Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.00 seconds) Test will time out and terminate in 3600 seconds run the VM test script additionally exposed symbols: buildbot, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh buildbot: waiting for unit sshd.service buildbot: waiting for the VM to finish booting buildbot: starting vm buildbot # Disk image does not exist, creating the virtualisation disk image... buildbot: QEMU running (pid 12) buildbot # Formatting '/build/vm-state-buildbot/tmp.mdlqVcJxqy', fmt=raw size=1073741824 buildbot # mke2fs 1.47.4 (6-Mar-2025) buildbot # Discarding device blocks: 0/262144 done buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes buildbot # Filesystem UUID: ee12fed6-5d15-49d7-a227-5b2c0389877c buildbot # Superblock backups stored on blocks: buildbot # 32768, 98304, 163840, 229376 buildbot # buildbot # Allocating group tables: 0/8 done buildbot # Writing inode tables: 0/8 done buildbot # Creating journal (8192 blocks): done buildbot # Writing superblocks and filesystem accounting information: 0/8 done buildbot # buildbot # Virtualisation disk image created. buildbot # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0xc00fac40] buildbot # [ 0.000000] Linux version 6.18.38 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT Sat Jul 4 11:44:22 UTC 2026 buildbot # [ 0.000000] KASLR enabled buildbot # [ 0.000000] random: crng init done buildbot # [ 0.000000] Machine model: linux,dummy-virt buildbot # [ 0.000000] efi: UEFI not found. buildbot # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT buildbot # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] NODE_DATA(0) allocated [mem 0x7fded740-0x7fdf0ebf] buildbot # [ 0.000000] Zone ranges: buildbot # [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] DMA32 empty buildbot # [ 0.000000] Normal empty buildbot # [ 0.000000] Device empty buildbot # [ 0.000000] Movable zone start for each node buildbot # [ 0.000000] Early memory node ranges buildbot # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc00000 buildbot # [ 0.000000] psci: probing for conduit method from DT. buildbot # [ 0.000000] psci: PSCIv1.3 detected in firmware. buildbot # [ 0.000000] psci: Using standard PSCI v0.2 function IDs buildbot # [ 0.000000] psci: Trusted OS migration not required buildbot # [ 0.000000] psci: SMC Calling Convention v1.1 buildbot # [ 0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003) buildbot # [ 0.000000] percpu: Embedded 76 pages/cpu s186392 r8192 d116712 u311296 buildbot # [ 0.000000] Detected PIPT I-cache on CPU0 buildbot # [ 0.000000] CPU features: detected: Address authentication (architected QARMA5 algorithm) buildbot # [ 0.000000] CPU features: detected: GICv3 CPU interface buildbot # [ 0.000000] CPU features: detected: Spectre-v4 buildbot # [ 0.000000] CPU features: detected: Spectre-BHB buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC03_CPU_38 buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC04_CPU_23 buildbot # [ 0.000000] alternatives: applying boot alternatives buildbot # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/2dslxyvm245bj6bnzymgx89r70pv4hv9-nixos-system-buildbot-test/init regInfo=/nix/store/lms4acrnlpnxlmxibixsanyjkicsklwz-closure-info/registration console=ttyAMA0,115200n8 console=tty0 buildbot # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/lms4acrnlpnxlmxibixsanyjkicsklwz-closure-info/registration", will be passed to user space. buildbot # [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes buildbot # [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) buildbot # [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) buildbot # [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB buildbot # [ 0.000000] software IO TLB: area num 1. buildbot # [ 0.000000] software IO TLB: mapped [mem 0x000000007ca80000-0x000000007cb80000] (1MB) buildbot # [ 0.000000] Fallback order for Node 0: 0 buildbot # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 buildbot # [ 0.000000] Policy zone: DMA buildbot # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off buildbot # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 buildbot # [ 0.000000] allocated 2097152 bytes of page_ext buildbot # [ 0.000000] ftrace: allocating 74713 entries in 292 pages buildbot # [ 0.000000] ftrace: allocated 292 pages with 3 groups buildbot # [ 0.000000] rcu: Hierarchical RCU implementation. buildbot # [ 0.000000] rcu: RCU event tracing is enabled. buildbot # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. buildbot # [ 0.000000] Trampoline variant of Tasks RCU enabled. buildbot # [ 0.000000] Rude variant of Tasks RCU enabled. buildbot # [ 0.000000] Tracing variant of Tasks RCU enabled. buildbot # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. buildbot # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 buildbot # [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 buildbot # [ 0.000000] GICv3: 256 SPIs implemented buildbot # [ 0.000000] GICv3: 0 Extended SPIs implemented buildbot # [ 0.000000] Root IRQ handler: gic_handle_irq buildbot # [ 0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI buildbot # [ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=0 buildbot # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 buildbot # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @44ce0000 (indirect, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @44cf0000 (flat, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] GICv3: using LPI property table @0x0000000044d00000 buildbot # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000044d10000 buildbot # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. buildbot # [ 0.000000] arch_timer: cp15 timer running at 1000.00MHz (virt). buildbot # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns buildbot # [ 0.000000] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns buildbot # [ 0.000026] arm-pv: using stolen time PV buildbot # [ 0.000382] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) buildbot # [ 0.000544] Console: colour dummy device 80x25 buildbot # [ 0.000551] printk: legacy console [tty0] enabled buildbot # [ 0.000721] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) buildbot # [ 0.000727] pid_max: default: 32768 minimum: 301 buildbot # [ 0.000811] LSM: initializing lsm=capability,landlock,yama,bpf,ima buildbot # [ 0.000980] landlock: Up and running. buildbot # [ 0.000983] Yama: becoming mindful. buildbot # [ 0.001411] LSM support for eBPF active buildbot # [ 0.001528] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.001547] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.002606] cacheinfo: Unable to detect cache hierarchy for CPU 0 buildbot # [ 0.003290] rcu: Hierarchical SRCU implementation. buildbot # [ 0.003294] rcu: Max phase no-delay instances is 1000. buildbot # [ 0.004477] fsl-mc MSI: its@8080000 domain created buildbot # [ 0.004567] EFI services will not be available. buildbot # [ 0.004646] smp: Bringing up secondary CPUs ... buildbot # [ 0.004654] smp: Brought up 1 node, 1 CPU buildbot # [ 0.004657] SMP: Total of 1 processors activated. buildbot # [ 0.004660] CPU: All CPU(s) started at EL1 buildbot # [ 0.004670] CPU features: detected: Branch Target Identification buildbot # [ 0.004674] CPU features: detected: ARMv8.4 Translation Table Level buildbot # [ 0.004680] CPU features: detected: Instruction cache invalidation not required for I/D coherence buildbot # [ 0.004683] CPU features: detected: Data cache clean to the PoU not required for I/D coherence buildbot # [ 0.004687] CPU features: detected: Common not Private translations buildbot # [ 0.004690] CPU features: detected: CRC32 instructions buildbot # [ 0.004693] CPU features: detected: Data cache clean to Point of Deep Persistence buildbot # [ 0.004696] CPU features: detected: Data cache clean to Point of Persistence buildbot # [ 0.004700] CPU features: detected: Data independent timing control (DIT) buildbot # [ 0.004703] CPU features: detected: E0PD buildbot # [ 0.004705] CPU features: detected: Enhanced Counter Virtualization buildbot # [ 0.004708] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) buildbot # [ 0.004712] CPU features: detected: Enhanced Virtualization Traps buildbot # [ 0.004715] CPU features: detected: Fine Grained Traps buildbot # [ 0.004719] CPU features: detected: Generic authentication (architected QARMA5 algorithm) buildbot # [ 0.004724] CPU features: detected: RCpc load-acquire (LDAPR) buildbot # [ 0.004726] CPU features: detected: LSE atomic instructions buildbot # [ 0.004729] CPU features: detected: Privileged Access Never buildbot # [ 0.004732] CPU features: detected: PMUv3 buildbot # [ 0.004734] CPU features: detected: RAS Extension Support buildbot # [ 0.004737] CPU features: detected: RASv1p1 Extension Support buildbot # [ 0.004739] CPU features: detected: Random Number Generator buildbot # [ 0.004742] CPU features: detected: Speculation barrier (SB) buildbot # [ 0.004745] CPU features: detected: Stage-2 Force Write-Back buildbot # [ 0.004747] CPU features: detected: TLB range maintenance instructions buildbot # [ 0.004752] CPU features: detected: Speculative Store Bypassing Safe (SSBS) buildbot # [ 0.004789] alternatives: applying system-wide alternatives buildbot # [ 0.007615] CPU features: detected: BBM Level 2 without TLB conflict abort buildbot # [ 0.007748] Memory: 895064K/1048576K available (24384K kernel code, 7086K rwdata, 26324K rodata, 4736K init, 1102K bss, 112244K reserved, 32768K cma-reserved) buildbot # [ 0.008084] devtmpfs: initialized buildbot # [ 0.009780] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns buildbot # [ 0.009803] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.009823] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). buildbot # [ 0.009998] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL buildbot # [ 0.010003] 0 pages in range for non-PLT usage buildbot # [ 0.010004] 508320 pages in range for PLT usage buildbot # [ 0.010115] pinctrl core: initialized pinctrl subsystem buildbot # [ 0.010905] DMI not present or invalid. buildbot # [ 0.013866] NET: Registered PF_NETLINK/PF_ROUTE protocol family buildbot # [ 0.016052] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations buildbot # [ 0.016234] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations buildbot # [ 0.016391] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations buildbot # [ 0.016409] audit: initializing netlink subsys (disabled) buildbot # [ 0.016970] thermal_sys: Registered thermal governor 'fair_share' buildbot # [ 0.016972] thermal_sys: Registered thermal governor 'bang_bang' buildbot # [ 0.016975] thermal_sys: Registered thermal governor 'step_wise' buildbot # [ 0.016978] thermal_sys: Registered thermal governor 'user_space' buildbot # [ 0.016980] thermal_sys: Registered thermal governor 'power_allocator' buildbot # [ 0.017006] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1 buildbot # [ 0.017016] cpuidle: using governor ladder buildbot # [ 0.017022] cpuidle: using governor menu buildbot # [ 0.017211] hw-breakpoint: found 16 breakpoint and 4 watchpoint registers. buildbot # [ 0.017225] ASID allocator initialised with 65536 entries buildbot # [ 0.018626] Serial: AMBA PL011 UART driver buildbot # [ 0.023683] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 buildbot # [ 0.023841] printk: console [ttyAMA0] enabled buildbot # [ 0.152242] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages buildbot # [ 0.152262] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page buildbot # [ 0.152268] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages buildbot # [ 0.152272] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page buildbot # [ 0.152277] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages buildbot # [ 0.152281] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page buildbot # [ 0.152285] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages buildbot # [ 0.152290] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page buildbot # [ 0.160084] fbcon: Taking over console buildbot # [ 0.160100] ACPI: Interpreter disabled. buildbot # [ 0.162023] iommu: Default domain type: Translated buildbot # [ 0.162032] iommu: DMA domain TLB invalidation policy: strict mode buildbot # [ 0.163786] SCSI subsystem initialized buildbot # [ 0.164531] usbcore: registered new interface driver usbfs buildbot # [ 0.164567] usbcore: registered new interface driver hub buildbot # [ 0.164585] usbcore: registered new device driver usb buildbot # [ 0.172911] pps_core: LinuxPPS API ver. 1 registered buildbot # [ 0.172921] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti buildbot # [ 0.172932] PTP clock support registered buildbot # [ 0.172984] EDAC MC: Ver: 3.0.0 buildbot # [ 0.175815] scmi_core: SCMI protocol bus registered buildbot # [ 0.176825] FPGA manager framework buildbot # [ 0.177745] vgaarb: loaded buildbot # [ 0.178380] clocksource: Switched to clocksource arch_sys_counter buildbot # [ 0.178839] VFS: Disk quotas dquot_6.6.0 buildbot # [ 0.178872] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) buildbot # [ 0.181435] netfs: FS-Cache loaded buildbot # [ 0.181541] pnp: PnP ACPI: disabled buildbot # [ 0.187876] NET: Registered PF_INET protocol family buildbot # [ 0.188033] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) buildbot # [ 0.216295] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.216332] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) buildbot # [ 0.216354] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) buildbot # [ 