Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.00 seconds) Test will time out and terminate in 3600 seconds run the VM test script additionally exposed symbols: buildbot, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh buildbot: waiting for unit sshd.service buildbot: waiting for the VM to finish booting buildbot: starting vm buildbot: QEMU running (pid 12) buildbot # Disk image does not exist, creating the virtualisation disk image... buildbot # Formatting '/build/vm-state-buildbot/tmp.pjgM6s6CC8', fmt=raw size=1073741824 buildbot # mke2fs 1.47.4 (6-Mar-2025) buildbot # Discarding device blocks: 0/262144 done buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes buildbot # Filesystem UUID: fb10fbf6-ea3d-43ed-81c6-f87945d3555a buildbot # Superblock backups stored on blocks: buildbot # 32768, 98304, 163840, 229376 buildbot # buildbot # Allocating group tables: 0/8 done buildbot # Writing inode tables: 0/8 done buildbot # Creating journal (8192 blocks): done buildbot # Writing superblocks and filesystem accounting information: 0/8 done buildbot # buildbot # Virtualisation disk image created. buildbot # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0xc00fac40] buildbot # [ 0.000000] Linux version 6.18.37 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT Sat Jun 27 10:06:50 UTC 2026 buildbot # [ 0.000000] KASLR enabled buildbot # [ 0.000000] random: crng init done buildbot # [ 0.000000] Machine model: linux,dummy-virt buildbot # [ 0.000000] efi: UEFI not found. buildbot # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT buildbot # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] NODE_DATA(0) allocated [mem 0x7fded740-0x7fdf0ebf] buildbot # [ 0.000000] Zone ranges: buildbot # [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] DMA32 empty buildbot # [ 0.000000] Normal empty buildbot # [ 0.000000] Device empty buildbot # [ 0.000000] Movable zone start for each node buildbot # [ 0.000000] Early memory node ranges buildbot # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc00000 buildbot # [ 0.000000] psci: probing for conduit method from DT. buildbot # [ 0.000000] psci: PSCIv1.3 detected in firmware. buildbot # [ 0.000000] psci: Using standard PSCI v0.2 function IDs buildbot # [ 0.000000] psci: Trusted OS migration not required buildbot # [ 0.000000] psci: SMC Calling Convention v1.1 buildbot # [ 0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003) buildbot # [ 0.000000] percpu: Embedded 76 pages/cpu s186392 r8192 d116712 u311296 buildbot # [ 0.000000] Detected PIPT I-cache on CPU0 buildbot # [ 0.000000] CPU features: detected: Address authentication (architected QARMA5 algorithm) buildbot # [ 0.000000] CPU features: detected: GICv3 CPU interface buildbot # [ 0.000000] CPU features: detected: Spectre-v4 buildbot # [ 0.000000] CPU features: detected: Spectre-BHB buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC03_CPU_38 buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC04_CPU_23 buildbot # [ 0.000000] alternatives: applying boot alternatives buildbot # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/g1fl9c1pxnqvhw34wpd7y3584lzmdbk5-nixos-system-buildbot-test/init regInfo=/nix/store/6nxidi4gn6cx80ybh4g0qwf0lmzzyvx1-closure-info/registration console=ttyAMA0,115200n8 console=tty0 buildbot # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/6nxidi4gn6cx80ybh4g0qwf0lmzzyvx1-closure-info/registration", will be passed to user space. buildbot # [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes buildbot # [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) buildbot # [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) buildbot # [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB buildbot # [ 0.000000] software IO TLB: area num 1. buildbot # [ 0.000000] software IO TLB: mapped [mem 0x000000007ca80000-0x000000007cb80000] (1MB) buildbot # [ 0.000000] Fallback order for Node 0: 0 buildbot # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 buildbot # [ 0.000000] Policy zone: DMA buildbot # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off buildbot # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 buildbot # [ 0.000000] allocated 2097152 bytes of page_ext buildbot # [ 0.000000] ftrace: allocating 74702 entries in 292 pages buildbot # [ 0.000000] ftrace: allocated 292 pages with 3 groups buildbot # [ 0.000000] rcu: Hierarchical RCU implementation. buildbot # [ 0.000000] rcu: RCU event tracing is enabled. buildbot # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. buildbot # [ 0.000000] Trampoline variant of Tasks RCU enabled. buildbot # [ 0.000000] Rude variant of Tasks RCU enabled. buildbot # [ 0.000000] Tracing variant of Tasks RCU enabled. buildbot # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. buildbot # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 buildbot # [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 buildbot # [ 0.000000] GICv3: 256 SPIs implemented buildbot # [ 0.000000] GICv3: 0 Extended SPIs implemented buildbot # [ 0.000000] Root IRQ handler: gic_handle_irq buildbot # [ 0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI buildbot # [ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=0 buildbot # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 buildbot # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @44ce0000 (indirect, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @44cf0000 (flat, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] GICv3: using LPI property table @0x0000000044d00000 buildbot # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000044d10000 buildbot # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. buildbot # [ 0.000000] arch_timer: cp15 timer running at 1000.00MHz (virt). buildbot # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns buildbot # [ 0.000000] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns buildbot # [ 0.000027] arm-pv: using stolen time PV buildbot # [ 0.000369] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) buildbot # [ 0.000527] Console: colour dummy device 80x25 buildbot # [ 0.000535] printk: legacy console [tty0] enabled buildbot # [ 0.000716] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) buildbot # [ 0.000722] pid_max: default: 32768 minimum: 301 buildbot # [ 0.000801] LSM: initializing lsm=capability,landlock,yama,bpf,ima buildbot # [ 0.000935] landlock: Up and running. buildbot # [ 0.000938] Yama: becoming mindful. buildbot # [ 0.001355] LSM support for eBPF active buildbot # [ 0.001442] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.001461] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.002496] cacheinfo: Unable to detect cache hierarchy for CPU 0 buildbot # [ 0.003183] rcu: Hierarchical SRCU implementation. buildbot # [ 0.003187] rcu: Max phase no-delay instances is 1000. buildbot # [ 0.004341] fsl-mc MSI: its@8080000 domain created buildbot # [ 0.004426] EFI services will not be available. buildbot # [ 0.004500] smp: Bringing up secondary CPUs ... buildbot # [ 0.004507] smp: Brought up 1 node, 1 CPU buildbot # [ 0.004510] SMP: Total of 1 processors activated. buildbot # [ 0.004513] CPU: All CPU(s) started at EL1 buildbot # [ 0.004522] CPU features: detected: Branch Target Identification buildbot # [ 0.004526] CPU features: detected: ARMv8.4 Translation Table Level buildbot # [ 0.004531] CPU features: detected: Instruction cache invalidation not required for I/D coherence buildbot # [ 0.004535] CPU features: detected: Data cache clean to the PoU not required for I/D coherence buildbot # [ 0.004538] CPU features: detected: Common not Private translations buildbot # [ 0.004542] CPU features: detected: CRC32 instructions buildbot # [ 0.004544] CPU features: detected: Data cache clean to Point of Deep Persistence buildbot # [ 0.004548] CPU features: detected: Data cache clean to Point of Persistence buildbot # [ 0.004551] CPU features: detected: Data independent timing control (DIT) buildbot # [ 0.004554] CPU features: detected: E0PD buildbot # [ 0.004557] CPU features: detected: Enhanced Counter Virtualization buildbot # [ 0.004560] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) buildbot # [ 0.004563] CPU features: detected: Enhanced Virtualization Traps buildbot # [ 0.004566] CPU features: detected: Fine Grained Traps buildbot # [ 0.004570] CPU features: detected: Generic authentication (architected QARMA5 algorithm) buildbot # [ 0.004574] CPU features: detected: RCpc load-acquire (LDAPR) buildbot # [ 0.004577] CPU features: detected: LSE atomic instructions buildbot # [ 0.004580] CPU features: detected: Privileged Access Never buildbot # [ 0.004583] CPU features: detected: PMUv3 buildbot # [ 0.004585] CPU features: detected: RAS Extension Support buildbot # [ 0.004588] CPU features: detected: RASv1p1 Extension Support buildbot # [ 0.004591] CPU features: detected: Random Number Generator buildbot # [ 0.004593] CPU features: detected: Speculation barrier (SB) buildbot # [ 0.004596] CPU features: detected: Stage-2 Force Write-Back buildbot # [ 0.004599] CPU features: detected: TLB range maintenance instructions buildbot # [ 0.004603] CPU features: detected: Speculative Store Bypassing Safe (SSBS) buildbot # [ 0.004639] alternatives: applying system-wide alternatives buildbot # [ 0.007364] CPU features: detected: BBM Level 2 without TLB conflict abort buildbot # [ 0.007539] Memory: 895060K/1048576K available (24384K kernel code, 7086K rwdata, 26324K rodata, 4736K init, 1102K bss, 112248K reserved, 32768K cma-reserved) buildbot # [ 0.007868] devtmpfs: initialized buildbot # [ 0.009534] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns buildbot # [ 0.009556] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.009577] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). buildbot # [ 0.009730] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL buildbot # [ 0.009735] 0 pages in range for non-PLT usage buildbot # [ 0.009736] 508320 pages in range for PLT usage buildbot # [ 0.009830] pinctrl core: initialized pinctrl subsystem buildbot # [ 0.010588] DMI not present or invalid. buildbot # [ 0.013779] NET: Registered PF_NETLINK/PF_ROUTE protocol family buildbot # [ 0.015887] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations buildbot # [ 0.016035] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations buildbot # [ 0.016209] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations buildbot # [ 0.016227] audit: initializing netlink subsys (disabled) buildbot # [ 0.016793] thermal_sys: Registered thermal governor 'fair_share' buildbot # [ 0.016795] thermal_sys: Registered thermal governor 'bang_bang' buildbot # [ 0.016798] thermal_sys: Registered thermal governor 'step_wise' buildbot # [ 0.016801] thermal_sys: Registered thermal governor 'user_space' buildbot # [ 0.016804] thermal_sys: Registered thermal governor 'power_allocator' buildbot # [ 0.016828] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1 buildbot # [ 0.016839] cpuidle: using governor ladder buildbot # [ 0.016845] cpuidle: using governor menu buildbot # [ 0.017027] hw-breakpoint: found 16 breakpoint and 4 watchpoint registers. buildbot # [ 0.017042] ASID allocator initialised with 65536 entries buildbot # [ 0.018141] Serial: AMBA PL011 UART driver buildbot # [ 0.023189] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 buildbot # [ 0.023304] printk: console [ttyAMA0] enabled buildbot # [ 0.150139] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages buildbot # [ 0.150157] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page buildbot # [ 0.150163] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages buildbot # [ 0.150168] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page buildbot # [ 0.150172] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages buildbot # [ 0.150176] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page buildbot # [ 0.150180] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages buildbot # [ 0.150184] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page buildbot # [ 0.157767] fbcon: Taking over console buildbot # [ 0.157782] ACPI: Interpreter disabled. buildbot # [ 0.159678] iommu: Default domain type: Translated buildbot # [ 0.159688] iommu: DMA domain TLB invalidation policy: strict mode buildbot # [ 0.161425] SCSI subsystem initialized buildbot # [ 0.166666] usbcore: registered new interface driver usbfs buildbot # [ 0.166698] usbcore: registered new interface driver hub buildbot # [ 0.166716] usbcore: registered new device driver usb buildbot # [ 0.166979] pps_core: LinuxPPS API ver. 1 registered buildbot # [ 0.166986] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti buildbot # [ 0.167003] PTP clock support registered buildbot # [ 0.167064] EDAC MC: Ver: 3.0.0 buildbot # [ 0.171866] scmi_core: SCMI protocol bus registered buildbot # [ 0.172856] FPGA manager framework buildbot # [ 0.173818] vgaarb: loaded buildbot # [ 0.174437] clocksource: Switched to clocksource arch_sys_counter buildbot # [ 0.174888] VFS: Disk quotas dquot_6.6.0 buildbot # [ 0.174926] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) buildbot # [ 0.177360] netfs: FS-Cache loaded buildbot # [ 0.177468] pnp: PnP ACPI: disabled buildbot # [ 0.186021] NET: Registered PF_INET protocol family buildbot # [ 0.186176] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) buildbot # [ 0.214058] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.214093] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) buildbot # [ 0.214115] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) buildbot # [ 0.214158] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) buildbot # [ 0.214234] TCP: Hash tables configured (established 8192 bind 