Rebuild Journal Catalog. buildbot # [ 8.817719] systemd[1]: Starting Update is Completed... buildbot # [ 8.905924] systemd[1]: Finished Update is Completed. buildbot # [ 9.350111] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. buildbot # [ 9.356203] systemd[1]: Finished Create SUID/SGID Wrappers. buildbot # [ 9.630854] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 9.643103] systemd[1]: Finished register-nix-paths.service. buildbot # [ 9.644100] systemd[1]: Reached target System Initialization. buildbot # [ 9.644980] systemd[1]: Started Discard unused filesystem blocks once a week. buildbot # [ 9.645998] systemd[1]: Started Daily Cleanup of Temporary Directories. buildbot # [ 9.646945] systemd[1]: Reached target Timer Units. buildbot # [ 9.652276] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 9.654383] systemd[1]: Listening on Nix Daemon Socket. buildbot # [ 9.656371] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). buildbot # [ 9.660083] systemd[1]: Listening on Hostname Service Socket. buildbot # [ 9.663672] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. buildbot # [ 9.668759] systemd[1]: Reached target Socket Units. buildbot # [ 9.670996] systemd[1]: Reached target Basic System. buildbot # [ 9.673333] systemd[1]: Starting Import lastlog data into lastlog2 database... buildbot # [ 9.680265] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 9.681273] systemd[1]: Starting Post-Boot Actions... buildbot # [ 9.694262] systemd[1]: Started Reset console on configuration changes. buildbot # [ 9.718730] systemd[1]: Starting resolvconf update... buildbot # [ 9.721925] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met. buildbot # [ 9.756386] systemd[1]: Starting D-Bus System Message Bus... buildbot # [ 9.827701] systemd[1]: Finished Post-Boot Actions. buildbot # [ 9.851740] nsncd[389]: Jul 05 06:00:06.505 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 9.861509] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 9.868117] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 9.874235] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 9.880320] systemd[1]: Starting User Login Management... buildbot # [ 9.905610] systemd[1]: Finished Import lastlog data into lastlog2 database. buildbot # [ 9.951271] dbus-broker-launch[393]: Looking up NSS user entry for 'systemd-timesync'... buildbot # [ 9.966161] dbus-broker-launch[393]: NSS returned no entry for 'systemd-timesync' buildbot # [ 9.972703] dbus-broker-launch[393]: Invalid user-name in /nix/store/g5vnah3g34pvpqvbqxz0z4x8vdwa2c24-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" buildbot # [ 10.016370] systemd[1]: Started D-Bus System Message Bus. buildbot # [ 10.048634] systemd-logind[410]: New seat seat0. buildbot # [ 10.053021] dbus-broker-launch[393]: Ready buildbot # [ 10.057203] systemd[1]: Started User Login Management. buildbot # [ 10.064142] systemd[1]: Stopped target Host and Network Name Lookups. buildbot # [ 10.066555] systemd[1]: Stopping Host and Network Name Lookups... buildbot # [ 10.068492] systemd[1]: Stopped target User and Group Name Lookups. buildbot # [ 10.073522] systemd[1]: Stopping User and Group Name Lookups... buildbot # [ 10.076741] systemd[1]: Starting linger-users.service... buildbot # [ 10.080833] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... buildbot # [ 10.084218] systemd[1]: nscd.service: Deactivated successfully. buildbot # [ 10.087641] systemd[1]: Stopped Name Service Cache Daemon (nsncd). buildbot # [ 10.122588] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 10.172732] systemd[1]: linger-users.service: Deactivated successfully. buildbot # [ 10.178855] systemd[1]: Finished linger-users.service. buildbot # [ 10.203945] systemd[1]: Finished resolvconf update. buildbot # [ 10.206661] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 10.211810] nsncd[456]: Jul 05 06:00:06.865 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 10.217337] systemd[1]: Reached target Preparation for Network. buildbot # [ 10.220865] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 10.224272] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 10.227832] systemd[1]: Starting DHCP Client... buildbot # [ 10.230368] systemd[1]: Starting Extra networking commands.... buildbot # [ 10.443523] dhcpcd[485]: dhcpcd-10.3.2 starting buildbot # [ 10.459653] dhcpcd[516]: dev: loaded udev buildbot # [ 10.465823] dhcpcd[516]: no valid interfaces found buildbot # [ 10.469299] dhcpcd[516]: libudev: received NULL device buildbot # [ 10.471941] dhcpcd[516]: no valid interfaces found buildbot # [ 10.474644] dhcpcd[516]: libudev: received NULL device buildbot # [ 10.504687] systemd[1]: Finished Extra networking commands.. buildbot # [ 10.509984] systemd[1]: Reached target Network. buildbot # [ 10.516200] systemd[1]: Starting Nginx Web Server... buildbot # [ 10.526744] systemd[1]: Starting PostgreSQL Server... buildbot # [ 10.540123] systemd[1]: Starting SSH Daemon... buildbot # [ 10.561118] systemd[1]: Starting Permit User Sessions... buildbot # [ 10.609483] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:09.0/virtio8/input/input3 buildbot # [ 10.666949] systemd[1]: Finished Permit User Sessions. buildbot # [ 10.678446] systemd[1]: Started Getty on tty1. buildbot # [ 10.679376] systemd[1]: Reached target Login Prompts. buildbot # [ 10.708867] sshd[531]: Server listening on 0.0.0.0 port 22. buildbot # [ 10.713396] sshd[531]: Server listening on :: port 22. buildbot # [ 10.718199] systemd[1]: Started SSH Daemon. buildbot # [ 10.729620] systemd[1]: Starting Setup git test repository... buildbot # [ 10.912464] setup-git-repo-start[549]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 10.916302] setup-git-repo-start[549]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 10.923569] setup-git-repo-start[549]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 10.929917] setup-git-repo-start[549]: hint: call: buildbot # [ 10.934451] setup-git-repo-start[549]: hint: buildbot # [ 10.942649] setup-git-repo-start[549]: hint: git config --global init.defaultBranch buildbot # [ 10.943854] setup-git-repo-start[549]: hint: buildbot # [ 10.944722] setup-git-repo-start[549]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 10.956743] setup-git-repo-start[549]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 10.958185] setup-git-repo-start[549]: hint: buildbot # [ 10.958819] setup-git-repo-start[549]: hint: git branch -m buildbot # [ 10.959694] setup-git-repo-start[549]: hint: buildbot # [ 10.965612] setup-git-repo-start[549]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 10.972168] setup-git-repo-start[549]: Initialized empty Git repository in /srv/repos/test-flake.git/ buildbot # [ 10.977755] postgresql-pre-start[545]: The files belonging to this database system will be owned by user "postgres". buildbot # [ 10.983620] postgresql-pre-start[545]: This user must also own the server process. buildbot # [ 10.989131] postgresql-pre-start[545]: The database cluster will be initialized with locale "en_US.UTF-8". buildbot # [ 10.991620] postgresql-pre-start[545]: The default database encoding has accordingly been set to "UTF8". buildbot # [ 11.000076] postgresql-pre-start[545]: The default text search configuration will be set to "english". buildbot # [ 11.004423] postgresql-pre-start[545]: Data page checksums are disabled. buildbot # [ 11.012290] postgresql-pre-start[545]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok buildbot # [ 11.013668] postgresql-pre-start[545]: creating subdirectories ... ok buildbot # [ 11.014564] postgresql-pre-start[545]: selecting dynamic shared memory implementation ... posix buildbot # [ 11.015853] nginx-pre-start[543]: nginx: the configuration file /nix/store/kgd165b034944lbrzjff4v50mp3xf5wn-nginx.conf syntax is ok buildbot # [ 11.037056] nginx-pre-start[543]: nginx: configuration file /nix/store/kgd165b034944lbrzjff4v50mp3xf5wn-nginx.conf test is successful buildbot # [ 11.041229] systemd[1]: Started Nginx Web Server. buildbot # [ 11.048077] setup-git-repo-start[552]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 11.055618] setup-git-repo-start[552]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 11.062623] setup-git-repo-start[552]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 11.072441] setup-git-repo-start[552]: hint: call: buildbot # [ 11.075570] setup-git-repo-start[552]: hint: buildbot # [ 11.080562] setup-git-repo-start[552]: hint: git config --global init.defaultBranch buildbot # [ 11.084259] setup-git-repo-start[552]: hint: buildbot # [ 11.089705] setup-git-repo-start[552]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 11.102178] setup-git-repo-start[552]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 11.103610] setup-git-repo-start[552]: hint: buildbot # [ 11.104421] setup-git-repo-start[552]: hint: git branch -m buildbot # [ 11.109495] setup-git-repo-start[552]: hint: buildbot # [ 11.116211] setup-git-repo-start[552]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 11.124127] setup-git-repo-start[552]: Initialized empty Git repository in /tmp/test-flake/.git/ buildbot # [ 11.254667] postgresql-pre-start[545]: selecting default "max_connections" ... 100 buildbot # [ 11.275044] setup-git-repo-start[562]: warning: you don't have Internet access; disabling some network-dependent features buildbot # [ 11.366003] postgresql-pre-start[545]: selecting default "shared_buffers" ... 128MB buildbot # [ 11.386076] setup-git-repo-start[570]: [master (root-commit) 6517962] Initial commit buildbot # [ 11.387482] setup-git-repo-start[570]: 1 file changed, 39 insertions(+) buildbot # [ 11.390331] setup-git-repo-start[570]: create mode 100644 flake.nix buildbot # [ 11.501610] setup-git-repo-start[576]: To /srv/repos/test-flake.git buildbot # [ 11.505948] setup-git-repo-start[576]: * [new branch] master -> master buildbot # [ 11.510269] setup-git-repo-start[576]: branch 'master' set up to track 'origin/master'. buildbot # [ 11.637216] setup-git-repo-start[595]: warning: you don't have Internet access; disabling some network-dependent features buildbot # [ 11.795967] setup-git-repo-start[595]: this derivation will be built: buildbot # [ 11.800608] setup-git-repo-start[595]: /nix/store/lqx3p33b67znqs9dzp4mdp81b11fiwzz-skippable-test.drv buildbot # [ 11.872666] systemd[1]: Starting Virtual Console Setup... buildbot # [ 11.917148] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 11.950909] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 11.954178] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 11.968762] systemd[1]: Starting Virtual Console Setup... buildbot # [ 12.056185] setup-git-repo-start[595]: building '/nix/store/lqx3p33b67znqs9dzp4mdp81b11fiwzz-skippable-test.drv'... buildbot # [ 12.107201] systemd[1]: Finished Setup git test repository. buildbot # [ 12.252607] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. buildbot # [ 12.319181] systemd[1]: Condition check resulted in /dev/ttyAMA0 being skipped. buildbot # [ 12.333955] systemd[1]: Started backdoor.service. buildbot # [ 12.373364] 8021q: 802.1Q VLAN Support v1.8 buildbot # connecting to host... buildbot: Guest shell says: b'Spawning backdoor root shell...