0.216406] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) buildbot # [ 0.216481] TCP: Hash tables configured (established 8192 bind 8192) buildbot # [ 0.216557] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) buildbot # [ 0.216612] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.216666] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.216739] NET: Registered PF_UNIX/PF_LOCAL protocol family buildbot # [ 0.216781] NET: Registered PF_XDP protocol family buildbot # [ 0.216800] PCI: CLS 0 bytes, default 64 buildbot # [ 0.217022] Trying to unpack rootfs image as initramfs... buildbot # [ 0.232278] kvm [1]: HYP mode not available buildbot # [ 0.322904] Initialise system trusted keyrings buildbot # [ 0.323652] workingset: timestamp_bits=42 max_order=18 bucket_order=0 buildbot # [ 0.324975] squashfs: version 4.0 (2009/01/31) Phillip Lougher buildbot # [ 0.325765] 9p: Installing v9fs 9p2000 file system support buildbot # [ 0.346376] Key type asymmetric registered buildbot # [ 0.354457] Asymmetric key parser 'x509' registered buildbot # [ 0.354533] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) buildbot # [ 0.356718] io scheduler mq-deadline registered buildbot # [ 0.356730] io scheduler kyber registered buildbot # [ 0.366551] pl061_gpio 9030000.pl061: PL061 GPIO chip registered buildbot # [ 0.367991] ledtrig-cpu: registered to indicate activity on CPUs buildbot # [ 0.368424] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: buildbot # [ 0.368442] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 buildbot # [ 0.368464] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 buildbot # [ 0.368473] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 buildbot # [ 0.368494] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits buildbot # [ 0.368523] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] buildbot # [ 0.368600] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 buildbot # [ 0.368610] pci_bus 0000:00: root bus resource [bus 00-ff] buildbot # [ 0.368617] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] buildbot # [ 0.368622] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] buildbot # [ 0.368628] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] buildbot # [ 0.368723] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint buildbot # [ 0.369165] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.369355] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.369372] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.369401] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.369417] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.369873] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.370058] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.370074] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.370104] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.390286] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.391509] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.391528] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.391558] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.392005] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.392197] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.392214] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.392243] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.392695] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.392881] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.392897] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.392927] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.393373] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint buildbot # [ 0.393557] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] buildbot # [ 0.393573] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.393603] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.394048] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.394233] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.394248] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.394278] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.394294] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.414863] pci 0000:00:08.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint buildbot # [ 0.415066] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.415097] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.415553] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint buildbot # [ 0.415742] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.415771] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.416156] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint buildbot # [ 0.416349] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] buildbot # [ 0.416597] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint buildbot # [ 0.416869] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.416886] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.416917] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.417376] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.417566] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.417582] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.417612] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.418193] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned buildbot # [ 0.418204] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned buildbot # [ 0.418210] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned buildbot # [ 0.418255] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned buildbot # [ 0.418302] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned buildbot # [ 0.418349] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned buildbot # [ 0.442452] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned buildbot # [ 0.442514] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned buildbot # [ 0.442563] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned buildbot # [ 0.442612] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned buildbot # [ 0.442659] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned buildbot # [ 0.442707] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned buildbot # [ 0.442847] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned buildbot # [ 0.442894] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned buildbot # [ 0.442916] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned buildbot # [ 0.442939] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned buildbot # [ 0.442962] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned buildbot # [ 0.442984] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned buildbot # [ 0.443006] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned buildbot # [ 0.443032] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned buildbot # [ 0.443055] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned buildbot # [ 0.443077] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned buildbot # [ 0.443100] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned buildbot # [ 0.443124] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned buildbot # [ 0.443147] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned buildbot # [ 0.443169] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned buildbot # [ 0.443190] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned buildbot # [ 0.443212] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned buildbot # [ 0.443233] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned buildbot # [ 0.443255] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned buildbot # [ 0.443277] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned buildbot # [ 0.443299] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned buildbot # [ 0.443321] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned buildbot # [ 0.443343] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned buildbot # [ 0.443374] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] buildbot # [ 0.443384] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] buildbot # [ 0.443389] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] buildbot # [ 0.444568] pci 0000:00:0a.0: enabling device (0000 -> 0002) buildbot # [ 0.496356] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) buildbot # [ 0.498373] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) buildbot # [ 0.509913] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) buildbot # [ 0.512671] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) buildbot # [ 0.518531] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) buildbot # [ 0.521391] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) buildbot # [ 0.531577] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) buildbot # [ 0.534332] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) buildbot # [ 0.543938] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) buildbot # [ 0.546254] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) buildbot # [ 0.563839] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) buildbot # [ 0.569500] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled buildbot # [ 0.571976] msm_serial: driver initialized buildbot # [ 0.572151] SuperH (H)SCI(F) driver initialized buildbot # [ 0.572217] STM32 USART driver initialized buildbot # [ 0.606949] loop: module loaded buildbot # [ 0.607111] virtio_blk virtio5: 1/0/0 default/read/poll queues buildbot # [ 0.607935] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) buildbot # [ 0.614938] megasas: 07.734.00.00-rc1 buildbot # [ 0.615644] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] buildbot # [ 0.617538] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.617563] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.619107] Using buffer write method buildbot # [ 0.619175] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] buildbot # [ 0.620884] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.620906] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.638401] Using buffer write method buildbot # [ 0.638423] Concatenating MTD devices: buildbot # [ 0.638427] (0): "0.flash" buildbot # [ 0.638431] (1): "0.flash" buildbot # [ 0.638435] into device "0.flash" buildbot # [ 0.840459] Freeing initrd memory: 25516K buildbot # [ 0.846673] tun: Universal TUN/TAP device driver, 1.6 buildbot # [ 0.850292] thunder_xcv, ver 1.0 buildbot # [ 0.850332] thunder_bgx, ver 1.0 buildbot # [ 0.850355] nicpf, ver 1.0 buildbot # [ 0.852144] e1000: Intel(R) PRO/1000 Network Driver buildbot # [ 0.852155] e1000: Copyright (c) 1999-2006 Intel Corporation. buildbot # [ 0.852193] e1000e: Intel(R) PRO/1000 Network Driver buildbot # [ 0.852200] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. buildbot # [ 0.852232] igb: Intel(R) Gigabit Ethernet Network Driver buildbot # [ 0.852237] igb: Copyright (c) 2007-2014 Intel Corporation. buildbot # [ 0.852260] igbvf: Intel(R) Gigabit Virtual Function Network Driver buildbot # [ 0.852266] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. buildbot # [ 0.852395] sky2: driver version 1.30 buildbot # [ 0.853972] usbcore: registered new interface driver usb-storage buildbot # [ 0.854051] usbcore: registered new interface driver usbserial_generic buildbot # [ 0.854066] usbserial: USB Serial support registered for generic buildbot # [ 0.855064] ehci-pci 0000:00:0a.0: EHCI Host Controller buildbot # [ 0.855090] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 buildbot # [ 0.855365] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 buildbot # [ 0.866604] hv_vmbus: registering driver hyperv_keyboard buildbot # [ 0.867937] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 buildbot # [ 0.868968] hub 1-0:1.0: USB hub found buildbot # [ 0.869479] hub 1-0:1.0: 6 ports detected buildbot # [ 0.870573] rtc-pl031 9010000.pl031: registered as rtc0 buildbot # [ 0.870597] rtc-pl031 9010000.pl031: setting system clock to 2026-07-05T06:00:01 UTC (1783231201) buildbot # [ 0.870903] i2c_dev: i2c /dev entries driver buildbot # [ 0.875868] sdhci: Secure Digital Host Controller Interface driver buildbot # [ 0.875877] sdhci: Copyright(c) Pierre Ossman buildbot # [ 0.876142] Synopsys Designware Multimedia Card Interface Driver buildbot # [ 0.876513] sdhci-pltfm: SDHCI platform and OF driver helper buildbot # [ 0.878122] hid: raw HID events driver (C) Jiri Kosina buildbot # [ 0.878369] usbcore: registered new interface driver usbhid buildbot # [ 0.878376] usbhid: USB HID core driver buildbot # [ 0.884134] hw perfevents: enabled with armv8_pmuv3 PMU driver, 11 (0,800003ff) counters available buildbot # [ 0.885610] drop_monitor: Initializing network drop monitor service buildbot # [ 0.885742] NET: Registered PF_INET6 protocol family buildbot # [ 0.888827] Segment Routing with IPv6 buildbot # [ 0.888865] In-situ OAM (IOAM) with IPv6 buildbot # [ 0.888911] NET: Registered PF_PACKET protocol family buildbot # [ 0.890769] 9pnet: Installing 9P2000 support buildbot # [ 0.892871] Key type dns_resolver registered buildbot # [ 0.899895] registered taskstats version 1 buildbot # [ 0.900049] Loading compiled-in X.509 certificates buildbot # [ 0.908288] Demotion targets for Node 0: null buildbot # [ 0.908386] Key type .fscrypt registered buildbot # [ 0.908393] Key type fscrypt-provisioning registered buildbot # [ 0.908490] ima: No TPM chip found, activating TPM-bypass! buildbot # [ 0.908509] ima: Allocated hash algorithm: sha1 buildbot # [ 0.908530] ima: No architecture policies found buildbot # [ 0.912617] input: gpio-keys as /devices/platform/gpio-keys/input/input0 buildbot # [ 0.929995] clk: Disabling unused