8192) buildbot # [ 0.214330] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) buildbot # [ 0.214387] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.214433] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.221670] NET: Registered PF_UNIX/PF_LOCAL protocol family buildbot # [ 0.221694] NET: Registered PF_XDP protocol family buildbot # [ 0.221711] PCI: CLS 0 bytes, default 64 buildbot # [ 0.223750] Trying to unpack rootfs image as initramfs... buildbot # [ 0.231148] kvm [1]: HYP mode not available buildbot # [ 0.315309] Initialise system trusted keyrings buildbot # [ 0.316164] workingset: timestamp_bits=42 max_order=18 bucket_order=0 buildbot # [ 0.317387] squashfs: version 4.0 (2009/01/31) Phillip Lougher buildbot # [ 0.318158] 9p: Installing v9fs 9p2000 file system support buildbot # [ 0.346800] Key type asymmetric registered buildbot # [ 0.346816] Asymmetric key parser 'x509' registered buildbot # [ 0.346882] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) buildbot # [ 0.349019] io scheduler mq-deadline registered buildbot # [ 0.349030] io scheduler kyber registered buildbot # [ 0.358551] pl061_gpio 9030000.pl061: PL061 GPIO chip registered buildbot # [ 0.359913] ledtrig-cpu: registered to indicate activity on CPUs buildbot # [ 0.360273] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: buildbot # [ 0.360290] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 buildbot # [ 0.360305] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 buildbot # [ 0.360313] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 buildbot # [ 0.360334] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits buildbot # [ 0.360356] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] buildbot # [ 0.360422] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 buildbot # [ 0.360432] pci_bus 0000:00: root bus resource [bus 00-ff] buildbot # [ 0.360438] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] buildbot # [ 0.360443] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] buildbot # [ 0.360449] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] buildbot # [ 0.360502] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint buildbot # [ 0.360935] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.361121] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.361138] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.361167] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.361184] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.361639] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.361822] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.361838] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.361867] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.362336] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.383124] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.383151] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.383181] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.383703] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.383888] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.383904] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.383935] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.384400] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.384584] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.384600] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.384630] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.385085] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint buildbot # [ 0.385268] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] buildbot # [ 0.385284] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.385314] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.385770] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.385954] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.385970] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.386000] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.386017] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.406582] pci 0000:00:08.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint buildbot # [ 0.406791] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.406823] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.407357] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint buildbot # [ 0.407544] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.407574] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.407976] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint buildbot # [ 0.408157] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] buildbot # [ 0.408406] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint buildbot # [ 0.408684] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.408702] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.408732] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.409192] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.409374] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.409390] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.409420] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.410026] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned buildbot # [ 0.410038] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned buildbot # [ 0.410044] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned buildbot # [ 0.410089] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned buildbot # [ 0.410136] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned buildbot # [ 0.410183] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned buildbot # [ 0.410231] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned buildbot # [ 0.410278] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned buildbot # [ 0.410326] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned buildbot # [ 0.410375] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned buildbot # [ 0.410421] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned buildbot # [ 0.438520] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned buildbot # [ 0.438619] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned buildbot # [ 0.438668] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned buildbot # [ 0.438690] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned buildbot # [ 0.438712] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned buildbot # [ 0.438735] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned buildbot # [ 0.438758] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned buildbot # [ 0.438780] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned buildbot # [ 0.438806] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned buildbot # [ 0.438829] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned buildbot # [ 0.438863] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned buildbot # [ 0.438885] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned buildbot # [ 0.438908] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned buildbot # [ 0.438931] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned buildbot # [ 0.438953] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned buildbot # [ 0.438975] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned buildbot # [ 0.438997] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned buildbot # [ 0.439019] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned buildbot # [ 0.439040] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned buildbot # [ 0.439062] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned buildbot # [ 0.439084] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned buildbot # [ 0.439106] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned buildbot # [ 0.439129] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned buildbot # [ 0.439159] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] buildbot # [ 0.439169] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] buildbot # [ 0.439173] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] buildbot # [ 0.440337] pci 0000:00:0a.0: enabling device (0000 -> 0002) buildbot # [ 0.488571] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) buildbot # [ 0.494609] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) buildbot # [ 0.496828] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) buildbot # [ 0.506645] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) buildbot # [ 0.508577] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) buildbot # [ 0.510424] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) buildbot # [ 0.520533] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) buildbot # [ 0.530622] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) buildbot # [ 0.534240] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) buildbot # [ 0.536001] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) buildbot # [ 0.538068] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) buildbot # [ 0.555701] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled buildbot # [ 0.558213] msm_serial: driver initialized buildbot # [ 0.558344] SuperH (H)SCI(F) driver initialized buildbot # [ 0.558396] STM32 USART driver initialized buildbot # [ 0.591112] loop: module loaded buildbot # [ 0.591273] virtio_blk virtio5: 1/0/0 default/read/poll queues buildbot # [ 0.592005] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) buildbot # [ 0.599032] megasas: 07.734.00.00-rc1 buildbot # [ 0.599669] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] buildbot # [ 0.604438] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.604461] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.605888] Using buffer write method buildbot # [ 0.605942] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] buildbot # [ 0.623477] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.623506] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.625106] Using buffer write method buildbot # [ 0.625132] Concatenating MTD devices: buildbot # [ 0.625136] (0): "0.flash" buildbot # [ 0.625140] (1): "0.flash" buildbot # [ 0.625143] into device "0.flash" buildbot # [ 0.835562] Freeing initrd memory: 25520K buildbot # [ 0.841474] tun: Universal TUN/TAP device driver, 1.6 buildbot # [ 0.845054] thunder_xcv, ver 1.0 buildbot # [ 0.845094] thunder_bgx, ver 1.0 buildbot # [ 0.845117] nicpf, ver 1.0 buildbot # [ 0.845656] e1000: Intel(R) PRO/1000 Network Driver buildbot # [ 0.845664] e1000: Copyright (c) 1999-2006 Intel Corporation. buildbot # [ 0.845691] e1000e: Intel(R) PRO/1000 Network Driver buildbot # [ 0.845699] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. buildbot # [ 0.845730] igb: Intel(R) Gigabit Ethernet Network Driver buildbot # [ 0.845736] igb: Copyright (c) 2007-2014 Intel Corporation. buildbot # [ 0.845762] igbvf: Intel(R) Gigabit Virtual Function Network Driver buildbot # [ 0.845769] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. buildbot # [ 0.845899] sky2: driver version 1.30 buildbot # [ 0.855062] ehci-pci 0000:00:0a.0: EHCI Host Controller buildbot # [ 0.855091] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 buildbot # [ 0.855251] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 buildbot # [ 0.858066] usbcore: registered new interface driver usb-storage buildbot # [ 0.858156] usbcore: registered new interface driver usbserial_generic buildbot # [ 0.858170] usbserial: USB Serial support registered for generic buildbot # [ 0.861113] hv_vmbus: registering driver hyperv_keyboard buildbot # [ 0.862653] rtc-pl031 9010000.pl031: registered as rtc0 buildbot # [ 0.862679] rtc-pl031 9010000.pl031: setting system clock to 2026-07-05T06:00:45 UTC (1783231245) buildbot # [ 0.862986] i2c_dev: i2c /dev entries driver buildbot # [ 0.868133] sdhci: Secure Digital Host Controller Interface driver buildbot # [ 0.868145] sdhci: Copyright(c) Pierre Ossman buildbot # [ 0.868402] Synopsys Designware Multimedia Card Interface Driver buildbot # [ 0.868767] sdhci-pltfm: SDHCI platform and OF driver helper buildbot # [ 0.870375] hid: raw HID events driver (C) Jiri Kosina buildbot # [ 0.870481] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 buildbot # [ 0.870806] hub 1-0:1.0: USB hub found buildbot # [ 0.870849] hub 1-0:1.0: 6 ports detected buildbot # [ 0.876864] usbcore: registered new interface driver usbhid buildbot # [ 0.876881] usbhid: USB HID core driver buildbot # [ 0.879296] hw perfevents: enabled with armv8_pmuv3 PMU driver, 11 (0,800003ff) counters available buildbot # [ 0.880787] drop_monitor: Initializing network drop monitor service buildbot # [ 0.880958] NET: Registered PF_INET6 protocol family buildbot # [ 0.884090] Segment Routing with IPv6 buildbot # [ 0.884110] In-situ OAM (IOAM) with IPv6 buildbot # [ 0.884141] NET: Registered PF_PACKET protocol family buildbot # [ 0.885815] 9pnet: Installing 9P2000 support buildbot # [ 0.888518] Key type dns_resolver registered buildbot # [ 0.895129] registered taskstats version 1 buildbot # [ 0.895280] Loading compiled-in X.509 certificates buildbot # [ 0.903534] Demotion targets for Node 0: null buildbot # [ 0.903631] Key type .fscrypt registered buildbot # [ 0.903638] Key type fscrypt-provisioning registered buildbot # [ 0.903723] ima: No TPM chip found, activating TPM-bypass! buildbot # [ 0.903742] ima: Allocated hash algorithm: sha1 buildbot # [ 0.903764] ima: No architecture policies found buildbot # [ 0.907825] input: gpio-keys as /devices/platform/gpio-keys/input/input0 buildbot # [ 0.925233] clk: Disabling unused clocks buildbot # [ 0.925251] PM: genpd: Disabling unused power domains buildbot # [ 0.929555] Freeing unused kernel memory: 4736K buildbot # [ 0.929743] Run /init as init process buildbot # [ 0.944653] systemd[1]: Successfully made /usr/ read-only. buildbot # [ 1.118516] usb 1-1: new high-speed USB device number 2 using ehci-pci buildbot # [ 1.270658] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 buildbot # [ 1.279552] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 1.292307] systemd[1]: Detected virtualization qemu. buildbot # [ 1.292399] systemd[1]: Detected architecture arm64. buildbot # [ 1.292424] systemd[1]: Running in initrd. buildbot # [ 1.293435] systemd[1]: Initializing machine ID from random generator. buildbot # [ 1.293705] systemd[1]: Hostname set to . buildbot # [ 1.358776] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 buildbot # [ 1.417757] systemd[1]: Queued start job for default target Initrd Default Target. buildbot # [ 1.428749] systemd[1]: Created slice Slice /system/modprobe. buildbot # [ 1.429902] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 1.431281] systemd[1]: Expecting device /dev/disk/by-label/nixos... buildbot # [ 1.432328] systemd[1]: Reached target Path Units. buildbot # [ 1.433127] systemd[1]: Reached target Slice Units. buildbot # [ 1.433945] systemd[1]: Reached target Swaps. buildbot # [ 1.434713] systemd[1]: Reached target Timer Units. buildbot # [ 1.435672] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 1.436887] systemd[1]: Listening on Journal Socket (/dev/log). buildbot # [ 1.438025] systemd[1]: Listening on Journal Sockets. buildbot # [ 1.439177] systemd[1]: Listening on udev Control Socket. buildbot # [ 1.439286] systemd[1]: Listening on udev Kernel Socket. buildbot # [ 1.439307] systemd[1]: Reached target Socket Units. buildbot # [ 1.443153] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 1.450589] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 1.451683] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 1.458613] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 1.469234] systemd[1]: Starting Journal Service... buildbot # [ 1.482897] usb 1-2: new high-speed USB device number 3 using ehci-pci buildbot # [ 1.486773] systemd[1]: Starting Load Kernel Modules... buildbot # [ 1.487645] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 1.502597] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 1.514606] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 1.515625] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 1.515885] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 1.516091] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 1.530656] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 1.547007] systemd-journald[73]: Collecting audit messages is disabled. buildbot # [ 1.556551] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. buildbot # [ 1.562967] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 1.566735] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 1.574594] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev buildbot # [ 1.578898] [drm] pci: virtio-gpu-pci detected at 0000:00:08.0 buildbot # [ 1.579126] [drm] features: -virgl +edid -resource_blob -host_visible buildbot # [ 1.579136] [drm] features: -context_init buildbot # [ 1.579811] [drm] number of scanouts: 1 buildbot # [ 1.579829] [drm] number of cap sets: 0 buildbot # [ 1.599066] virtio-pci 0000:00:08.0: [drm] Registered 1 planes with drm panic buildbot # [ 1.599084] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:08.0 on minor 0 buildbot # [ 1.622979] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 1.623119] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 1.623142] systemd[1]: Reached target Local File Systems. buildbot # [ 1.630752] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 1.635386] Console: switching to colour frame buffer device 160x50 buildbot # [ 1.641771] virtio-pci 0000:00:08.0: [drm] fb0: virtio_gpudrmfb frame buffer device buildbot # [ 1.657579] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 buildbot # [ 1.662617] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 buildbot # [ 1.671125] systemd[1]: Finished Load Kernel Modules. buildbot # [ 1.682845] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 1.711076] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 1.744821] systemd[1]: Started Journal Service. buildbot # [ 1.732266] systemd-modules-load[74]: Inserted module 'dm_mod' buildbot # [ 1.733494] systemd-modules-load[74]: Module 'virtio_balloon' is built in buildbot # [ 1.736688] systemd-modules-load[74]: Module 'virtio_console' is built in buildbot # [ 1.739097] systemd-modules-load[74]: Inserted module 'virtio_gpu' buildbot # [ 1.748268] systemd-modules-load[74]: Module 'virtio_rng' is built in buildbot # [ 1.750967] systemd-udevd[80]: Using default interface naming scheme 'v260'. buildbot # [ 1.756693] systemd[1]: Starting Create System Files and Directories... buildbot # [ 1.768990] systemd[1]: Finished Create System Files and Directories. buildbot # [ 1.778544] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 1.848115] systemd[1]: Starting Virtual Console Setup... buildbot # [ 1.916703] systemd-vconsole-setup[103]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 1.919700] systemd[1]: Finished Virtual Console Setup. buildbot # [ 2.659217] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 2.660195] systemd[1]: Reached target System Initialization. buildbot # [ 2.661030] systemd[1]: Reached target Basic System. buildbot # [ 2.791922] (udev-worker)[94]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 2.834608] (udev-worker)[94]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.849148] (udev-worker)[101]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.884419] systemd[1]: Found device /dev/disk/by-label/nixos. buildbot # [ 2.886887] systemd[1]: Reached target Initrd Root Device. buildbot # [ 2.892153] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... buildbot # [ 2.933566] systemd-fsck[112]: nixos: clean, 12/65536 files, 13019/262144 blocks buildbot # [ 2.940117] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. buildbot # [ 2.944202] systemd[1]: Mounting /sysroot... buildbot # [ 3.014772] EXT4-fs (vda): mounted filesystem fb10fbf6-ea3d-43ed-81c6-f87945d3555a r/w with ordered data mode. Quota mode: none. buildbot # [ 2.997324] systemd[1]: Mounted /sysroot. buildbot # [ 3.001706] systemd[1]: Reached target Initrd Root File System. buildbot # [ 3.007621] systemd[1]: Mounting /sysroot/nix/.ro-store... buildbot # [ 3.023805] systemd[1]: Mounting /sysroot/nix/.rw-store... buildbot # [ 3.026146] systemd[1]: Mounting /sysroot/run... buildbot # [ 3.038985] systemd[1]: Mounting /sysroot/tmp/shared... buildbot # [ 3.061346] systemd[1]: Mounting /sysroot/tmp/xchg... buildbot # [ 3.081755] systemd[1]: Starting Mountpoints Configured in the Real Root... buildbot # [ 3.082797] systemd[1]: Mounted /sysroot/nix/.rw-store. buildbot # [ 3.101933] systemd[1]: Mounted /sysroot/run. buildbot # [ 3.109403] systemd[1]: Mounted /sysroot/nix/.ro-store. buildbot # [ 3.124833] systemd[1]: Mounted /sysroot/tmp/shared. buildbot # [ 3.127392] systemd-sysroot-fstab-check[125]: /sysroot should be mounted in the initrd, will request daemon-reload. buildbot # [ 3.142462] systemd[1]: Reload requested from client PID 125 ('systemd-sysroot') (unit initrd-parse-etc.service)... buildbot # [ 3.145637] systemd[1]: Reloading... buildbot # [ 3.357331] systemd[1]: Reloading finished in 214 ms. buildbot # [ 3.379292] systemd-sysroot-fstab-check[125]: Requesting initrd-fs.target/start/replace... buildbot # [ 3.384160] systemd[1]: Mounted /sysroot/tmp/xchg. buildbot # [ 3.387524] systemd-sysroot-fstab-check[125]: Requesting swap.target/start/replace... buildbot # [ 3.401634] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.404566] systemd[1]: initrd-parse-etc.service: Deactivated successfully. buildbot # [ 3.409020] systemd[1]: Finished Mountpoints Configured in the Real Root. buildbot # [ 3.412208] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. buildbot # [ 3.422558] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.423652] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 3.486206] systemd[1]: Mounting /sysroot/nix/store... buildbot # [ 3.522575] systemd[1]: Mounted /sysroot/nix/store. buildbot # [ 3.523372] systemd[1]: Reached target Initrd File Systems. buildbot # [ 3.524574] systemd[1]: Starting Find NixOS closure... buildbot # [ 3.535773] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... buildbot # [ 3.566344] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. buildbot # [ 3.567881] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. buildbot # [ 3.586439] systemd[1]: Finished Find NixOS closure. buildbot # [ 3.588227] systemd[1]: Reached target Initrd Default Target. buildbot # [ 3.594310] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... buildbot # [ 3.621451] systemd[1]: Stopped target Initrd Default Target. buildbot # [ 3.624310] systemd[1]: Stopped target Basic System. buildbot # [ 3.628773] systemd[1]: Stopped target Initrd Root Device. buildbot # [ 3.629894] systemd[1]: Stopped target Path Units. buildbot # [ 3.631751] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. buildbot # [ 3.635028] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. buildbot # [ 3.640221] systemd[1]: Stopped target Slice Units. buildbot # [ 3.642188] systemd[1]: Stopped target Socket Units. buildbot # [ 3.644098] systemd[1]: Stopped target System Initialization. buildbot # [ 3.649327] systemd[1]: Stopped target Swaps. buildbot # [ 3.650036] systemd[1]: Stopped target Timer Units. buildbot # [ 3.651545] systemd[1]: dbus.socket: Deactivated successfully. buildbot # [ 3.653580] systemd[1]: Closed D-Bus System Message Bus Socket. buildbot # [ 3.656596] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. buildbot # [ 3.662027] systemd[1]: Stopped Find NixOS closure. buildbot # [ 3.663792] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 3.673246] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.674160] systemd[1]: systemd-sysctl.service: Deactivated successfully. buildbot # [ 3.675212] systemd[1]: Stopped Apply Kernel Variables. buildbot # [ 3.679644] systemd[1]: systemd-modules-load.service: Deactivated successfully. buildbot # [ 3.683612] systemd[1]: Stopped Load Kernel Modules. buildbot # [ 3.686634] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. buildbot # [ 3.694263] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. buildbot # [ 3.700328] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. buildbot # [ 3.702117] systemd[1]: Stopped Create System Files and Directories. buildbot # [ 3.703774] systemd[1]: Stopped target Local File Systems. buildbot # [ 3.708227] systemd[1]: Stopped target Preparation for Local File Systems. buildbot # [ 3.709233] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. buildbot # [ 3.710241] systemd[1]: Stopped Coldplug All udev Devices. buildbot # [ 3.711023] systemd[1]: Stopping Rule-based Manager for Device Events and Files... buildbot # [ 3.716451] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 3.717510] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 3.718243] systemd[1]: initrd-cleanup.service: Deactivated successfully. buildbot # [ 3.719184] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. buildbot # [ 3.721335] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 3.722387] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 3.723253] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.724390] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 3.736179] systemd[1]: systemd-udevd.service: Deactivated successfully. buildbot # [ 3.737219] systemd[1]: Stopped Rule-based Manager for Device Events and Files. buildbot # [ 3.738239] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. buildbot # [ 3.739251] systemd[1]: Closed udev Control Socket. buildbot # [ 3.739954] systemd[1]: Starting Cleanup udev Database... buildbot # [ 3.741511] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. buildbot # [ 3.742767] systemd[1]: Stopped Create Static Device Nodes in /dev. buildbot # [ 3.743638] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. buildbot # [ 3.747293] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. buildbot # [ 3.748542] systemd[1]: kmod-static-nodes.service: Deactivated successfully. buildbot # [ 3.752285] systemd[1]: Stopped Create List of Static Device Nodes. buildbot # [ 3.769844] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. buildbot # [ 3.772478] systemd[1]: Finished Cleanup udev Database. buildbot # [ 3.773280] systemd[1]: Reached target Switch Root. buildbot # [ 3.776717] systemd[1]: Starting NixOS Activation... buildbot # [ 3.936894] initrd-nixos-activation-start[171]: booting system configuration /nix/store/g1fl9c1pxnqvhw34wpd7y3584lzmdbk5-nixos-system-buildbot-test buildbot # [ 3.999084] initrd-nixos-activation-start[171]: running activation script... buildbot # [ 4.408241] initrd-nixos-activation-start[194]: setting up /etc... buildbot # [ 4.672049] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. buildbot # [ 4.674894] systemd[1]: Finished NixOS Activation. buildbot # [ 4.680598] systemd[1]: Starting Switch Root... buildbot # [ 4.697958] systemd[1]: Switching root. buildbot # [ 4.755263] systemd-journald[73]: Received SIGTERM from PID 1 (systemd). buildbot # [ 5.308914] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 5.321351] systemd[1]: Detected virtualization qemu. buildbot # [ 5.324270] systemd[1]: Detected architecture arm64. buildbot # [ 5.328103] systemd[1]: Detected first boot. buildbot # [ 5.334314] systemd[1]: Initializing machine ID from random generator. buildbot # [ 5.647305] systemd[1]: bpf-restrict-fs: LSM BPF program attached buildbot # [ 5.846238] NET: Registered PF_VSOCK protocol family buildbot # [ 5.852840] Guest