tribuchet: building on eliza Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.00 seconds) Test will time out and terminate in 3600 seconds run the VM test script buildbot: waiting for unit sshd.service buildbot: waiting for the VM to finish booting buildbot: starting vm buildbot # Disk image does not exist, creating the virtualisation disk image... buildbot: QEMU running (pid 45) buildbot # Formatting '/build/vm-state-buildbot/tmp.DXLBIh9WGu', fmt=raw size=1073741824 buildbot # mke2fs 1.47.4 (6-Mar-2025) buildbot # Discarding device blocks: 0/262144 done buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes buildbot # Filesystem UUID: 01afa7c9-5275-4d70-b169-294dfc7e4471 buildbot # Superblock backups stored on blocks: buildbot # 32768, 98304, 163840, 229376 buildbot # buildbot # Allocating group tables: 0/8 done buildbot # Writing inode tables: 0/8 done buildbot # Creating journal (8192 blocks): done buildbot # Writing superblocks and filesystem accounting information: 0/8 done buildbot # buildbot # Virtualisation disk image created. buildbot # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0xc00fac40] buildbot # [ 0.000000] Linux version 6.18.39 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT Sat Jul 18 14:53:38 UTC 2026 buildbot # [ 0.000000] KASLR enabled buildbot # [ 0.000000] random: crng init done buildbot # [ 0.000000] Machine model: linux,dummy-virt buildbot # [ 0.000000] efi: UEFI not found. buildbot # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT buildbot # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] NODE_DATA(0) allocated [mem 0x7fded740-0x7fdf0ebf] buildbot # [ 0.000000] Zone ranges: buildbot # [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] DMA32 empty buildbot # [ 0.000000] Normal empty buildbot # [ 0.000000] Device empty buildbot # [ 0.000000] Movable zone start for each node buildbot # [ 0.000000] Early memory node ranges buildbot # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc00000 buildbot # [ 0.000000] psci: probing for conduit method from DT. buildbot # [ 0.000000] psci: PSCIv1.3 detected in firmware. buildbot # [ 0.000000] psci: Using standard PSCI v0.2 function IDs buildbot # [ 0.000000] psci: Trusted OS migration not required buildbot # [ 0.000000] psci: SMC Calling Convention v1.1 buildbot # [ 0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003) buildbot # [ 0.000000] percpu: Embedded 76 pages/cpu s186392 r8192 d116712 u311296 buildbot # [ 0.000000] Detected PIPT I-cache on CPU0 buildbot # [ 0.000000] CPU features: detected: Address authentication (architected QARMA5 algorithm) buildbot # [ 0.000000] CPU features: detected: GICv3 CPU interface buildbot # [ 0.000000] CPU features: detected: Spectre-v4 buildbot # [ 0.000000] CPU features: detected: Spectre-BHB buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC03_CPU_38 buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC04_CPU_23 buildbot # [ 0.000000] alternatives: applying boot alternatives buildbot # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/sv2z66r1qnkr0wv4bmzkvx8mfp1nxvkv-nixos-system-buildbot-test/init regInfo=/nix/store/mx4vhc1yygr662dlfx9cqbacm8zn3v3x-closure-info/registration console=ttyAMA0,115200n8 console=tty0 buildbot # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/mx4vhc1yygr662dlfx9cqbacm8zn3v3x-closure-info/registration", will be passed to user space. buildbot # [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes buildbot # [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) buildbot # [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) buildbot # [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB buildbot # [ 0.000000] software IO TLB: area num 1. buildbot # [ 0.000000] software IO TLB: mapped [mem 0x000000007ca80000-0x000000007cb80000] (1MB) buildbot # [ 0.000000] Fallback order for Node 0: 0 buildbot # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 buildbot # [ 0.000000] Policy zone: DMA buildbot # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off buildbot # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 buildbot # [ 0.000000] allocated 2097152 bytes of page_ext buildbot # [ 0.000000] ftrace: allocating 74716 entries in 292 pages buildbot # [ 0.000000] ftrace: allocated 292 pages with 3 groups buildbot # [ 0.000000] rcu: Hierarchical RCU implementation. buildbot # [ 0.000000] rcu: RCU event tracing is enabled. buildbot # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. buildbot # [ 0.000000] Trampoline variant of Tasks RCU enabled. buildbot # [ 0.000000] Rude variant of Tasks RCU enabled. buildbot # [ 0.000000] Tracing variant of Tasks RCU enabled. buildbot # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. buildbot # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 buildbot # [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 buildbot # [ 0.000000] GICv3: 256 SPIs implemented buildbot # [ 0.000000] GICv3: 0 Extended SPIs implemented buildbot # [ 0.000000] Root IRQ handler: gic_handle_irq buildbot # [ 0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI buildbot # [ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=0 buildbot # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 buildbot # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @44ce0000 (indirect, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @44cf0000 (flat, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] GICv3: using LPI property table @0x0000000044d00000 buildbot # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000044d10000 buildbot # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. buildbot # [ 0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns buildbot # [ 0.000000] arch_timer: cp15 timer running at 1000.00MHz (virt). buildbot # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns buildbot # [ 0.000000] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns buildbot # [ 0.000029] arm-pv: using stolen time PV buildbot # [ 0.000388] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) buildbot # [ 0.000562] Console: colour dummy device 80x25 buildbot # [ 0.000570] printk: legacy console [tty0] enabled buildbot # [ 0.000746] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) buildbot # [ 0.000753] pid_max: default: 32768 minimum: 301 buildbot # [ 0.000832] LSM: initializing lsm=capability,landlock,yama,bpf,ima buildbot # [ 0.000971] landlock: Up and running. buildbot # [ 0.000974] Yama: becoming mindful. buildbot # [ 0.001397] LSM support for eBPF active buildbot # [ 0.001491] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.001513] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.002567] cacheinfo: Unable to detect cache hierarchy for CPU 0 buildbot # [ 0.003233] rcu: Hierarchical SRCU implementation. buildbot # [ 0.003237] rcu: Max phase no-delay instances is 1000. buildbot # [ 0.004439] fsl-mc MSI: its@8080000 domain created buildbot # [ 0.004529] EFI services will not be available. buildbot # [ 0.004609] smp: Bringing up secondary CPUs ... buildbot # [ 0.004617] smp: Brought up 1 node, 1 CPU buildbot # [ 0.004620] SMP: Total of 1 processors activated. buildbot # [ 0.004623] CPU: All CPU(s) started at EL1 buildbot # [ 0.004633] CPU features: detected: Branch Target Identification buildbot # [ 0.004640] CPU features: detected: ARMv8.4 Translation Table Level buildbot # [ 0.004643] CPU features: detected: Instruction cache invalidation not required for I/D coherence buildbot # [ 0.004647] CPU features: detected: Data cache clean to the PoU not required for I/D coherence buildbot # [ 0.004650] CPU features: detected: Common not Private translations buildbot # [ 0.004654] CPU features: detected: CRC32 instructions buildbot # [ 0.004656] CPU features: detected: Data cache clean to Point of Deep Persistence buildbot # [ 0.004660] CPU features: detected: Data cache clean to Point of Persistence buildbot # [ 0.004663] CPU features: detected: Data independent timing control (DIT) buildbot # [ 0.004666] CPU features: detected: E0PD buildbot # [ 0.004669] CPU features: detected: Enhanced Counter Virtualization buildbot # [ 0.004672] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) buildbot # [ 0.004675] CPU features: detected: Enhanced Virtualization Traps buildbot # [ 0.004678] CPU features: detected: Fine Grained Traps buildbot # [ 0.004682] CPU features: detected: Generic authentication (architected QARMA5 algorithm) buildbot # [ 0.004687] CPU features: detected: RCpc load-acquire (LDAPR) buildbot # [ 0.004690] CPU features: detected: LSE atomic instructions buildbot # [ 0.004693] CPU features: detected: Privileged Access Never buildbot # [ 0.004695] CPU features: detected: PMUv3 buildbot # [ 0.004698] CPU features: detected: RAS Extension Support buildbot # [ 0.004701] CPU features: detected: RASv1p1 Extension Support buildbot # [ 0.004704] CPU features: detected: Random Number Generator buildbot # [ 0.004706] CPU features: detected: Speculation barrier (SB) buildbot # [ 0.004709] CPU features: detected: Stage-2 Force Write-Back buildbot # [ 0.004712] CPU features: detected: TLB range maintenance instructions buildbot # [ 0.004717] CPU features: detected: Speculative Store Bypassing Safe (SSBS) buildbot # [ 0.004752] alternatives: applying system-wide alternatives buildbot # [ 0.007629] CPU features: detected: BBM Level 2 without TLB conflict abort buildbot # [ 0.007832] Memory: 894324K/1048576K available (24384K kernel code, 7086K rwdata, 26304K rodata, 4736K init, 1102K bss, 112944K reserved, 32768K cma-reserved) buildbot # [ 0.008195] devtmpfs: initialized buildbot # [ 0.009889] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.009913] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). buildbot # [ 0.010090] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL buildbot # [ 0.010094] 0 pages in range for non-PLT usage buildbot # [ 0.010095] 508320 pages in range for PLT usage buildbot # [ 0.010207] pinctrl core: initialized pinctrl subsystem buildbot # [ 0.010936] DMI not present or invalid. buildbot # [ 0.014056] NET: Registered PF_NETLINK/PF_ROUTE protocol family buildbot # [ 0.016739] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations buildbot # [ 0.016890] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations buildbot # [ 0.017047] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations buildbot # [ 0.017069] audit: initializing netlink subsys (disabled) buildbot # [ 0.017602] thermal_sys: Registered thermal governor 'fair_share' buildbot # [ 0.017604] thermal_sys: Registered thermal governor 'bang_bang' buildbot # [ 0.017608] thermal_sys: Registered thermal governor 'step_wise' buildbot # [ 0.017610] thermal_sys: Registered thermal governor 'user_space' buildbot # [ 0.017613] thermal_sys: Registered thermal governor 'power_allocator' buildbot # [ 0.017637] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1 buildbot # [ 0.017646] cpuidle: using governor ladder buildbot # [ 0.017652] cpuidle: using governor menu buildbot # [ 0.017847] hw-breakpoint: found 16 breakpoint and 4 watchpoint registers. buildbot # [ 0.017863] ASID allocator initialised with 65536 entries buildbot # [ 0.019006] Serial: AMBA PL011 UART driver buildbot # [ 0.024157] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 buildbot # [ 0.024274] printk: console [ttyAMA0] enabled buildbot # [ 0.151020] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages buildbot # [ 0.151039] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page buildbot # [ 0.151044] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages buildbot # [ 0.151049] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page buildbot # [ 0.151053] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages buildbot # [ 0.151057] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page buildbot # [ 0.151062] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages buildbot # [ 0.151066] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page buildbot # [ 0.158616] fbcon: Taking over console buildbot # [ 0.158631] ACPI: Interpreter disabled. buildbot # [ 0.167121] iommu: Default domain type: Translated buildbot # [ 0.167131] iommu: DMA domain TLB invalidation policy: strict mode buildbot # [ 0.168965] SCSI subsystem initialized buildbot # [ 0.169645] usbcore: registered new interface driver usbfs buildbot # [ 0.169668] usbcore: registered new interface driver hub buildbot # [ 0.169691] usbcore: registered new device driver usb buildbot # [ 0.169942] pps_core: LinuxPPS API ver. 1 registered buildbot # [ 0.169948] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti buildbot # [ 0.169958] PTP clock support registered buildbot # [ 0.169997] EDAC MC: Ver: 3.0.0 buildbot # [ 0.174858] scmi_core: SCMI protocol bus registered buildbot # [ 0.175838] FPGA manager framework buildbot # [ 0.176853] vgaarb: loaded buildbot # [ 0.177504] clocksource: Switched to clocksource arch_sys_counter buildbot # [ 0.177954] VFS: Disk quotas dquot_6.6.0 buildbot # [ 0.177985] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) buildbot # [ 0.180429] netfs: FS-Cache loaded buildbot # [ 0.180543] pnp: PnP ACPI: disabled buildbot # [ 0.186516] NET: Registered PF_INET protocol family buildbot # [ 0.186682] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) buildbot # [ 0.215638] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.215681] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) buildbot # [ 0.215704] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) buildbot # [ 0.215745] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) buildbot # [ 0.215821] TCP: Hash tables configured (established 8192 bind 8192) buildbot # [ 0.215902] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) buildbot # [ 0.215991] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.216039] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.216114] NET: Registered PF_UNIX/PF_LOCAL protocol family buildbot # [ 0.216164] NET: Registered PF_XDP protocol family buildbot # [ 0.216182] PCI: CLS 0 bytes, default 64 buildbot # [ 0.216423] Trying to unpack rootfs image as initramfs... buildbot # [ 0.231414] kvm [1]: HYP mode not available buildbot # [ 0.322106] Initialise system trusted keyrings buildbot # [ 0.322870] workingset: timestamp_bits=42 max_order=18 bucket_order=0 buildbot # [ 0.324210] squashfs: version 4.0 (2009/01/31) Phillip Lougher buildbot # [ 0.325002] 9p: Installing v9fs 9p2000 file system support buildbot # [ 0.353798] Key type asymmetric registered buildbot # [ 0.353820] Asymmetric key parser 'x509' registered buildbot # [ 0.353887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) buildbot # [ 0.356046] io scheduler mq-deadline registered buildbot # [ 0.356057] io scheduler kyber registered buildbot # [ 0.365657] pl061_gpio 9030000.pl061: PL061 GPIO chip registered buildbot # [ 0.367051] ledtrig-cpu: registered to indicate activity on CPUs buildbot # [ 0.367418] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: buildbot # [ 0.367443] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 buildbot # [ 0.367457] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 buildbot # [ 0.367466] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 buildbot # [ 0.367487] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits buildbot # [ 0.367510] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] buildbot # [ 0.367582] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 buildbot # [ 0.367592] pci_bus 0000:00: root bus resource [bus 00-ff] buildbot # [ 0.367598] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] buildbot # [ 0.367603] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] buildbot # [ 0.367608] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] buildbot # [ 0.367700] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint buildbot # [ 0.368159] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.368352] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.368369] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.368401] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.368418] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.368884] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.369069] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.369085] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.369115] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.389369] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.390588] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.390607] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.390638] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.391110] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.391298] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.391315] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.391345] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.391811] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.392007] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.392024] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.392054] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.392516] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint buildbot # [ 0.392702] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] buildbot # [ 0.392719] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.392749] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.393206] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.393392] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.393409] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.393439] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.393456] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.414033] pci 0000:00:08.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint buildbot # [ 0.414241] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.414272] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.414739] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint buildbot # [ 0.414929] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.414960] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.415355] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint buildbot # [ 0.415540] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] buildbot # [ 0.415803] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint buildbot # [ 0.416071] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.416089] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.416120] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.416584] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.416771] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.416788] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.416818] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.417405] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned buildbot # [ 0.417418] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned buildbot # [ 0.417424] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned buildbot # [ 0.417471] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned buildbot # [ 0.441582] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned buildbot # [ 0.441645] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned buildbot # [ 0.441695] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned buildbot # [ 0.441745] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned buildbot # [ 0.441795] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned buildbot # [ 0.441846] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned buildbot # [ 0.441896] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned buildbot # [ 0.441946] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned buildbot # [ 0.442080] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned buildbot # [ 0.442131] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned buildbot # [ 0.442155] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned buildbot # [ 0.442178] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned buildbot # [ 0.442201] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned buildbot # [ 0.442224] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned buildbot # [ 0.442247] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned buildbot # [ 0.442273] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned buildbot # [ 0.442297] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned buildbot # [ 0.442320] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned buildbot # [ 0.442343] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned buildbot # [ 0.442368] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned buildbot # [ 0.442391] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned buildbot # [ 0.442414] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned buildbot # [ 0.442437] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned buildbot # [ 0.442459] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned buildbot # [ 0.442482] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned buildbot # [ 0.442505] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned buildbot # [ 0.442528] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned buildbot # [ 0.442551] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned buildbot # [ 0.442574] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned buildbot # [ 0.442597] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned buildbot # [ 0.442626] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] buildbot # [ 0.442636] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] buildbot # [ 0.442641] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] buildbot # [ 0.443837] pci 0000:00:0a.0: enabling device (0000 -> 0002) buildbot # [ 0.493248] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) buildbot # [ 0.502833] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) buildbot # [ 0.514076] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) buildbot # [ 0.516257] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) buildbot # [ 0.518197] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) buildbot # [ 0.520248] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) buildbot # [ 0.530594] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) buildbot # [ 0.532727] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) buildbot # [ 0.544302] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) buildbot # [ 0.546913] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) buildbot # [ 0.549028] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) buildbot # [ 0.566328] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled buildbot # [ 0.568884] msm_serial: driver initialized buildbot # [ 0.569034] SuperH (H)SCI(F) driver initialized buildbot # [ 0.569088] STM32 USART driver initialized buildbot # [ 0.600442] loop: module loaded buildbot # [ 0.600612] virtio_blk virtio5: 1/0/0 default/read/poll queues buildbot # [ 0.601303] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) buildbot # [ 0.606024] megasas: 07.734.00.00-rc1 buildbot # [ 0.606700] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] buildbot # [ 0.617552] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.617575] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.619181] Using buffer write method buildbot # [ 0.619251] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] buildbot # [ 0.633540] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.633564] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.635481] Using buffer write method buildbot # [ 0.635508] Concatenating MTD devices: buildbot # [ 0.635512] (0): "0.flash" buildbot # [ 0.635516] (1): "0.flash" buildbot # [ 0.635520] into device "0.flash" buildbot # [ 0.863117] Freeing initrd memory: 26216K buildbot # [ 0.869075] tun: Universal TUN/TAP device driver, 1.6 buildbot # [ 0.872851] thunder_xcv, ver 1.0 buildbot # [ 0.872891] thunder_bgx, ver 1.0 buildbot # [ 0.872913] nicpf, ver 1.0 buildbot # [ 0.873479] e1000: Intel(R) PRO/1000 Network Driver buildbot # [ 0.873487] e1000: Copyright (c) 1999-2006 Intel Corporation. buildbot # [ 0.876131] e1000e: Intel(R) PRO/1000 Network Driver buildbot # [ 0.876144] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. buildbot # [ 0.876183] igb: Intel(R) Gigabit Ethernet Network Driver buildbot # [ 0.876189] igb: Copyright (c) 2007-2014 Intel Corporation. buildbot # [ 0.876213] igbvf: Intel(R) Gigabit Virtual Function Network Driver buildbot # [ 0.876219] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. buildbot # [ 0.876367] sky2: driver version 1.30 buildbot # [ 0.882788] usbcore: registered new interface driver usb-storage buildbot # [ 0.882905] usbcore: registered new interface driver usbserial_generic buildbot # [ 0.882920] usbserial: USB Serial support registered for generic buildbot # [ 0.883507] hv_vmbus: registering driver hyperv_keyboard buildbot # [ 0.884835] ehci-pci 0000:00:0a.0: EHCI Host Controller buildbot # [ 0.884867] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 buildbot # [ 0.885069] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 buildbot # [ 0.890675] rtc-pl031 9010000.pl031: registered as rtc0 buildbot # [ 0.890701] rtc-pl031 9010000.pl031: setting system clock to 2026-07-19T05:23:36 UTC (1784438616) buildbot # [ 0.891063] i2c_dev: i2c /dev entries driver buildbot # [ 0.894110] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 buildbot # [ 0.894436] hub 1-0:1.0: USB hub found buildbot # [ 0.894460] hub 1-0:1.0: 6 ports detected buildbot # [ 0.898583] sdhci: Secure Digital Host Controller Interface driver buildbot # [ 0.898592] sdhci: Copyright(c) Pierre Ossman buildbot # [ 0.898859] Synopsys Designware Multimedia Card Interface Driver buildbot # [ 0.899229] sdhci-pltfm: SDHCI platform and OF driver helper buildbot # [ 0.900866] hid: raw HID events driver (C) Jiri Kosina buildbot # [ 0.901104] usbcore: registered new interface driver usbhid buildbot # [ 0.901111] usbhid: USB HID core driver buildbot # [ 0.940329] hw perfevents: enabled with armv8_pmuv3 PMU driver, 11 (0,800003ff) counters available buildbot # [ 0.941869] drop_monitor: Initializing network drop monitor service buildbot # [ 0.941996] NET: Registered PF_INET6 protocol family buildbot # [ 0.945055] Segment Routing with IPv6 buildbot # [ 0.945076] In-situ OAM (IOAM) with IPv6 buildbot # [ 0.945106] NET: Registered PF_PACKET protocol family buildbot # [ 0.946840] 9pnet: Installing 9P2000 support buildbot # [ 0.949099] Key type dns_resolver registered buildbot # [ 0.956197] registered taskstats version 1 buildbot # [ 0.956361] Loading compiled-in X.509 certificates buildbot # [ 0.964904] Demotion targets for Node 0: null buildbot # [ 0.965035] Key type .fscrypt registered buildbot # [ 0.965042] Key type fscrypt-provisioning registered buildbot # [ 0.965141] ima: No TPM chip found, activating TPM-bypass! buildbot # [ 0.965160] ima: Allocated hash algorithm: sha1 buildbot # [ 0.965183] ima: No architecture policies found buildbot # [ 0.969440] input: gpio-keys as /devices/platform/gpio-keys/input/input0 buildbot # [ 0.986368] clk: Disabling unused clocks buildbot # [ 0.986390] PM: genpd: Disabling unused power domains buildbot # [ 0.990785] Freeing unused kernel memory: 4736K buildbot # [ 0.990988] Run /init as init process buildbot # [ 1.007623] systemd[1]: Successfully made /usr/ read-only. buildbot # [ 1.161585] usb 1-1: new high-speed USB device number 2 using ehci-pci buildbot # [ 1.313760] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 buildbot # [ 1.342534] systemd[1]: systemd 261 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 1.354729] systemd[1]: Detected virtualization qemu. buildbot # [ 1.356828] systemd[1]: Detected architecture arm64. buildbot # [ 1.358852] systemd[1]: Running in initrd. buildbot # [ 1.361347] systemd[1]: Initializing machine ID from random generator. buildbot # [ 1.364355] systemd[1]: Hostname set to . buildbot # [ 1.409800] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 buildbot # [ 1.529589] usb 1-2: new high-speed USB device number 3 using ehci-pci buildbot # [ 1.664312] systemd[1]: bpf-restrict-fs: LSM BPF program attached buildbot # [ 1.690081] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 buildbot # [ 1.695835] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 buildbot # [ 1.780731] systemd[1]: Queued start job for default target Initrd Default Target. buildbot # [ 1.791996] systemd[1]: Created slice Slice /system/modprobe. buildbot # [ 1.793262] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 1.794776] systemd[1]: Expecting device /dev/disk/by-label/nixos... buildbot # [ 1.794812] systemd[1]: Reached target Path Units. buildbot # [ 1.794832] systemd[1]: Reached target Slice Units. buildbot # [ 1.794852] systemd[1]: Reached target Swaps. buildbot # [ 1.794872] systemd[1]: Reached target Timer Units. buildbot # [ 1.795067] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 1.795233] systemd[1]: Listening on Journal Socket (/dev/log). buildbot # [ 1.795378] systemd[1]: Listening on Journal Sockets. buildbot # [ 1.795514] systemd[1]: Listening on udev Control Socket. buildbot # [ 1.795642] systemd[1]: Listening on udev Kernel Socket. buildbot # [ 1.795665] systemd[1]: Reached target Socket Units. buildbot # [ 1.807264] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 1.814321] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 1.815563] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 1.825699] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 1.833809] systemd[1]: Starting Journal Service... buildbot # [ 1.859319] systemd[1]: Starting Load Kernel Modules... buildbot # [ 1.859425] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os buildbot # [ 1.879784] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 1.881378] systemd-journald[73]: Collecting audit messages is disabled. buildbot # [ 1.893669] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 1.894500] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 1.894777] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 1.895039] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 1.913849] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 1.941482] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. buildbot # [ 1.954109] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 1.956461] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 1.961757] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev buildbot # [ 1.966239] [drm] pci: virtio-gpu-pci detected at 0000:00:08.0 buildbot # [ 1.966470] [drm] features: -virgl +edid -resource_blob -host_visible buildbot # [ 1.966479] [drm] features: -context_init buildbot # [ 1.967187] [drm] number of scanouts: 1 buildbot # [ 1.967206] [drm] number of cap sets: 0 buildbot # [ 1.988273] virtio-pci 0000:00:08.0: [drm] Registered 1 planes with drm panic buildbot # [ 1.988295] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:08.0 on minor 0 buildbot # [ 1.994115] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 1.994391] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 1.994417] systemd[1]: Reached target Local File Systems. buildbot # [ 2.005976] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 2.025754] Console: switching to colour frame buffer device 160x50 buildbot # [ 2.032117] virtio-pci 0000:00:08.0: [drm] fb0: virtio_gpudrmfb frame buffer device buildbot # [ 2.058722] systemd[1]: Finished Load Kernel Modules. buildbot # [ 2.065879] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 