clocks buildbot # [ 0.930016] PM: genpd: Disabling unused power domains buildbot # [ 0.934356] Freeing unused kernel memory: 4736K buildbot # [ 0.935165] Run /init as init process buildbot # [ 0.952574] systemd[1]: Successfully made /usr/ read-only. buildbot # [ 1.114459] usb 1-1: new high-speed USB device number 2 using ehci-pci buildbot # [ 1.266646] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 buildbot # [ 1.287482] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 1.299905] systemd[1]: Detected virtualization qemu. buildbot # [ 1.302039] systemd[1]: Detected architecture arm64. buildbot # [ 1.304089] systemd[1]: Running in initrd. buildbot # [ 1.306918] systemd[1]: Initializing machine ID from random generator. buildbot # [ 1.309833] systemd[1]: Hostname set to . buildbot # [ 1.354520] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 buildbot # [ 1.423573] systemd[1]: Queued start job for default target Initrd Default Target. buildbot # [ 1.432452] systemd[1]: Created slice Slice /system/modprobe. buildbot # [ 1.433664] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 1.435057] systemd[1]: Expecting device /dev/disk/by-label/nixos... buildbot # [ 1.436214] systemd[1]: Reached target Path Units. buildbot # [ 1.437038] systemd[1]: Reached target Slice Units. buildbot # [ 1.437872] systemd[1]: Reached target Swaps. buildbot # [ 1.438655] systemd[1]: Reached target Timer Units. buildbot # [ 1.439628] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 1.440880] systemd[1]: Listening on Journal Socket (/dev/log). buildbot # [ 1.442040] systemd[1]: Listening on Journal Sockets. buildbot # [ 1.443091] systemd[1]: Listening on udev Control Socket. buildbot # [ 1.443206] systemd[1]: Listening on udev Kernel Socket. buildbot # [ 1.443229] systemd[1]: Reached target Socket Units. buildbot # [ 1.447286] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 1.457393] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 1.458618] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 1.461851] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 1.471524] systemd[1]: Starting Journal Service... buildbot # [ 1.474470] usb 1-2: new high-speed USB device number 3 using ehci-pci buildbot # [ 1.496466] systemd[1]: Starting Load Kernel Modules... buildbot # [ 1.498157] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 1.502770] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 1.519223] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 1.521239] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 1.525526] systemd-journald[73]: Collecting audit messages is disabled. buildbot # [ 1.530625] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 1.530961] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 1.534734] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 1.561043] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. buildbot # [ 1.582524] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev buildbot # [ 1.584979] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 1.587281] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 1.598335] [drm] pci: virtio-gpu-pci detected at 0000:00:08.0 buildbot # [ 1.606632] [drm] features: -virgl +edid -resource_blob -host_visible buildbot # [ 1.606648] [drm] features: -context_init buildbot # [ 1.607378] [drm] number of scanouts: 1 buildbot # [ 1.607397] [drm] number of cap sets: 0 buildbot # [ 1.619034] virtio-pci 0000:00:08.0: [drm] Registered 1 planes with drm panic buildbot # [ 1.619051] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:08.0 on minor 0 buildbot # [ 1.638504] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 1.639717] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 1.640656] systemd[1]: Reached target Local File Systems. buildbot # [ 1.641839] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 buildbot # [ 1.641963] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 buildbot # [ 1.654911] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 1.659758] Console: switching to colour frame buffer device 160x50 buildbot # [ 1.686932] virtio-pci 0000:00:08.0: [drm] fb0: virtio_gpudrmfb frame buffer device buildbot # [ 1.691669] systemd[1]: Finished Load Kernel Modules. buildbot # [ 1.694497] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 1.740584] systemd[1]: Started Journal Service. buildbot # [ 1.724444] systemd-modules-load[74]: Inserted module 'dm_mod' buildbot # [ 1.725658] systemd-modules-load[74]: Module 'virtio_balloon' is built in buildbot # [ 1.726847] systemd-modules-load[74]: Module 'virtio_console' is built in buildbot # [ 1.727908] systemd-modules-load[74]: Inserted module 'virtio_gpu' buildbot # [ 1.744397] systemd-modules-load[74]: Module 'virtio_rng' is built in buildbot # [ 1.745457] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 1.746589] systemd-udevd[80]: Using default interface naming scheme 'v260'. buildbot # [ 1.755799] systemd[1]: Starting Create System Files and Directories... buildbot # [ 1.785491] systemd[1]: Finished Create System Files and Directories. buildbot # [ 1.796195] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 1.872131] systemd[1]: Starting Virtual Console Setup... buildbot # [ 1.940461] systemd-vconsole-setup[103]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 1.945543] systemd[1]: Finished Virtual Console Setup. buildbot # [ 2.627128] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 2.628104] systemd[1]: Reached target System Initialization. buildbot # [ 2.628930] systemd[1]: Reached target Basic System. buildbot # [ 2.807506] (udev-worker)[96]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.831381] (udev-worker)[94]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 2.836255] (udev-worker)[94]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.874436] systemd[1]: Found device /dev/disk/by-label/nixos. buildbot # [ 2.876827] systemd[1]: Reached target Initrd Root Device. buildbot # [ 2.880522] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... buildbot # [ 2.922345] systemd-fsck[112]: nixos: clean, 12/65536 files, 13019/262144 blocks buildbot # [ 2.928113] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. buildbot # [ 2.931382] systemd[1]: Mounting /sysroot... buildbot # [ 2.998778] EXT4-fs (vda): mounted filesystem ee12fed6-5d15-49d7-a227-5b2c0389877c r/w with ordered data mode. Quota mode: none. buildbot # [ 2.984487] systemd[1]: Mounted /sysroot. buildbot # [ 2.986137] systemd[1]: Reached target Initrd Root File System. buildbot # [ 2.990541] systemd[1]: Mounting /sysroot/nix/.ro-store... buildbot # [ 2.997665] systemd[1]: Mounting /sysroot/nix/.rw-store... buildbot # [ 3.018853] systemd[1]: Mounting /sysroot/run... buildbot # [ 3.031999] systemd[1]: Mounting /sysroot/tmp/shared... buildbot # [ 3.044203] systemd[1]: Mounting /sysroot/tmp/xchg... buildbot # [ 3.064819] systemd[1]: Starting Mountpoints Configured in the Real Root... buildbot # [ 3.076089] systemd[1]: Mounted /sysroot/run. buildbot # [ 3.101274] systemd[1]: Mounted /sysroot/nix/.ro-store. buildbot # [ 3.104516] systemd[1]: Mounted /sysroot/nix/.rw-store. buildbot # [ 3.119281] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.120375] systemd[1]: Mounted /sysroot/tmp/shared. buildbot # [ 3.121104] systemd[1]: Mounted /sysroot/tmp/xchg. buildbot # [ 3.129395] systemd-sysroot-fstab-check[125]: /sysroot should be mounted in the initrd, will request daemon-reload. buildbot # [ 3.141287] systemd[1]: Reload requested from client PID 125 ('systemd-sysroot') (unit initrd-parse-etc.service)... buildbot # [ 3.147538] systemd[1]: Reloading... buildbot # [ 3.368757] systemd[1]: Reloading finished in 225 ms. buildbot # [ 3.387859] systemd-sysroot-fstab-check[125]: Requesting initrd-fs.target/start/replace... buildbot # [ 3.391659] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.396232] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 3.397848] systemd-sysroot-fstab-check[125]: Requesting swap.target/start/replace... buildbot # [ 3.416201] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.417135] systemd[1]: initrd-parse-etc.service: Deactivated successfully. buildbot # [ 3.419453] systemd[1]: Finished Mountpoints Configured in the Real Root. buildbot # [ 3.421015] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. buildbot # [ 3.436219] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.438497] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 3.492850] systemd[1]: Mounting /sysroot/nix/store... buildbot # [ 3.527479] systemd[1]: Mounted /sysroot/nix/store. buildbot # [ 3.529391] systemd[1]: Reached target Initrd File Systems. buildbot # [ 3.531868] systemd[1]: Starting Find NixOS closure... buildbot # [ 3.544130] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... buildbot # [ 3.576261] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. buildbot # [ 3.580262] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. buildbot # [ 3.594340] systemd[1]: Finished Find NixOS closure. buildbot # [ 3.596358] systemd[1]: Reached target Initrd Default Target. buildbot # [ 3.600564] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... buildbot # [ 3.629929] systemd[1]: Stopped target Initrd Default Target. buildbot # [ 3.633356] systemd[1]: Stopped target Basic System. buildbot # [ 3.636390] systemd[1]: Stopped target Initrd Root Device. buildbot # [ 3.637974] systemd[1]: Stopped target Path Units. buildbot # [ 3.639851] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. buildbot # [ 3.643297] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. buildbot # [ 3.646699] systemd[1]: Stopped target Slice Units. buildbot # [ 3.651937] systemd[1]: Stopped target Socket Units. buildbot # [ 3.654075] systemd[1]: Stopped target System Initialization. buildbot # [ 3.654917] systemd[1]: Stopped target Swaps. buildbot # [ 3.655562] systemd[1]: Stopped target Timer Units. buildbot # [ 3.661406] systemd[1]: dbus.socket: Deactivated successfully. buildbot # [ 3.662300] systemd[1]: Closed D-Bus System Message Bus Socket. buildbot # [ 3.663144] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. buildbot # [ 3.669700] systemd[1]: Stopped Find NixOS closure. buildbot # [ 3.670481] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 3.674348] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.677500] systemd[1]: systemd-sysctl.service: Deactivated successfully. buildbot # [ 3.681464] systemd[1]: Stopped Apply Kernel Variables. buildbot # [ 3.692455] systemd[1]: systemd-modules-load.service: Deactivated successfully. buildbot # [ 3.694209] systemd[1]: Stopped Load Kernel Modules. buildbot # [ 3.697896] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. buildbot # [ 3.701168] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. buildbot # [ 3.705508] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. buildbot # [ 3.709011] systemd[1]: Stopped Create System Files and Directories. buildbot # [ 3.712320] systemd[1]: Stopped target Local File Systems. buildbot # [ 3.716249] systemd[1]: Stopped target Preparation for Local File Systems. buildbot # [ 3.717255] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. buildbot # [ 3.718262] systemd[1]: Stopped Coldplug All udev Devices. buildbot # [ 3.720148] systemd[1]: Stopping Rule-based Manager for Device Events and Files... buildbot # [ 3.724145] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 3.725411] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 3.726179] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 3.728122] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 3.730595] systemd[1]: initrd-cleanup.service: Deactivated successfully. buildbot # [ 3.731605] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. buildbot # [ 3.732833] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.733880] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 3.739988] systemd[1]: systemd-udevd.service: Deactivated successfully. buildbot # [ 3.741049] systemd[1]: Stopped Rule-based Manager for Device Events and Files. buildbot # [ 3.744148] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. buildbot # [ 3.747438] systemd[1]: Closed udev Control Socket. buildbot # [ 3.748575] systemd[1]: Starting Cleanup udev Database... buildbot # [ 3.749364] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. buildbot # [ 3.750969] systemd[1]: Stopped Create Static Device Nodes in /dev. buildbot # [ 3.751968] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. buildbot # [ 3.753291] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. buildbot # [ 3.754293] systemd[1]: kmod-static-nodes.service: Deactivated successfully. buildbot # [ 3.755265] systemd[1]: Stopped Create List of Static Device Nodes. buildbot # [ 3.777971] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. buildbot # [ 3.779324] systemd[1]: Finished Cleanup udev Database. buildbot # [ 3.783917] systemd[1]: Reached target Switch Root. buildbot # [ 3.785205] systemd[1]: Starting NixOS Activation... buildbot # [ 3.941411] initrd-nixos-activation-start[173]: booting system configuration /nix/store/2dslxyvm245bj6bnzymgx89r70pv4hv9-nixos-system-buildbot-test buildbot # [ 4.002936] initrd-nixos-activation-start[173]: running activation script... buildbot # [ 4.403709] initrd-nixos-activation-start[196]: setting up /etc... buildbot # [ 4.665034] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. buildbot # [ 4.667727] systemd[1]: Finished NixOS Activation. buildbot # [ 4.672285] systemd[1]: Starting Switch Root... buildbot # [ 4.690312] systemd[1]: Switching root. buildbot # [ 4.760064] systemd-journald[73]: Received