\n' buildbot: connected to guest root shell buildbot: (connecting took 12.81 seconds) buildbot: (finished: waiting for the VM to finish booting, in 13.25 seconds) buildbot # [ 12.516864] cfg80211: Loading compiled-in X.509 certificates for regulatory database buildbot # [ 12.509914] (udev-worker)[591]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 12.517545] (udev-worker)[580]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 12.526882] (udev-worker)[580]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 12.576590] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' buildbot # [ 12.577079] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' buildbot # [ 12.582743] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 buildbot # [ 12.583068] cfg80211: failed to load regulatory.db buildbot # [ 12.576141] systemd-vconsole-setup[603]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 12.587177] systemd[1]: Finished Virtual Console Setup. buildbot: (finished: waiting for unit sshd.service, in 13.38 seconds) buildbot: waiting for unit setup-git-repo.service buildbot: (finished: waiting for unit setup-git-repo.service, in 0.09 seconds) buildbot: waiting for unit multi-user.target buildbot # [ 12.867361] systemd[1]: Condition check resulted in Virtio network device being skipped. buildbot # [ 12.884926] systemd[1]: Starting Address configuration of eth1... buildbot # [ 12.922149] 8021q: adding VLAN 0 to HW filter on device eth0 buildbot # [ 12.905238] dhcpcd[516]: eth0: waiting for carrier buildbot # [ 12.908946] dhcpcd[516]: eth0: carrier acquired buildbot # [ 12.932747] dhcpcd[516]: DUID 00:01:00:01:31:dc:af:69:52:54:00:12:34:56 buildbot # [ 12.935758] dhcpcd[516]: eth0: IAID 00:12:34:56 buildbot # [ 12.938923] dhcpcd[516]: eth0: adding address fe80::5054:ff:fe12:3456 buildbot # [ 13.022056] 8021q: adding VLAN 0 to HW filter on device eth1 buildbot # [ 13.022429] network-addresses-eth1-start[650]: adding address 192.168.1.1/24... done buildbot # [ 13.037992] network-addresses-eth1-start[650]: adding address 2001:db8:1::1/64... done buildbot # [ 13.058053] systemd[1]: Finished Address configuration of eth1. buildbot # [ 13.073011] systemd-logind[410]: Watching system buttons on /dev/input/event0 (gpio-keys) buildbot # [ 13.172678] mousedev: PS/2 mouse device common for all mice buildbot # [ 13.323337] systemd-logind[410]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) buildbot # [ 13.681449] dhcpcd[516]: eth0: soliciting a DHCP lease buildbot # [ 13.690491] dhcpcd[516]: eth0: offered 10.0.2.15 from 10.0.2.2 buildbot # [ 13.697378] dhcpcd[516]: eth0: probing address 10.0.2.15/24 buildbot # [ 14.402617] postgresql-pre-start[545]: selecting default time zone ... UTC buildbot # [ 14.408195] postgresql-pre-start[545]: creating configuration files ... ok buildbot # [ 14.880218] postgresql-pre-start[545]: running bootstrap script ... ok buildbot # [ 14.970763] dhcpcd[516]: eth0: soliciting an IPv6 router buildbot # [ 14.975679] dhcpcd[516]: eth0: Router Advertisement from fe80::2 buildbot # [ 14.978357] dhcpcd[516]: eth0: adding address fec0::5054:ff:fe12:3456/64 buildbot # [ 14.979322] dhcpcd[516]: eth0: adding route to fec0::/64 buildbot # [ 14.980351] dhcpcd[516]: eth0: adding default route via fe80::2 buildbot # [ 15.396305] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. buildbot # [ 15.400681] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 15.401780] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 15.402514] systemd[1]: Stopping Virtual Console Setup... buildbot # [ 15.413590] systemd[1]: Starting Virtual Console Setup... buildbot # [ 15.470691] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 15.478980] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 15.497363] systemd[1]: Starting Virtual Console Setup... buildbot # [ 15.525419] systemd-logind[410]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) buildbot # [ 15.899954] postgresql-pre-start[545]: performing post-bootstrap initialization ... ok buildbot # [ 15.924163] systemd-vconsole-setup[704]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 15.936515] systemd[1]: Finished Virtual Console Setup. buildbot # [ 16.028807] postgresql-pre-start[545]: syncing data to disk ... ok buildbot # [ 16.029767] postgresql-pre-start[545]: initdb: warning: enabling "trust" authentication for local connections buildbot # [ 16.031063] postgresql-pre-start[545]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. buildbot # [ 16.033319] postgresql-pre-start[545]: Success. You can now start the database server using: buildbot # [ 16.034560] postgresql-pre-start[545]: pg_ctl -D /var/lib/postgresql/17 -l logfile start buildbot # [ 16.148003] postgres[710]: [710] LOG: starting PostgreSQL 17.10 on aarch64-unknown-linux-gnu, compiled by clang version 21.1.8, 64-bit buildbot # [ 16.159840] postgres[710]: [710] LOG: listening on IPv6 address "::1", port 5432 buildbot # [ 16.161452] postgres[710]: [710] LOG: listening on IPv4 address "127.0.0.1", port 5432 buildbot # [ 16.163186] postgres[710]: [710] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" buildbot # [ 16.171607] postgres[716]: [716] LOG: database system was shut down at 2026-07-05 06:00:12 GMT buildbot # [ 16.181826] postgres[710]: [710] LOG: database system is ready to accept connections buildbot # [ 16.186021] systemd[1]: Started PostgreSQL Server. buildbot # [ 16.191025] systemd[1]: Starting PostgreSQL Setup Scripts... buildbot # [ 16.448460] postgresql-setup-start[730]: CREATE DATABASE buildbot # [ 16.496901] postgresql-setup-start[746]: CREATE ROLE buildbot # [ 16.519537] postgresql-setup-start[748]: ALTER DATABASE buildbot # [ 16.526641] systemd[1]: Finished PostgreSQL Setup Scripts. buildbot # [ 16.529704] systemd[1]: Reached target PostgreSQL. buildbot # [ 16.532512] systemd[1]: Starting Buildbot Continuous Integration Server.... buildbot # [ 16.584840] buildbot-master-pre-start[753]: mkdir: created directory '/var/lib/buildbot/master' buildbot # [ 18.800545] dhcpcd[516]: eth0: leased 10.0.2.15 for 86400 seconds buildbot # [ 18.802623] dhcpcd[516]: eth0: adding route to 10.0.2.0/24 buildbot # [ 18.803699] dhcpcd[516]: eth0: adding default route via 10.0.2.2 buildbot # [ 18.939585] systemd[1]: Started DHCP Client. buildbot # [ 22.386341] buildbot-master-pre-start[755]: updating existing installation buildbot # [ 22.386510] buildbot-master-pre-start[755]: not touching existing buildbot.tac buildbot # [ 22.386547] buildbot-master-pre-start[755]: creating buildbot.tac.new instead buildbot # [ 22.386578] buildbot-master-pre-start[755]: creating /var/lib/buildbot/master/master.cfg.sample buildbot # [ 22.386608] buildbot-master-pre-start[755]: creating database (postgresql://@/buildbot) buildbot # [ 22.386641] buildbot-master-pre-start[755]: buildmaster configured in /var/lib/buildbot/master buildbot # [ 22.809718] systemd[1]: Started Buildbot Continuous Integration Server.. buildbot # [ 22.815624] systemd[1]: Started Buildbot Worker.. buildbot # [ 22.820223] systemd[1]: Reached target Multi-User System. buildbot # [ 22.821110] systemd[1]: Startup finished in 941ms (kernel) + 4.146s (initrd) + 17.730s (userspace) = 22.817s. buildbot: (finished: waiting for unit multi-user.target, in 10.30 seconds) subtest: Master and worker services start buildbot: waiting for unit buildbot-master.service buildbot: (finished: waiting for unit buildbot-master.service, in 0.10 seconds) buildbot: waiting for unit buildbot-worker.service buildbot: (finished: waiting for unit buildbot-worker.service, in 0.08 seconds) buildbot: waiting for TCP port 8010 on localhost buildbot # [ 24.513411] twistd[855]: Starting worker local-worker-000 buildbot # [ 24.513644] twistd[855]: 2026-07-05T06:00:20+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py... buildbot # [ 24.517878] twistd[855]: 2026-07-05T06:00:21+0000 [-] Loaded. buildbot # [ 24.517983] twistd[855]: 2026-07-05T06:00:21+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 24.518039] twistd[855]: 2026-07-05T06:00:21+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 24.518081] twistd[855]: 2026-07-05T06:00:21+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 24.518115] twistd[855]: 2026-07-05T06:00:21+0000 [-] recording hostname in twistd.hostname buildbot # [ 24.518146] twistd[855]: 2026-07-05T06:00:21+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 24.529073] twistd[855]: 2026-07-05T06:00:21+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect in 2.397078193442396 seconds. buildbot # [ 24.541335] twistd[855]: 2026-07-05T06:00:21+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 26.533260] twistd[854]: 2026-07-05T06:00:20+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac... buildbot # [ 26.535353] twistd[854]: 2026-07-05T06:00:23+0000 [-] Loaded. buildbot # [ 26.536298] twistd[854]: 2026-07-05T06:00:23+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 26.538822] twistd[854]: 2026-07-05T06:00:23+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 26.540927] twistd[854]: 2026-07-05T06:00:23+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0 buildbot # [ 26.550851] twistd[854]: 2026-07-05T06:00:23+0000 [-] Loading configuration from '/nix/store/d6jn4x7sfbcly7c22dghrp43cnw0xdrm-master.cfg' buildbot # [ 26.941402] twistd[855]: 2026-07-05T06:00:23+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 26.945329] twistd[855]: 2026-07-05T06:00:23+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect in 2.2851283074748108 seconds. buildbot # [ 26.948003] twistd[855]: 2026-07-05T06:00:23+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 