personality initialized and is inactive buildbot # [ 5.854569] VMCI host device registered (name=vmci, major=10, minor=261) buildbot # [ 5.854594] Initialized host personality buildbot # [ 5.915036] systemd[1]: Applying preset policy. buildbot # [ 6.439127] systemd[1]: Populated /etc with preset unit settings. buildbot # [ 6.948080] systemd[1]: initrd-switch-root.service: Deactivated successfully. buildbot # [ 6.949370] systemd[1]: Stopped initrd-switch-root.service. buildbot # [ 6.952321] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. buildbot # [ 6.955604] systemd[1]: Created slice Slice /system/getty. buildbot # [ 6.958175] systemd[1]: Created slice User and Session Slice. buildbot # [ 6.960158] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 6.962333] systemd[1]: Started Forward Password Requests to Wall Directory Watch. buildbot # [ 6.964497] systemd[1]: Expecting device /dev/hvc0... buildbot # [ 6.966221] systemd[1]: Expecting device /dev/ttyAMA0... buildbot # [ 6.968038] systemd[1]: Reached target Local Encrypted Volumes. buildbot # [ 6.969873] systemd[1]: Stopped target initrd-fs.target. buildbot # [ 6.971773] systemd[1]: Stopped target initrd-root-fs.target. buildbot # [ 6.972880] systemd[1]: Stopped target initrd-switch-root.target. buildbot # [ 6.974390] systemd[1]: Reached target Virtual Machines and Containers. buildbot # [ 6.976008] systemd[1]: Reached target Path Units. buildbot # [ 6.977985] systemd[1]: Reached target Remote File Systems. buildbot # [ 6.979157] systemd[1]: Reached target Slice Units. buildbot # [ 6.981155] systemd[1]: Reached target Swaps. buildbot # [ 6.984764] systemd[1]: Listening on Query the User Interactively for a Password. buildbot # [ 6.989250] systemd[1]: Listening on Process Core Dump Socket. buildbot # [ 6.992958] systemd[1]: Listening on Credential Encryption/Decryption. buildbot # [ 6.996613] systemd[1]: Listening on Factory Reset Management. buildbot # [ 7.001536] systemd[1]: Starting Journal Log Access Socket... buildbot # [ 7.003534] systemd[1]: Listening on Journal Audit Socket. buildbot # [ 7.007614] systemd[1]: Listening on Console Output Muting Service Socket. buildbot # [ 7.009909] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. buildbot # [ 7.012329] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.014814] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.025540] systemd[1]: Listening on Disk Repartitioning Service Socket. buildbot # [ 7.027722] systemd[1]: Listening on udev Control Socket. buildbot # [ 7.029612] systemd[1]: Listening on udev Varlink Socket. buildbot # [ 7.034004] systemd[1]: Mounting Huge Pages File System... buildbot # [ 7.038945] systemd[1]: Mounting POSIX Message Queue File System... buildbot # [ 7.047332] systemd[1]: Mounting Kernel Debug File System... buildbot # [ 7.055261] systemd[1]: Mounting Kernel Trace File System... buildbot # [ 7.068220] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 7.079585] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 7.081574] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 7.094994] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 7.097227] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm buildbot # [ 7.100612] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore buildbot # [ 7.151173] systemd[1]: Starting Load Kernel Module fuse... buildbot # [ 7.155077] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 buildbot # [ 7.183239] systemd[1]: Starting Journal Service... buildbot # [ 7.203034] systemd[1]: Starting Load Kernel Modules... buildbot # [ 7.223189] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... buildbot # [ 7.236535] systemd[1]: Starting Remount Root and Kernel File Systems... buildbot # [ 7.242114] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.269270] fuse: init (API version 7.45) buildbot # [ 7.275779] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 7.278372] systemd[1]: Listening on Journal Log Access Socket. buildbot # [ 7.288517] systemd[1]: Mounted Huge Pages File System. buildbot # [ 7.294811] systemd-journald[266]: Collecting audit messages is enabled. buildbot # [ 7.310978] systemd[1]: Mounted POSIX Message Queue File System. buildbot # [ 7.291440] systemd[1]: Queued start job for default target Multi-User System. buildbot # [ 7.316794] systemd[1]: Started Journal Service. buildbot # [ 7.298092] systemd[1]: systemd-journald.service: Deactivated successfully. buildbot # [ 7.306767] systemd-modules-load[267]: Module 'atkbd' is built in buildbot # [ 7.307812] systemd-modules-load[267]: Module 'loop' is built in buildbot # [ 7.318759] systemd[1]: Mounted Kernel Debug File System. buildbot # [ 7.322673] systemd[1]: Mounted Kernel Trace File System. buildbot # [ 7.325795] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 7.336737] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 7.339940] systemd-modules-load[267]: Inserted module 'tls' buildbot # [ 7.342905] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 7.366893] EXT4-fs (vda): re-mounted fb10fbf6-ea3d-43ed-81c6-f87945d3555a. buildbot # [ 7.349988] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 7.354397] systemd[1]: modprobe@fuse.service: Deactivated successfully. buildbot # [ 7.361398] systemd[1]: Finished Load Kernel Module fuse. buildbot # [ 7.362219] systemd[1]: Finished Load Kernel Modules. buildbot # [ 7.362958] systemd[1]: Finished Remount Root and Kernel File Systems. buildbot # [ 7.367374] systemd[1]: Listening on Disk Image Download Service Socket. buildbot # [ 7.373221] systemd[1]: Mounting FUSE Control File System... buildbot # [ 7.377924] systemd[1]: Starting Flush Journal to Persistent Storage... buildbot # [ 7.380247] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore buildbot # [ 7.388605] systemd[1]: Starting Load/Save OS Random Seed... buildbot # [ 7.407212] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 7.408873] systemd-oomd[269]: No swap; memory pressure usage will be degraded buildbot # [ 7.438892] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 7.445398] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.454119] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. buildbot # [ 7.500756] systemd-journald[266]: Received client request to flush runtime journal. buildbot # [ 7.549559] systemd[1]: Mounted FUSE Control File System. buildbot # [ 7.555234] systemd[1]: Finished Load/Save OS Random Seed. buildbot # [ 7.560542] systemd[1]: Reached target First Boot Complete. buildbot # [ 7.561676] systemd[1]: Finished Flush Journal to Persistent Storage. buildbot # [ 7.581569] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 7.625040] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 7.628535] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 7.722104] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 7.723128] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 7.725523] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 7.938679] systemd[1]: Mounting /run/wrappers... buildbot # [ 7.993272] systemd[1]: Mounted /run/wrappers. buildbot # [ 7.994223] systemd[1]: Reached target Local File Systems. buildbot # [ 7.998709] systemd[1]: Listening on Boot Loader Control Service Socket. buildbot # [ 8.010294] systemd[1]: Starting register-nix-paths.service... buildbot # [ 8.013696] systemd[1]: Starting Create SUID/SGID Wrappers... buildbot # [ 8.020351] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. buildbot # [ 8.028084] systemd[1]: Starting Save Transient machine-id to Disk... buildbot # [ 8.038510] systemd[1]: Starting Create System Files and Directories... buildbot # [ 8.124834] systemd-udevd[300]: Using default interface naming scheme 'v260'. buildbot # [ 8.148257] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. buildbot # [ 8.159930] systemd[1]: Finished Save Transient machine-id to Disk. buildbot # [ 8.272837] systemd[1]: Finished Create System Files and Directories. buildbot # [ 8.287940] systemd[1]: Starting Rebuild Journal Catalog... buildbot # [ 8.291212] systemd[1]: Starting Record System Boot/Shutdown in UTMP... buildbot # [ 8.380101] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 8.428234] systemd[1]: Finished Record System Boot/Shutdown in UTMP. buildbot # [ 8.493400] systemd[1]: Finished Rebuild Journal Catalog. buildbot # [ 8.505424] systemd[1]: Starting Update is Completed... buildbot # [ 8.596800] systemd[1]: Finished Update is Completed. buildbot # [ 9.048108] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. buildbot # [ 9.052182] systemd[1]: Finished Create SUID/SGID Wrappers. buildbot # [ 9.325079] systemd[1]: Finished register-nix-paths.service. buildbot # [ 9.401343] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 9.402463] systemd[1]: Reached target System Initialization. buildbot # [ 9.403837] systemd[1]: Started Discard unused filesystem blocks once a week. buildbot # [ 9.406480] systemd[1]: Started Daily Cleanup of Temporary Directories. buildbot # [ 9.412375] systemd[1]: Reached target Timer Units. buildbot # [ 9.413150] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 9.414086] systemd[1]: Listening on Nix Daemon Socket. buildbot # [ 9.414864] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). buildbot # [ 9.420187] systemd[1]: Listening on Hostname Service Socket. buildbot # [ 9.421427] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. buildbot # [ 9.428445] systemd[1]: Reached target Socket Units. buildbot # [ 9.429656] systemd[1]: Reached target Basic System. buildbot # [ 9.432797] systemd[1]: Starting Import lastlog data into lastlog2 database... buildbot # [ 9.441041] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 9.444206] systemd[1]: Starting Post-Boot Actions... buildbot # [ 9.461599] systemd[1]: Started Reset console on configuration changes. buildbot # [ 9.481253] systemd[1]: Starting resolvconf update... buildbot # [ 9.487490] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met. buildbot # [ 9.526654] systemd[1]: Starting D-Bus System Message Bus... buildbot # [ 9.545628] systemd[1]: Finished Post-Boot Actions. buildbot # [ 9.571968] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 9.577282] nsncd[388]: Jul 05 06:00:54.233 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 9.586550] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 9.588859] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 9.603007] systemd[1]: Starting User Login Management... buildbot # [ 9.647506] systemd[1]: Finished Import lastlog data into lastlog2 database. buildbot # [ 9.745264] dbus-broker-launch[393]: Looking up NSS user entry for 'systemd-timesync'... buildbot # [ 9.759389] dbus-broker-launch[393]: NSS returned no entry for 'systemd-timesync' buildbot # [ 9.763921] dbus-broker-launch[393]: Invalid user-name in /nix/store/8p7z3c4d93hn28ypc5s2q26ly296a9yf-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" buildbot # [ 9.777414] systemd-logind[409]: New seat seat0. buildbot # [ 9.781317] systemd[1]: Started User Login Management. buildbot # [ 9.785526] systemd[1]: Starting linger-users.service... buildbot # [ 9.811128] systemd[1]: Started D-Bus System Message Bus. buildbot # [ 9.853593] dbus-broker-launch[393]: Ready buildbot # [ 9.857750] systemd[1]: linger-users.service: Deactivated successfully. buildbot # [ 9.861488] systemd[1]: Finished linger-users.service. buildbot # [ 9.869263] systemd[1]: Stopped target Host and Network Name Lookups. buildbot # [ 9.873095] systemd[1]: Stopping Host and Network Name Lookups... buildbot # [ 9.878358] systemd[1]: Stopped target User and Group Name Lookups. buildbot # [ 9.882240] systemd[1]: Stopping User and Group Name Lookups... buildbot # [ 9.883122] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... buildbot # [ 9.888699] systemd[1]: nscd.service: Deactivated successfully. buildbot # [ 9.893590] systemd[1]: Stopped Name Service Cache Daemon (nsncd). buildbot # [ 9.900310] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 9.938909] systemd[1]: Finished resolvconf update. buildbot # [ 9.943568] systemd[1]: Reached target Preparation for Network. buildbot # [ 9.953488] systemd[1]: Starting DHCP Client... buildbot # [ 9.958924] systemd[1]: Starting Extra networking commands.... buildbot # [ 9.984241] nsncd[462]: Jul 05 06:00:54.643 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 9.991764] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 9.996807] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 10.001583] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 10.195381] dhcpcd[484]: dhcpcd-10.3.2 starting buildbot # [ 10.211127] dhcpcd[518]: dev: loaded udev buildbot # [ 10.218336] dhcpcd[518]: no valid interfaces found buildbot # [ 10.221451] dhcpcd[518]: libudev: received NULL device buildbot # [ 10.223142] dhcpcd[518]: no valid interfaces found buildbot # [ 10.225649] dhcpcd[518]: libudev: received NULL device buildbot # [ 10.247139] systemd[1]: Finished Extra networking commands.. buildbot # [ 10.249663] systemd[1]: Reached target Network. buildbot # [ 10.256650] systemd[1]: Starting Nginx Web Server... buildbot # [ 10.263839] systemd[1]: Starting PostgreSQL Server... buildbot # [ 10.272091] systemd[1]: Starting SSH Daemon... buildbot # [ 10.283961] systemd[1]: Starting Permit User Sessions... buildbot # [ 10.398599] systemd[1]: Finished Permit User Sessions. buildbot # [ 10.410383] systemd[1]: Started Getty on tty1. buildbot # [ 10.411624] systemd[1]: Reached target Login Prompts. buildbot # [ 10.437954] sshd[529]: Server listening on 0.0.0.0 port 22. buildbot # [ 10.443863] sshd[529]: Server listening on :: port 22. buildbot # [ 10.449403] systemd[1]: Started SSH Daemon. buildbot # [ 10.452861] systemd[1]: Starting Setup git test