SIGTERM from PID 1 (systemd). buildbot # [ 5.313601] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 5.326206] systemd[1]: Detected virtualization qemu. buildbot # [ 5.329334] systemd[1]: Detected architecture arm64. buildbot # [ 5.333404] systemd[1]: Detected first boot. buildbot # [ 5.340667] systemd[1]: Initializing machine ID from random generator. buildbot # [ 5.659901] systemd[1]: bpf-restrict-fs: LSM BPF program attached buildbot # [ 5.853629] NET: Registered PF_VSOCK protocol family buildbot # [ 5.860067] Guest personality initialized and is inactive buildbot # [ 5.861928] VMCI host device registered (name=vmci, major=10, minor=261) buildbot # [ 5.861947] Initialized host personality buildbot # [ 5.920648] systemd[1]: Applying preset policy. buildbot # [ 6.452523] systemd[1]: Populated /etc with preset unit settings. buildbot # [ 6.959251] systemd[1]: initrd-switch-root.service: Deactivated successfully. buildbot # [ 6.960573] systemd[1]: Stopped initrd-switch-root.service. buildbot # [ 6.964474] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. buildbot # [ 6.966879] systemd[1]: Created slice Slice /system/getty. buildbot # [ 6.969174] systemd[1]: Created slice User and Session Slice. buildbot # [ 6.970568] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 6.972162] systemd[1]: Started Forward Password Requests to Wall Directory Watch. buildbot # [ 6.973794] systemd[1]: Expecting device /dev/hvc0... buildbot # [ 6.975286] systemd[1]: Expecting device /dev/ttyAMA0... buildbot # [ 6.976716] systemd[1]: Reached target Local Encrypted Volumes. buildbot # [ 6.978211] systemd[1]: Stopped target initrd-fs.target. buildbot # [ 6.979631] systemd[1]: Stopped target initrd-root-fs.target. buildbot # [ 6.981110] systemd[1]: Stopped target initrd-switch-root.target. buildbot # [ 6.983383] systemd[1]: Reached target Virtual Machines and Containers. buildbot # [ 6.985330] systemd[1]: Reached target Path Units. buildbot # [ 6.987083] systemd[1]: Reached target Remote File Systems. buildbot # [ 6.988875] systemd[1]: Reached target Slice Units. buildbot # [ 6.990641] systemd[1]: Reached target Swaps. buildbot # [ 6.994436] systemd[1]: Listening on Query the User Interactively for a Password. buildbot # [ 6.999195] systemd[1]: Listening on Process Core Dump Socket. buildbot # [ 7.003037] systemd[1]: Listening on Credential Encryption/Decryption. buildbot # [ 7.006875] systemd[1]: Listening on Factory Reset Management. buildbot # [ 7.012049] systemd[1]: Starting Journal Log Access Socket... buildbot # [ 7.014760] systemd[1]: Listening on Journal Audit Socket. buildbot # [ 7.018846] systemd[1]: Listening on Console Output Muting Service Socket. buildbot # [ 7.020423] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. buildbot # [ 7.022014] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.024196] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.035358] systemd[1]: Listening on Disk Repartitioning Service Socket. buildbot # [ 7.036726] systemd[1]: Listening on udev Control Socket. buildbot # [ 7.038179] systemd[1]: Listening on udev Varlink Socket. buildbot # [ 7.042092] systemd[1]: Mounting Huge Pages File System... buildbot # [ 7.046192] systemd[1]: Mounting POSIX Message Queue File System... buildbot # [ 7.054479] systemd[1]: Mounting Kernel Debug File System... buildbot # [ 7.060642] systemd[1]: Mounting Kernel Trace File System... buildbot # [ 7.073043] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 7.091294] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 7.093040] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 7.103183] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 7.105258] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm buildbot # [ 7.107081] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore buildbot # [ 7.179197] systemd[1]: Starting Load Kernel Module fuse... buildbot # [ 7.181150] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 buildbot # [ 7.226457] systemd[1]: Starting Journal Service... buildbot # [ 7.234034] systemd[1]: Starting Load Kernel Modules... buildbot # [ 7.251224] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... buildbot # [ 7.270513] systemd[1]: Starting Remount Root and Kernel File Systems... buildbot # [ 7.276054] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.286833] fuse: init (API version 7.45) buildbot # [ 7.294055] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 7.312326] systemd[1]: Listening on Journal Log Access Socket. buildbot # [ 7.329534] systemd[1]: Mounted Huge Pages File System. buildbot # [ 7.335785] systemd[1]: Mounted POSIX Message Queue File System. buildbot # [ 7.341154] systemd[1]: Mounted Kernel Debug File System. buildbot # [ 7.347449] systemd[1]: Mounted Kernel Trace File System. buildbot # [ 7.354682] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 7.362918] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 7.365010] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 7.365584] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 7.368981] systemd[1]: modprobe@fuse.service: Deactivated successfully. buildbot # [ 7.377058] systemd[1]: Finished Load Kernel Module fuse. buildbot # [ 7.383091] systemd-journald[268]: Collecting audit messages is enabled. buildbot # [ 7.400281] systemd[1]: Mounting FUSE Control File System... buildbot # [ 7.386341] systemd[1]: Queued start job for default target Multi-User System. buildbot # [ 7.391786] systemd[1]: systemd-journald.service: Deactivated successfully.[ 7.414702] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 7.415205] systemd[1]: Started Journal Service. buildbot # buildbot # [ 7.401101] systemd-modules-load[269]: Module 'atkbd' is built in buildbot # [ 7.405744] systemd-modules-load[269]: Module 'loop' is built in buildbot # [ 7.411075] systemd-modules-load[269]: Inserted module 'tls' buildbot # [ 7.417351] systemd[1]: Finished Load Kernel Modules. buildbot # [ 7.438772] EXT4-fs (vda): re-mounted ee12fed6-5d15-49d7-a227-5b2c0389877c. buildbot # [ 7.448636] systemd[1]: Finished Remount Root and Kernel File Systems. buildbot # [ 7.464508] systemd-oomd[270]: No swap; memory pressure usage will be degraded buildbot # [ 7.472924] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. buildbot # [ 7.480815] systemd[1]: Listening on Disk Image Download Service Socket. buildbot # [ 7.491539] systemd[1]: Starting Flush Journal to Persistent Storage... buildbot # [ 7.497509] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore buildbot # [ 7.502503] systemd[1]: Starting Load/Save OS Random Seed... buildbot # [ 7.522336] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 7.524406] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.570206] systemd[1]: Mounted FUSE Control File System. buildbot # [ 7.622233] systemd-journald[268]: Received client request to flush runtime journal. buildbot # [ 7.667340] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 7.673145] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 7.674578] systemd[1]: Finished Load/Save OS Random Seed. buildbot # [ 7.677696] systemd[1]: Reached target First Boot Complete. buildbot # [ 7.681397] systemd[1]: Finished Flush Journal to Persistent Storage. buildbot # [ 7.691602] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 7.754184] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 7.755190] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 7.757496] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 7.956136] systemd[1]: Mounting /run/wrappers... buildbot # [ 8.014288] systemd[1]: Mounted /run/wrappers. buildbot # [ 8.015231] systemd[1]: Reached target Local File Systems. buildbot # [ 8.018963] systemd[1]: Listening on Boot Loader Control Service Socket. buildbot # [ 8.030632] systemd[1]: Starting register-nix-paths.service... buildbot # [ 8.040073] systemd[1]: Starting Create SUID/SGID Wrappers... buildbot # [ 8.040988] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. buildbot # [ 8.046198] systemd[1]: Starting Save Transient machine-id to Disk... buildbot # [ 8.052565] systemd[1]: Starting Create System Files and Directories... buildbot # [ 8.150983] systemd-udevd[301]: Using default interface naming scheme 'v260'. buildbot # [ 8.194381] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. buildbot # [ 8.202463] systemd[1]: Finished Save Transient machine-id to Disk. buildbot # [ 8.296734] systemd[1]: Finished Create System Files and Directories. buildbot # [ 8.313370] systemd[1]: Starting Rebuild Journal Catalog... buildbot # [ 8.322894] systemd[1]: Starting Record System Boot/Shutdown in UTMP... buildbot # [ 8.455834] systemd[1]: Finished Record System Boot/Shutdown in UTMP. buildbot # [ 8.466340] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 8.520550] systemd[1]: Finished Rebuild Journal Catalog. buildbot # [ 8.531514] systemd[1]: Starting Update is Completed... buildbot # [ 8.631714] systemd[1]: Finished Update is Completed. buildbot # [ 9.114780] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. buildbot # [ 9.120245] systemd[1]: Finished Create SUID/SGID Wrappers. buildbot # [ 9.397066] systemd[1]: Finished register-nix-paths.service. buildbot # [ 9.441549] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 9.442574] systemd[1]: Reached target System Initialization. buildbot # [ 9.443950] systemd[1]: Started Discard unused filesystem blocks once a week. buildbot # [ 9.448391] systemd[1]: Started Daily Cleanup of Temporary Directories. buildbot # [ 9.449418] systemd[1]: Reached target Timer Units. buildbot # [ 9.456549] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 9.457642] systemd[1]: Listening on Nix Daemon Socket. buildbot # [ 9.458623] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). buildbot # [ 9.464255] systemd[1]: Listening on Hostname Service Socket. buildbot # [ 9.467291] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. buildbot # [ 9.468858] systemd[1]: Reached target Socket Units. buildbot # [ 9.477420] systemd[1]: Reached target Basic System. buildbot # [ 9.478237] systemd[1]: Starting Import lastlog data into lastlog2 database... buildbot # [ 9.479785] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 9.484224] systemd[1]: Starting Post-Boot Actions... buildbot # [ 9.486597] systemd[1]: Started Reset console on configuration changes. buildbot # [ 9.504733] systemd[1]: Starting resolvconf update... buildbot # [ 9.509941] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met. buildbot # [ 9.558927] systemd[1]: Starting D-Bus System Message Bus... buildbot # [ 9.600086] systemd[1]: Finished Post-Boot Actions. buildbot # [ 9.661140] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 9.669607] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 9.673510] nsncd[389]: Jul 05 06:00:10.315 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 9.685225] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 9.693708] systemd[1]: Starting User Login Management... buildbot # [ 9.705361] systemd[1]: Finished Import lastlog data into lastlog2 database. buildbot # [ 9.786357] dbus-broker-launch[393]: Looking up NSS user entry for 'systemd-timesync'... buildbot # [ 9.803212] dbus-broker-launch[393]: NSS returned no entry for 'systemd-timesync' buildbot # [ 9.809817] dbus-broker-launch[393]: Invalid user-name in /nix/store/6jpdsb3mdy2xmapsyva625wjhcy40gm4-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" buildbot # [ 9.847481] systemd[1]: Started D-Bus System Message Bus. buildbot # [ 9.855815] systemd-logind[411]: New seat seat0. buildbot # [ 9.879406] dbus-broker-launch[393]: Ready buildbot # [ 9.883424] systemd[1]: Started User Login Management. buildbot # [ 9.893047] systemd[1]: Stopped target Host and Network Name Lookups. buildbot # [ 9.897001] systemd[1]: Stopping Host and Network Name Lookups... buildbot # [ 9.899422] systemd[1]: Stopped target User and Group Name Lookups. buildbot # [ 9.906353] systemd[1]: Stopping User and Group Name Lookups... buildbot # [ 9.910305] systemd[1]: Starting linger-users.service... buildbot # [ 9.914845] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... buildbot # [ 9.918618] systemd[1]: nscd.service: Deactivated successfully. buildbot # [ 9.921772] systemd[1]: Stopped Name Service Cache Daemon (nsncd). buildbot # [ 9.950170] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 10.012517] systemd[1]: linger-users.service: Deactivated successfully. buildbot # [ 10.019051] systemd[1]: Finished linger-users.service. buildbot # [ 10.039181] systemd[1]: Finished resolvconf update. buildbot # [ 10.040673] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 10.047242] nsncd[458]: Jul 05 06:00:10.687 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 10.051813] systemd[1]: Reached target Preparation for Network. buildbot # [ 10.056326] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 10.058429] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 10.062072] systemd[1]: Starting DHCP Client... buildbot # [ 10.064747] systemd[1]: Starting Extra networking commands.... buildbot # [ 10.282356] dhcpcd[485]: dhcpcd-10.3.2 starting buildbot # [ 10.301026] dhcpcd[517]: dev: loaded udev buildbot # [ 10.306541] dhcpcd[517]: no valid interfaces found buildbot # [ 10.309936] dhcpcd[517]: libudev: received NULL device buildbot # [ 10.311900] dhcpcd[517]: no valid interfaces found buildbot # [ 10.315293] dhcpcd[517]: libudev: received NULL device buildbot # [ 10.339499] systemd[1]: Finished Extra networking commands.. buildbot # [ 10.342998] systemd[1]: Reached target Network. buildbot # [ 10.350079] systemd[1]: Starting