2.064300] systemd-modules-load[75]: Inserted module 'dm_mod' buildbot # [ 2.065391] systemd-modules-load[75]: Module 'virtio_balloon' is built in buildbot # [ 2.066530] systemd-modules-load[75]: Module 'virtio_console' is built in buildbot # [ 2.067654] systemd-modules-load[75]: Inserted module 'virtio_gpu' buildbot # [ 2.089670] systemd[1]: Started Journal Service. buildbot # [ 2.084464] systemd-modules-load[75]: Module 'virtio_rng' is built in buildbot # [ 2.096147] systemd[1]: Starting Create System Files and Directories... buildbot # [ 2.100373] systemd-udevd[79]: Using default interface naming scheme 'v261'. buildbot # [ 2.103034] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 2.137840] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 2.139620] systemd[1]: Finished Create System Files and Directories. buildbot # [ 2.192818] systemd[1]: Starting Virtual Console Setup... buildbot # [ 2.240418] systemd-vconsole-setup[102]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 2.243791] systemd[1]: Finished Virtual Console Setup. buildbot # [ 2.831295] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 2.832608] systemd[1]: Reached target System Initialization. buildbot # [ 2.833440] systemd[1]: Reached target Basic System. buildbot # [ 2.963801] (udev-worker)[93]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 3.001334] (udev-worker)[93]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 3.004485] (udev-worker)[98]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 3.064706] systemd[1]: Found device /dev/disk/by-label/nixos. buildbot # [ 3.068217] systemd[1]: Reached target Initrd Root Device. buildbot # [ 3.072097] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... buildbot # [ 3.123919] systemd-fsck[110]: nixos: clean, 12/65536 files, 13019/262144 blocks buildbot # [ 3.130113] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. buildbot # [ 3.143823] systemd[1]: Mounting /sysroot... buildbot # [ 3.183525] EXT4-fs (vda): mounted filesystem 01afa7c9-5275-4d70-b169-294dfc7e4471 r/w with ordered data mode. Quota mode: none. buildbot # [ 3.175025] systemd[1]: Mounted /sysroot. buildbot # [ 3.180151] systemd[1]: Reached target Initrd Root File System. buildbot # [ 3.181668] systemd[1]: Starting Mountpoints Configured in the Real Root... buildbot # [ 3.203360] systemd-sysroot-fstab-check[119]: /sysroot should be mounted in the initrd, will request daemon-reload. buildbot # [ 3.208269] systemd[1]: Reload requested from client PID 119 ('systemd-sysroot') (unit initrd-parse-etc.service)... buildbot # [ 3.213494] systemd[1]: Reloading... buildbot # [ 3.416952] systemd[1]: Reloading finished in 204 ms. buildbot # [ 3.447192] systemd-sysroot-fstab-check[119]: Requesting initrd-fs.target/start/replace... buildbot # [ 3.453660] systemd-sysroot-fstab-check[119]: Requesting swap.target/start/replace... buildbot # [ 3.460104] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 3.464624] systemd[1]: initrd-parse-etc.service: Deactivated successfully. buildbot # [ 3.466609] systemd[1]: Finished Mountpoints Configured in the Real Root. buildbot # [ 3.467808] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. buildbot # [ 3.487814] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 3.489463] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 3.881982] systemd[1]: Mounting /sysroot/nix/.ro-store... buildbot # [ 3.899337] systemd[1]: Mounting /sysroot/nix/.rw-store... buildbot # [ 3.919279] systemd[1]: Mounting /sysroot/run... buildbot # [ 3.929258] systemd[1]: Mounting /sysroot/tmp/shared... buildbot # [ 3.949677] systemd[1]: Mounting /sysroot/tmp/xchg... buildbot # [ 3.958847] systemd[1]: Mounted /sysroot/nix/.ro-store. buildbot # [ 3.961647] systemd[1]: Mounted /sysroot/nix/.rw-store. buildbot # [ 3.988369] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.991941] systemd[1]: Mounted /sysroot/run. buildbot # [ 4.018152] systemd[1]: Mounted /sysroot/tmp/xchg. buildbot # [ 4.033258] systemd[1]: Mounted /sysroot/tmp/shared. buildbot # [ 4.035841] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 4.038779] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 4.312830] (udev-worker)[98]: mtd0ro: Failed to find and pin callout binary "/nix/store/99bh37dhcwpwqmr8lvqjf3409skrrg31-systemd-261/lib/udev/mtd_probe": No such file or directory buildbot # [ 4.319772] (udev-worker)[98]: mtd0ro: /nix/store/99bh37dhcwpwqmr8lvqjf3409skrrg31-systemd-261/lib/udev/rules.d/75-probe_mtd.rules:5 IMPORT{program}="mtd_probe $devnode": Failed to execute "mtd_probe /dev/mtd0ro", ignoring: No such file or directory buildbot # [ 4.347308] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 4.352791] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 4.353889] systemd[1]: Stopping Virtual Console Setup... buildbot # [ 4.354738] systemd[1]: Starting Virtual Console Setup... buildbot # [ 4.365925] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 4.368146] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 4.371419] systemd[1]: Starting Virtual Console Setup... buildbot # [ 4.389312] systemd-vconsole-setup[154]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 4.392800] systemd[1]: Finished Virtual Console Setup. buildbot # [ 4.883101] systemd[1]: Mounting /sysroot/nix/store... buildbot # [ 4.940875] systemd[1]: Mounted /sysroot/nix/store. buildbot # [ 4.944132] systemd[1]: Reached target Initrd File Systems. buildbot # [ 4.951330] systemd[1]: Starting Find NixOS closure... buildbot # [ 4.960413] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... buildbot # [ 5.009773] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. buildbot # [ 5.014954] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. buildbot # [ 5.027904] systemd[1]: Finished Find NixOS closure. buildbot # [ 5.031596] systemd[1]: Reached target Initrd Default Target. buildbot # [ 5.036432] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... buildbot # [ 5.061105] systemd[1]: Stopped target Initrd Default Target. buildbot # [ 5.063334] systemd[1]: Stopped target Basic System. buildbot # [ 5.065038] systemd[1]: Stopped target Initrd Root Device. buildbot # [ 5.068404] systemd[1]: Stopped target Path Units. buildbot # [ 5.070018] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. buildbot # [ 5.073291] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. buildbot # [ 5.080153] systemd[1]: Stopped target Slice Units. buildbot # [ 5.081145] systemd[1]: Stopped target Socket Units. buildbot # [ 5.082071] systemd[1]: Stopped target System Initialization. buildbot # [ 5.083115] systemd[1]: Stopped target Swaps. buildbot # [ 5.084837] systemd[1]: Stopped target Timer Units. buildbot # [ 5.086214] systemd[1]: dbus.socket: Deactivated successfully. buildbot # [ 5.091641] systemd[1]: Closed D-Bus System Message Bus Socket. buildbot # [ 5.092753] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. buildbot # [ 5.093970] systemd[1]: Stopped Find NixOS closure. buildbot # [ 5.094797] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 5.095806] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 5.105489] systemd[1]: systemd-sysctl.service: Deactivated successfully. buildbot # [ 5.106571] systemd[1]: Stopped Apply Kernel Variables. buildbot # [ 5.107481] systemd[1]: systemd-modules-load.service: Deactivated successfully. buildbot # [ 5.118720] systemd[1]: Stopped Load Kernel Modules. buildbot # [ 5.119564] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. buildbot # [ 5.126133] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. buildbot # [ 5.132320] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. buildbot # [ 5.133610] systemd[1]: Stopped Create System Files and Directories. buildbot # [ 5.135900] systemd[1]: Stopped target Local File Systems. buildbot # [ 5.138168] systemd[1]: Stopped target Preparation for Local File Systems. buildbot # [ 5.140249] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. buildbot # [ 5.142482] systemd[1]: Stopped Coldplug All udev Devices. buildbot # [ 5.143552] systemd[1]: Stopping Rule-based Manager for Device Events and Files... buildbot # [ 5.148410] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 5.149483] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 5.150240] systemd[1]: initrd-cleanup.service: Deactivated successfully. buildbot # [ 5.151209] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. buildbot # [ 5.152823] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 5.153872] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 5.154723] systemd[1]: systemd-udevd.service: Deactivated successfully. buildbot # [ 5.155844] systemd[1]: Stopped Rule-based Manager for Device Events and Files. buildbot # [ 5.157057] systemd[1]: systemd-udevd.service: Consumed 1.364s CPU time over 3.143s wall clock time, 21.8M memory peak. buildbot # [ 5.158525] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 5.159556] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 5.163899] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. buildbot # [ 5.168399] systemd[1]: Closed udev Control Socket. buildbot # [ 5.169280] systemd[1]: Starting Cleanup udev Database... buildbot # [ 5.170212] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. buildbot # [ 5.172186] systemd[1]: Stopped Create Static Device Nodes in /dev. buildbot # [ 5.176123] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. buildbot # [ 5.177282] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. buildbot # [ 5.178263] systemd[1]: kmod-static-nodes.service: Deactivated successfully. buildbot # [ 5.180177] systemd[1]: Stopped Create List of Static Device Nodes. buildbot # [ 5.206678] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. buildbot # [ 5.207829] systemd[1]: Finished Cleanup udev Database. buildbot # [ 5.212615] systemd[1]: Reached target Switch Root. buildbot # [ 5.213357] systemd[1]: Starting NixOS Activation... buildbot # [ 5.360901] initrd-nixos-activation-start[179]: booting system configuration /nix/store/sv2z66r1qnkr0wv4bmzkvx8mfp1nxvkv-nixos-system-buildbot-test buildbot # [ 5.420141] initrd-nixos-activation-start[179]: running activation script... buildbot # [ 5.809193] initrd-nixos-activation-start[202]: setting up /etc... buildbot # [ 6.068236] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. buildbot # [ 6.071092] systemd[1]: Finished NixOS Activation. buildbot # [ 6.076252] systemd[1]: Starting Switch Root... buildbot # [ 6.095499] systemd[1]: Switching root. buildbot # [ 6.276216] systemd-journald[73]: Received