27.422175] twistd[854]: 2026-07-05T06:00:24+0000 [-] Setting up database with URL 'postgresql://@/buildbot' buildbot # [ 27.543288] twistd[854]: 2026-07-05T06:00:24+0000 [-] adding 9 new builders, removing 0 buildbot # [ 27.644145] twistd[854]: 2026-07-05T06:00:24+0000 [-] adding 3 new services, removing 0 buildbot # [ 27.838258] twistd[854]: 2026-07-05T06:00:24+0000 [-] adding 1 new change_sources, removing 0 buildbot # [ 27.845292] twistd[854]: 2026-07-05T06:00:24+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 27.854643] twistd[854]: 2026-07-05T06:00:24+0000 [-] adding 14 new schedulers, removing 0 buildbot # [ 28.037386] twistd[854]: 2026-07-05T06:00:24+0000 [-] BuildbotSite starting on 8010 buildbot # [ 28.040377] twistd[854]: 2026-07-05T06:00:24+0000 [buildbot.www.service.BuildbotSite#info] Starting factory buildbot # [ 28.042384] twistd[854]: 2026-07-05T06:00:24+0000 [-] adding 5 new workers, removing 0 buildbot # [ 28.052594] twistd[854]: 2026-07-05T06:00:24+0000 [-] PBServerFactory starting on 9989 buildbot # [ 28.053717] twistd[854]: 2026-07-05T06:00:24+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory buildbot # [ 28.075723] twistd[854]: 2026-07-05T06:00:24+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 28.077609] twistd[854]: 2026-07-05T06:00:24+0000 [-] recording hostname in twistd.hostname buildbot # [ 28.079107] twistd[854]: 2026-07-05T06:00:24+0000 [-] message from master: attached buildbot # [ 28.081563] twistd[854]: 2026-07-05T06:00:24+0000 [-] Got workerinfo from '__Janitor' buildbot # [ 28.092053] twistd[854]: 2026-07-05T06:00:24+0000 [-] bot attached buildbot # [ 28.093983] twistd[854]: 2026-07-05T06:00:24+0000 [-] Worker __Janitor attached to __Janitor buildbot # [ 28.095097] twistd[854]: 2026-07-05T06:00:24+0000 [-] message from master: attached buildbot # [ 28.154006] sshd-session[919]: Accepted publickey for root from ::1 port 57640 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 28.159238] twistd[854]: 2026-07-05T06:00:24+0000 [-] BuildMaster is running buildbot # [ 28.171154] sshd-session[919]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 28.205043] systemd-logind[410]: New session '1' of user 'root' with class 'user' and type 'tty'. buildbot # [ 28.214873] systemd[1]: Created slice Slice /user/0. buildbot # [ 28.219065] systemd[1]: Starting User Runtime Directory /run/user/0... buildbot # [ 28.268168] systemd[1]: Finished User Runtime Directory /run/user/0. buildbot # [ 28.273752] systemd[1]: Starting User Manager for UID 0... buildbot # [ 28.314291] (systemd)[925]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 28.320514] systemd-logind[410]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'. buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded! buildbot: (finished: waiting for TCP port 8010 on localhost, in 5.40 seconds) buildbot: waiting for success: curl --fail --head http://localhost:8010 buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 buildbot # [ 28.714546] systemd[925]: Queued start job for default target Main User Target. buildbot # [ 28.717661] systemd[925]: Created slice User Application Slice. buildbot # [ 28.721480] systemd[925]: Started Daily Cleanup of User's Temporary Directories. buildbot # [ 28.722802] systemd[925]: Reached target Paths. buildbot # [ 28.724639] systemd[925]: Reached target Timers. buildbot # [ 28.726267] systemd[925]: Starting D-Bus User Message Bus Socket... buildbot # [ 28.728339] systemd[925]: Starting Create User Files and Directories... buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.14 seconds) (finished: subtest: Master and worker services start, in 5.72 seconds) buildbot: waiting for success: curl http://localhost:8010/api/v2/projects buildbot # [ 28.784575] systemd[925]: Finished Create User Files and Directories. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 9083 0 0100 266 100 266 0 0 7334 0 0100 266 100 266 0 0 6148 0 [ 28.851739] systemd[925]: Listening on D-Bus User Message Bus Socket. buildbot # 0 buildbot # [ 28.858378] systemd[925]: Reached target Sockets. buildbot # [ 28.859157] systemd[925]: Reached target Basic System. buildbot # [ 28.859891] systemd[925]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system buildbot # [ 28.861817] systemd[925]: Reached target Main User Target. buildbot # [ 28.862711] systemd[925]: Startup finished in 509ms. buildbot # [ 28.863589] systemd[1]: Started User Manager for UID 0. buildbot # [ 28.867736] systemd[1]: Started Session 1 of User root. buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.14 seconds) subtest: Wait for poller to initialize buildbot: waiting for success: journalctl -u buildbot-master.service | grep "gitpoller: processing changes from" buildbot # [ 28.908740] sshd-session[949]: Received disconnect from ::1 port 57640:11: disconnected by user buildbot # [ 28.914170] sshd-session[949]: Disconnected from user root ::1 port 57640 buildbot # [ 28.915427] sshd-session[919]: pam_unix(sshd:session): session closed for user root buildbot # [ 28.923716] systemd[1]: session-1.scope: Deactivated successfully. buildbot # [ 28.927168] systemd-logind[410]: Session 1 logged out. Waiting for processes to exit. buildbot # [ 28.936562] systemd-logind[410]: Removed session 1. buildbot # [ 29.129493] sshd-session[960]: Accepted publickey for root from ::1 port 57646 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 29.149879] sshd-session[960]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 29.168474] systemd-logind[410]: New session '3' of user 'root' with class 'user' and type 'tty'. buildbot # [ 29.182630] systemd[1]: Started Session 3 of User root. buildbot # [ 29.234947] twistd[855]: 2026-07-05T06:00:25+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 29.249593] sshd-session[963]: Received disconnect from ::1 port 57646:11: disconnected by user buildbot # [ 29.250914] sshd-session[963]: Disconnected from user root ::1 port 57646 buildbot # [ 29.251920] sshd-session[960]: pam_unix(sshd:session): session closed for user root buildbot # [ 29.269385] systemd[1]: session-3.scope: Deactivated successfully. buildbot # [ 29.272395] twistd[855]: 2026-07-05T06:00:25+0000 [Broker,client] message from master: attached buildbot # [ 29.275981] twistd[854]: 2026-07-05T06:00:25+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=43282) buildbot # [ 29.283290] systemd-logind[410]: Session 3 logged out. Waiting for processes to exit. buildbot # [ 29.288157] twistd[854]: 2026-07-05T06:00:25+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000' buildbot # [ 29.293588] systemd-logind[410]: Removed session 3. buildbot # [ 29.310894] twistd[854]: 2026-07-05T06:00:25+0000 [-] bot attached buildbot # [ 29.313451] twistd[854]: 2026-07-05T06:00:25+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect buildbot # [ 29.318329] twistd[854]: 2026-07-05T06:00:25+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot buildbot # [ 29.319939] twistd[854]: 2026-07-05T06:00:25+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval buildbot # [ 29.340255] twistd[854]: 2026-07-05T06:00:25+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval buildbot # [ 29.341796] twistd[854]: 2026-07-05T06:00:25+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed buildbot # [ 29.343446] twistd[854]: 2026-07-05T06:00:25+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure buildbot # [ 29.378992] twistd[854]: 2026-07-05T06:00:25+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build buildbot # [ 29.386411] twistd[854]: 2026-07-05T06:00:25+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect buildbot # [ 29.392579] twistd[855]: 2026-07-05T06:00:25+0000 [Broker,client] message from master: attached buildbot # [ 29.393794] twistd[855]: 2026-07-05T06:00:25+0000 [Broker,client] message from master: attached buildbot # [ 29.400084] twistd[855]: 2026-07-05T06:00:25+0000 [Broker,client] message from master: attached buildbot # [ 29.401694] twistd[855]: 2026-07-05T06:00:25+0000 [Broker,client] message from master: attached buildbot # [ 29.402962] twistd[855]: 2026-07-05T06:00:25+0000 [Broker,client] message from master: attached buildbot # [ 29.432231] twistd[855]: 2026-07-05T06:00:25+0000 [Broker,client] message from master: attached buildbot # [ 29.433423] twistd[855]: 2026-07-05T06:00:25+0000 [Broker,client] message from master: attached buildbot # [ 29.434574] twistd[855]: 2026-07-05T06:00:25+0000 [Broker,client] message from master: attached buildbot # [ 29.435730] twistd[855]: 2026-07-05T06:00:25+0000 [Broker,client] Connected to buildmaster; worker is ready buildbot # [ 29.481540] twistd[855]: 2026-07-05T06:00:25+0000 [Broker,client] sending application-level keepalives every 600 seconds buildbot # [ 29.483083] twistd[854]: 2026-07-05T06:00:26+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: (finished: waiting for success: journalctl -u buildbot-master.service | grep "gitpoller: processing changes from", in 1.15 seconds) Poller has started processing (finished: subtest: Wait for poller to initialize, in 1.15 seconds) subtest: Push new commit to trigger poller buildbot: must succeed: cd /tmp/test-flake echo '# Updated at test time' >> flake.nix git add flake.nix git commit -m 'Test commit to trigger poller' git push origin master buildbot # Enumerating objects: 5, done. buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done. buildbot # Compressing objects: 50% (1/2)Compressing objects: 100% (2/2)Compressing objects: 100% (2/2), done. buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 300 bytes | 150.00 KiB/s, done. buildbot # Total 3 (delta 1), reused 0 (delta 0), pack-reused 0 (from 0) buildbot # To /srv/repos/test-flake.git buildbot # 6517962..1367bd8 master -> master buildbot: (finished: must succeed: cd /tmp/test-flake echo '# Updated at test time' >> flake.nix git add flake.nix git commit -m 'Test commit to trigger poller' git push origin master , in 0.14 seconds) Pushed new commit to repository (finished: subtest: Push new commit to trigger poller, in 0.14 seconds) subtest: Poller triggers builds and verifies results buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3669 0 0100 51 100 51 0 0 3125 0 0100 51 100 51 0 0 2724 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.06 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3044 0 0100 51 100 51 0 0 2252 0 0100 51 100 51 0 0 1845 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3934 