Nginx Web Server... buildbot # [ 10.358667] systemd[1]: Starting PostgreSQL Server... buildbot # [ 10.373324] systemd[1]: Starting SSH Daemon... buildbot # [ 10.391171] systemd[1]: Starting Permit User Sessions... buildbot # [ 10.498854] systemd[1]: Finished Permit User Sessions. buildbot # [ 10.516396] systemd[1]: Started Getty on tty1. buildbot # [ 10.519087] systemd[1]: Reached target Login Prompts. buildbot # [ 10.546479] sshd[530]: Server listening on 0.0.0.0 port 22. buildbot # [ 10.550925] sshd[530]: Server listening on :: port 22. buildbot # [ 10.554443] systemd[1]: Started SSH Daemon. buildbot # [ 10.560433] systemd[1]: Starting Setup git test repository with scheduled effects... buildbot # [ 10.741919] setup-git-repo-start[546]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 10.749072] setup-git-repo-start[546]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 10.757499] setup-git-repo-start[546]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 10.762232] setup-git-repo-start[546]: hint: call: buildbot # [ 10.764928] setup-git-repo-start[546]: hint: buildbot # [ 10.767585] setup-git-repo-start[546]: hint: git config --global init.defaultBranch buildbot # [ 10.774131] setup-git-repo-start[546]: hint: buildbot # [ 10.776629] setup-git-repo-start[546]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 10.781663] setup-git-repo-start[546]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 10.789150] setup-git-repo-start[546]: hint: buildbot # [ 10.791775] setup-git-repo-start[546]: hint: git branch -m buildbot # [ 10.796192] setup-git-repo-start[546]: hint: buildbot # [ 10.800566] setup-git-repo-start[546]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 10.806974] setup-git-repo-start[546]: Initialized empty Git repository in /srv/repos/test-flake.git/ buildbot # [ 10.816512] postgresql-pre-start[543]: The files belonging to this database system will be owned by user "postgres". buildbot # [ 10.822532] postgresql-pre-start[543]: This user must also own the server process. buildbot # [ 10.829814] postgresql-pre-start[543]: The database cluster will be initialized with locale "en_US.UTF-8". buildbot # [ 10.838339] postgresql-pre-start[543]: The default database encoding has accordingly been set to "UTF8". buildbot # [ 10.845479] postgresql-pre-start[543]: The default text search configuration will be set to "english". buildbot # [ 10.852773] postgresql-pre-start[543]: Data page checksums are disabled. buildbot # [ 10.857301] postgresql-pre-start[543]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok buildbot # [ 10.865751] postgresql-pre-start[543]: creating subdirectories ... ok buildbot # [ 10.866692] postgresql-pre-start[543]: selecting dynamic shared memory implementation ... posix buildbot # [ 10.867997] nginx-pre-start[541]: nginx: the configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf syntax is ok buildbot # [ 10.882541] nginx-pre-start[541]: nginx: configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf test is successful buildbot # [ 10.890594] systemd[1]: Started Nginx Web Server. buildbot # [ 10.897102] setup-git-repo-start[551]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 10.898573] setup-git-repo-start[551]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 10.899946] setup-git-repo-start[551]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 10.913975] setup-git-repo-start[551]: hint: call: buildbot # [ 10.916763] setup-git-repo-start[551]: hint: buildbot # [ 10.921186] setup-git-repo-start[551]: hint: git config --global init.defaultBranch buildbot # [ 10.927447] setup-git-repo-start[551]: hint: buildbot # [ 10.932748] setup-git-repo-start[551]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 10.942071] setup-git-repo-start[551]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 10.947668] setup-git-repo-start[551]: hint: buildbot # [ 10.952782] setup-git-repo-start[551]: hint: git branch -m buildbot # [ 10.957377] setup-git-repo-start[551]: hint: buildbot # [ 10.961412] setup-git-repo-start[551]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 10.967586] setup-git-repo-start[551]: Initialized empty Git repository in /tmp/test-flake/.git/ buildbot # [ 11.056657] setup-git-repo-start[562]: [master (root-commit) 4d08523] Initial commit with scheduled effects buildbot # [ 11.065442] setup-git-repo-start[562]: 3 files changed, 131 insertions(+) buildbot # [ 11.068798] setup-git-repo-start[562]: create mode 100644 effects-lib.nix buildbot # [ 11.077554] setup-git-repo-start[562]: create mode 100644 flake.lock buildbot # [ 11.080489] setup-git-repo-start[562]: create mode 100644 flake.nix buildbot # [ 11.084235] postgresql-pre-start[543]: selecting default "max_connections" ... 100 buildbot # [ 11.198621] postgresql-pre-start[543]: selecting default "shared_buffers" ... 128MB buildbot # [ 11.231547] setup-git-repo-start[567]: To /srv/repos/test-flake.git buildbot # [ 11.234723] setup-git-repo-start[567]: * [new branch] master -> master buildbot # [ 11.236495] setup-git-repo-start[567]: branch 'master' set up to track 'origin/master'. buildbot # [ 11.241559] systemd[1]: Finished Setup git test repository with scheduled effects. buildbot # [ 11.389343] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:09.0/virtio8/input/input3 buildbot # [ 11.854826] systemd[1]: Starting Virtual Console Setup... buildbot # [ 11.888865] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 11.899555] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 11.905674] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 11.919928] systemd[1]: Starting Virtual Console Setup... buildbot # [ 12.170003] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. buildbot # [ 12.229582] systemd[1]: Condition check resulted in /dev/ttyAMA0 being skipped. buildbot # [ 12.238262] systemd[1]: Started backdoor.service. buildbot # [ 12.341628] 8021q: 802.1Q VLAN Support v1.8 buildbot # connecting to host... buildbot: Guest shell says: b'Spawning backdoor root shell...\n' buildbot: connected to guest root shell buildbot: (connecting took 12.69 seconds) buildbot: (finished: waiting for the VM to finish booting, in 13.12 seconds) buildbot # [ 12.474126] (udev-worker)[581]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 12.479569] (udev-worker)[583]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 12.485989] (udev-worker)[583]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 12.508272] cfg80211: Loading compiled-in X.509 certificates for regulatory database buildbot # [ 12.511255] systemd-vconsole-setup[597]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 12.551766] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' buildbot # [ 12.552277] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' buildbot # [ 12.557481] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 buildbot # [ 12.557814] cfg80211: failed to load regulatory.db buildbot # [ 12.551968] systemd[1]: Finished Virtual Console Setup. buildbot: (finished: waiting for unit sshd.service, in 13.29 seconds) buildbot: waiting for unit setup-git-repo.service buildbot: (finished: waiting for unit setup-git-repo.service, in 0.09 seconds) buildbot: waiting for unit multi-user.target buildbot # [ 12.818774] systemd[1]: Condition check resulted in Virtio network device being skipped. buildbot # [ 12.831335] systemd[1]: Starting Address configuration of eth1... buildbot # [ 12.889014] 8021q: adding VLAN 0 to HW filter on device eth0 buildbot # [ 12.875479] dhcpcd[517]: eth0: waiting for carrier buildbot # [ 12.879172] dhcpcd[517]: eth0: carrier acquired buildbot # [ 12.906258] dhcpcd[517]: DUID 00:01:00:01:31:dc:af:6d:52:54:00:12:34:56 buildbot # [ 12.914153] dhcpcd[517]: eth0: IAID 00:12:34:56 buildbot # [ 12.914859] dhcpcd[517]: eth0: adding address fe80::5054:ff:fe12:3456 buildbot # [ 12.996520] 8021q: adding VLAN 0 to HW filter on device eth1 buildbot # [ 12.998464] network-addresses-eth1-start[633]: adding address 192.168.1.1/24... done buildbot # [ 13.014798] network-addresses-eth1-start[633]: adding address 2001:db8:1::1/64... done buildbot # [ 13.028832] systemd-logind[411]: Watching system buttons on /dev/input/event0 (gpio-keys) buildbot # [ 13.038762] systemd[1]: Finished Address configuration of eth1. buildbot # [ 13.156061] mousedev: PS/2 mouse device common for all mice buildbot # [ 13.311573] systemd-logind[411]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) buildbot # [ 13.805971] dhcpcd[517]: eth0: soliciting a DHCP lease buildbot # [ 13.812504] dhcpcd[517]: eth0: offered 10.0.2.15 from 10.0.2.2 buildbot # [ 13.820318] dhcpcd[517]: eth0: probing address 10.0.2.15/24 buildbot # [ 14.196885] postgresql-pre-start[543]: selecting default time zone ... UTC buildbot # [ 14.201615] postgresql-pre-start[543]: creating configuration files ... ok buildbot # [ 14.681473] postgresql-pre-start[543]: running bootstrap script ... ok buildbot # [ 14.701530] dhcpcd[517]: eth0: soliciting an IPv6 router buildbot # [ 14.704094] dhcpcd[517]: eth0: Router Advertisement from fe80::2 buildbot # [ 14.706349] dhcpcd[517]: eth0: adding address fec0::5054:ff:fe12:3456/64 buildbot # [ 14.708895] dhcpcd[517]: eth0: adding route to fec0::/64 buildbot # [ 14.709651] dhcpcd[517]: eth0: adding default route via fe80::2 buildbot # [ 15.479583] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. buildbot # [ 15.509764] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 15.514881] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 15.515657] systemd[1]: Stopping Virtual Console Setup... buildbot # [ 15.519447] systemd[1]: Starting Virtual Console Setup... buildbot # [ 15.576596] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 15.577695] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 15.590466] systemd[1]: Starting Virtual Console Setup... buildbot # [ 15.605789] systemd-logind[411]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) buildbot # [ 15.830780] postgresql-pre-start[543]: performing post-bootstrap initialization ... ok buildbot # [ 15.996821] postgresql-pre-start[543]: syncing data to disk ... ok buildbot # [ 15.997838] postgresql-pre-start[543]: initdb: warning: enabling "trust" authentication for local connections buildbot # [ 15.999122] postgresql-pre-start[543]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. buildbot # [ 16.001399] postgresql-pre-start[543]: Success. You can now start the database server using: buildbot # [ 16.004714] postgresql-pre-start[543]: pg_ctl -D /var/lib/postgresql/17 -l logfile start buildbot # [ 16.009073] systemd-vconsole-setup[689]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 16.011965] systemd[1]: Finished Virtual Console Setup. buildbot # [ 16.123569] postgres[696]: [696] LOG: starting PostgreSQL 17.10 on aarch64-unknown-linux-gnu, compiled by clang version 21.1.8, 64-bit buildbot # [ 16.135389] postgres[696]: [696] LOG: listening on IPv6 address "::1", port 5432 buildbot # [ 16.136943] postgres[696]: [696] LOG: listening on IPv4 address "127.0.0.1", port 5432 buildbot # [ 16.138595] postgres[696]: [696] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" buildbot # [ 16.147724] postgres[702]: [702] LOG: database system was shut down at 2026-07-05 06:00:16 GMT buildbot # [ 16.157479] postgres[696]: [696] LOG: database system is ready to accept connections buildbot # [ 16.163274] systemd[1]: Started PostgreSQL Server. buildbot # [ 16.165842] systemd[1]: Starting PostgreSQL Setup Scripts... buildbot # [ 16.400512] postgresql-setup-start[716]: CREATE DATABASE buildbot # [ 16.447645] postgresql-setup-start[727]: CREATE ROLE buildbot # [ 16.470123] postgresql-setup-start[729]: ALTER DATABASE buildbot # [ 16.476828] systemd[1]: Finished PostgreSQL Setup Scripts. buildbot # [ 16.480347] systemd[1]: Reached target PostgreSQL. buildbot # [ 16.483015] systemd[1]: Starting Buildbot Continuous Integration Server.... buildbot # [ 16.536833] buildbot-master-pre-start[734]: mkdir: created directory '/var/lib/buildbot/master' buildbot # [ 19.512080] dhcpcd[517]: eth0: leased 10.0.2.15 for 86400 seconds buildbot # [ 19.512269] dhcpcd[517]: eth0: adding route to 10.0.2.0/24 buildbot # [ 19.512326] dhcpcd[517]: eth0: adding default route via 10.0.2.2 buildbot # [ 19.696451] systemd[1]: Started DHCP Client. buildbot # [ 22.333112] buildbot-master-pre-start[736]: updating existing installation buildbot # [ 22.336165] buildbot-master-pre-start[736]: not touching existing buildbot.tac buildbot # [ 22.337203] buildbot-master-pre-start[736]: creating buildbot.tac.new instead buildbot # [ 22.338215] buildbot-master-pre-start[736]: creating /var/lib/buildbot/master/master.cfg.sample buildbot # [ 22.339361] buildbot-master-pre-start[736]: creating database (postgresql://@/buildbot) buildbot # [ 22.344132] buildbot-master-pre-start[736]: buildmaster configured in /var/lib/buildbot/master buildbot # [ 22.742382] systemd[1]: Started Buildbot Continuous Integration Server.. buildbot # [ 22.748584] systemd[1]: Started Buildbot Worker.. buildbot # [ 22.752753] systemd[1]: Reached target Multi-User System. buildbot # [ 22.754830] systemd[1]: Startup finished in 921ms (kernel) + 3.918s (initrd) + 17.914s (userspace) = 22.753s. buildbot: (finished: waiting for unit multi-user.target, in 10.35 seconds) subtest: Master and worker services start buildbot: waiting for unit buildbot-master.service buildbot: (finished: waiting for unit buildbot-master.service, in 0.09 seconds) buildbot: waiting for unit buildbot-worker.service buildbot: (finished: waiting for unit buildbot-worker.service, in 0.08 seconds) buildbot: waiting for TCP port 