SIGTERM from PID 1 (systemd). buildbot # [ 6.866152] systemd[1]: systemd 261 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 6.878527] systemd[1]: Detected virtualization qemu. buildbot # [ 6.881384] systemd[1]: Detected architecture arm64. buildbot # [ 6.884864] systemd[1]: Detected first boot. buildbot # [ 6.891312] systemd[1]: Initializing machine ID from random generator. buildbot # [ 7.202069] systemd[1]: bpf-restrict-fs: LSM BPF program attached buildbot # [ 7.367142] NET: Registered PF_VSOCK protocol family buildbot # [ 7.375652] Guest personality initialized and is inactive buildbot # [ 7.377667] VMCI host device registered (name=vmci, major=10, minor=261) buildbot # [ 7.377707] Initialized host personality buildbot # [ 7.437290] systemd[1]: Applying preset policy. buildbot # [ 7.922399] systemd[1]: Populated /etc with preset unit settings. buildbot # [ 8.427414] systemd[1]: initrd-switch-root.service: Deactivated successfully. buildbot # [ 8.428746] systemd[1]: Stopped initrd-switch-root.service. buildbot # [ 8.432029] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. buildbot # [ 8.435884] systemd[1]: Created slice Slice /system/getty. buildbot # [ 8.438313] systemd[1]: Created slice User and Session Slice. buildbot # [ 8.439608] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 8.441392] systemd[1]: Started Forward Password Requests to Wall Directory Watch. buildbot # [ 8.443044] systemd[1]: Expecting device /dev/hvc0... buildbot # [ 8.444439] systemd[1]: Expecting device /dev/ttyAMA0... buildbot # [ 8.445997] systemd[1]: Reached target Local Encrypted Volumes. buildbot # [ 8.448266] systemd[1]: Stopped target initrd-fs.target. buildbot # [ 8.449306] systemd[1]: Stopped target initrd-root-fs.target. buildbot # [ 8.450817] systemd[1]: Stopped target initrd-switch-root.target. buildbot # [ 8.453080] systemd[1]: Reached target Virtual Machines and Containers. buildbot # [ 8.454386] systemd[1]: Reached target Path Units. buildbot # [ 8.456421] systemd[1]: Reached target Remote File Systems. buildbot # [ 8.457482] systemd[1]: Reached target Slice Units. buildbot # [ 8.458883] systemd[1]: Reached target Swaps. buildbot # [ 8.462850] systemd[1]: Listening on Query the User Interactively for a Password. buildbot # [ 8.467440] systemd[1]: Listening on Process Core Dump Socket. buildbot # [ 8.471263] systemd[1]: Listening on Credential Encryption/Decryption. buildbot # [ 8.475042] systemd[1]: Listening on Factory Reset Management. buildbot # [ 8.476297] systemd[1]: Listening on Hostname Service Socket. buildbot # [ 8.482047] systemd[1]: Starting Journal Log Access Socket... buildbot # [ 8.483646] systemd[1]: Listening on Journal Audit Socket. buildbot # [ 8.487686] systemd[1]: Listening on Console Output Muting Service Socket. buildbot # [ 8.489203] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. buildbot # [ 8.490828] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os buildbot # [ 8.493670] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 8.504326] systemd[1]: Listening on Disk Repartitioning Service Socket. buildbot # [ 8.506484] systemd[1]: Listening on udev Control Socket. buildbot # [ 8.507659] systemd[1]: Listening on udev Varlink Socket. buildbot # [ 8.512299] systemd[1]: Mounting Huge Pages File System... buildbot # [ 8.516533] systemd[1]: Mounting POSIX Message Queue File System... buildbot # [ 8.523753] systemd[1]: Mounting Kernel Debug File System... buildbot # [ 8.533755] systemd[1]: Mounting Kernel Trace File System... buildbot # [ 8.549323] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 8.556055] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 8.558498] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 8.572802] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 8.574920] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm buildbot # [ 8.583560] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore buildbot # [ 8.596079] systemd[1]: Starting Load Kernel Module fuse... buildbot # [ 8.597655] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 buildbot # [ 8.642094] systemd[1]: Starting Journal Service... buildbot # [ 8.690061] systemd[1]: Starting Load Kernel Modules... buildbot # [ 8.711307] fuse: init (API version 7.45) buildbot # [ 8.726242] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... buildbot # [ 8.747949] systemd-journald[274]: Collecting audit messages is enabled. buildbot # [ 8.754478] systemd[1]: Starting Remount Root and Kernel File Systems... buildbot # [ 8.757038] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os buildbot # [ 8.751276] systemd[1]: Queued start job for default target Multi-User System. buildbot # [ 8.752610] systemd[1]: systemd-journald.service: Deactivated successfully. buildbot # [ 8.775065] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 8.776398] systemd-modules-load[275]: Module 'atkbd' is built in buildbot # [ 8.791416] systemd[1]: Started Journal Service. buildbot # [ 8.780904] systemd-modules-load[275]: Module 'loop' is built in buildbot # [ 8.796055] systemd[1]: Listening on Journal Log Access Socket. buildbot # [ 8.798326] systemd[1]: Mounted Huge Pages File System. buildbot # [ 8.803169] systemd[1]: Mounted POSIX Message Queue File System. buildbot # [ 8.808426] systemd[1]: Mounted Kernel Debug File System. buildbot # [ 8.814859] systemd[1]: Mounted Kernel Trace File System. buildbot # [ 8.815735] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 8.824393] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 8.829429] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 8.834420] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 8.840367] systemd[1]: modprobe@fuse.service: Deactivated successfully. buildbot # [ 8.841355] systemd[1]: Finished Load Kernel Module fuse. buildbot # [ 8.842192] systemd-modules-load[275]: Inserted module 'tls' buildbot # [ 8.843029] systemd[1]: Finished Load Kernel Modules. buildbot # [ 8.861627] EXT4-fs (vda): re-mounted 01afa7c9-5275-4d70-b169-294dfc7e4471. buildbot # [ 8.854327] systemd[1]: Mounting FUSE Control File System... buildbot # [ 8.861533] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 8.865377] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 8.890457] systemd[1]: Finished Remount Root and Kernel File Systems. buildbot # [ 8.905972] systemd-oomd[277]: No swap; memory pressure usage will be degraded buildbot # [ 8.917675] systemd[1]: Listening on Disk Image Download Service Socket. buildbot # [ 8.932823] systemd[1]: Starting Flush Journal to Persistent Storage... buildbot # [ 8.938037] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore buildbot # [ 8.956107] systemd[1]: Starting Load/Save OS Random Seed... buildbot # [ 8.960173] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os buildbot # [ 8.964473] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. buildbot # [ 8.999581] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 9.012935] systemd[1]: Mounted FUSE Control File System. buildbot # [ 9.055011] systemd-journald[274]: Received client request to flush runtime journal. buildbot # [ 9.095314] systemd[1]: Finished Load/Save OS Random Seed. buildbot # [ 9.096395] systemd[1]: Reached target First Boot Complete. buildbot # [ 9.097226] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 9.098252] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 9.105169] systemd[1]: Finished Flush Journal to Persistent Storage. buildbot # [ 9.178073] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 9.179094] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 9.181450] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 9.286252] systemd-udevd[307]: Using default interface naming scheme 'v261'. buildbot # [ 9.414090] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 9.421029] systemd[1]: Mounting /run/wrappers... buildbot # [ 9.480444] systemd[1]: Mounted /run/wrappers. buildbot # [ 9.481276] systemd[1]: Reached target Local File Systems. buildbot # [ 9.483865] systemd[1]: Listening on Boot Loader Control Service Socket. buildbot # [ 9.489737] systemd[1]: Starting register-nix-paths.service... buildbot # [ 9.505031] systemd[1]: Starting Create SUID/SGID Wrappers... buildbot # [ 9.506363] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. buildbot # [ 9.523549] systemd[1]: Starting Save Transient machine-id to Disk... buildbot # [ 9.528087] systemd[1]: Starting Create System Files and Directories... buildbot # [ 9.629124] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. buildbot # [ 9.633211] systemd[1]: Finished Save Transient machine-id to Disk. buildbot # [ 9.696674] systemd[1]: Finished Create System Files and Directories. buildbot # [ 9.711837] systemd[1]: Starting Rebuild Journal Catalog... buildbot # [ 9.717821] systemd[1]: Starting Record System Boot/Shutdown in UTMP... buildbot # [ 9.809056] systemd[1]: Finished Record System Boot/Shutdown in UTMP. buildbot # [ 9.858317] systemd[1]: Finished Rebuild Journal Catalog. buildbot # [ 9.866845] systemd[1]: Starting Update is Completed... buildbot # [ 9.926422] systemd[1]: Finished Update is Completed. buildbot # [ 10.377121] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. buildbot # [ 10.380394] systemd[1]: Finished Create SUID/SGID Wrappers. buildbot # [ 10.432850] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 10.488584] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 10.611637] systemd[1]: Finished register-nix-paths.service. buildbot # [ 10.614215] systemd[1]: Reached target System Initialization. buildbot # [ 10.619046] systemd[1]: Started Discard unused filesystem blocks once a week. buildbot # [ 10.622238] systemd[1]: Started Daily Cleanup of Temporary Directories. buildbot # [ 10.626708] systemd[1]: Reached target Timer Units. buildbot # [ 10.628549] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 10.631665] systemd[1]: Listening on Nix Daemon Socket. buildbot # [ 10.635037] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). buildbot # [ 10.639905] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. buildbot # [ 10.644543] systemd[1]: Reached target Socket Units. buildbot # [ 10.645989] systemd[1]: Reached target Basic System. buildbot # [ 10.648903] systemd[1]: Starting Import lastlog data into lastlog2 database... buildbot # [ 10.653123] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 10.655582] systemd[1]: Starting Post-Boot Actions... buildbot # [ 10.659193] systemd[1]: Started Reset console on configuration changes. buildbot # [ 10.681332] systemd[1]: Starting resolvconf update... buildbot # [ 10.682908] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met. buildbot # [ 10.738897] systemd[1]: Starting D-Bus System Message Bus... buildbot # [ 10.760068] systemd[1]: Finished Post-Boot Actions. buildbot # [ 10.797928] nsncd[394]: Jul 19 05:23:46.419 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 10.808757] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 10.816184] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. buildbot # [ 10.818468] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 10.825370] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 10.842833] systemd[1]: Starting User Login Management... buildbot # [ 10.846280] systemd[1]: Condition check resulted in /dev/ttyAMA0 being skipped. buildbot # [ 10.854225] systemd[1]: Started backdoor.service. buildbot # [ 10.880162] systemd[1]: Finished Import lastlog data into lastlog2 database. buildbot # connecting to host... buildbot # [ 10.980495] dbus-broker-launch[399]: Looking up NSS user entry for 'systemd-timesync'... buildbot # [ 11.002229] dbus-broker-launch[399]: NSS returned no entry for 'systemd-timesync' buildbot # [ 11.009278] dbus-broker-launch[399]: Invalid user-name in /nix/store/8ifr1n03hxc57l7n5ids9syfyrbnsfsc-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" buildbot: Guest shell says: b'Spawning backdoor root shell...