0 0100 51 100 51 0 0 2865 0 0100 51 100 51 0 0 2334 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2205 0 0100 51 100 51 0 0 1897 0 0100 51 100 51 0 0 1682 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4069 0 0100 51 100 51 0 0 3040 0 0100 51 100 51 0 0 2466 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2657 0 0100 51 100 51 0 0 2214 0 0100 51 100 51 0 0 1916 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4158 0 0100 51 100 51 0 0 3002 0 0100 51 100 51 0 0 2401 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4000 0 0100 51 100 51 0 0 2485 0 0100 51 100 51 0 0 1982 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds) buildbot # [ 38.115499] sshd-session[1034]: Accepted publickey for root from ::1 port 35530 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 38.134748] sshd-session[1034]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 38.149714] systemd-logind[410]: New session '4' of user 'root' with class 'user' and type 'tty'. buildbot # [ 38.157542] systemd[1]: Started Session 4 of User root. buildbot # [ 38.196371] sshd-session[1037]: Received disconnect from ::1 port 35530:11: disconnected by user buildbot # [ 38.198558] sshd-session[1037]: Disconnected from user root ::1 port 35530 buildbot # [ 38.199945] sshd-session[1034]: pam_unix(sshd:session): session closed for user root buildbot # [ 38.215286] systemd[1]: session-4.scope: Deactivated successfully. buildbot # [ 38.224522] systemd-logind[410]: Session 4 logged out. Waiting for processes to exit. buildbot # [ 38.226657] systemd-logind[410]: Removed session 4. buildbot # [ 38.417132] sshd-session[1042]: Accepted publickey for root from ::1 port 35538 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 38.439393] sshd-session[1042]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 38.451723] systemd-logind[410]: New session '5' of user 'root' with class 'user' and type 'tty'. buildbot # [ 38.464561] systemd[1]: Started Session 5 of User root. buildbot # [ 38.518665] sshd-session[1045]: Received disconnect from ::1 port 35538:11: disconnected by user buildbot # [ 38.522946] sshd-session[1045]: Disconnected from user root ::1 port 35538 buildbot # [ 38.525216] sshd-session[1042]: pam_unix(sshd:session): session closed for user root buildbot # [ 38.533428] systemd[1]: session-5.scope: Deactivated successfully. buildbot # [ 38.537678] systemd-logind[410]: Session 5 logged out. Waiting for processes to exit. buildbot # [ 38.540325] systemd-logind[410]: Removed session 5. buildbot # [ 38.559773] twistd[854]: 2026-07-05T06:00:35+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # [ 38.600734] twistd[854]: 2026-07-05T06:00:35+0000 [-] gitpoller: processing 1 changes: ['1367bd8d2ed1555fde8493c49a4f847689baba10'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master" buildbot # [ 38.706350] twistd[854]: 2026-07-05T06:00:35+0000 [-] added change with revision 1367bd8d2ed1555fde8493c49a4f847689baba10 to database buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2365 0 0100 51 100 51 0 0 1963 0 0100 51 100 51 0 0 1716 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4444 0 0100 51 100 51 0 0 3256 0 0100 51 100 51 0 0 2610 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3883 0 0100 51 100 51 0 0 2831 0 0100 51 100 51 0 0 2280 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3053 0 0100 51 100 51 0 0 2178 0 0100 51 100 51 0 0 1761 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4137 0 0100 51 100 51 0 0 2923 0 0100 51 100 51 0 0 2271 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot # [ 43.769789] twistd[854]: 2026-07-05T06:00:40+0000 [-] added buildset 1 to database buildbot # [ 43.935985] twistd[854]: 2026-07-05T06:00:40+0000 [-] starting build using worker buildbot # [ 43.948288] twistd[854]: 2026-07-05T06:00:40+0000 [-] .startBuild buildbot # [ 44.031833] twistd[854]: 2026-07-05T06:00:40+0000 [-] acquireLocks(worker , locks []) buildbot # [ 44.036481] twistd[854]: 2026-07-05T06:00:40+0000 [-] starting build .. pinging the worker buildbot # [ 44.042550] twistd[854]: 2026-07-05T06:00:40+0000 [-] sending ping buildbot # [ 44.043751] twistd[854]: 2026-07-05T06:00:40+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 44.047077] twistd[855]: 2026-07-05T06:00:40+0000 [Broker,client] message from master: ping buildbot # [ 44.070005] twistd[854]: 2026-07-05T06:00:40+0000 [-] : RemoteCommand.run [0] buildbot # [ 44.076208] twistd[854]: 2026-07-05T06:00:40+0000 [-] command '['git', '--version']' in dir 'build' buildbot # [ 44.077678] twistd[855]: 2026-07-05T06:00:40+0000 [Broker,client] (command 0): startCommand:shell buildbot # [ 44.079005] twistd[855]: 2026-07-05T06:00:40+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand buildbot # [ 44.084132] twistd[855]: 2026-07-05T06:00:40+0000 [Broker,client] (command ['git', '--version']): git --version buildbot # [ 44.085656] twistd[855]: 2026-07-05T06:00:40+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 44.087949] twistd[855]: 2026-07-05T06:00:40+0000 [Broker,client] (command ['git', '--version']): watching logfiles {} buildbot # [ 44.094751] twistd[855]: 2026-07-05T06:00:40+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version'] buildbot # [ 44.096681] twistd[855]: 2026-07-05T06:00:40+0000 [Broker,client] (command ['git', '--version']): using PTY: False buildbot # [ 44.107756] twistd[855]: 2026-07-05T06:00:40+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.025540 buildbot # [ 44.109978] twistd[855]: 2026-07-05T06:00:40+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) buildbot # [ 44.134557] twistd[854]: 2026-07-05T06:00:40+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.169180] twistd[854]: 2026-07-05T06:00:40+0000 [-] : RemoteCommand.run [1] buildbot # [ 44.177301] twistd[855]: 2026-07-05T06:00:40+0000 [Broker,client] (command 1): startCommand:stat buildbot # [ 44.178639] twistd[855]: 2026-07-05T06:00:40+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched' buildbot # [ 44.185725] twistd[855]: 2026-07-05T06:00:40+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) buildbot # [ 44.189292] twistd[854]: 2026-07-05T06:00:40+0000 [Broker,0,127.0.0.1] rc=2 buildbot # [ 44.197300] twistd[854]: 2026-07-05T06:00:40+0000 [-] : RemoteCommand.run [2] buildbot # [ 44.225173] twistd[855]: 2026-07-05T06:00:40+0000 [Broker,client] (command 2): startCommand:mkdir buildbot # [ 44.226609] twistd[855]: 2026-07-05T06:00:40+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) buildbot # [ 44.232365] twistd[854]: 2026-07-05T06:00:40+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.236734] twistd[854]: 2026-07-05T06:00:40+0000 [-] : RemoteCommand.run [3] buildbot # [ 44.272936] twistd[855]: 2026-07-05T06:00:40+0000 [Broker,client] (command 3): startCommand:downloadFile buildbot # [ 44.278993] twistd[855]: 2026-07-05T06:00:40+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) buildbot # [ 44.287215] twistd[854]: 2026-07-05T06:00:40+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.293787] twistd[854]: 2026-07-05T06:00:40+0000 [-] : RemoteCommand.run [4] buildbot # [ 44.331107] twistd[855]: 2026-07-05T06:00:40+0000 [Broker,client] (command 4): startCommand:listdir buildbot # [ 44.337914] twistd[855]: 2026-07-05T06:00:40+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) buildbot # [ 44.344812] twistd[854]: 2026-07-05T06:00:40+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.356220] twistd[854]: 2026-07-05T06:00:41+0000 [-] No git repo present, making full clone buildbot # [ 44.358975] twistd[854]: 2026-07-05T06:00:41+0000 [-] : RemoteCommand.run [5] buildbot # [ 44.381241] twistd[854]: 2026-07-05T06:00:41+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build' buildbot # [ 44.396459] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command 5): startCommand:shell buildbot # [ 44.398095] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand buildbot # [ 44.405176] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress buildbot # [ 44.425727] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 44.431658] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {} buildbot # [ 44.436965] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress'] buildbot # [ 44.445842] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 34670 0 0100 401 100 401 0 0 28522 0 0100 401 100 401 0 0 24402 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds) buildbot # [ 44.638723] sshd-session[1081]: Accepted publickey for root from ::1 port 46936 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 44.649061] sshd-session[1081]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 44.658546] systemd-logind[410]: New session '6' of user 'root' with class 'user' and type 'tty'. buildbot # [ 44.664607] systemd[1]: Started Session 6 of User root. buildbot # [ 44.710672] sshd-session[1087]: Received disconnect from ::1 port 46936:11: disconnected by user buildbot # [ 44.713645] sshd-session[1087]: Disconnected from user root ::1 port 46936 buildbot # [ 44.714657] sshd-session[1081]: pam_unix(sshd:session): session closed for user root buildbot # [ 44.720223] systemd[1]: session-6.scope: Deactivated successfully. buildbot # [ 44.724661] systemd-logind[410]: Session 6 logged out. Waiting for processes to exit. buildbot # [ 44.726284] systemd-logind[410]: Removed session 6. buildbot # [ 44.741478] twistd[855]: 2026-07-05T06:00:41+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.362617 buildbot # [ 44.750290] twistd[855]: 2026-07-05T06:00:41+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) buildbot # [ 44.754181] twistd[854]: 2026-07-05T06:00:41+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.777292] twistd[854]: 2026-07-05T06:00:41+0000 [-] : RemoteCommand.run [6] buildbot # [ 44.781503] twistd[854]: 2026-07-05T06:00:41+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '1367bd8d2ed1555fde8493c49a4f847689baba10']' in dir 'build' buildbot # [ 44.793019] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command 6): startCommand:shell buildbot # [ 44.797092] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '1367bd8d2ed1555fde8493c49a4f847689baba10']): RunProcess._startCommand buildbot # [ 44.805937] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '1367bd8d2ed1555fde8493c49a4f847689baba10']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f 1367bd8d2ed1555fde8493c49a4f847689baba10 buildbot # [ 