repository with scheduled effects... buildbot # [ 10.626136] setup-git-repo-start[545]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 10.633608] setup-git-repo-start[545]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 10.640075] setup-git-repo-start[545]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 10.645450] setup-git-repo-start[545]: hint: call: buildbot # [ 10.649038] setup-git-repo-start[545]: hint: buildbot # [ 10.653727] setup-git-repo-start[545]: hint: git config --global init.defaultBranch buildbot # [ 10.660845] setup-git-repo-start[545]: hint: buildbot # [ 10.665323] setup-git-repo-start[545]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 10.671869] setup-git-repo-start[545]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 10.679584] setup-git-repo-start[545]: hint: buildbot # [ 10.683022] setup-git-repo-start[545]: hint: git branch -m buildbot # [ 10.689326] setup-git-repo-start[545]: hint: buildbot # [ 10.691299] setup-git-repo-start[545]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 10.697672] setup-git-repo-start[545]: Initialized empty Git repository in /srv/repos/test-flake.git/ buildbot # [ 10.709069] postgresql-pre-start[542]: The files belonging to this database system will be owned by user "postgres". buildbot # [ 10.714686] postgresql-pre-start[542]: This user must also own the server process. buildbot # [ 10.727920] postgresql-pre-start[542]: The database cluster will be initialized with locale "en_US.UTF-8". buildbot # [ 10.733843] postgresql-pre-start[542]: The default database encoding has accordingly been set to "UTF8". buildbot # [ 10.739351] postgresql-pre-start[542]: The default text search configuration will be set to "english". buildbot # [ 10.743796] postgresql-pre-start[542]: Data page checksums are disabled. buildbot # [ 10.752112] postgresql-pre-start[542]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok buildbot # [ 10.759328] postgresql-pre-start[542]: creating subdirectories ... ok buildbot # [ 10.763607] postgresql-pre-start[542]: selecting dynamic shared memory implementation ... posix buildbot # [ 10.769103] nginx-pre-start[540]: nginx: the configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf syntax is ok buildbot # [ 10.777731] nginx-pre-start[540]: nginx: configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf test is successful buildbot # [ 10.786802] systemd[1]: Started Nginx Web Server. buildbot # [ 10.792592] setup-git-repo-start[550]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 10.799086] setup-git-repo-start[550]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 10.810096] setup-git-repo-start[550]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 10.811486] setup-git-repo-start[550]: hint: call: buildbot # [ 10.815817] setup-git-repo-start[550]: hint: buildbot # [ 10.821605] setup-git-repo-start[550]: hint: git config --global init.defaultBranch buildbot # [ 10.826621] setup-git-repo-start[550]: hint: buildbot # [ 10.830632] setup-git-repo-start[550]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 10.838637] setup-git-repo-start[550]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 10.843990] setup-git-repo-start[550]: hint: buildbot # [ 10.851476] setup-git-repo-start[550]: hint: git branch -m buildbot # [ 10.856149] setup-git-repo-start[550]: hint: buildbot # [ 10.856813] setup-git-repo-start[550]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 10.858223] setup-git-repo-start[550]: Initialized empty Git repository in /tmp/test-flake/.git/ buildbot # [ 10.925320] setup-git-repo-start[561]: [master (root-commit) 37c01c3] Initial commit with scheduled effects buildbot # [ 10.932755] setup-git-repo-start[561]: 3 files changed, 131 insertions(+) buildbot # [ 10.940300] setup-git-repo-start[561]: create mode 100644 effects-lib.nix buildbot # [ 10.944321] setup-git-repo-start[561]: create mode 100644 flake.lock buildbot # [ 10.947617] setup-git-repo-start[561]: create mode 100644 flake.nix buildbot # [ 10.983046] postgresql-pre-start[542]: selecting default "max_connections" ... 100 buildbot # [ 11.098338] setup-git-repo-start[565]: To /srv/repos/test-flake.git buildbot # [ 11.101947] setup-git-repo-start[565]: * [new branch] master -> master buildbot # [ 11.103099] setup-git-repo-start[565]: branch 'master' set up to track 'origin/master'. buildbot # [ 11.113989] systemd[1]: Finished Setup git test repository with scheduled effects. buildbot # [ 11.122379] postgresql-pre-start[542]: selecting default "shared_buffers" ... 128MB buildbot # [ 11.352315] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:09.0/virtio8/input/input3 buildbot # [ 11.793958] systemd[1]: Starting Virtual Console Setup... buildbot # [ 11.820936] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 11.824236] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 11.828122] systemd[1]: Starting Virtual Console Setup... buildbot # [ 11.853373] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 12.103765] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. buildbot # [ 12.229639] 8021q: 802.1Q VLAN Support v1.8 buildbot # [ 12.209475] systemd[1]: Condition check resulted in /dev/ttyAMA0 being skipped. buildbot # [ 12.217284] systemd[1]: Started backdoor.service. buildbot # connecting to host... buildbot # [ 12.377856] cfg80211: Loading compiled-in X.509 certificates for regulatory database buildbot # [ 12.368961] (udev-worker)[589]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 12.373584] (udev-worker)[589]: Network interface NamePolicy= disabled on kernel command line. buildbot: Guest shell says: b'Spawning backdoor root shell...\n' buildbot: connected to guest root shell buildbot: (connecting took 12.69 seconds) buildbot: (finished: waiting for the VM to finish booting, in 13.12 seconds) buildbot # [ 12.384197] (udev-worker)[581]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 12.396406] systemd-vconsole-setup[596]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 12.403954] systemd[1]: Finished Virtual Console Setup.[ 12.433132] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' buildbot # [ 12.433596] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' buildbot # buildbot # [ 12.438884] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 buildbot # [ 12.439201] cfg80211: failed to load regulatory.db buildbot: (finished: waiting for unit sshd.service, in 13.23 seconds) buildbot: waiting for unit setup-git-repo.service buildbot: (finished: waiting for unit setup-git-repo.service, in 0.10 seconds) buildbot: waiting for unit multi-user.target buildbot # [ 12.643345] systemd[1]: Condition check resulted in Virtio network device being skipped. buildbot # [ 12.654813] systemd[1]: Starting Address configuration of eth1... buildbot # [ 12.801639] 8021q: adding VLAN 0 to HW filter on device eth0 buildbot # [ 12.781904] dhcpcd[518]: eth0: waiting for carrier buildbot # [ 12.782896] dhcpcd[518]: eth0: carrier acquired buildbot # [ 12.814396] 8021q: adding VLAN 0 to HW filter on device eth1 buildbot # [ 12.815251] dhcpcd[518]: DUID 00:01:00:01:31:dc:af:99:52:54:00:12:34:56 buildbot # [ 12.817181] dhcpcd[518]: eth0: IAID 00:12:34:56 buildbot # [ 12.821489] dhcpcd[518]: eth0: adding address fe80::5054:ff:fe12:3456 buildbot # [ 12.827421] network-addresses-eth1-start[627]: adding address 192.168.1.1/24... done buildbot # [ 12.847297] network-addresses-eth1-start[627]: adding address 2001:db8:1::1/64... done buildbot # [ 12.859179] systemd-logind[409]: Watching system buttons on /dev/input/event0 (gpio-keys) buildbot # [ 12.877484] systemd[1]: Finished Address configuration of eth1. buildbot # [ 13.066296] mousedev: PS/2 mouse device common for all mice buildbot # [ 13.218939] systemd-logind[409]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) buildbot # [ 13.952573] postgresql-pre-start[542]: selecting default time zone ... UTC buildbot # [ 13.959215] postgresql-pre-start[542]: creating configuration files ... ok buildbot # [ 14.419772] dhcpcd[518]: eth0: soliciting a DHCP lease buildbot # [ 14.425588] dhcpcd[518]: eth0: offered 10.0.2.15 from 10.0.2.2 buildbot # [ 14.432242] dhcpcd[518]: eth0: probing address 10.0.2.15/24 buildbot # [ 14.448183] postgresql-pre-start[542]: running bootstrap script ... ok buildbot # [ 14.876899] dhcpcd[518]: eth0: soliciting an IPv6 router buildbot # [ 14.878685] dhcpcd[518]: eth0: Router Advertisement from fe80::2 buildbot # [ 14.879558] dhcpcd[518]: eth0: adding address fec0::5054:ff:fe12:3456/64 buildbot # [ 14.884444] dhcpcd[518]: eth0: adding route to fec0::/64 buildbot # [ 14.885235] dhcpcd[518]: eth0: adding default route via fe80::2 buildbot # [ 15.518341] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. buildbot # [ 15.573818] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 15.575370] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 15.582452] systemd[1]: Stopping Virtual Console Setup... buildbot # [ 15.583230] systemd[1]: Starting Virtual Console Setup... buildbot # [ 15.651278] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 15.653521] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 15.656959] systemd[1]: Starting Virtual Console Setup... buildbot # [ 15.675072] postgresql-pre-start[542]: performing post-bootstrap initialization ... ok buildbot # [ 15.683421] systemd-logind[409]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) buildbot # [ 15.794526] postgresql-pre-start[542]: syncing data to disk ... ok buildbot # [ 15.796538] postgresql-pre-start[542]: initdb: warning: enabling "trust" authentication for local connections buildbot # [ 15.798085] postgresql-pre-start[542]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. buildbot # [ 15.800499] postgresql-pre-start[542]: Success. You can now start the database server using: buildbot # [ 15.801792] postgresql-pre-start[542]: pg_ctl -D /var/lib/postgresql/17 -l logfile start buildbot # [ 15.931318] postgres[693]: [693] LOG: starting PostgreSQL 17.10 on aarch64-unknown-linux-gnu, compiled by clang version 21.1.8, 64-bit buildbot # [ 15.942728] postgres[693]: [693] LOG: listening on IPv6 address "::1", port 5432 buildbot # [ 15.944375] postgres[693]: [693] LOG: listening on IPv4 address "127.0.0.1", port 5432 buildbot # [ 15.946129] postgres[693]: [693] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" buildbot # [ 15.955897] postgres[699]: [699] LOG: database system was shut down at 2026-07-05 06:01:00 GMT buildbot # [ 15.965706] postgres[693]: [693] LOG: database system is ready to accept connections buildbot # [ 15.971377] systemd[1]: Started PostgreSQL Server. buildbot # [ 15.977365] systemd[1]: Starting PostgreSQL Setup Scripts... buildbot # [ 16.058567] systemd-vconsole-setup[688]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 16.062806] systemd[1]: Finished Virtual Console Setup. buildbot # [ 16.180590] postgresql-setup-start[711]: CREATE DATABASE buildbot # [ 16.227237] postgresql-setup-start[716]: CREATE ROLE buildbot # [ 16.257054] postgresql-setup-start[718]: ALTER DATABASE buildbot # [ 16.265166] systemd[1]: Finished PostgreSQL Setup Scripts. buildbot # [ 16.268711] systemd[1]: Reached target PostgreSQL. buildbot # [ 16.271508] systemd[1]: Starting Buildbot Continuous Integration Server.... buildbot # [ 16.354375] buildbot-master-pre-start[734]: mkdir: created directory '/var/lib/buildbot/master' buildbot # [ 19.121158] dhcpcd[518]: eth0: leased 10.0.2.15 for 86400 seconds buildbot # [ 19.121300] dhcpcd[518]: eth0: adding route to 10.0.2.0/24 buildbot # [ 19.121343] dhcpcd[518]: eth0: adding default route via 10.0.2.2 buildbot # [ 19.262038] systemd[1]: Started DHCP Client. buildbot # [ 22.060121] buildbot-master-pre-start[738]: updating existing installation buildbot # [ 22.061209] buildbot-master-pre-start[738]: not touching existing buildbot.tac buildbot # [ 22.062194] buildbot-master-pre-start[738]: creating buildbot.tac.new instead buildbot # [ 22.063150] buildbot-master-pre-start[738]: creating /var/lib/buildbot/master/master.cfg.sample buildbot # [ 22.068113] buildbot-master-pre-start[738]: creating database (postgresql://@/buildbot) buildbot # [ 22.069250] buildbot-master-pre-start[738]: buildmaster configured in /var/lib/buildbot/master buildbot # [ 22.449557] systemd[1]: Started Buildbot Continuous Integration Server.. buildbot # [ 22.455234] systemd[1]: Started Buildbot Worker.. buildbot # [ 22.460631] systemd[1]: Reached target Multi-User System. buildbot # [ 22.461992] systemd[1]: Startup finished in 912ms (kernel) + 3.914s (initrd) + 17.634s (userspace) = 22.461s. buildbot: (finished: waiting for unit multi-user.target, in 10.35 seconds) subtest: Master and worker services start buildbot: waiting for unit buildbot-master.service buildbot: (finished: waiting for unit buildbot-master.service, in 0.12 seconds) buildbot: waiting for unit buildbot-worker.service buildbot: (finished: waiting for unit buildbot-worker.service, in 0.10 seconds) buildbot: waiting for TCP port 8010 on localhost buildbot # [ 24.140306] twistd[839]: Starting worker local-worker-000 buildbot # [ 24.140435] twistd[839]: 2026-07-05T06:01:08+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py... buildbot # [ 24.144211] twistd[839]: 2026-07-05T06:01:08+0000 [-] Loaded. buildbot # [ 24.146000] twistd[839]: 2026-07-05T06:01:08+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 24.149415] twistd[839]: 2026-07-05T06:01:08+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 24.151617] twistd[839]: 2026-07-05T06:01:08+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 24.154280] twistd[839]: 2026-07-05T06:01:08+0000 [-] recording hostname in twistd.hostname buildbot # [ 24.156028] twistd[839]: 2026-07-05T06:01:08+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 