\n' buildbot: connected to guest root shell buildbot: (connecting took 11.34 seconds) buildbot: (finished: waiting for the VM to finish booting, in 11.80 seconds) buildbot # [ 11.052326] systemd[1]: Started D-Bus System Message Bus. buildbot # [ 11.087764] systemd-logind[416]: New seat seat0. buildbot # [ 11.103782] dbus-broker-launch[399]: Ready buildbot # [ 11.108858] systemd[1]: Started User Login Management. buildbot # [ 11.124610] systemd[1]: Stopped target Host and Network Name Lookups. buildbot # [ 11.128678] systemd[1]: Stopping Host and Network Name Lookups... buildbot # [ 11.129611] systemd[1]: Stopped target User and Group Name Lookups. buildbot # [ 11.130534] systemd[1]: Stopping User and Group Name Lookups... buildbot # [ 11.140705] systemd[1]: Starting linger-users.service... buildbot # [ 11.143108] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... buildbot # [ 11.202225] systemd[1]: nscd.service: Deactivated successfully. buildbot # [ 11.203924] systemd[1]: Stopped Name Service Cache Daemon (nsncd). buildbot # [ 11.222856] systemd[1]: linger-users.service: Deactivated successfully. buildbot # [ 11.228513] systemd[1]: Finished linger-users.service. buildbot # [ 11.249909] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 11.273859] systemd[1]: Finished resolvconf update. buildbot # [ 11.277215] systemd[1]: Reached target Preparation for Network. buildbot # [ 11.288634] systemd[1]: Starting DHCP Client... buildbot # [ 11.304212] systemd[1]: Starting Extra networking commands.... buildbot # [ 11.333472] nsncd[483]: Jul 19 05:23:46.955 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 11.344718] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 11.359396] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 11.365195] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 11.379169] (udev-worker)[314]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 11.388446] (udev-worker)[316]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 11.394308] (udev-worker)[316]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 11.575154] dhcpcd[508]: dhcpcd-10.3.2 starting buildbot # [ 11.591892] dhcpcd[544]: dev: loaded udev buildbot # [ 11.620624] systemd[1]: Finished Extra networking commands.. buildbot # [ 11.621550] systemd[1]: Reached target Network. buildbot # [ 11.632179] systemd[1]: Starting Nginx Web Server... buildbot # [ 11.635510] systemd-logind[416]: Watching system buttons on /dev/input/event0 (gpio-keys) buildbot # [ 11.642225] systemd[1]: Starting PostgreSQL Server... buildbot # [ 11.660792] 8021q: 802.1Q VLAN Support v1.8 buildbot # [ 11.666236] systemd[1]: Starting SSH Daemon... buildbot # [ 11.698162] systemd[1]: Starting Permit User Sessions... buildbot # [ 11.707312] systemd[1]: Condition check resulted in Virtio network device being skipped. buildbot # [ 11.733111] systemd[1]: Starting Address configuration of eth1... buildbot # [ 11.826516] systemd[1]: Started SSH Daemon. buildbot # [ 11.827532] sshd[555]: Server listening on 0.0.0.0 port 22. buildbot # [ 11.843376] sshd[555]: Server listening on :: port 22. buildbot # [ 11.854520] systemd[1]: Starting Setup git test repository... buildbot # [ 11.856750] systemd[1]: Finished Permit User Sessions. buildbot # [ 11.877759] cfg80211: Loading compiled-in X.509 certificates for regulatory database buildbot # [ 11.894224] systemd[1]: Started Getty on tty1. buildbot # [ 11.920619] systemd[1]: Reached target Login Prompts. buildbot # [ 11.956407] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' buildbot # [ 11.956949] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' buildbot # [ 11.962455] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 buildbot # [ 11.962782] cfg80211: failed to load regulatory.db buildbot # [ 12.012683] 8021q: adding VLAN 0 to HW filter on device eth1 buildbot # [ 12.043822] network-addresses-eth1-start[558]: adding address 192.168.1.1/24... done buildbot # [ 12.081275] network-addresses-eth1-start[558]: adding address 2001:db8:1::1/64... done buildbot # [ 12.125590] systemd[1]: Finished Address configuration of eth1. buildbot # [ 12.162304] 8021q: adding VLAN 0 to HW filter on device eth0 buildbot # [ 12.153086] dhcpcd[544]: eth0: waiting for carrier buildbot # [ 12.156128] dhcpcd[544]: eth0: waiting for carrier buildbot # [ 12.165202] dhcpcd[544]: eth0: carrier acquired buildbot # [ 12.187110] setup-git-repo-start[584]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 12.192504] setup-git-repo-start[584]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 12.197112] setup-git-repo-start[584]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 12.209389] setup-git-repo-start[584]: hint: call: buildbot # [ 12.212339] setup-git-repo-start[584]: hint: buildbot # [ 12.217561] setup-git-repo-start[584]: hint: git config --global init.defaultBranch buildbot # [ 12.222905] setup-git-repo-start[584]: hint: buildbot # [ 12.227653] setup-git-repo-start[584]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 12.236288] setup-git-repo-start[584]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 12.237719] setup-git-repo-start[584]: hint: buildbot # [ 12.238328] setup-git-repo-start[584]: hint: git branch -m buildbot # [ 12.239188] setup-git-repo-start[584]: hint: buildbot # [ 12.239797] setup-git-repo-start[584]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 12.266218] mousedev: PS/2 mouse device common for all mice buildbot # [ 12.255492] setup-git-repo-start[584]: Initialized empty Git repository in /srv/repos/test-flake.git/ buildbot # [ 12.262138] dhcpcd[544]: DUID 00:01:00:01:31:ef:1b:e3:52:54:00:12:34:56 buildbot # [ 12.272305] dhcpcd[544]: eth0: IAID 00:12:34:56 buildbot # [ 12.273023] dhcpcd[544]: eth0: adding address fe80::5054:ff:fe12:3456 buildbot # [ 12.302399] setup-git-repo-start[598]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 12.303908] setup-git-repo-start[598]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 12.312915] setup-git-repo-start[598]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 12.318136] setup-git-repo-start[598]: hint: call: buildbot # [ 12.325517] setup-git-repo-start[598]: hint: buildbot # [ 12.326177] setup-git-repo-start[598]: hint: git config --global init.defaultBranch buildbot # [ 12.327315] setup-git-repo-start[598]: hint: buildbot # [ 12.327936] setup-git-repo-start[598]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 12.336783] setup-git-repo-start[598]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 12.339574] setup-git-repo-start[598]: hint: buildbot # [ 12.342204] setup-git-repo-start[598]: hint: git branch -m buildbot # [ 12.364535] setup-git-repo-start[598]: hint: buildbot # [ 12.368455] setup-git-repo-start[598]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 12.378422] setup-git-repo-start[598]: Initialized empty Git repository in /tmp/test-flake/.git/ buildbot # [ 12.386907] nginx-pre-start[575]: nginx: the configuration file /nix/store/2prvz19qbksk1xf2mac75l1raasjm1bi-nginx.conf syntax is ok buildbot # [ 12.394941] nginx-pre-start[575]: nginx: configuration file /nix/store/2prvz19qbksk1xf2mac75l1raasjm1bi-nginx.conf test is successful buildbot # [ 12.410223] postgresql-pre-start[580]: The files belonging to this database system will be owned by user "postgres". buildbot # [ 12.411742] postgresql-pre-start[580]: This user must also own the server process. buildbot # [ 12.420873] postgresql-pre-start[580]: The database cluster will be initialized with locale "en_US.UTF-8". buildbot # [ 12.425422] postgresql-pre-start[580]: The default database encoding has accordingly been set to "UTF8". buildbot # [ 12.429667] postgresql-pre-start[580]: The default text search configuration will be set to "english". buildbot # [ 12.433024] postgresql-pre-start[580]: Data page checksums are enabled. buildbot # [ 12.440543] postgresql-pre-start[580]: fixing permissions on existing directory /var/lib/postgresql/18 ... ok buildbot # [ 12.446146] postgresql-pre-start[580]: creating subdirectories ... ok buildbot # [ 12.448293] postgresql-pre-start[580]: selecting dynamic shared memory implementation ... posix buildbot # [ 12.461780] systemd[1]: Started Nginx Web Server. buildbot: (finished: waiting for unit sshd.service, in 13.25 seconds) buildbot: waiting for unit setup-git-repo.service buildbot # [ 12.724409] postgresql-pre-start[580]: selecting default "max_connections" ... 100 buildbot # [ 12.790640] setup-git-repo-start[633]: [master (root-commit) 12e8d20] Initial commit buildbot # [ 12.791804] setup-git-repo-start[633]: 1 file changed, 39 insertions(+) buildbot # [ 12.796289] setup-git-repo-start[633]: create mode 100644 flake.nix buildbot # [ 12.946759] postgresql-pre-start[580]: selecting default "shared_buffers" ... 