8010 on localhost buildbot # [ 24.459700] twistd[841]: Starting worker local-worker-000 buildbot # [ 24.459862] twistd[841]: 2026-07-05T06:00:24+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py... buildbot # [ 24.463296] twistd[841]: 2026-07-05T06:00:25+0000 [-] Loaded. buildbot # [ 24.468884] twistd[841]: 2026-07-05T06:00:25+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 24.471291] twistd[841]: 2026-07-05T06:00:25+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 24.473723] twistd[841]: 2026-07-05T06:00:25+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 24.475283] twistd[841]: 2026-07-05T06:00:25+0000 [-] recording hostname in twistd.hostname buildbot # [ 24.477681] twistd[841]: 2026-07-05T06:00:25+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 24.486328] twistd[841]: 2026-07-05T06:00:25+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect in 1.8841192683499353 seconds. buildbot # [ 24.489325] twistd[841]: 2026-07-05T06:00:25+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 26.373406] twistd[841]: 2026-07-05T06:00:27+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 26.378416] twistd[841]: 2026-07-05T06:00:27+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect in 2.479073425493245 seconds. buildbot # [ 26.383293] twistd[841]: 2026-07-05T06:00:27+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 26.501504] twistd[840]: 2026-07-05T06:00:24+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac... buildbot # [ 26.503535] twistd[840]: 2026-07-05T06:00:27+0000 [-] Loaded. buildbot # [ 26.504783] twistd[840]: 2026-07-05T06:00:27+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 26.507369] twistd[840]: 2026-07-05T06:00:27+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 26.509531] twistd[840]: 2026-07-05T06:00:27+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0 buildbot # [ 26.519069] twistd[840]: 2026-07-05T06:00:27+0000 [-] Loading configuration from '/nix/store/lkfkk9wk4n6j6iafap6c6lgmx76rs7hz-master.cfg' buildbot # [ 27.377261] twistd[840]: 2026-07-05T06:00:28+0000 [-] Setting up database with URL 'postgresql://@/buildbot' buildbot # [ 27.500659] twistd[840]: 2026-07-05T06:00:28+0000 [-] adding 9 new builders, removing 0 buildbot # [ 27.634138] twistd[840]: 2026-07-05T06:00:28+0000 [-] adding 3 new services, removing 0 buildbot # [ 27.785311] twistd[840]: 2026-07-05T06:00:28+0000 [-] adding 1 new change_sources, removing 0 buildbot # [ 27.791665] twistd[840]: 2026-07-05T06:00:28+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 27.803307] twistd[840]: 2026-07-05T06:00:28+0000 [-] adding 14 new schedulers, removing 0 buildbot # [ 27.995431] twistd[840]: 2026-07-05T06:00:28+0000 [-] BuildbotSite starting on 8010 buildbot # [ 27.997909] twistd[840]: 2026-07-05T06:00:28+0000 [buildbot.www.service.BuildbotSite#info] Starting factory buildbot # [ 27.999893] twistd[840]: 2026-07-05T06:00:28+0000 [-] adding 5 new workers, removing 0 buildbot # [ 28.010625] twistd[840]: 2026-07-05T06:00:28+0000 [-] PBServerFactory starting on 9989 buildbot # [ 28.013079] twistd[840]: 2026-07-05T06:00:28+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory buildbot # [ 28.050017] twistd[840]: 2026-07-05T06:00:28+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 28.051480] twistd[840]: 2026-07-05T06:00:28+0000 [-] recording hostname in twistd.hostname buildbot # [ 28.054006] twistd[840]: 2026-07-05T06:00:28+0000 [-] message from master: attached buildbot # [ 28.056446] twistd[840]: 2026-07-05T06:00:28+0000 [-] Got workerinfo from '__Janitor' buildbot # [ 28.065796] twistd[840]: 2026-07-05T06:00:28+0000 [-] bot attached buildbot # [ 28.066711] twistd[840]: 2026-07-05T06:00:28+0000 [-] Worker __Janitor attached to __Janitor buildbot # [ 28.067785] twistd[840]: 2026-07-05T06:00:28+0000 [-] message from master: attached buildbot # [ 28.110998] sshd-session[903]: Accepted publickey for root from ::1 port 40882 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 28.122309] twistd[840]: 2026-07-05T06:00:28+0000 [-] BuildMaster is running buildbot # [ 28.131672] sshd-session[903]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 28.171003] systemd[1]: Created slice Slice /user/0. buildbot # [ 28.176136] systemd[1]: Starting User Runtime Directory /run/user/0... buildbot # [ 28.192623] systemd-logind[411]: New session '1' of user 'root' with class 'user' and type 'tty'. buildbot # [ 28.223976] systemd[1]: Finished User Runtime Directory /run/user/0. buildbot # [ 28.229602] systemd[1]: Starting User Manager for UID 0... buildbot # [ 28.270200] (systemd)[909]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 28.276097] systemd-logind[411]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'. buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded! buildbot: (finished: waiting for TCP port 8010 on localhost, in 5.41 seconds) buildbot: waiting for success: curl --fail --head http://localhost:8010 buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload [ 28.680726] systemd[909]: Queued start job for default target Main User Target. buildbot # Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 [ 28.692926] systemd[909]: Created slice User Application Slice. buildbot # [ 28.694201] systemd[909]: Started Daily Cleanup of User's Temporary Directories. buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 [ 28.700235] systemd[909]: Reached target Paths. buildbot # [ 28.701484] systemd[909]: Reached target Timers. buildbot # [ 28.703242] systemd[909]: Starting D-Bus User Message Bus Socket... buildbot # 0 [ 28.705937] systemd[909]: Starting Create User Files and Directories... buildbot # 0 0 buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.13 seconds) (finished: subtest: Master and worker services start, in 5.71 seconds) subtest: Project is registered buildbot: waiting for success: curl http://localhost:8010/api/v2/projects buildbot # [ 28.762904] systemd[909]: Finished Create User Files and Directories. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 10936 0 0100 266 100 266 0 0 8445 0 0100 266 100 266 0 0 7259 0 0 buildbot # [ 28.825545] systemd[909]: Listening on D-Bus User Message Bus Socket. buildbot # [ 28.829717] systemd[909]: Reached target Sockets. buildbot # [ 28.830605] systemd[909]: Reached target Basic System. buildbot # [ 28.831419] systemd[909]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system buildbot # [ 28.833127] systemd[909]: Reached target Main User Target. buildbot # [ 28.834082] systemd[909]: Startup finished in 528ms. buildbot # [ 28.834878] systemd[1]: Started User Manager for UID 0. buildbot # [ 28.838534] systemd[1]: Started Session 1 of User root. buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.12 seconds) (finished: subtest: Project is registered, in 0.12 seconds) subtest: CLI list-schedules works buildbot: must succeed: cd /tmp/test-flake buildbot-effects list-schedules buildbot # [ 28.863210] twistd[841]: 2026-07-05T06:00:29+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 28.875859] twistd[840]: 2026-07-05T06:00:29+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=34874) buildbot # [ 28.879975] twistd[841]: 2026-07-05T06:00:29+0000 [Broker,client] message from master: attached buildbot # [ 28.898825] sshd-session[933]: Received disconnect from ::1 port 40882:11: disconnected by user buildbot # [ 28.903356] systemd[1]: session-1.scope: Deactivated successfully. buildbot # [ 28.910184] twistd[840]: 2026-07-05T06:00:29+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000' buildbot # [ 28.915780] sshd-session[933]: Disconnected from user root ::1 port 40882 buildbot # [ 28.917073] systemd-logind[411]: Session 1 logged out. Waiting for processes to exit. buildbot # [ 28.920764] sshd-session[903]: pam_unix(sshd:session): session closed for user root buildbot # [ 28.927712] systemd-logind[411]: Removed session 1. buildbot # [ 28.943856] twistd[840]: 2026-07-05T06:00:29+0000 [-] bot attached buildbot # [ 28.950317] twistd[840]: 2026-07-05T06:00:29+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot buildbot # [ 28.951971] twistd[840]: 2026-07-05T06:00:29+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval buildbot # [ 28.958707] twistd[840]: 2026-07-05T06:00:29+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build buildbot # [ 28.974194] twistd[840]: 2026-07-05T06:00:29+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed buildbot # [ 28.975776] twistd[840]: 2026-07-05T06:00:29+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect buildbot # [ 29.021691] twistd[840]: 2026-07-05T06:00:29+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval buildbot # [ 29.023220] twistd[840]: 2026-07-05T06:00:29+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure buildbot # [ 29.060359] twistd[840]: 2026-07-05T06:00:29+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect buildbot # [ 29.061966] twistd[841]: 2026-07-05T06:00:29+0000 [Broker,client] message from master: attached buildbot # [ 29.063127] twistd[841]: 2026-07-05T06:00:29+0000 [Broker,client] message from master: attached buildbot # [ 29.090013] twistd[841]: 2026-07-05T06:00:29+0000 [Broker,client] message from master: attached buildbot # [ 29.100621] twistd[841]: 2026-07-05T06:00:29+0000 [Broker,client] message from master: attached buildbot # [ 29.114708] twistd[841]: 2026-07-05T06:00:29+0000 [Broker,client] message from master: attached buildbot # [ 29.115930] twistd[841]: 2026-07-05T06:00:29+0000 [Broker,client] message from master: attached buildbot # [ 29.135236] twistd[841]: 2026-07-05T06:00:29+0000 [Broker,client] message from master: attached buildbot # [ 29.146459] twistd[841]: 2026-07-05T06:00:29+0000 [Broker,client] message from master: attached buildbot # [ 29.147647] twistd[841]: 2026-07-05T06:00:29+0000 [Broker,client] Connected to buildmaster; worker is ready buildbot # [ 29.157077] twistd[841]: 2026-07-05T06:00:29+0000 [Broker,client] sending application-level keepalives every 600 seconds buildbot # [ 29.323019] sshd-session[947]: Accepted publickey for root from ::1 port 40886 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 29.340613] sshd-session[947]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 29.351314] systemd-logind[411]: New session '3' of user 'root' with class 'user' and type 'tty'. buildbot # [ 29.357691] systemd[1]: Started Session 3 of User root. buildbot # [ 29.411985] sshd-session[952]: Received disconnect from ::1 port 40886:11: disconnected by user buildbot # [ 29.414298] sshd-session[952]: Disconnected from user root ::1 port 40886 buildbot # [ 29.415897] sshd-session[947]: pam_unix(sshd:session): session closed for user root buildbot # [ 29.423384] systemd[1]: session-3.scope: Deactivated successfully. buildbot # [ 29.427485] systemd-logind[411]: Session 3 logged out. Waiting for processes to exit. buildbot # [ 29.429758] systemd-logind[411]: Removed session 3. buildbot # [ 29.459034] twistd[840]: 2026-07-05T06:00:30+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: (finished: must succeed: cd /tmp/test-flake buildbot-effects list-schedules , in 0.77 seconds) (finished: subtest: CLI list-schedules works, in 0.77 seconds) subtest: Push a new commit to trigger build buildbot: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master buildbot # Enumerating objects: 5, done. buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done. buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done. buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 295 bytes | 295.00 KiB/s, done. buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0) buildbot # To /srv/repos/test-flake.git buildbot # 4d08523..3167a32 master -> master buildbot: (finished: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master , in 0.11 seconds) (finished: subtest: Push a new commit to trigger build, in 0.11 seconds) subtest: Wait for nix-eval build to complete buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2995 0 0100 51 100 51 0 0 2625 0 0100 51 100 51 0 0 2302 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3825 0 0100 51 100 51 0 0 2788 0 0100 51 100 51 0 0 2268 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4042 0 0100 51 100 51 0 0 3015 0 0100 51 100 51 0 0 2443 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4016 0 0100 51 100 51 0 0 3022 0 0100 51 100 51 0 0 2460 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4104 0 0100 51 100 51 0 0 3035 0 0100 51 100 51 0 0 2393 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4335 0 0100 51 100 51 0 0 3192 0 0100 51 100 51 0 0 2569 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3673 0 0100 51 100 51 0 0 2707 0 0100 51 100 51 0 0 2184 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3676 0 0100 51 100 51 0 0 2815 0 0100 51 100 51 0 0 2326 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot # [ 38.062752] sshd-session[1017]: Accepted publickey for root from ::1 port 58916 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 38.085631] sshd-session[1017]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 38.100428] systemd-logind[411]: New session '4' of user 'root' with class 'user' and type 'tty'. buildbot # [ 38.108940] systemd[1]: Started Session 4 of User root. buildbot # [ 38.151067] sshd-session[1020]: Received disconnect from ::1 port 58916:11: disconnected by user buildbot # [ 38.154137] sshd-session[1020]: Disconnected from user root ::1 port 58916 buildbot # [ 38.155843] sshd-session[1017]: pam_unix(sshd:session): session closed for user root buildbot # [ 38.169353] systemd[1]: session-4.scope: Deactivated successfully. buildbot # [ 