24.162049] twistd[839]: 2026-07-05T06:01:08+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect in 1.5583127349025754 seconds. buildbot # [ 24.165422] twistd[839]: 2026-07-05T06:01:08+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 25.726923] twistd[839]: 2026-07-05T06:01:10+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 25.732105] twistd[839]: 2026-07-05T06:01:10+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect in 2.719837793951399 seconds. buildbot # [ 25.735496] twistd[839]: 2026-07-05T06:01:10+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 26.135320] twistd[838]: 2026-07-05T06:01:08+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac... buildbot # [ 26.137487] twistd[838]: 2026-07-05T06:01:10+0000 [-] Loaded. buildbot # [ 26.138509] twistd[838]: 2026-07-05T06:01:10+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 26.141389] twistd[838]: 2026-07-05T06:01:10+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 26.143392] twistd[838]: 2026-07-05T06:01:10+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0 buildbot # [ 26.153012] twistd[838]: 2026-07-05T06:01:10+0000 [-] Loading configuration from '/nix/store/lkfkk9wk4n6j6iafap6c6lgmx76rs7hz-master.cfg' buildbot # [ 27.009772] twistd[838]: 2026-07-05T06:01:11+0000 [-] Setting up database with URL 'postgresql://@/buildbot' buildbot # [ 27.116685] twistd[838]: 2026-07-05T06:01:11+0000 [-] adding 9 new builders, removing 0 buildbot # [ 27.238727] twistd[838]: 2026-07-05T06:01:11+0000 [-] adding 3 new services, removing 0 buildbot # [ 27.426126] twistd[838]: 2026-07-05T06:01:12+0000 [-] adding 1 new change_sources, removing 0 buildbot # [ 27.436087] twistd[838]: 2026-07-05T06:01:12+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 27.449115] twistd[838]: 2026-07-05T06:01:12+0000 [-] adding 14 new schedulers, removing 0 buildbot # [ 27.631739] twistd[838]: 2026-07-05T06:01:12+0000 [-] BuildbotSite starting on 8010 buildbot # [ 27.634225] twistd[838]: 2026-07-05T06:01:12+0000 [buildbot.www.service.BuildbotSite#info] Starting factory buildbot # [ 27.637107] twistd[838]: 2026-07-05T06:01:12+0000 [-] adding 5 new workers, removing 0 buildbot # [ 27.646757] twistd[838]: 2026-07-05T06:01:12+0000 [-] PBServerFactory starting on 9989 buildbot # [ 27.649253] twistd[838]: 2026-07-05T06:01:12+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory buildbot # [ 27.698245] twistd[838]: 2026-07-05T06:01:12+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 27.699447] twistd[838]: 2026-07-05T06:01:12+0000 [-] recording hostname in twistd.hostname buildbot # [ 27.703785] twistd[838]: 2026-07-05T06:01:12+0000 [-] message from master: attached buildbot # [ 27.705146] twistd[838]: 2026-07-05T06:01:12+0000 [-] Got workerinfo from '__Janitor' buildbot # [ 27.712106] twistd[838]: 2026-07-05T06:01:12+0000 [-] bot attached buildbot # [ 27.713938] twistd[838]: 2026-07-05T06:01:12+0000 [-] Worker __Janitor attached to __Janitor buildbot # [ 27.716483] twistd[838]: 2026-07-05T06:01:12+0000 [-] message from master: attached buildbot # [ 27.731663] sshd-session[902]: Accepted publickey for root from ::1 port 51532 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 27.754614] sshd-session[902]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 27.769407] twistd[838]: 2026-07-05T06:01:12+0000 [-] BuildMaster is running buildbot # [ 27.789169] systemd[1]: Created slice Slice /user/0. buildbot # [ 27.793160] systemd[1]: Starting User Runtime Directory /run/user/0... buildbot # [ 27.806662] systemd-logind[409]: New session '1' of user 'root' with class 'user' and type 'tty'. buildbot # [ 27.843707] systemd[1]: Finished User Runtime Directory /run/user/0. buildbot # [ 27.860163] systemd[1]: Starting User Manager for UID 0... buildbot # [ 27.902575] (systemd)[907]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 27.908731] systemd-logind[409]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'. buildbot # [ 28.244834] systemd[907]: Queued start job for default target Main User Target. buildbot # [ 28.253633] systemd[907]: Created slice User Application Slice. buildbot # [ 28.255802] systemd[907]: Started Daily Cleanup of User's Temporary Directories. buildbot # [ 28.257121] systemd[907]: Reached target Paths. buildbot # [ 28.258090] systemd[907]: Reached target Timers. buildbot # [ 28.260061] systemd[907]: Starting D-Bus User Message Bus Socket... buildbot # [ 28.262788] systemd[907]: Starting Create User Files and Directories... buildbot # [ 28.330506] systemd[907]: Finished Create User Files and Directories. buildbot # [ 28.368631] systemd[907]: Listening on D-Bus User Message Bus Socket. buildbot # [ 28.372539] systemd[907]: Reached target Sockets. buildbot # [ 28.373278] systemd[907]: Reached target Basic System. buildbot # [ 28.374015] systemd[907]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system buildbot # [ 28.375381] systemd[907]: Reached target Main User Target. buildbot # [ 28.376517] systemd[907]: Startup finished in 438ms. buildbot # [ 28.377236] systemd[1]: Started User Manager for UID 0. buildbot # [ 28.380873] systemd[1]: Started Session 1 of User root. buildbot # [ 28.414604] sshd-session[920]: Received disconnect from ::1 port 51532:11: disconnected by user buildbot # [ 28.416681] sshd-session[920]: Disconnected from user root ::1 port 51532 buildbot # [ 28.417851] sshd-session[902]: pam_unix(sshd:session): session closed for user root buildbot # [ 28.433136] systemd[1]: session-1.scope: Deactivated successfully. buildbot # [ 28.434061] systemd-logind[409]: Session 1 logged out. Waiting for processes to exit. buildbot # [ 28.437059] systemd-logind[409]: Removed session 1. buildbot # [ 28.457548] twistd[839]: 2026-07-05T06:01:13+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 28.474972] twistd[838]: 2026-07-05T06:01:13+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=49164) buildbot # [ 28.483468] twistd[839]: 2026-07-05T06:01:13+0000 [Broker,client] message from master: attached buildbot # [ 28.487760] twistd[838]: 2026-07-05T06:01:13+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000' buildbot # [ 28.512262] twistd[838]: 2026-07-05T06:01:13+0000 [-] bot attached buildbot # [ 28.514767] twistd[838]: 2026-07-05T06:01:13+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed buildbot # [ 28.521971] twistd[838]: 2026-07-05T06:01:13+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect buildbot # [ 28.523528] twistd[838]: 2026-07-05T06:01:13+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval buildbot # [ 28.554772] twistd[838]: 2026-07-05T06:01:13+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure buildbot # [ 28.575092] twistd[838]: 2026-07-05T06:01:13+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot buildbot # [ 28.602747] twistd[838]: 2026-07-05T06:01:13+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded! buildbot # [ 28.625351] twistd[838]: 2026-07-05T06:01:13+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect buildbot # [ 28.627022] twistd[838]: 2026-07-05T06:01:13+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build buildbot: (finished: waiting for TCP port 8010 on localhost, in 5.48 seconds) buildbot: waiting for success: curl --fail --head http://localhost:8010 buildbot # [ 28.649168] twistd[839]: 2026-07-05T06:01:13+0000 [Broker,client] message from master: attached buildbot # [ 28.650265] twistd[839]: 2026-07-05T06:01:13+0000 [Broker,client] message from master: attached buildbot # [ 28.668950] twistd[839]: 2026-07-05T06:01:13+0000 [Broker,client] message from master: attached buildbot # [ 28.670133] twistd[839]: 2026-07-05T06:01:13+0000 [Broker,client] message from master: attached buildbot # [ 28.671241] twistd[839]: 2026-07-05T06:01:13+0000 [Broker,client] message from master: attached buildbot # [ 28.708365] twistd[839]: 2026-07-05T06:01:13+0000 [Broker,client] message from master: attached buildbot # [ 28.709563] twistd[839]: 2026-07-05T06:01:13+0000 [Broker,client] message from master: attached buildbot # [ 28.710721] twistd[839]: 2026-07-05T06:01:13+0000 [Broker,client] message from master: attached buildbot # [ 28.711878] twistd[839]: 2026-07-05T06:01:13+0000 [Broker,client] Connected to buildmaster; worker is ready buildbot # [ 28.731738] twistd[839]: 2026-07-05T06:01:13+0000 [Broker,client] sending application-level keepalives every 600 seconds buildbot # [ 28.771350] sshd-session[929]: Accepted publickey for root from ::1 port 51534 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 28.788904] sshd-session[929]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 28.799997] systemd-logind[409]: New session '3' of user 'root' with class 'user' and type 'tty'. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # [ 28.808490] systemd[1]: Started Session 3 of User root. buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.21 seconds) (finished: subtest: Master and worker services start, in 5.90 seconds) subtest: Project is registered buildbot: waiting for success: curl http://localhost:8010/api/v2/projects buildbot # [ 28.869048] sshd-session[941]: Received disconnect from ::1 port 51534:11: disconnected by user buildbot # [ 28.870276] sshd-session[941]: Disconnected from user root ::1 port 51534 buildbot # [ 28.882388] sshd-session[929]: pam_unix(sshd:session): session closed for user root buildbot # [ 28.885919] systemd[1]: session-3.scope: Deactivated successfully. buildbot # [ 28.888708] systemd-logind[409]: Session 3 logged out. Waiting for processes to exit. buildbot # [ 28.890374] systemd-logind[409]: Removed session 3. buildbot # [ 28.927731] twistd[838]: 2026-07-05T06:01:13+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 9051 0 0100 266 100 266 0 0 7779 0 0100 266 100 266 0 0 6433 0 0 buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.17 seconds) (finished: subtest: Project is registered, in 0.17 seconds) subtest: CLI list-schedules works buildbot: must succeed: cd /tmp/test-flake buildbot-effects list-schedules buildbot: (finished: must succeed: cd /tmp/test-flake buildbot-effects list-schedules , in 0.38 seconds) (finished: subtest: CLI list-schedules works, in 0.38 seconds) subtest: Push a new commit to trigger build buildbot: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master buildbot # Enumerating objects: 5, done. buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done. buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done. buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 296 bytes | 148.00 KiB/s, done. buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0) buildbot # To /srv/repos/test-flake.git buildbot # 37c01c3..0eee591 master -> master buildbot: (finished: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master , in 0.11 seconds) (finished: subtest: Push a new commit to trigger build, in 0.11 seconds) subtest: Wait for nix-eval build to complete buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3307 0 0100 51 100 51 0 0 2848 0 0100 51 100 51 0 0 2470 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4093 0 0100 51 100 51 0 0 3012 0 0100 51 100 51 0 0 2447 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4167 0 0100 51 100 51 0 0 2989 0 0100 51 100 51 0 0 2417 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3404 0 0100 51 100 51 0 0 2508 0 0100 51 100 51 0 0 2026 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3554 0 0100 51 100 51 0 0 2678 0 0100 51 100 51 0 0 2210 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2091 0 0100 51 100 51 0 0 1745 0 0100 51 100 51 0 0 1531 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4391 0 0100 51 100 51 0 0 3118 0 0100 51 100 51 0 0 2496 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2333 0 0100 51 100 51 0 0 1867 0 0100 51 100 51 0 0 1578 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot # [ 37.717839] sshd-session[1016]: Accepted publickey for root from ::1 port 44930 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 37.742206] sshd-session[1016]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 37.760134] systemd-logind[409]: New session '4' of user 'root' with class 'user' and type 'tty'. buildbot # [ 37.765544] systemd[1]: Started Session 4 of User root. buildbot # [ 37.806262] sshd-session[1019]: Received disconnect from ::1 port 44930:11: disconnected by user buildbot # [ 37.809339] sshd-session[1019]: Disconnected from user root ::1 port 44930 buildbot # [ 37.812203] sshd-session[1016]: pam_unix(sshd:session): session closed for user root buildbot # [ 37.819232] systemd[1]: session-4.scope: Deactivated successfully. buildbot # [ 37.828940] systemd-logind[409]: Session 4 logged out. Waiting for processes to exit. buildbot # [ 37.832590] systemd-logind[409]: Removed session 4. buildbot # [ 38.027078] sshd-session[1024]: Accepted publickey for root from ::1 port 44932 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 38.046336] sshd-session[1024]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 38.061304] systemd-logind[409]: New session '5' of user 'root' with class 'user' and type 'tty'. buildbot # [ 38.068914] systemd[1]: Started Session 5 of User root. buildbot # [ 38.121685] sshd-session[1027]: Received disconnect from ::1 port 44932:11: disconnected by user buildbot # [ 38.124961] sshd-session[1027]: Disconnected from user root ::1 port 44932 buildbot # [ 38.129268] sshd-session[1024]: pam_unix(sshd:session): session closed for user root buildbot # [ 38.134930] systemd[1]: session-5.scope: Deactivated successfully. buildbot # [ 38.139681] systemd-logind[409]: Session 5 logged out. Waiting for processes to exit. buildbot # [ 38.141351] systemd-logind[409]: Removed session 5. buildbot # [ 38.163839] twistd[838]: 