128MB buildbot # [ 12.986518] setup-git-repo-start[638]: To /srv/repos/test-flake.git buildbot # [ 12.987514] setup-git-repo-start[638]: * [new branch] master -> master buildbot # [ 12.996265] setup-git-repo-start[638]: branch 'master' set up to track 'origin/master'. buildbot # [ 13.090577] dhcpcd[544]: eth0: soliciting a DHCP lease buildbot # [ 13.096667] dhcpcd[544]: eth0: offered 10.0.2.15 from 10.0.2.2 buildbot # [ 13.104981] systemd-logind[416]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) buildbot # [ 13.112407] dhcpcd[544]: eth0: probing address 10.0.2.15/24 buildbot # [ 13.356949] setup-git-repo-start[649]: warning: unable to download 'https://cache.nixos.org/nix-cache-info': Could not resolve hostname (6) Could not resolve host: cache.nixos.org; retrying in 268 ms (attempt 1/5) buildbot # [ 13.624739] setup-git-repo-start[649]: warning: unable to download 'https://cache.nixos.org/nix-cache-info': Could not resolve hostname (6) Could not resolve host: cache.nixos.org; retrying in 637 ms (attempt 2/5) buildbot # [ 14.209122] dhcpcd[544]: eth0: soliciting an IPv6 router buildbot # [ 14.212179] dhcpcd[544]: eth0: Router Advertisement from fe80::2 buildbot # [ 14.214208] dhcpcd[544]: eth0: adding address fec0::5054:ff:fe12:3456/64 buildbot # [ 14.216861] dhcpcd[544]: eth0: adding route to fec0::/64 buildbot # [ 14.219013] dhcpcd[544]: eth0: adding default route via fe80::2 buildbot # [ 14.265780] setup-git-repo-start[649]: warning: unable to download 'https://cache.nixos.org/nix-cache-info': Could not resolve hostname (6) Could not resolve host: cache.nixos.org; retrying in 1156 ms (attempt 3/5) buildbot # [ 14.658142] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:09.0/virtio8/input/input3 buildbot # [ 15.258880] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. buildbot # [ 15.280088] systemd[1]: Starting Virtual Console Setup... buildbot # [ 15.324737] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 15.331500] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 15.353154] systemd[1]: Starting Virtual Console Setup... buildbot # [ 15.426021] setup-git-repo-start[649]: warning: unable to download 'https://cache.nixos.org/nix-cache-info': Could not resolve hostname (6) Could not resolve host: cache.nixos.org; retrying in 2697 ms (attempt 4/5) buildbot # [ 15.587343] systemd-logind[416]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) buildbot # [ 15.923812] systemd-vconsole-setup[670]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 15.934119] systemd[1]: Finished Virtual Console Setup. buildbot # [ 16.120476] postgresql-pre-start[580]: selecting default time zone ... UTC buildbot # [ 16.125580] postgresql-pre-start[580]: creating configuration files ... ok buildbot # [ 16.394247] postgresql-pre-start[580]: running bootstrap script ... ok buildbot # [ 17.042584] postgresql-pre-start[580]: performing post-bootstrap initialization ... ok buildbot # [ 17.187505] postgresql-pre-start[580]: syncing data to disk ... ok buildbot # [ 17.189810] postgresql-pre-start[580]: initdb: warning: enabling "trust" authentication for local connections buildbot # [ 17.191166] postgresql-pre-start[580]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. buildbot # [ 17.193421] postgresql-pre-start[580]: Success. You can now start the database server using: buildbot # [ 17.194676] postgresql-pre-start[580]: pg_ctl -D /var/lib/postgresql/18 -l logfile start buildbot # [ 17.317504] postgres[697]: [697] LOG: starting PostgreSQL 18.4 on aarch64-unknown-linux-gnu, compiled by clang version 21.1.8, 64-bit buildbot # [ 17.326549] postgres[697]: [697] LOG: listening on IPv6 address "::1", port 5432 buildbot # [ 17.327763] postgres[697]: [697] LOG: listening on IPv4 address "127.0.0.1", port 5432 buildbot # [ 17.330580] postgres[697]: [697] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" buildbot # [ 17.343361] postgres[706]: [706] LOG: database system was shut down at 2026-07-19 05:23:52 GMT buildbot # [ 17.348425] postgres[697]: [697] LOG: database system is ready to accept connections buildbot # [ 17.352303] systemd[1]: Started PostgreSQL Server. buildbot # [ 17.361217] systemd[1]: Starting PostgreSQL Setup Scripts... buildbot # [ 17.569017] postgresql-setup-start[717]: CREATE DATABASE buildbot # [ 17.620599] postgresql-setup-start[722]: CREATE ROLE buildbot # [ 17.644812] postgresql-setup-start[724]: ALTER DATABASE buildbot # [ 17.651126] systemd[1]: Finished PostgreSQL Setup Scripts. buildbot # [ 17.654252] systemd[1]: Reached target PostgreSQL. buildbot # [ 17.656904] systemd[1]: Starting Buildbot Continuous Integration Server.... buildbot # [ 17.709683] buildbot-master-pre-start[729]: mkdir: created directory '/var/lib/buildbot/master' buildbot # [ 17.962277] dhcpcd[544]: eth0: leased 10.0.2.15 for 86400 seconds buildbot # [ 17.963282] dhcpcd[544]: eth0: adding route to 10.0.2.0/24 buildbot # [ 17.964419] dhcpcd[544]: eth0: adding default route via 10.0.2.2 buildbot # [ 18.125306] setup-git-repo-start[649]: warning: unable to download 'https://cache.nixos.org/nix-cache-info': Could not resolve hostname (6) Could not resolve host: cache.nixos.org buildbot # [ 18.127500] setup-git-repo-start[649]: this derivation will be built: buildbot # [ 18.131174] setup-git-repo-start[649]: /nix/store/lqx3p33b67znqs9dzp4mdp81b11fiwzz-skippable-test.drv buildbot # [ 18.138452] systemd[1]: Started DHCP Client. buildbot # [ 18.262019] setup-git-repo-start[649]: building '/nix/store/lqx3p33b67znqs9dzp4mdp81b11fiwzz-skippable-test.drv'... buildbot # [ 18.293423] systemd[1]: Finished Setup git test repository. buildbot: (finished: waiting for unit setup-git-repo.service, in 6.67 seconds) buildbot: waiting for unit multi-user.target buildbot # [ 23.822918] buildbot-master-pre-start[731]: updating existing installation buildbot # [ 23.828175] buildbot-master-pre-start[731]: not touching existing buildbot.tac buildbot # [ 23.829223] buildbot-master-pre-start[731]: creating buildbot.tac.new instead buildbot # [ 23.830183] buildbot-master-pre-start[731]: creating /var/lib/buildbot/master/master.cfg.sample buildbot # [ 23.831356] buildbot-master-pre-start[731]: creating database (postgresql://@/buildbot) buildbot # [ 23.836132] buildbot-master-pre-start[731]: buildmaster configured in /var/lib/buildbot/master buildbot # [ 24.258007] systemd[1]: Started Buildbot Continuous Integration Server.. buildbot # [ 24.265006] systemd[1]: Started Buildbot Worker.. buildbot # [ 24.268116] systemd[1]: Reached target Multi-User System. buildbot # [ 24.269535] systemd[1]: Startup finished in 981ms (kernel) + 5.400s (initrd) + 17.886s (userspace) = 24.269s. buildbot: (finished: waiting for unit multi-user.target, in 5.70 seconds) subtest: Master and worker services start buildbot: waiting for unit buildbot-master.service buildbot: (finished: waiting for unit buildbot-master.service, in 0.11 seconds) buildbot: waiting for unit buildbot-worker.service buildbot: (finished: waiting for unit buildbot-worker.service, in 0.11 seconds) buildbot: waiting for TCP port 8010 on localhost buildbot # [ 26.082033] twistd[848]: Starting worker local-worker-000 buildbot # [ 26.082207] twistd[848]: 2026-07-19T05:24:00+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py... buildbot # [ 26.082260] twistd[848]: 2026-07-19T05:24:01+0000 [-] Loaded. buildbot # [ 26.082324] twistd[848]: 2026-07-19T05:24:01+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/sfbjq7mllid60l3jvxw0q2gknqldyy2l-python3-3.14.6/bin/python3.14 3.14.6) starting up. buildbot # [ 26.082359] twistd[848]: 2026-07-19T05:24:01+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 26.082389] twistd[848]: 2026-07-19T05:24:01+0000 [-] Starting Worker -- version: 2026.07.19 buildbot # [ 26.082434] twistd[848]: 2026-07-19T05:24:01+0000 [-] recording hostname in twistd.hostname buildbot # [ 26.082466] twistd[848]: 2026-07-19T05:24:01+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 26.103862] twistd[848]: 2026-07-19T05:24:01+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect in 1.7519869901485667 seconds. buildbot # [ 26.107313] twistd[848]: 2026-07-19T05:24:01+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 27.861366] twistd[848]: 2026-07-19T05:24:03+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 27.866103] twistd[848]: 2026-07-19T05:24:03+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect in 2.8250524894949836 seconds. buildbot # [ 27.869335] twistd[848]: 2026-07-19T05:24:03+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 28.152342] twistd[847]: 2026-07-19T05:24:00+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac... buildbot # [ 28.154420] twistd[847]: 2026-07-19T05:24:03+0000 [-] Loaded. buildbot # [ 28.155430] twistd[847]: 2026-07-19T05:24:03+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/sfbjq7mllid60l3jvxw0q2gknqldyy2l-python3-3.14.6/bin/python3.14 3.14.6) starting up. buildbot # [ 28.158365] twistd[847]: 2026-07-19T05:24:03+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 28.160462] twistd[847]: 2026-07-19T05:24:03+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0 buildbot # [ 28.170255] twistd[847]: 2026-07-19T05:24:03+0000 [-] Loading configuration from '/nix/store/czmxh9f8q1blkzdnsvjjajnvaxxskrqg-master.cfg' buildbot # [ 29.094913] twistd[847]: 2026-07-19T05:24:04+0000 [-] Setting up database with URL 'postgresql://@/buildbot' buildbot # [ 29.298402] twistd[847]: 2026-07-19T05:24:04+0000 [-] adding 9 new builders, removing 0 buildbot # [ 29.459663] twistd[847]: 2026-07-19T05:24:05+0000 [-] adding 3 new services, removing 0 buildbot # [ 29.627598] twistd[847]: 2026-07-19T05:24:05+0000 [-] adding 1 new change_sources, removing 0 buildbot # [ 29.635851] twistd[847]: 2026-07-19T05:24:05+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 29.646253] twistd[847]: 2026-07-19T05:24:05+0000 [-] adding 14 new schedulers, removing 0 buildbot # [ 29.843453] twistd[847]: 2026-07-19T05:24:05+0000 [-] BuildbotSite starting on 8010 buildbot # [ 29.845972] twistd[847]: 2026-07-19T05:24:05+0000 [buildbot.www.service.BuildbotSite#info] Starting factory buildbot # [ 29.847986] twistd[847]: 2026-07-19T05:24:05+0000 [-] adding 5 new workers, removing 0 buildbot # [ 29.868634] twistd[847]: 2026-07-19T05:24:05+0000 [-] Starting Worker -- version: 2026.07.19 buildbot # [ 29.869999] twistd[847]: 2026-07-19T05:24:05+0000 [-] recording hostname in twistd.hostname buildbot # [ 29.871251] twistd[847]: 2026-07-19T05:24:05+0000 [-] message from master: attached buildbot # [ 29.873358] twistd[847]: 2026-07-19T05:24:05+0000 [-] Got workerinfo from '__Janitor' buildbot # [ 29.886808] twistd[847]: 2026-07-19T05:24:05+0000 [-] bot attached buildbot # [ 29.887846] twistd[847]: 2026-07-19T05:24:05+0000 [-] Worker __Janitor attached to __Janitor buildbot # [ 29.890850] twistd[847]: 2026-07-19T05:24:05+0000 [-] message from master: attached