44.811386] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '1367bd8d2ed1555fde8493c49a4f847689baba10']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 44.816291] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '1367bd8d2ed1555fde8493c49a4f847689baba10']): watching logfiles {} buildbot # [ 44.821981] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '1367bd8d2ed1555fde8493c49a4f847689baba10']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'1367bd8d2ed1555fde8493c49a4f847689baba10'] buildbot # [ 44.828113] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '1367bd8d2ed1555fde8493c49a4f847689baba10']): using PTY: False buildbot # [ 44.842720] twistd[855]: 2026-07-05T06:00:41+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '1367bd8d2ed1555fde8493c49a4f847689baba10']): command finished with signal None, exit code 0, elapsedTime: 0.046646 buildbot # [ 44.846767] twistd[855]: 2026-07-05T06:00:41+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) buildbot # [ 44.851892] twistd[854]: 2026-07-05T06:00:41+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.874029] twistd[854]: 2026-07-05T06:00:41+0000 [-] : RemoteCommand.run [7] buildbot # [ 44.877433] twistd[854]: 2026-07-05T06:00:41+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build' buildbot # [ 44.893011] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command 7): startCommand:shell buildbot # [ 44.896464] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand buildbot # [ 44.899745] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive buildbot # [ 44.909994] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 44.914509] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {} buildbot # [ 44.920128] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive'] buildbot # [ 44.927047] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False buildbot # [ 45.037093] twistd[855]: 2026-07-05T06:00:41+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.138894 buildbot # [ 45.043074] twistd[855]: 2026-07-05T06:00:41+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) buildbot # [ 45.046835] twistd[854]: 2026-07-05T06:00:41+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.061284] twistd[854]: 2026-07-05T06:00:41+0000 [-] : RemoteCommand.run [8] buildbot # [ 45.062882] twistd[854]: 2026-07-05T06:00:41+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build' buildbot # [ 45.081347] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command 8): startCommand:shell buildbot # [ 45.085124] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand buildbot # [ 45.086693] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD buildbot # [ 45.093411] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 45.095639] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {} buildbot # [ 45.097251] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD'] buildbot # [ 45.099189] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False buildbot # [ 45.108061] twistd[855]: 2026-07-05T06:00:41+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.024207 buildbot # [ 45.110031] twistd[855]: 2026-07-05T06:00:41+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) buildbot # [ 45.137883] twistd[854]: 2026-07-05T06:00:41+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.158559] twistd[854]: 2026-07-05T06:00:41+0000 [-] Got Git revision 1367bd8d2ed1555fde8493c49a4f847689baba10 buildbot # [ 45.160861] twistd[854]: 2026-07-05T06:00:41+0000 [-] : RemoteCommand.run [9] buildbot # [ 45.186563] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command 9): startCommand:rmdir buildbot # [ 45.187949] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand buildbot # [ 45.196093] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot buildbot # [ 45.199192] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs) buildbot # [ 45.202695] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {} buildbot # [ 45.205724] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot'] buildbot # [ 45.209606] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False buildbot # [ 45.221436] twistd[855]: 2026-07-05T06:00:41+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.035045 buildbot # [ 45.224541] twistd[855]: 2026-07-05T06:00:41+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) buildbot # [ 45.237819] twistd[854]: 2026-07-05T06:00:41+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.260465] twistd[854]: 2026-07-05T06:00:41+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): [] buildbot # [ 45.283685] twistd[854]: 2026-07-05T06:00:41+0000 [-] step 'git' complete: success (None) buildbot # [ 45.292373] twistd[854]: 2026-07-05T06:00:41+0000 [-] acquireLocks(step NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(, )]) buildbot # [ 45.312749] twistd[854]: 2026-07-05T06:00:41+0000 [-] : RemoteCommand.run [10] buildbot # [ 45.314867] twistd[854]: 2026-07-05T06:00:41+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build' buildbot # [ 45.321996] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command 10): startCommand:shell buildbot # [ 45.323249] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand buildbot # [ 45.327617] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi' buildbot # [ 45.330529] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 45.334936] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {} buildbot # [ 45.337440] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'] buildbot # [ 45.340583] twistd[855]: 2026-07-05T06:00:41+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False buildbot # [ 45.355510] twistd[855]: 2026-07-05T06:00:42+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.036678 buildbot # [ 45.358210] twistd[855]: 2026-07-05T06:00:42+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) buildbot # [ 45.365672] twistd[854]: 2026-07-05T06:00:42+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.370422] twistd[854]: 2026-07-05T06:00:42+0000 [-] : RemoteCommand.run [11] buildbot # [ 45.375970] twistd[854]: 2026-07-05T06:00:42+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build' buildbot # [ 45.409183] twistd[855]: 2026-07-05T06:00:42+0000 [Broker,client] (command 11): startCommand:shell buildbot # [ 45.415407] twistd[855]: 2026-07-05T06:00:42+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand buildbot # [ 45.422961] twistd[855]: 2026-07-05T06:00:42+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks' buildbot # [ 45.431445] twistd[855]: 2026-07-05T06:00:42+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 45.437783] twistd[855]: 2026-07-05T06:00:42+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {} buildbot # [ 45.443167] twistd[855]: 2026-07-05T06:00:42+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks'] buildbot # [ 45.452336] twistd[855]: 2026-07-05T06:00:42+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False buildbot # [ 45.566574] systemd[1]: Started Nix Daemon. buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 [ 45.695124] nix-daemon[1129]: accepted connection from pid 1128, user buildbot-worker buildbot # 0 0100 401 100 401 0 0 11681 0 0100 401 100 401 0 0 10858 0 0100 401 100 401 0 0 9635 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 29613 0 0100 401 100 401 0 0 21997 0 0100 401 100 401 0 0 17809 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 30552 0 0100 401 100 401 0 0 19177 0 0100 401 100 401 0 0 13815 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) buildbot # [ 48.153073] sshd-session[1148]: Accepted publickey for root from ::1 port 46948 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 48.174635] sshd-session[1148]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 48.190924] systemd-logind[410]: New session '7' of user 'root' with class 'user' and type 'tty'. buildbot # [ 48.196982] systemd[1]: Started Session 7 of User root. buildbot # [ 48.238625] sshd-session[1151]: Received disconnect from ::1 port 46948:11: disconnected by user buildbot # [ 48.244795] sshd-session[1151]: Disconnected from user root ::1 port 46948 buildbot # [ 48.246432] sshd-session[1148]: pam_unix(sshd:session): session closed for user root buildbot # [ 48.261489] systemd[1]: session-7.scope: Deactivated successfully. buildbot # [ 48.262793] systemd-logind[410]: Session 7 logged out. Waiting for processes to exit. buildbot # [ 48.268359] systemd-logind[410]: Removed session 7. buildbot # [ 48.465610] sshd-session[1156]: Accepted publickey for root from ::1 port 46960 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 48.487478] sshd-session[1156]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 48.500953] systemd-logind[410]: New session '8' of user 'root' with class 'user' and type 'tty'. buildbot # [ 48.513181] systemd[1]: Started Session 8 of User root. buildbot # [ 48.561340] sshd-session[1159]: Received disconnect from ::1 port 46960:11: disconnected by user buildbot # [ 48.563787] sshd-session[1159]: Disconnected from user root ::1 port 46960 buildbot # [ 48.568004] sshd-session[1156]: pam_unix(sshd:session): session closed for user root buildbot # [ 48.572103] systemd[1]: session-8.scope: Deactivated successfully. buildbot # [ 48.577787] systemd-logind[410]: Session 8 logged out. Waiting for processes to exit. buildbot # [ 48.583128] systemd-logind[410]: Removed session 8. buildbot # [ 48.587638] twistd[854]: 2026-07-05T06:00:45+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 17517 0 0100 401 100 401 0 0 15024 0 0100 401 100 401 0 0 13218 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 17178 0 0100 401 100 401 0 0 14600 0 0100 401 100 401 0 0 12903 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 26288 0 0100 401 100 401 0 0 19538 0 0100 401 100 401 0 0 15888 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 29246 0 0100 401 100 401 0 0 21722 0 0100 401 100 401 0 0 17568 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 32229 0 0100 401 100 401 0 0 23947 0 0100 401 100 401 0 0 18375 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 32304 0 0100 401 100 401 0 0 23934 0 0100 401 100 401 0 0 19302 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 25499 0 0100 401 100 401 0 0 19655 0 0100 401 100 401 0 0 16459 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 2611 0 0100 401 100 401 0 0 2569 0 0100 401 100 401 0 0 2526 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.24 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 