2026-07-05T06:01:22+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # [ 38.197433] twistd[838]: 2026-07-05T06:01:22+0000 [-] gitpoller: processing 1 changes: ['0eee591c11f7b703b942a5ef7169fe89201ebc33'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master" buildbot # [ 38.299547] twistd[838]: 2026-07-05T06:01:22+0000 [-] added change with revision 0eee591c11f7b703b942a5ef7169fe89201ebc33 to database buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4488 0 0100 51 100 51 0 0 3691 0 0100 51 100 51 0 0 3082 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.06 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4580 0 0100 51 100 51 0 0 3246 0 0100 51 100 51 0 0 2559 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2772 0 0100 51 100 51 0 0 2196 0 0100 51 100 51 0 0 1847 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4219 0 0100 51 100 51 0 0 3028 0 0100 51 100 51 0 0 2400 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4080 0 0100 51 100 51 0 0 2888 0 0100 51 100 51 0 0 2319 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot # [ 43.361786] twistd[838]: 2026-07-05T06:01:28+0000 [-] added buildset 1 to database buildbot # [ 43.529244] twistd[838]: 2026-07-05T06:01:28+0000 [-] starting build using worker buildbot # [ 43.539229] twistd[838]: 2026-07-05T06:01:28+0000 [-] .startBuild buildbot # [ 43.625627] twistd[838]: 2026-07-05T06:01:28+0000 [-] acquireLocks(worker , locks []) buildbot # [ 43.631525] twistd[838]: 2026-07-05T06:01:28+0000 [-] starting build .. pinging the worker buildbot # [ 43.638221] twistd[838]: 2026-07-05T06:01:28+0000 [-] sending ping buildbot # [ 43.640964] twistd[838]: 2026-07-05T06:01:28+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 43.642818] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] message from master: ping buildbot # [ 43.667426] twistd[838]: 2026-07-05T06:01:28+0000 [-] : RemoteCommand.run [0] buildbot # [ 43.676570] twistd[838]: 2026-07-05T06:01:28+0000 [-] command '['git', '--version']' in dir 'build' buildbot # [ 43.677976] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command 0): startCommand:shell buildbot # [ 43.679269] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand buildbot # [ 43.686195] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command ['git', '--version']): git --version buildbot # [ 43.687623] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 43.690752] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command ['git', '--version']): watching logfiles {} buildbot # [ 43.692590] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version'] buildbot # [ 43.694140] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command ['git', '--version']): using PTY: False buildbot # [ 43.704072] twistd[839]: 2026-07-05T06:01:28+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.029095 buildbot # [ 43.705977] twistd[839]: 2026-07-05T06:01:28+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) buildbot # [ 43.729766] twistd[838]: 2026-07-05T06:01:28+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 43.760562] twistd[838]: 2026-07-05T06:01:28+0000 [-] : RemoteCommand.run [1] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 43.773405] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command 1): startCommand:stat buildbot # [ 43.778957] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched' buildbot # [ 43.788313] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) buildbot # [ 43.796491] twistd[838]: 2026-07-05T06:01:28+0000 [Broker,0,127.0.0.1] rc=2 buildbot # [ 43.811965] twistd[838]: 2026-07-05T06:01:28+0000 [-] : RemoteCommand.run [2] buildbot # [ 43.817106] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command 2): startCommand:mkdir buildbot # [ 43.818353] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) buildbot # [ 43.826194] twistd[838]: 2026-07-05T06:01:28+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 43.829891] twistd[838]: 2026-07-05T06:01:28+0000 [-] : RemoteCommand.run [3] buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 37281 0 0100 401 100 401 0 0 29708 0 0100 401 100 401 0 0 25196 0 0 buildbot # [ 43.865623] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command 3): startCommand:downloadFile buildbot # [ 43.869273] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot # [ 43.874896] twistd[838]: 2026-07-05T06:01:28+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 43.879392] twistd[838]: 2026-07-05T06:01:28+0000 [-] : RemoteCommand.run [4] buildbot # [ 43.918105] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command 4): startCommand:listdir buildbot # [ 43.919512] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) buildbot # [ 43.924386] twistd[838]: 2026-07-05T06:01:28+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 43.929963] twistd[838]: 2026-07-05T06:01:28+0000 [-] No git repo present, making full clone buildbot # [ 43.931321] twistd[838]: 2026-07-05T06:01:28+0000 [-] : RemoteCommand.run [5] buildbot # [ 43.936064] twistd[838]: 2026-07-05T06:01:28+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build' buildbot # [ 43.961042] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command 5): startCommand:shell buildbot # [ 43.965490] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand buildbot # [ 43.976870] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress buildbot # [ 43.996514] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 44.002363] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {} buildbot # [ 44.007568] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress'] buildbot # [ 44.016397] twistd[839]: 2026-07-05T06:01:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False buildbot # [ 44.207952] sshd-session[1066]: Accepted publickey for root from ::1 port 60754 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 44.223789] sshd-session[1066]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 44.237519] systemd-logind[409]: New session '6' of user 'root' with class 'user' and type 'tty'. buildbot # [ 44.245172] systemd[1]: Started Session 6 of User root. buildbot # [ 44.304840] sshd-session[1069]: Received disconnect from ::1 port 60754:11: disconnected by user buildbot # [ 44.306918] sshd-session[1069]: Disconnected from user root ::1 port 60754 buildbot # [ 44.309835] sshd-session[1066]: pam_unix(sshd:session): session closed for user root buildbot # [ 44.314159] systemd[1]: session-6.scope: Deactivated successfully. buildbot # [ 44.318988] systemd-logind[409]: Session 6 logged out. Waiting for processes to exit. buildbot # [ 44.321136] systemd-logind[409]: Removed session 6. buildbot # [ 44.336147] twistd[839]: 2026-07-05T06:01:28+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.371646 buildbot # [ 44.345055] twistd[839]: 2026-07-05T06:01:28+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) buildbot # [ 44.348929] twistd[838]: 2026-07-05T06:01:29+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.368447] twistd[838]: 2026-07-05T06:01:29+0000 [-] : RemoteCommand.run [6] buildbot # [ 44.371784] twistd[838]: 2026-07-05T06:01:29+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '0eee591c11f7b703b942a5ef7169fe89201ebc33']' in dir 'build' buildbot # [ 44.384885] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command 6): startCommand:shell buildbot # [ 44.391064] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '0eee591c11f7b703b942a5ef7169fe89201ebc33']): RunProcess._startCommand buildbot # [ 44.396843] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '0eee591c11f7b703b942a5ef7169fe89201ebc33']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f 0eee591c11f7b703b942a5ef7169fe89201ebc33 buildbot # [ 44.402475] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '0eee591c11f7b703b942a5ef7169fe89201ebc33']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 44.408174] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '0eee591c11f7b703b942a5ef7169fe89201ebc33']): watching logfiles {} buildbot # [ 44.411509] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '0eee591c11f7b703b942a5ef7169fe89201ebc33']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'0eee591c11f7b703b942a5ef7169fe89201ebc33'] buildbot # [ 44.417952] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '0eee591c11f7b703b942a5ef7169fe89201ebc33']): using PTY: False buildbot # [ 44.432094] twistd[839]: 2026-07-05T06:01:29+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '0eee591c11f7b703b942a5ef7169fe89201ebc33']): command finished with signal None, exit code 0, elapsedTime: 0.044216 buildbot # [ 44.435891] twistd[839]: 2026-07-05T06:01:29+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) buildbot # [ 44.441881] twistd[838]: 2026-07-05T06:01:29+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.464109] twistd[838]: 2026-07-05T06:01:29+0000 [-] : RemoteCommand.run [7] buildbot # [ 44.467371] twistd[838]: 2026-07-05T06:01:29+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build' buildbot # [ 44.488859] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command 7): startCommand:shell buildbot # [ 44.494696] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand buildbot # [ 44.500392] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive buildbot # [ 44.505404] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 44.511512] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {} buildbot # [ 44.515502] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive'] buildbot # [ 44.521170] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False buildbot # [ 44.627739] twistd[839]: 2026-07-05T06:01:29+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.133147 buildbot # [ 44.632301] twistd[839]: 2026-07-05T06:01:29+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) buildbot # [ 44.635697] twistd[838]: 2026-07-05T06:01:29+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.649188] twistd[838]: 2026-07-05T06:01:29+0000 [-] : RemoteCommand.run [8] buildbot # [ 44.650770] twistd[838]: 2026-07-05T06:01:29+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build' buildbot # [ 44.670867] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command 8): startCommand:shell buildbot # [ 44.674913] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand buildbot # [ 44.678170] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD buildbot # [ 44.679682] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 44.682355] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {} buildbot # [ 44.684169] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD'] buildbot # [ 44.685932] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False buildbot # [ 44.694927] twistd[839]: 2026-07-05T06:01:29+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.024593 buildbot # [ 44.697019] twistd[839]: 2026-07-05T06:01:29+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) buildbot # [ 44.721788] twistd[838]: 2026-07-05T06:01:29+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.741590] twistd[838]: 2026-07-05T06:01:29+0000 [-] Got Git revision 0eee591c11f7b703b942a5ef7169fe89201ebc33 buildbot # [ 44.742968] twistd[838]: 2026-07-05T06:01:29+0000 [-] : RemoteCommand.run [9] buildbot # [ 44.770889] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command 9): startCommand:rmdir buildbot # [ 44.775488] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand buildbot # [ 44.780450] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot buildbot # [ 44.783424] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs) buildbot # [ 44.786534] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {} buildbot # [ 44.789351] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot'] buildbot # [ 44.793097] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False buildbot # [ 44.804748] twistd[839]: 2026-07-05T06:01:29+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.034158 buildbot # [ 44.807556] twistd[839]: 2026-07-05T06:01:29+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) buildbot # [ 44.821379] twistd[838]: 2026-07-05T06:01:29+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.841352] twistd[838]: 2026-07-05T06:01:29+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): [] buildbot # [ 44.866273] twistd[838]: 2026-07-05T06:01:29+0000 [-] step 'git' complete: success (None) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 44.874343] twistd[838]: 2026-07-05T06:01:29+0000 [-] acquireLocks(step NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(, )]) buildbot # [ 44.897118] twistd[838]: 2026-07-05T06:01:29+0000 [-] : RemoteCommand.run [10] buildbot # [ 44.899210] twistd[838]: 2026-07-05T06:01:29+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build' buildbot # [ 44.906448] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command 10): startCommand:shell buildbot # [ 44.913731] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand buildbot # [ 44.918489] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi' buildbot # [ 44.923315] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 44.926935] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {} buildbot # [ 44.930141] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'] buildbot # [ 44.933406] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False buildbot # [ 44.945994] twistd[839]: 2026-07-05T06:01:29+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.049635 buildbot # [ 44.948793] twistd[839]: 2026-07-05T06:01:29+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) buildbot # [ 44.957980] twistd[838]: 2026-07-05T06:01:29+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.964476] twistd[838]: 2026-07-05T06:01:29+0000 [-] : RemoteCommand.run [11] buildbot # [ 44.970193] twistd[838]: 