38.172713] systemd-logind[411]: Session 4 logged out. Waiting for processes to exit. buildbot # [ 38.175118] systemd-logind[411]: Removed session 4. buildbot # [ 38.377357] sshd-session[1025]: Accepted publickey for root from ::1 port 58920 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 38.401974] sshd-session[1025]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 38.416115] systemd-logind[411]: New session '5' of user 'root' with class 'user' and type 'tty'. buildbot # [ 38.429483] systemd[1]: Started Session 5 of User root. buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 38.487218] sshd-session[1028]: Received disconnect from ::1 port 58920:11: disconnected by user buildbot # [ 38.496547] sshd-session[1028]: Disconnected from user root ::1 port 58920 buildbot # [ 38.506498] sshd-session[1025]: pam_unix(sshd:session): session closed for user root buildbot # [ 38.507927] systemd[1]: session-5.scope: Deactivated successfully. buildbot # [ 38.513015] systemd-logind[411]: Session 5 logged out. Waiting for processes to exit. buildbot # [ 38.515157] systemd-logind[411]: Removed session 5. buildbot # [ 38.540757] twistd[840]: 2026-07-05T06:00:39+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0[ 38.603061] twistd[840]: 2026-07-05T06:00:39+0000 [-] gitpoller: processing 1 changes: ['3167a32c716d8ebce430ae20f2a5ed3e38d94a98'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master" buildbot # 100 51 100 51 0 0 570 0 0100 51 100 51 0 0 554 0 0100 51 100 51 0 0 500 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.21 seconds) buildbot # [ 38.719719] twistd[840]: 2026-07-05T06:00:39+0000 [-] added change with revision 3167a32c716d8ebce430ae20f2a5ed3e38d94a98 to database buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2835 0 0100 51 100 51 0 0 2289 0 0100 51 100 51 0 0 1968 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2700 0 0100 51 100 51 0 0 2163 0 0100 51 100 51 0 0 1851 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3824 0 0100 51 100 51 0 0 2764 0 0100 51 100 51 0 0 2171 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3559 0 0100 51 100 51 0 0 2598 0 0100 51 100 51 0 0 2098 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot # [ 43.785072] twistd[840]: 2026-07-05T06:00:44+0000 [-] added buildset 1 to database buildbot # [ 43.953069] twistd[840]: 2026-07-05T06:00:44+0000 [-] starting build using worker buildbot # [ 43.963295] twistd[840]: 2026-07-05T06:00:44+0000 [-] .startBuild buildbot # [ 44.043925] twistd[840]: 2026-07-05T06:00:44+0000 [-] acquireLocks(worker , locks []) buildbot # [ 44.048984] twistd[840]: 2026-07-05T06:00:44+0000 [-] starting build .. pinging the worker buildbot # [ 44.054295] twistd[840]: 2026-07-05T06:00:44+0000 [-] sending ping buildbot # [ 44.056511] twistd[840]: 2026-07-05T06:00:44+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 44.058263] twistd[841]: 2026-07-05T06:00:44+0000 [Broker,client] message from master: ping buildbot # [ 44.081094] twistd[840]: 2026-07-05T06:00:44+0000 [-] : RemoteCommand.run [0] buildbot # [ 44.086245] twistd[840]: 2026-07-05T06:00:44+0000 [-] command '['git', '--version']' in dir 'build' buildbot # [ 44.087669] twistd[841]: 2026-07-05T06:00:44+0000 [Broker,client] (command 0): startCommand:shell buildbot # [ 44.092785] twistd[841]: 2026-07-05T06:00:44+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand buildbot # [ 44.094412] twistd[841]: 2026-07-05T06:00:44+0000 [Broker,client] (command ['git', '--version']): git --version buildbot # [ 44.095879] twistd[841]: 2026-07-05T06:00:44+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 44.104396] twistd[841]: 2026-07-05T06:00:44+0000 [Broker,client] (command ['git', '--version']): watching logfiles {} buildbot # [ 44.106114] twistd[841]: 2026-07-05T06:00:44+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version'] buildbot # [ 44.107756] twistd[841]: 2026-07-05T06:00:44+0000 [Broker,client] (command ['git', '--version']): using PTY: False buildbot # [ 44.119010] twistd[841]: 2026-07-05T06:00:44+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.027455 buildbot # [ 44.121086] twistd[841]: 2026-07-05T06:00:44+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 44.145942] twistd[840]: 2026-07-05T06:00:44+0000 [Broker,0,127.0.0.1] rc=0 buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent L[ 44.194656] twistd[840]: 2026-07-05T06:00:44+0000 [-] : RemoteCommand.run [1] buildbot # eft Speed buildbot # 0 0 0 0 0 0 0[ 44.200809] twistd[840]: 2026-07-05T06:00:44+0000 [Broker,0,127.0.0.1] rc=2 buildbot # [ 44.202643] twistd[841]: 2026-07-05T06:00:44+0000 [Broker,client] (command 1): startCommand:stat buildbot # [ 44.203868] twistd[841]: 2026-07-05T06:00:44+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched' buildbot # 0 0100 401 100 401 0 0 12811 0 0100 [ 44.217099] twistd[841]: 2026-07-05T06:00:44+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) buildbot # 401 100 401 0 0 11869 0 0100 401 100 401 0 0 10087 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot # [ 44.241978] twistd[840]: 2026-07-05T06:00:44+0000 [-] : RemoteCommand.run [2] buildbot # [ 44.246136] twistd[841]: 2026-07-05T06:00:44+0000 [Broker,client] (command 2): startCommand:mkdir buildbot # [ 44.247410] twistd[841]: 2026-07-05T06:00:44+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) buildbot # [ 44.252391] twistd[840]: 2026-07-05T06:00:44+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.256853] twistd[840]: 2026-07-05T06:00:44+0000 [-] : RemoteCommand.run [3] buildbot # [ 44.289386] twistd[841]: 2026-07-05T06:00:44+0000 [Broker,client] (command 3): startCommand:downloadFile buildbot # [ 44.292299] twistd[841]: 2026-07-05T06:00:44+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) buildbot # [ 44.297489] twistd[840]: 2026-07-05T06:00:44+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.303144] twistd[840]: 2026-07-05T06:00:44+0000 [-] : RemoteCommand.run [4] buildbot # [ 44.341143] twistd[841]: 2026-07-05T06:00:44+0000 [Broker,client] (command 4): startCommand:listdir buildbot # [ 44.342719] twistd[841]: 2026-07-05T06:00:44+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) buildbot # [ 44.349181] twistd[840]: 2026-07-05T06:00:44+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.355362] twistd[840]: 2026-07-05T06:00:45+0000 [-] No git repo present, making full clone buildbot # [ 44.356972] twistd[840]: 2026-07-05T06:00:45+0000 [-] : RemoteCommand.run [5] buildbot # [ 44.361712] twistd[840]: 2026-07-05T06:00:45+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build' buildbot # [ 44.389369] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command 5): startCommand:shell buildbot # [ 44.395317] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand buildbot # [ 44.410032] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress buildbot # [ 44.433622] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 44.441289] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {} buildbot # [ 44.446983] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress'] buildbot # [ 44.457255] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False buildbot # [ 44.656749] sshd-session[1067]: Accepted publickey for root from ::1 port 40198 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 44.676174] sshd-session[1067]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 44.691566] systemd-logind[411]: New session '6' of user 'root' with class 'user' and type 'tty'. buildbot # [ 44.700231] systemd[1]: Started Session 6 of User root. buildbot # [ 44.758127] sshd-session[1070]: Received disconnect from ::1 port 40198:11: disconnected by user buildbot # [ 44.760297] sshd-session[1070]: Disconnected from user root ::1 port 40198 buildbot # [ 44.763037] sshd-session[1067]: pam_unix(sshd:session): session closed for user root buildbot # [ 44.767312] systemd[1]: session-6.scope: Deactivated successfully. buildbot # [ 44.771826] systemd-logind[411]: Session 6 logged out. Waiting for processes to exit. buildbot # [ 44.773952] systemd-logind[411]: Removed session 6. buildbot # [ 44.789643] twistd[841]: 2026-07-05T06:00:45+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.396415 buildbot # [ 44.800928] twistd[841]: 2026-07-05T06:00:45+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) buildbot # [ 44.803614] twistd[840]: 2026-07-05T06:00:45+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.826509] twistd[840]: 2026-07-05T06:00:45+0000 [-] : RemoteCommand.run [6] buildbot # [ 44.830843] twistd[840]: 2026-07-05T06:00:45+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98']' in dir 'build' buildbot # [ 44.841114] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command 6): startCommand:shell buildbot # [ 44.845104] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98']): RunProcess._startCommand buildbot # [ 44.854070] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f 3167a32c716d8ebce430ae20f2a5ed3e38d94a98 buildbot # [ 44.859612] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 44.864562] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98']): watching logfiles {} buildbot # [ 44.870531] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'3167a32c716d8ebce430ae20f2a5ed3e38d94a98'] buildbot # [ 44.876625] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98']): using PTY: False buildbot # [ 44.891674] twistd[841]: 2026-07-05T06:00:45+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98']): command finished with signal None, exit code 0, elapsedTime: 0.047405 buildbot # [ 44.895912] twistd[841]: 2026-07-05T06:00:45+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) buildbot # [ 44.899969] twistd[840]: 2026-07-05T06:00:45+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.924072] twistd[840]: 2026-07-05T06:00:45+0000 [-] : RemoteCommand.run [7] buildbot # [ 44.927375] twistd[840]: 2026-07-05T06:00:45+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build' buildbot # [ 44.948943] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command 7): startCommand:shell buildbot # [ 44.952459] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand buildbot # [ 44.955788] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive buildbot # [ 44.966319] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 44.970709] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {} buildbot # [ 44.974476] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive'] buildbot # [ 44.982504] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False buildbot # [ 45.091375] twistd[841]: 2026-07-05T06:00:45+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.138912 buildbot # [ 45.099080] twistd[841]: 2026-07-05T06:00:45+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) buildbot # [ 45.102868] twistd[840]: 2026-07-05T06:00:45+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.118203] twistd[840]: 2026-07-05T06:00:45+0000 [-] : RemoteCommand.run [8] buildbot # [ 45.121040] twistd[840]: 2026-07-05T06:00:45+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build' buildbot # [ 45.140903] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command 8): startCommand:shell buildbot # [ 45.144411] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand buildbot # [ 45.146001] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD buildbot # [ 45.147483] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 45.155253] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {} buildbot # [ 45.157250] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD'] buildbot # [ 45.160949] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False buildbot # [ 45.168078] twistd[841]: 2026-07-05T06:00:45+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.024485 buildbot # [ 45.170031] twistd[841]: 2026-07-05T06:00:45+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) buildbot # [ 45.198172] twistd[840]: 2026-07-05T06:00:45+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.221559] twistd[840]: 2026-07-05T06:00:45+0000 [-] Got Git revision 3167a32c716d8ebce430ae20f2a5ed3e38d94a98 buildbot # [ 45.223170] twistd[840]: 2026-07-05T06:00:45+0000 [-] : RemoteCommand.run [9] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 45.246822] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command 9): startCommand:rmdir buildbot # [ 45.252298] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand buildbot # [ 45.254879] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot buildbot # [ 45.261724] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs) buildbot # [ 45.265899] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {} buildbot # [ 45.270202] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot'] buildbot # [ 45.276895] twistd[841]: 2026-07-05T06:00:45+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False buildbot # [ 45.289628] twistd[841]: 2026-07-05T06:00:45+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.043710 buildbot # [ 45.294345] twistd[841]: 2026-07-05T06:00:45+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) buildbot # [ 45.305609] twistd[840]: 2026-07-05T06:00:45+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.334849] twistd[840]: 2026-07-05T06:00:45+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): [] buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left [ 45.365761] twistd[840]: 2026-07-05T06:00:46+0000 [-] step 'git' complete: success (None) buildbot # Speed buildbot # 0 0 0 0 0 0 0 0 [ 45.376059] twistd[840]: 2026-07-05T06:00:46+0000 [-] acquireLocks(step NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(, )]) buildbot # 0100 401 100 401 0 0 10163 0 0100 401 