51095 0 0100 401 100 401 0 0 37634 0 0100 401 100 401 0 0 23039 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds) buildbot # [ 58.115272] sshd-session[1197]: Accepted publickey for root from ::1 port 36922 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 58.133229] sshd-session[1197]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 58.145144] systemd-logind[410]: New session '9' of user 'root' with class 'user' and type 'tty'. buildbot # [ 58.152797] systemd[1]: Started Session 9 of User root. buildbot # [ 58.190704] sshd-session[1203]: Received disconnect from ::1 port 36922:11: disconnected by user buildbot # [ 58.193465] sshd-session[1203]: Disconnected from user root ::1 port 36922 buildbot # [ 58.195365] sshd-session[1197]: pam_unix(sshd:session): session closed for user root buildbot # [ 58.202606] systemd[1]: session-9.scope: Deactivated successfully. buildbot # [ 58.217350] systemd-logind[410]: Session 9 logged out. Waiting for processes to exit. buildbot # [ 58.218692] systemd-logind[410]: Removed session 9. buildbot # [ 58.409790] sshd-session[1208]: Accepted publickey for root from ::1 port 36932 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 58.429374] sshd-session[1208]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 58.443814] systemd-logind[410]: New session '10' of user 'root' with class 'user' and type 'tty'. buildbot # [ 58.448504] systemd[1]: Started Session 10 of User root. buildbot # [ 58.496446] sshd-session[1211]: Received disconnect from ::1 port 36932:11: disconnected by user buildbot # [ 58.498561] sshd-session[1211]: Disconnected from user root ::1 port 36932 buildbot # [ 58.499778] sshd-session[1208]: pam_unix(sshd:session): session closed for user root buildbot # [ 58.507555] systemd[1]: session-10.scope: Deactivated successfully. buildbot # [ 58.514294] systemd-logind[410]: Session 10 logged out. Waiting for processes to exit. buildbot # [ 58.515720] systemd-logind[410]: Removed session 10. buildbot # [ 58.522007] twistd[854]: 2026-07-05T06:00:55+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 18735 0 0100 401 100 401 0 0 15983 0 0100 401 100 401 0 0 13976 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot # [ 59.973217] twistd[855]: 2026-07-05T06:00:56+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 14.559757 buildbot # [ 59.990358] twistd[855]: 2026-07-05T06:00:56+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) buildbot # [ 60.006350] twistd[854]: 2026-07-05T06:00:56+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 60.062799] twistd[854]: 2026-07-05T06:00:56+0000 [-] releaseLocks(NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(, )] buildbot # [ 60.084210] twistd[854]: 2026-07-05T06:00:56+0000 [-] step 'Evaluate flake' complete: success (None) buildbot # [ 60.128107] twistd[854]: 2026-07-05T06:00:56+0000 [-] added buildset 2 to database buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 60.173601] twistd[854]: 2026-07-05T06:00:56+0000 [-] added buildset 3 to database buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 35973 0 0100 401 100 401 0 0 29500 0 0100 401 100 401 0 0 24868 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds) buildbot # [ 60.309439] twistd[854]: 2026-07-05T06:00:56+0000 [-] starting build using worker buildbot # [ 60.319071] twistd[854]: 2026-07-05T06:00:56+0000 [-] .startBuild buildbot # [ 60.388058] twistd[854]: 2026-07-05T06:00:57+0000 [-] acquireLocks(worker , locks []) buildbot # [ 60.393132] twistd[854]: 2026-07-05T06:00:57+0000 [-] starting build .. pinging the worker buildbot # [ 60.395961] twistd[854]: 2026-07-05T06:00:57+0000 [-] sending ping buildbot # [ 60.398176] twistd[855]: 2026-07-05T06:00:57+0000 [Broker,client] message from master: ping buildbot # [ 60.401624] twistd[854]: 2026-07-05T06:00:57+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 60.420470] twistd[854]: 2026-07-05T06:00:57+0000 [-] : RemoteCommand.run [12] buildbot # [ 60.432139] twistd[854]: 2026-07-05T06:00:57+0000 [-] command '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']' in dir 'build' buildbot # [ 60.435949] twistd[855]: 2026-07-05T06:00:57+0000 [Broker,client] (command 12): startCommand:shell buildbot # [ 60.438820] twistd[855]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): RunProcess._startCommand buildbot # [ 60.443241] twistd[855]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): nix build -L --option keep-going true --max-silent-time 1200 --accept-flake-config --out-link result-aarch64-linux.failing-test '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*' buildbot # [ 60.449724] twistd[855]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-build/build (timeout 10800 secs) buildbot # [ 60.454782] twistd[855]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): watching logfiles {} buildbot # [ 60.458950] twistd[855]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): argv: [b'nix', b'build', b'-L', b'--option', b'keep-going', b'true', b'--max-silent-time', b'1200', b'--accept-flake-config', b'--out-link', b'result-aarch64-linux.failing-test', b'/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*'] buildbot # [ 60.466067] twistd[855]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): using PTY: False buildbot # [ 60.537947] nix-daemon[1129]: accepted connection from pid 1225, user buildbot-worker buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 35014 0 0100 751 100 751 0 0 28970 0 0100 751 100 751 0 0 25253 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 58855 0 0100 751 100 751 0 0 43820 0 0100 751 100 751 0 0 35501 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 39027 0 0100 751 100 751 0 0 30793 0 0100 751 100 751 0 0 26176 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 59471 0 0100 751 100 751 0 0 44514 0 0100 751 100 751 0 0 36161 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot # [ 65.461878] twistd[855]: 2026-07-05T06:01:02+0000 [-] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): command finished with signal None, exit code 1, elapsedTime: 5.036389 buildbot # [ 65.466390] twistd[855]: 2026-07-05T06:01:02+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) buildbot # [ 65.472566] twistd[854]: 2026-07-05T06:01:02+0000 [Broker,0,127.0.0.1] rc=1 buildbot # [ 65.497799] twistd[854]: 2026-07-05T06:01:02+0000 [-] releaseLocks(NixBuildCommand(name='Build flake attr', command=['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', Interpolate('result-%(prop:attr)s'), Interpolate('%(prop:drv_path)s^*')], timeout=10800, haltOnFailure=True, logEnviron=False)): [] buildbot # [ 65.511122] twistd[854]: 2026-07-05T06:01:02+0000 [-] step 'Build flake attr' complete: failure (["'nix build ...' (failure)"]) buildbot # [ 65.514248] twistd[854]: 2026-07-05T06:01:02+0000 [-] : build finished buildbot # [ 65.524093] twistd[854]: 2026-07-05T06:01:02+0000 [-] releaseLocks(): [] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 65.674235] twistd[854]: 2026-07-05T06:01:02+0000 [-] starting build using worker buildbot # [ 65.689325] twistd[854]: 2026-07-05T06:01:02+0000 [-] .startBuild buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1119 100 1119 0 0 57523 0 0100 1119 100 1119 0 0 51037 0 0100 1119 100 1119 0 0 38533 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) buildbot # [ 65.817788] twistd[854]: 2026-07-05T06:01:02+0000 [-] acquireLocks(worker , locks []) buildbot # [ 65.822424] twistd[854]: 2026-07-05T06:01:02+0000 [-] starting build .. pinging the worker buildbot # [ 65.826455] twistd[854]: 2026-07-05T06:01:02+0000 [-] sending ping buildbot # [ 65.828746] twistd[855]: 2026-07-05T06:01:02+0000 [Broker,client] message from master: ping buildbot # [ 65.829970] twistd[854]: 2026-07-05T06:01:02+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 65.852396] twistd[854]: 2026-07-05T06:01:02+0000 [-] : RemoteCommand.run [13] buildbot # [ 65.862018] twistd[854]: 2026-07-05T06:01:02+0000 [-] command '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']' in dir 'build' buildbot # [ 65.865894] twistd[855]: 2026-07-05T06:01:02+0000 [Broker,client] (command 13): startCommand:shell buildbot # [ 65.867380] twistd[855]: 2026-07-05T06:01:02+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): RunProcess._startCommand buildbot # [ 65.871435] twistd[855]: 2026-07-05T06:01:02+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): nix build -L --option keep-going true --max-silent-time 1200 --accept-flake-config --out-link result-aarch64-linux.test '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*' buildbot # [ 65.879376] twistd[855]: 2026-07-05T06:01:02+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-build/build (timeout 10800 secs) buildbot # [ 65.884512] twistd[855]: 2026-07-05T06:01:02+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): watching logfiles {} buildbot # [ 65.888605] twistd[855]: 2026-07-05T06:01:02+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): argv: [b'nix', b'build', b'-L', b'--option', b'keep-going', b'true', b'--max-silent-time', b'1200', b'--accept-flake-config', b'--out-link', b'result-aarch64-linux.test', b'/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*'] buildbot # [ 65.895161] twistd[855]: 2026-07-05T06:01:02+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): using PTY: False buildbot # [ 65.962022] nix-daemon[1129]: accepted connection from pid 1260, user buildbot-worker buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 59583 0 0100 1120 100 1120 0 0 49844 0 0100 1120 100 1120 0 0 43191 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 42015 0 0100 1120 100 1120 0 0 32294 0 0100 1120 100 1120 0 0 29724 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot # [ 68.097515] sshd-session[1276]: Accepted publickey for root from ::1 port 41514 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 68.113878] sshd-session[1276]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 68.127669] systemd-logind[410]: New session '11' of user 'root' with class 'user' and type 'tty'. buildbot # [ 68.132798] systemd[1]: Started Session 11 of User root. buildbot # [ 68.169239] sshd-session[1279]: Received disconnect from ::1 port 41514:11: disconnected by user buildbot # [ 68.171601] sshd-session[1279]: Disconnected from user root ::1 port 41514 buildbot # [ 68.173737] sshd-session[1276]: pam_unix(sshd:session): session closed for user root buildbot # [ 68.189515] systemd[1]: session-11.scope: Deactivated successfully. buildbot # [ 68.190625] systemd-logind[410]: Session 11 logged out. Waiting for processes to exit. buildbot # [ 68.196870] systemd-logind[410]: Removed session 11. buildbot # [ 68.390558] sshd-session[1284]: Accepted publickey for root from ::1 port 41530 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 68.412509] sshd-session[1284]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 68.429326] systemd-logind[410]: New session '12' of user 'root' with class 'user' and type 'tty'. buildbot # [ 68.436995] systemd[1]: Started Session 12 of User root. buildbot # [ 68.485997] sshd-session[1287]: Received disconnect from ::1 port 41530:11: disconnected by user buildbot # [ 68.488626] sshd-session[1287]: Disconnected from user root ::1 port 41530 buildbot # [ 68.490219] sshd-session[1284]: pam_unix(sshd:session): session closed for user root buildbot # [ 68.496689] systemd[1]: session-12.scope: Deactivated successfully. buildbot # [ 68.501084] systemd-logind[410]: Session 12 logged out. Waiting for processes to exit. buildbot # [ 68.505222] systemd-logind[410]: Removed session 12. buildbot # [ 68.511941] twistd[854]: 2026-07-05T06:01:05+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 49306 0 0100 1120 100 1120 0 0 41369 0 0100 1120 100 1120 0 0 36533 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 89765 0 0100 1120 100 1120 0 0 62173 0 0100 1120 100 1120 0 0 50967 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 74005 0 0100 1120 100 1120 0 0 57198 0 0100 1120 100 1120 0 0 48048 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 78951 0 0100 1120 100 1120 0 0 61309 0 0100 1120 100 1120 0 0 50888 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 73236 0 0100 1120 100 1120 0 0 55355 0 0100 1120 100 1120 0 0 45239 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 77406 0 0100 1120 100 1120 0 0 58601 0 0100 1120 100 1120 0 0 48585 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 83870 0 0100 1120 100 1120 0 0 61457 0 0100 1120 100 1120 0 0 49937 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 80500 0 0100 1120 100 1120 0 0 62267 0 0100 1120 100 1120 0 0 51591 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 43964 0 0100 1120 100 1120 0 0 31716 0 0100 1120 100 1120 0 0 24991 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.17 seconds) buildbot # [ 78.122317] sshd-session[1329]: Accepted publickey for root from ::1 port 45808 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 78.135548] sshd-session[1329]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 78.147450] systemd-logind[410]: New session '13' of user 'root' with class 'user' and type 'tty'. buildbot # [ 78.154339] systemd[1]: Started Session 13 of User root. buildbot # [ 78.189870] sshd-session[1332]: Received disconnect from ::1 port 45808:11: disconnected by user buildbot # [ 78.192333] sshd-session[1332]: Disconnected from user root ::1 port 45808 buildbot # [ 78.193918] sshd-session[1329]: pam_unix(sshd:session): session closed for user root buildbot # [ 78.207305] systemd[1]: session-13.scope: Deactivated successfully. buildbot # [ 78.214616] systemd-logind[410]: Session 13 logged out. Waiting for processes to exit. buildbot # [ 78.215795] systemd-logind[410]: Removed session 13. buildbot # [ 78.404377] sshd-session[1337]: Accepted publickey for root from ::1 port 45818 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 78.420237] sshd-session[1337]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 78.432766] systemd-logind[410]: New session '14' of user 'root' with class 'user' and type 'tty'. buildbot # [ 78.445140] systemd[1]: Started Session 14 of User root. buildbot # [ 78.492632] sshd-session[1340]: Received disconnect from ::1 port 45818:11: disconnected by user buildbot # [ 78.495007] sshd-session[1340]: Disconnected from user root ::1 port 45818 buildbot # [ 78.497817] sshd-session[1337]: pam_unix(sshd:session): session closed for user root buildbot # [ 78.503481] systemd[1]: session-14.scope: Deactivated successfully. buildbot # [ 78.507861] systemd-logind[410]: Session 14 logged out. Waiting for processes to exit. buildbot # [ 78.511476] systemd-logind[410]: Removed session 14. buildbot # [ 78.518432] twistd[854]: 2026-07-05T06:01:15+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 44328 0 0100 1120 100 1120 0 0 38662 0 0100 1120 100 1120 0 0 34636 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 84803 0 0100 1120 100 1120 0 0 63373 0 0100 1120 100 1120 0 0 50489 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot # [ 80.552815] twistd[855]: 2026-07-05T06:01:17+0000 [-] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): command finished with signal None, exit code 0, elapsedTime: 14.701470 buildbot # [ 80.560601] twistd[855]: 2026-07-05T06:01:17+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) buildbot # [ 80.563152] twistd[854]: 2026-07-05T06:01:17+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 80.590466] twistd[854]: 2026-07-05T06:01:17+0000 [-] releaseLocks(NixBuildCommand(name='Build flake attr', command=['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', Interpolate('result-%(prop:attr)s'), Interpolate('%(prop:drv_path)s^*')], timeout=10800, haltOnFailure=True, logEnviron=False)): [] buildbot # [ 80.607004] twistd[854]: 2026-07-05T06:01:17+0000 [-] step 'Build flake attr' complete: success (None) buildbot # [ 80.632997] twistd[854]: 2026-07-05T06:01:17+0000 [-] added buildset 4 to database buildbot # [ 80.766306] twistd[854]: 2026-07-05T06:01:17+0000 [-] starting build using worker buildbot # [ 80.773103] twistd[854]: 2026-07-05T06:01:17+0000 [-] .startBuild buildbot # [ 80.825164] twistd[854]: 2026-07-05T06:01:17+0000 [-] acquireLocks(worker , locks []) buildbot # [ 80.830118] twistd[854]: 2026-07-05T06:01:17+0000 [-] starting build .. pinging the worker buildbot # [ 80.834555] twistd[854]: 2026-07-05T06:01:17+0000 [-] sending ping buildbot # [ 80.837682] twistd[855]: 2026-07-05T06:01:17+0000 [Broker,client] message from master: ping buildbot # [ 80.838883] twistd[854]: 2026-07-05T06:01:17+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 80.859557] twistd[854]: 2026-07-05T06:01:17+0000 [-] : RemoteCommand.run [14] buildbot # [ 80.868136] twistd[854]: 2026-07-05T06:01:17+0000 [-] command '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']' in dir 'build' buildbot # [ 80.870930] twistd[855]: 2026-07-05T06:01:17+0000 [Broker,client] (command 14): startCommand:shell buildbot # [ 80.872828] twistd[855]: 2026-07-05T06:01:17+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): RunProcess._startCommand buildbot # [ 80.876115] twistd[855]: 2026-07-05T06:01:17+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): nix-store --add-root /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test -r /nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test buildbot # [ 80.880772] twistd[855]: 2026-07-05T06:01:17+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-register-gcroot/build (timeout 1200 secs) buildbot # [ 80.885171] twistd[855]: 2026-07-05T06:01:17+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): watching logfiles {} buildbot # [ 80.888392] twistd[855]: 2026-07-05T06:01:17+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): argv: [b'nix-store', b'--add-root', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', b'-r', b'/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test'] buildbot # [ 80.893204] twistd[855]: 2026-07-05T06:01:17+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): using PTY: False buildbot # [ 80.962487] nix-daemon[1129]: accepted connection from pid 1362, user buildbot-worker buildbot # [ 80.982919] twistd[855]: 2026-07-05T06:01:17+0000 [-] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): command finished with signal None, exit code 0, elapsedTime: 0.122642 buildbot # [ 80.988708] twistd[855]: 2026-07-05T06:01:17+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) buildbot # [ 80.990934] twistd[854]: 2026-07-05T06:01:17+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 81.015574] twistd[854]: 2026-07-05T06:01:17+0000 [-] releaseLocks(ShellCommand(name='Register gcroot', command=['nix-store', '--add-root', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/%(prop:attr)s'), '-r', Property(out_path)], logEnviron=False)): [] buildbot # [ 81.029530] twistd[854]: 2026-07-05T06:01:17+0000 [-] step 'Register gcroot' complete: success (None) buildbot # [ 81.030803] twistd[854]: 2026-07-05T06:01:17+0000 [-] : build finished buildbot # [ 81.044076] twistd[854]: 2026-07-05T06:01:17+0000 [-] releaseLocks(): [] buildbot # [ 81.177284] twistd[854]: 2026-07-05T06:01:17+0000 [-] releaseLocks(Trigger(name='Register gcroot', waitForFinish=True, schedulerNames=['test-flake-nix-register-gcroot'], haltOnFailure=True, flunkOnFailure=True, sourceStamps=[], alwaysUseLatest=False, updateSourceStamp=False, doStepIf=. at 0xe8aa74815d00>, copy_properties=['out_path', 'attr'], set_properties={'report_status': False})): [] buildbot # [ 81.192918] twistd[854]: 2026-07-05T06:01:17+0000 [-] step 'Register gcroot' complete: success (None) buildbot # [ 81.210443] twistd[854]: 2026-07-05T06:01:17+0000 [-] : RemoteCommand.run [15] buildbot # [ 81.216285] twistd[854]: 2026-07-05T06:01:17+0000 [-] command '['rm', '-f', 'result-aarch64-linux.test']' in dir 'build' buildbot # [ 81.217750] twistd[855]: 2026-07-05T06:01:17+0000 [Broker,client] (command 15): startCommand:shell buildbot # [ 81.218888] twistd[855]: 2026-07-05T06:01:17+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): RunProcess._startCommand buildbot # [ 81.222628] twistd[855]: 2026-07-05T06:01:17+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): rm -f result-aarch64-linux.test buildbot # [ 81.224653] twistd[855]: 2026-07-05T06:01:17+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-build/build (timeout 1200 secs) buildbot # [ 81.227242] twistd[855]: 2026-07-05T06:01:17+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): watching logfiles {} buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 81.229182] twistd[855]: 2026-07-05T06:01:17+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): argv: [b'rm', b'-f', b'result-aarch64-linux.test'] buildbot # [ 81.233189] twistd[855]: 2026-07-05T06:01:17+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): using PTY: False buildbot # [ 81.242312] twistd[855]: 2026-07-05T06:01:17+0000 [-] (command ['rm', '-f', 'result-aarch64-linux.test']): command finished with signal None, exit code 0, elapsedTime: 0.033330 buildbot # [ 81.245742] twistd[855]: 2026-07-05T06:01:17+0000 [-] (command 15): ProtocolCommandBase.command_complete (success) buildbot # [ 81.265599] twistd[854]: 2026-07-05T06:01:17+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 81.296359] twistd[854]: 2026-07-05T06:01:17+0000 [-] releaseLocks(ShellCommand(name='Delete temporary gcroots', command=['rm', '-f', Interpolate('result-%(prop:attr)s')], logEnviron=False)): [] buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # [ 81.312116] twistd[854]: 2026-07-05T06:01:17+0000 [-] step 'Delete temporary gcroots' complete: success (None) buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1479 100 1479 0 0 68713 0 0100 1479 100 1479 0 0 59091 0 0100 1479 100 1479 0 0 54025 0 0 buildbot # [ 81.339960] twistd[854]: 2026-07-05T06:01:17+0000 [-] releaseLocks(UpdateBuildOutput(project=, name='Update build output', path=PosixPath('/var/lib/buildbot-outputs'), branch_config={})): [] buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot # [ 81.351161] twistd[854]: 2026-07-05T06:01:18+0000 [-] step 'Update build output' complete: success (None) buildbot # [ 81.353802] twistd[854]: 2026-07-05T06:01:18+0000 [-] : build finished buildbot # [ 81.377120] twistd[854]: 2026-07-05T06:01:18+0000 [-] releaseLocks(): [] buildbot # [ 81.517457] twistd[854]: 2026-07-05T06:01:18+0000 [-] releaseLocks(BuildTrigger(project=, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): [] buildbot # [ 81.545219] twistd[854]: 2026-07-05T06:01:18+0000 [-] step 'build flake' complete: failure (['(1 success, 1 failure, 1 skipped)']) buildbot # [ 81.560288] twistd[854]: 2026-07-05T06:01:18+0000 [-] : RemoteCommand.run [16] buildbot # [ 81.563881] twistd[854]: 2026-07-05T06:01:18+0000 [-] command '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']' in dir 'build' buildbot # [ 81.575467] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command 16): startCommand:shell buildbot # [ 81.578078] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): RunProcess._startCommand buildbot # [ 81.581376] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): nix-store --add-root /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test -r /nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test buildbot # [ 81.586549] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 81.591076] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): watching logfiles {} buildbot # [ 81.596856] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): argv: [b'nix-store', b'--add-root', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', b'-r', b'/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test'] buildbot # [ 81.602398] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): using PTY: False buildbot # [ 81.669225] nix-daemon[1129]: accepted connection from pid 1378, user buildbot-worker buildbot # [ 81.691232] twistd[855]: 2026-07-05T06:01:18+0000 [-] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): command finished with signal None, exit code 0, elapsedTime: 0.117457 buildbot # [ 81.695670] twistd[855]: 2026-07-05T06:01:18+0000 [-] (command 16): ProtocolCommandBase.command_complete (success) buildbot # [ 81.699335] twistd[854]: 2026-07-05T06:01:18+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 81.724788] twistd[854]: 2026-07-05T06:01:18+0000 [-] releaseLocks(ProcessSkippedBuilds(project=, gcroots_user='buildbot-worker', branch_config={}, outputs_path=PosixPath('/var/lib/buildbot-outputs'), name='Process skipped builds', doStepIf=. at 0xe8aa74814c20>, hideStepIf=. at 0xe8aa74814cc0>)): [] buildbot # [ 81.736867] twistd[854]: 2026-07-05T06:01:18+0000 [-] step 'Process skipped builds' complete: success (None) buildbot # [ 81.752586] twistd[854]: 2026-07-05T06:01:18+0000 [-] : RemoteCommand.run [17] buildbot # [ 81.754846] twistd[854]: 2026-07-05T06:01:18+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build' buildbot # [ 81.762248] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command 17): startCommand:shell buildbot # [ 81.763688] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand buildbot # [ 81.766479] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ buildbot # [ 81.771673] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 81.774810] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {} buildbot # [ 81.777332] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/'] buildbot # [ 81.780909] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False buildbot # [ 81.787869] twistd[855]: 2026-07-05T06:01:18+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.035685 buildbot # [ 81.790746] twistd[855]: 2026-07-05T06:01:18+0000 [-] (command 17): ProtocolCommandBase.command_complete (success) buildbot # [ 81.805601] twistd[854]: 2026-07-05T06:01:18+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 81.827429] twistd[854]: 2026-07-05T06:01:18+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): [] buildbot # [ 81.837078] twistd[854]: 2026-07-05T06:01:18+0000 [-] step 'Cleanup drv paths' complete: success (None) buildbot # [ 81.847082] twistd[854]: 2026-07-05T06:01:18+0000 [-] releaseLocks(BuildbotEffectsCommand(project=, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=. at 0xe8aa74815440>, logEnviron=False)): [] buildbot # [ 81.858043] twistd[854]: 2026-07-05T06:01:18+0000 [-] step 'Evaluate effects' complete: skipped (None) buildbot # [ 81.872338] twistd[854]: 2026-07-05T06:01:18+0000 [-] : RemoteCommand.run [18] buildbot # [ 81.875053] twistd[854]: 2026-07-05T06:01:18+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', '1367bd8d2ed1555fde8493c49a4f847689baba10', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 81.883346] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command 18): startCommand:shell buildbot # [ 81.885087] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '1367bd8d2ed1555fde8493c49a4f847689baba10', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 81.887937] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '1367bd8d2ed1555fde8493c49a4f847689baba10', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev 1367bd8d2ed1555fde8493c49a4f847689baba10 --branch master --repo test-flake buildbot # [ 81.892166] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '1367bd8d2ed1555fde8493c49a4f847689baba10', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 81.895663] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '1367bd8d2ed1555fde8493c49a4f847689baba10', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 81.898887] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '1367bd8d2ed1555fde8493c49a4f847689baba10', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'1367bd8d2ed1555fde8493c49a4f847689baba10', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 81.903481] twistd[855]: 2026-07-05T06:01:18+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '1367bd8d2ed1555fde8493c49a4f847689baba10', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot # [ 82.193324] nix-daemon[1129]: accepted connection from pid 1387, user buildbot-worker buildbot # [ 82.230969] twistd[855]: 2026-07-05T06:01:18+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', '1367bd8d2ed1555fde8493c49a4f847689baba10', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.357169 buildbot # [ 82.237023] twistd[855]: 2026-07-05T06:01:18+0000 [-] (command 18): ProtocolCommandBase.command_complete (success) buildbot # [ 82.240591] twistd[854]: 2026-07-05T06:01:18+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 82.269459] twistd[854]: 2026-07-05T06:01:18+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=. at 0xe8aa74815620>, hideStepIf=. at 0xe8aa748156c0>, logEnviron=False)): [] buildbot # [ 82.284697] twistd[854]: 2026-07-05T06:01:18+0000 [-] step 'Evaluate scheduled effects' complete: success (None) buildbot # [ 82.287356] twistd[854]: 2026-07-05T06:01:18+0000 [-] : build finished buildbot # [ 82.294304] twistd[854]: 2026-07-05T06:01:18+0000 [-] releaseLocks(): [] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1523 100 1523 0 0 126.6k 0 0100 1523 100 1523 0 0 103.6k 0 0100 1523 100 1523 0 0 90316 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 2172 100 2172 0 0 188.9k 0 0100 2172 100 2172 0 0 155.6k 0 0100 2172 100 2172 0 0 132.2k 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1548 100 1548 0 0 134.6k 0 0100 1548 100 1548 0 0 111.0k 0 0100 1548 100 1548 0 0 96816 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 2132 100 2132 0 0 192.4k 0 0100 2132 100 2132 0 0 154.4k 0 0100 2132 100 2132 0 0 131.6k 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.06 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 2489 100 2489 0 0 220.8k 0 0100 2489 100 2489 0 0 180.3k 0 0100 2489 100 2489 0 0 153.3k 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.06 seconds) (finished: subtest: Poller triggers builds and verifies results, in 52.56 seconds) subtest: Verify output paths are written for skipped builds buildbot: must succeed: nix config show system buildbot: (finished: must succeed: nix config show system, in 0.09 seconds) buildbot: must succeed: nix eval --raw /tmp/test-flake#checks.aarch64-linux.skippable-test.outPath buildbot: (finished: must succeed: nix eval --raw /tmp/test-flake#checks.aarch64-linux.skippable-test.outPath , in 0.12 seconds) Expected output path for skippable-test: /nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test buildbot: waiting for success: test -f /var/lib/buildbot-outputs/unknown/test-flake/master/aarch64-linux.skippable-test buildbot: (finished: waiting for success: test -f /var/lib/buildbot-outputs/unknown/test-flake/master/aarch64-linux.skippable-test, in 0.02 seconds) buildbot: must succeed: cat /var/lib/buildbot-outputs/unknown/test-flake/master/aarch64-linux.skippable-test buildbot: (finished: must succeed: cat /var/lib/buildbot-outputs/unknown/test-flake/master/aarch64-linux.skippable-test, in 0.03 seconds) (finished: subtest: Verify output paths are written for skipped builds, in 0.25 seconds) (finished: run the VM test script, in 83.72 seconds) test script finished in 83.76s cleanup kill QemuMachine (pid 12) buildbot # qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13) (finished: cleanup, in 0.28 seconds)