2026-07-05T06:01:29+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build' buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 28608 0 0100 401 100 401 0 0 243[ 45.007915] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command 11): startCommand:shell buildbot # 57 0 0100 401 100 401 0 0 15465 0 0 buildbot # [ 45.014888] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand buildbot # [ 45.025736] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks' buildbot # [ 45.034545] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 45.040819] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {} buildbot # [ 45.045958] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks'] buildbot # [ 45.054737] twistd[839]: 2026-07-05T06:01:29+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.19 seconds) buildbot # [ 45.169464] systemd[1]: Started Nix Daemon. buildbot # [ 45.264839] nix-daemon[1114]: accepted connection from pid 1113, user buildbot-worker buildbot # [ 45.288690] twistd[839]: 2026-07-05T06:01:29+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 0.282070 buildbot # [ 45.298906] twistd[839]: 2026-07-05T06:01:29+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) buildbot # [ 45.302654] twistd[838]: 2026-07-05T06:01:29+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.326392] twistd[838]: 2026-07-05T06:01:29+0000 [-] releaseLocks(NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(, )] buildbot # [ 45.343686] twistd[838]: 2026-07-05T06:01:30+0000 [-] step 'Evaluate flake' complete: success (None) buildbot # [ 45.366970] twistd[838]: 2026-07-05T06:01:30+0000 [-] releaseLocks(BuildTrigger(project=, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): [] buildbot # [ 45.379176] twistd[838]: 2026-07-05T06:01:30+0000 [-] step 'build flake' complete: success (None) buildbot # [ 45.391624] twistd[838]: 2026-07-05T06:01:30+0000 [-] releaseLocks(ProcessSkippedBuilds(project=, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=. at 0xf8c166670c20>, hideStepIf=. at 0xf8c166670cc0>)): [] buildbot # [ 45.402223] twistd[838]: 2026-07-05T06:01:30+0000 [-] step 'Process skipped builds' complete: skipped (None) buildbot # [ 45.417742] twistd[838]: 2026-07-05T06:01:30+0000 [-] : RemoteCommand.run [12] buildbot # [ 45.425919] twistd[838]: 2026-07-05T06:01:30+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build' buildbot # [ 45.428004] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command 12): startCommand:shell buildbot # [ 45.429674] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand buildbot # [ 45.432338] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ buildbot # [ 45.437190] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 45.440368] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {} buildbot # [ 45.442715] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/'] buildbot # [ 45.446142] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False buildbot # [ 45.453178] twistd[839]: 2026-07-05T06:01:30+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.036501 buildbot # [ 45.455847] twistd[839]: 2026-07-05T06:01:30+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) buildbot # [ 45.469612] twistd[838]: 2026-07-05T06:01:30+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.645415] twistd[838]: 2026-07-05T06:01:30+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): [] buildbot # [ 45.657580] twistd[838]: 2026-07-05T06:01:30+0000 [-] step 'Cleanup drv paths' complete: success (None) buildbot # [ 45.680095] twistd[838]: 2026-07-05T06:01:30+0000 [-] : RemoteCommand.run [13] buildbot # [ 45.682728] twistd[838]: 2026-07-05T06:01:30+0000 [-] command '['buildbot-effects', 'list', '--rev', '0eee591c11f7b703b942a5ef7169fe89201ebc33', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 45.694166] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command 13): startCommand:shell buildbot # [ 45.695410] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '0eee591c11f7b703b942a5ef7169fe89201ebc33', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 45.698894] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '0eee591c11f7b703b942a5ef7169fe89201ebc33', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev 0eee591c11f7b703b942a5ef7169fe89201ebc33 --branch master --repo test-flake buildbot # [ 45.702889] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '0eee591c11f7b703b942a5ef7169fe89201ebc33', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 45.706898] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '0eee591c11f7b703b942a5ef7169fe89201ebc33', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 45.709954] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '0eee591c11f7b703b942a5ef7169fe89201ebc33', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'0eee591c11f7b703b942a5ef7169fe89201ebc33', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 45.714264] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '0eee591c11f7b703b942a5ef7169fe89201ebc33', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot # [ 46.003469] nix-daemon[1114]: accepted connection from pid 1124, user buildbot-worker buildbot # [ 46.036908] twistd[839]: 2026-07-05T06:01:30+0000 [-] (command ['buildbot-effects', 'list', '--rev', '0eee591c11f7b703b942a5ef7169fe89201ebc33', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.350545 buildbot # [ 46.044878] twistd[839]: 2026-07-05T06:01:30+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) buildbot # [ 46.047187] twistd[838]: 2026-07-05T06:01:30+0000 [Broker,0,127.0.0.1] rc=0 buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 46.083678] twistd[838]: 2026-07-05T06:01:30+0000 [-] releaseLocks(BuildbotEffectsCommand(project=, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=. at 0xf8c166671440>, logEnviron=False)): [] buildbot # [ 46.099698] twistd[838]: 2026-07-05T06:01:30+0000 [-] step 'Evaluate effects' complete: success (None) buildbot # [ 46.121284] twistd[838]: 2026-07-05T06:01:30+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): [] buildbot # [ 46.130689] twistd[838]: 2026-07-05T06:01:30+0000 [-] step 'Buildbot effect' complete: success (None) buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # [ 46.152807] twistd[838]: 2026-07-05T06:01:30+0000 [-] : RemoteCommand.run [14] buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0[ 46.167551] twistd[838]: 2026-07-05T06:01:30+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', '0eee591c11f7b703b942a5ef7169fe89201ebc33', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 46.176375] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command 14): startCommand:shell buildbot # [ 46.177594] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '0eee591c11f7b703b942a5ef7169fe89201ebc33', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 46.184633] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '0eee591c11f7b703b942a5ef7169fe89201ebc33', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev 0eee591c11f7b703b942a5ef7169fe89201ebc33 --branch master --repo test-flake buildbot # 100 401 100 401 0 0 9191 0 0100 401 100 401 [ 46.194733] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '0eee591c11f7b703b942a5ef7169fe89201ebc33', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # 0 0 8673 0 0100 401 100 401 0 0 7172 0 0 buildbot # [ 46.203740] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '0eee591c11f7b703b942a5ef7169fe89201ebc33', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 46.210311] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '0eee591c11f7b703b942a5ef7169fe89201ebc33', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'0eee591c11f7b703b942a5ef7169fe89201ebc33', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 46.215333] twistd[839]: 2026-07-05T06:01:30+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '0eee591c11f7b703b942a5ef7169fe89201ebc33', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds) buildbot # [ 46.487737] nix-daemon[1114]: accepted connection from pid 1136, user buildbot-worker buildbot # [ 46.520077] twistd[839]: 2026-07-05T06:01:31+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', '0eee591c11f7b703b942a5ef7169fe89201ebc33', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.361353 buildbot # [ 46.523199] twistd[839]: 2026-07-05T06:01:31+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) buildbot # [ 46.530897] twistd[838]: 2026-07-05T06:01:31+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 46.564056] twistd[838]: 2026-07-05T06:01:31+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=. at 0xf8c166671620>, hideStepIf=. at 0xf8c1666716c0>, logEnviron=False)): [] buildbot # [ 46.580212] twistd[838]: 2026-07-05T06:01:31+0000 [-] step 'Evaluate scheduled effects' complete: success (None) buildbot # [ 46.584310] twistd[838]: 2026-07-05T06:01:31+0000 [-] : build finished buildbot # [ 46.595180] twistd[838]: 2026-07-05T06:01:31+0000 [-] releaseLocks(): [] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 33204 0 0100 411 100 411 0 0 24487 0 0100 411 100 411 0 0 19696 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) (finished: subtest: Wait for nix-eval build to complete, in 17.81 seconds) subtest: Schedule cache is created buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds) buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds) (finished: subtest: Schedule cache is created, in 0.06 seconds) subtest: Nightly schedulers are created buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 47940 0 0100 3793 100 3793 0 0 46506 0 0100 3793 100 3793 0 0 44427 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.14 seconds) buildbot # [ 47.691225] sshd-session[1172]: Accepted publickey for root from ::1 port 60766 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 47.706409] sshd-session[1172]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 47.721188] systemd-logind[409]: New session '7' of user 'root' with class 'user' and type 'tty'. buildbot # [ 47.725276] systemd[1]: Started Session 7 of User root. buildbot # [ 47.762018] sshd-session[1175]: Received disconnect from ::1 port 60766:11: disconnected by user buildbot # [ 47.764500] sshd-session[1175]: Disconnected from user root ::1 port 60766 buildbot # [ 47.766711] sshd-session[1172]: pam_unix(sshd:session): session closed for user root buildbot # [ 47.782466] systemd[1]: session-7.scope: Deactivated successfully. buildbot # [ 47.788734] systemd-logind[409]: Session 7 logged out. Waiting for processes to exit. buildbot # [ 47.790919] systemd-logind[409]: Removed session 7. buildbot # [ 47.970882] sshd-session[1180]: Accepted publickey for root from ::1 port 60768 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 47.986118] sshd-session[1180]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 47.996789] systemd-logind[409]: New session '8' of user 'root' with class 'user' and type 'tty'. buildbot # [ 48.005192] systemd[1]: Started Session 8 of User root. buildbot # [ 48.050406] sshd-session[1183]: Received disconnect from ::1 port 60768:11: disconnected by user buildbot # [ 48.052665] sshd-session[1183]: Disconnected from user root ::1 port 60768 buildbot # [ 48.054060] sshd-session[1180]: pam_unix(sshd:session): session closed for user root buildbot # [ 48.059304] systemd[1]: session-8.scope: Deactivated successfully. buildbot # [ 48.064236] systemd-logind[409]: Session 8 logged out. Waiting for processes to exit. buildbot # [ 48.067227] systemd-logind[409]: Removed session 8. buildbot # [ 48.074669] twistd[838]: 2026-07-05T06:01:32+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 36268 0 0100 3793 100 3793 0 0 35432 0 0100 3793 100 3793 0 0 34596 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.18 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 35759 0 0100 3793 100 3793 0 0 34787 0 0100 3793 100 3793 0 0 33975 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.19 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 37911 0 0100 3793 100 3793 0 0 36941 0 0100 3793 100 3793 0 0 36093 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.18 seconds) buildbot # [ 51.562208] twistd[838]: 2026-07-05T06:01:36+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake buildbot # [ 51.568160] twistd[838]: 2026-07-05T06:01:36+0000 [-] beginning configuration update buildbot # [ 51.572796] twistd[838]: 2026-07-05T06:01:36+0000 [-] Loading configuration from '/nix/store/lkfkk9wk4n6j6iafap6c6lgmx76rs7hz-master.cfg' buildbot # [ 51.641048] twistd[838]: 2026-07-05T06:01:36+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 51.674547] twistd[838]: 2026-07-05T06:01:36+0000 [-] adding 1 new schedulers, removing 0 buildbot # [ 51.794438] twistd[838]: 2026-07-05T06:01:36+0000 [-] configuration update complete (took 0.233 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 36902 0 0100 4079 100 4079 0 0 36039 0 0100 4079 100 4079 0 0 35293 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.19 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 46869 0 0100 4079 100 4079 0 0 45583 0 0100 4079 100 4079 0 0 44271 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.14 seconds) (finished: subtest: Nightly schedulers are created, in 5.02 seconds) subtest: Scheduled effect builder exists buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 178.2k 0 0100 2371 100 2371 0 0 149.6k 0 0100 2371 100 2371 0 0 128.9k 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.06 seconds) (finished: subtest: Scheduled effect builder exists, in 0.06 seconds) (finished: run the VM test script, in 53.19 seconds) test script finished in 53.24s cleanup kill QemuMachine (pid 12) buildbot # qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13) (finished: cleanup, in 0.25 seconds)