100 401 0 0 9489 0 0100 401 100 401 0[ 45.404113] twistd[840]: 2026-07-05T06:00:46+0000 [-] : RemoteCommand.run [10] buildbot # [ 45.406171] twistd[840]: 2026-07-05T06:00:46+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build' buildbot # [ 45.407942] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command 10): startCommand:shell buildbot # 0 8980 0 0 buildbot # [ 45.420028] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand buildbot # [ 45.423294] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi' buildbot # [ 45.427161] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 45.430674] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {} buildbot # [ 45.433159] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'] buildbot # [ 45.436383] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.21 seconds) buildbot # [ 45.450947] twistd[841]: 2026-07-05T06:00:46+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.040143 buildbot # [ 45.454368] twistd[841]: 2026-07-05T06:00:46+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) buildbot # [ 45.461751] twistd[840]: 2026-07-05T06:00:46+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.466823] twistd[840]: 2026-07-05T06:00:46+0000 [-] : RemoteCommand.run [11] buildbot # [ 45.471708] twistd[840]: 2026-07-05T06:00:46+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build' buildbot # [ 45.505291] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command 11): startCommand:shell buildbot # [ 45.511484] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand buildbot # [ 45.518971] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks' buildbot # [ 45.527098] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 45.533249] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {} buildbot # [ 45.538337] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks'] buildbot # [ 45.546764] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False buildbot # [ 45.660450] systemd[1]: Started Nix Daemon. buildbot # [ 45.759558] nix-daemon[1115]: accepted connection from pid 1114, user buildbot-worker buildbot # [ 45.785199] twistd[841]: 2026-07-05T06:00:46+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 0.277400 buildbot # [ 45.798352] twistd[841]: 2026-07-05T06:00:46+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) buildbot # [ 45.803056] twistd[840]: 2026-07-05T06:00:46+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.839689] twistd[840]: 2026-07-05T06:00:46+0000 [-] releaseLocks(NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(, )] buildbot # [ 45.860055] twistd[840]: 2026-07-05T06:00:46+0000 [-] step 'Evaluate flake' complete: success (None) buildbot # [ 45.901555] twistd[840]: 2026-07-05T06:00:46+0000 [-] releaseLocks(BuildTrigger(project=, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): [] buildbot # [ 45.921344] twistd[840]: 2026-07-05T06:00:46+0000 [-] step 'build flake' complete: success (None) buildbot # [ 45.938464] twistd[840]: 2026-07-05T06:00:46+0000 [-] releaseLocks(ProcessSkippedBuilds(project=, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=. at 0xf615dff70c20>, hideStepIf=. at 0xf615dff70cc0>)): [] buildbot # [ 45.949199] twistd[840]: 2026-07-05T06:00:46+0000 [-] step 'Process skipped builds' complete: skipped (None) buildbot # [ 45.967419] twistd[840]: 2026-07-05T06:00:46+0000 [-] : RemoteCommand.run [12] buildbot # [ 45.974899] twistd[840]: 2026-07-05T06:00:46+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build' buildbot # [ 45.979129] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command 12): startCommand:shell buildbot # [ 45.980786] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand buildbot # [ 45.985418] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ buildbot # [ 45.989150] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 45.992725] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {} buildbot # [ 45.995191] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/'] buildbot # [ 45.999093] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False buildbot # [ 46.005947] twistd[841]: 2026-07-05T06:00:46+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.039574 buildbot # [ 46.009268] twistd[841]: 2026-07-05T06:00:46+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) buildbot # [ 46.020927] twistd[840]: 2026-07-05T06:00:46+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 46.044095] twistd[840]: 2026-07-05T06:00:46+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): [] buildbot # [ 46.163801] twistd[840]: 2026-07-05T06:00:46+0000 [-] step 'Cleanup drv paths' complete: success (None) buildbot # [ 46.181662] twistd[840]: 2026-07-05T06:00:46+0000 [-] : RemoteCommand.run [13] buildbot # [ 46.188545] twistd[840]: 2026-07-05T06:00:46+0000 [-] command '['buildbot-effects', 'list', '--rev', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 46.191325] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command 13): startCommand:shell buildbot # [ 46.194955] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 46.198168] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev 3167a32c716d8ebce430ae20f2a5ed3e38d94a98 --branch master --repo test-flake buildbot # [ 46.202069] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 46.205968] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 46.209136] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'3167a32c716d8ebce430ae20f2a5ed3e38d94a98', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 46.213510] twistd[841]: 2026-07-05T06:00:46+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 15753 0 0100 401 100 401 0 0 14360 0 [ 46.548457] nix-daemon[1115]: accepted connection from pid 1125, user buildbot-worker buildbot # 0100 401 100 401 0 0 11338 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds) buildbot # [ 46.589247] twistd[841]: 2026-07-05T06:00:47+0000 [-] (command ['buildbot-effects', 'list', '--rev', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.409497 buildbot # [ 46.596254] twistd[841]: 2026-07-05T06:00:47+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) buildbot # [ 46.598458] twistd[840]: 2026-07-05T06:00:47+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 46.633450] twistd[840]: 2026-07-05T06:00:47+0000 [-] releaseLocks(BuildbotEffectsCommand(project=, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=. at 0xf615dff71440>, logEnviron=False)): [] buildbot # [ 46.643421] twistd[840]: 2026-07-05T06:00:47+0000 [-] step 'Evaluate effects' complete: success (None) buildbot # [ 46.658052] twistd[840]: 2026-07-05T06:00:47+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): [] buildbot # [ 46.665903] twistd[840]: 2026-07-05T06:00:47+0000 [-] step 'Buildbot effect' complete: success (None) buildbot # [ 46.680121] twistd[840]: 2026-07-05T06:00:47+0000 [-] : RemoteCommand.run [14] buildbot # [ 46.682801] twistd[840]: 2026-07-05T06:00:47+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 46.692321] twistd[841]: 2026-07-05T06:00:47+0000 [Broker,client] (command 14): startCommand:shell buildbot # [ 46.693583] twistd[841]: 2026-07-05T06:00:47+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 46.697331] twistd[841]: 2026-07-05T06:00:47+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev 3167a32c716d8ebce430ae20f2a5ed3e38d94a98 --branch master --repo test-flake buildbot # [ 46.701288] twistd[841]: 2026-07-05T06:00:47+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 46.704967] twistd[841]: 2026-07-05T06:00:47+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 46.707823] twistd[841]: 2026-07-05T06:00:47+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'3167a32c716d8ebce430ae20f2a5ed3e38d94a98', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 46.712343] twistd[841]: 2026-07-05T06:00:47+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot # [ 46.987374] nix-daemon[1115]: accepted connection from pid 1137, user buildbot-worker buildbot # [ 47.023565] twistd[841]: 2026-07-05T06:00:47+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', '3167a32c716d8ebce430ae20f2a5ed3e38d94a98', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.337161 buildbot # [ 47.030930] twistd[841]: 2026-07-05T06:00:47+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) buildbot # [ 47.036695] twistd[840]: 2026-07-05T06:00:47+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 47.071683] twistd[840]: 2026-07-05T06:00:47+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=. at 0xf615dff71620>, hideStepIf=. at 0xf615dff716c0>, logEnviron=False)): [] buildbot # [ 47.087402] twistd[840]: 2026-07-05T06:00:47+0000 [-] step 'Evaluate scheduled effects' complete: success (None) buildbot # [ 47.091687] twistd[840]: 2026-07-05T06:00:47+0000 [-] : build finished buildbot # [ 47.116568] twistd[840]: 2026-07-05T06:00:47+0000 [-] releaseLocks(): [] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 19731 0 0100 411 100 411 0 0 16327 0 0100 411 100 411 0 0 14236 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) (finished: subtest: Wait for nix-eval build to complete, in 17.96 seconds) subtest: Schedule cache is created buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds) buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds) (finished: subtest: Schedule cache is created, in 0.06 seconds) subtest: Nightly schedulers are created buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 42868 0 0100 3793 100 3793 0 0 41706 0 0100 3793 100 3793 0 0 39841 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.15 seconds) buildbot # [ 48.064781] sshd-session[1175]: Accepted publickey for root from ::1 port 40208 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 48.083949] sshd-session[1175]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 48.099509] systemd-logind[411]: New session '7' of user 'root' with class 'user' and type 'tty'. buildbot # [ 48.106311] systemd[1]: Started Session 7 of User root. buildbot # [ 48.144334] sshd-session[1178]: Received disconnect from ::1 port 40208:11: disconnected by user buildbot # [ 48.148168] sshd-session[1178]: Disconnected from user root ::1 port 40208 buildbot # [ 48.151157] sshd-session[1175]: pam_unix(sshd:session): session closed for user root buildbot # [ 48.157507] systemd[1]: session-7.scope: Deactivated successfully. buildbot # [ 48.165306] systemd-logind[411]: Session 7 logged out. Waiting for processes to exit. buildbot # [ 48.173619] systemd-logind[411]: Removed session 7. buildbot # [ 48.365102] sshd-session[1183]: Accepted publickey for root from ::1 port 40212 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 48.387036] sshd-session[1183]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 48.403348] systemd-logind[411]: New session '8' of user 'root' with class 'user' and type 'tty'. buildbot # [ 48.410386] systemd[1]: Started Session 8 of User root. buildbot # [ 48.451862] sshd-session[1186]: Received disconnect from ::1 port 40212:11: disconnected by user buildbot # [ 48.454180] sshd-session[1186]: Disconnected from user root ::1 port 40212 buildbot # [ 48.455260] sshd-session[1183]: pam_unix(sshd:session): session closed for user root buildbot # [ 48.460988] systemd[1]: session-8.scope: Deactivated successfully. buildbot # [ 48.467080] systemd-logind[411]: Session 8 logged out. Waiting for processes to exit. buildbot # [ 48.470530] systemd-logind[411]: Removed session 8. buildbot # [ 48.475022] twistd[840]: 2026-07-05T06:00:49+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 34477 0 0100 3793 100 3793 0 0 33732 0 0100 3793 100 3793 0 0 32974 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.19 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 37096 0 0100 3793 100 3793 0 0 36175 0 0100 3793 100 3793 0 0 35371 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.18 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 37062 0 0100 3793 100 3793 0 0 35385 0 0100 3793 100 3793 0 0 34556 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.19 seconds) buildbot # [ 52.067214] twistd[840]: 2026-07-05T06:00:52+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake buildbot # [ 52.074128] twistd[840]: 2026-07-05T06:00:52+0000 [-] beginning configuration update buildbot # [ 52.078799] twistd[840]: 2026-07-05T06:00:52+0000 [-] Loading configuration from '/nix/store/lkfkk9wk4n6j6iafap6c6lgmx76rs7hz-master.cfg' buildbot # [ 52.152640] twistd[840]: 2026-07-05T06:00:52+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 52.183220] twistd[840]: 2026-07-05T06:00:52+0000 [-] adding 1 new schedulers, removing 0 buildbot # [ 52.311265] twistd[840]: 2026-07-05T06:00:52+0000 [-] configuration update complete (took 0.238 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 37749 0 0100 4079 100 4079 0 0 36886 0 0100 4079 100 4079 0 0 36066 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.19 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 43271 0 0100 4079 100 4079 0 0 42110 0 0100 4079 100 4079 0 0 41106 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.15 seconds) (finished: subtest: Nightly schedulers are created, in 5.04 seconds) subtest: Scheduled effect builder exists buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 145.3k 0 0100 2371 100 2371 0 0 126.2k 0 0100 2371 100 2371 0 0 110.0k 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.07 seconds) (finished: subtest: Scheduled effect builder exists, in 0.07 seconds) (finished: run the VM test script, in 53.58 seconds) test script finished in 53.63s cleanup kill QemuMachine (pid 12) buildbot # qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13) (finished: cleanup, in 0.22 seconds)