buildbot # [ 29.925187] twistd[847]: 2026-07-19T05:24:05+0000 [-] PBServerFactory starting on 9989 buildbot # [ 29.927351] twistd[847]: 2026-07-19T05:24:05+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory buildbot # [ 29.943391] sshd-session[912]: Accepted publickey for root from ::1 port 51938 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 29.962370] sshd-session[912]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 29.999245] twistd[847]: 2026-07-19T05:24:05+0000 [-] BuildMaster is running buildbot # [ 30.008280] systemd[1]: Created slice Slice /user/0. buildbot # [ 30.012544] systemd[1]: Starting User Runtime Directory /run/user/0... buildbot # [ 30.024756] systemd-logind[416]: New session '1' of user 'root' with class 'user' and type 'tty'. buildbot # [ 30.064694] systemd[1]: Finished User Runtime Directory /run/user/0. buildbot # [ 30.080088] systemd[1]: Starting User Manager for UID 0... buildbot # [ 30.120094] (systemd)[917]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 30.125565] systemd-logind[416]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'. buildbot # [ 30.229430] systemd[917]: Failed to adjust io pressure threshold, ignoring: Device or resource busy buildbot # [ 30.472887] systemd[917]: Queued start job for default target Main User Target. buildbot # [ 30.480966] systemd[917]: Failed to adjust io pressure threshold, ignoring: Device or resource busy buildbot # [ 30.485139] systemd[917]: Created slice User Application Slice. buildbot # [ 30.486472] systemd[917]: Started Daily Cleanup of User's Temporary Directories. buildbot # [ 30.487816] systemd[917]: Reached target Paths. buildbot # [ 30.490373] systemd[917]: Reached target Timers. buildbot # [ 30.492096] systemd[917]: Starting D-Bus User Message Bus Socket... buildbot # [ 30.494386] systemd[917]: Starting Create User Files and Directories... buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded! buildbot: (finished: waiting for TCP port 8010 on localhost, in 5.45 seconds) buildbot: waiting for success: curl --fail --head http://localhost:8010 buildbot # [ 30.548360] systemd[917]: Finished Create User Files and Directories. buildbot # [ 30.596075] systemd[917]: Listening on D-Bus User Message Bus Socket. buildbot # [ 30.600272] systemd[917]: Reached target Sockets. buildbot # [ 30.601247] systemd[917]: Reached target Basic System. buildbot # [ 30.602230] systemd[917]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system buildbot # [ 30.603918] systemd[917]: Reached target Main User Target. buildbot # [ 30.607049] systemd[917]: Startup finished in 448ms. buildbot # [ 30.609165] systemd[1]: Started User Manager for UID 0. buildbot # [ 30.610567] systemd[1]: Started Session 1 of User root. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 [ 30.658749] sshd-session[939]: Received disconnect from ::1 port 51938:11: disconnected by user buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 [ 30.664674] sshd-session[939]: Disconnected from user root ::1 port 51938 buildbot # [ 30.665916] sshd-session[912]: pam_unix(sshd:session): session closed for user root buildbot # [ 30.671929] systemd[1]: session-1.scope: Deactivated successfully. buildbot # 0 0 0 0 0 0 0 0 0 0 buildbot # [ 30.683712] systemd-logind[416]: Session 1 logged out. Waiting for processes to exit. buildbot # [ 30.688957] systemd-logind[416]: Removed session 1. buildbot # [ 30.695220] twistd[848]: 2026-07-19T05:24:06+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.17 seconds) (finished: subtest: Master and worker services start, in 5.84 seconds) buildbot: waiting for success: curl http://localhost:8010/api/v2/projects buildbot # [ 30.717889] twistd[847]: 2026-07-19T05:24:06+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=57210) buildbot # [ 30.726749] twistd[848]: 2026-07-19T05:24:06+0000 [Broker,client] message from master: attached buildbot # [ 30.735796] twistd[847]: 2026-07-19T05:24:06+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000' buildbot # [ 30.763185] twistd[847]: 2026-07-19T05:24:06+0000 [-] bot attached buildbot # [ 30.766350] twistd[847]: 2026-07-19T05:24:06+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build buildbot # [ 30.767847] twistd[847]: 2026-07-19T05:24:06+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval buildbot # [ 30.775115] twistd[847]: 2026-07-19T05:24:06+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect buildbot # [ 30.801818] twistd[847]: 2026-07-19T05:24:06+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect buildbot # [ 30.803375] twistd[847]: 2026-07-19T05:24:06+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed buildbot # [ 30.849782] twistd[847]: 2026-07-19T05:24:06+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval buildbot # [ 30.851406] twistd[847]: 2026-07-19T05:24:06+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure buildbot # [ 30.892977] twistd[847]: 2026-07-19T05:24:06+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # [ 30.913537] twistd[848]: 2026-07-19T05:24:06+0000 [Broker,client] message from master: attached buildbot # [ 30.914762] twistd[848]: 2026-07-19T05:24:06+0000 [Broker,client] message from master: attached buildbot # [ 30.915910] twistd[848]: 2026-07-19T05:24:06+0000 [Broker,client] message from master: attached buildbot # Dload Upload Total Spent Left Speed buildbot # 0[ 30.946523] twistd[848]: 2026-07-19T05:24:06+0000 [Broker,client] message from master: attached buildbot # [ 30.947781] twistd[848]: 2026-07-19T05:24:06+0000 [Broker,client] message from master: attached buildbot # 0 0 0 0 0 0 0 0[ 30.964154] twistd[848]: 2026-07-19T05:24:06+0000 [Broker,client] message from master: attached buildbot # [ 30.965374] twistd[848]: 2026-07-19T05:24:06+0000 [Broker,client] message from master: attached buildbot # [ 30.966539] twistd[848]: 2026-07-19T05:24:06+0000 [Broker,client] message from master: attached buildbot # [ 30.967684] twistd[848]: 2026-07-19T05:24:06+0000 [Broker,client] Connected to buildmaster; worker is ready buildbot # 100 266 100 266 0 0 3042 0 0100 266 100 266 0 0 2956 [ 30.993073] twistd[848]: 2026-07-19T05:24:06+0000 [Broker,client] sending application-level keepalives every 600 seconds buildbot # 0 0100 266 100 266 0 0 2613 0 0 buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.32 seconds) subtest: Wait for poller to initialize buildbot: waiting for success: journalctl -u buildbot-master.service | grep "gitpoller: processing changes from" buildbot # [ 31.085382] sshd-session[948]: Accepted publickey for root from ::1 port 51946 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 31.096487] sshd-session[948]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 31.106042] systemd-logind[416]: New session '3' of user 'root' with class 'user' and type 'tty'. buildbot # [ 31.109108] systemd[1]: Started Session 3 of User root. buildbot # [ 31.151392] sshd-session[962]: Received disconnect from ::1 port 51946:11: disconnected by user buildbot # [ 31.154126] sshd-session[962]: Disconnected from user root ::1 port 51946 buildbot # [ 31.156719] sshd-session[948]: pam_unix(sshd:session): session closed for user root buildbot # [ 31.162865] systemd[1]: session-3.scope: Deactivated successfully. buildbot # [ 31.165125] systemd-logind[416]: Session 3 logged out. Waiting for processes to exit. buildbot # [ 31.167541] systemd-logind[416]: Removed session 3. buildbot # [ 31.188155] twistd[847]: 2026-07-19T05:24:06+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: (finished: waiting for success: journalctl -u buildbot-master.service | grep "gitpoller: processing changes from", in 1.09 seconds) (finished: subtest: Wait for poller to initialize, in 1.09 seconds) subtest: Push new commit to trigger poller buildbot: must succeed: cd /tmp/test-flake echo '# Updated at test time' >> flake.nix git add flake.nix git commit -m 'Test commit to trigger poller' git push origin master buildbot # Enumerating objects: 5, done. buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done. buildbot # Compressing objects: 50% (1/2)Compressing objects: 100% (2/2)Compressing objects: 100% (2/2), done. buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 300 bytes | 60.00 KiB/s, done. buildbot # Total 3 (delta 1), reused 0 (delta 0), pack-reused 0 (from 0) buildbot # To /srv/repos/test-flake.git buildbot # 12e8d20..3bda4f8 master -> master buildbot: (finished: must succeed: cd /tmp/test-flake echo '# Updated at test time' >> flake.nix git add flake.nix git commit -m 'Test commit to trigger poller' git push origin master , in 0.11 seconds) (finished: subtest: Push new commit to trigger poller, in 0.11 seconds) subtest: Poller triggers builds and verifies results buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2664 0 0100 51 100 51 0 0 2357 0 0100 51 100 51 0 0 2088 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4074 0 0100 51 100 51 0 0 3038 0 0100 51 100 51 0 0 2462 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3889 0 0100 51 100 51 0 0 2754 0 0100 51 100 51 0 0 2154 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4410 0 0100 51 100 51 0 0 3247 0 0100 51 100 51 0 0 2618 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3486 0 0100 51 100 51 0 0 2607 0 0100 51 100 51 0 0 2151 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4425 0 0100 51 100 51 0 0 3126 0 0100 51 100 51 0 0 2505 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3270 0 0100 51 100 51 0 0 2643 0 0100 51 100 51 0 0 2242 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 39.929146] sshd-session[1024]: Accepted publickey for root from ::1 port 53490 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 39.953088] sshd-session[1024]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 39.968926] systemd-logind[416]: New session '4' of user 'root' with class 'user' and type 'tty'. buildbot # [ 39.979049] systemd[1]: Started Session 4 of User root. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1485 0 [ 40.037407] sshd-session[1030]: Received disconnect from ::1 port 53490:11: disconnected by user buildbot # [ 40.039104] sshd-session[1030]: Disconnected from user root ::1 port 53490 buildbot # 0100[ 40.046534] sshd-session[1024]: pam_unix(sshd:session): session closed for user root buildbot # 51 100 51 0 0 1026 0 0100 51 100 [ 40.060155] systemd[1]: session-4.scope: Deactivated successfully. buildbot # [ 40.061276] systemd-logind[416]: Session 4 logged out. Waiting for processes to exit. buildbot # 51 0 0 908 0 0 buildbot # [ 40.067145] systemd-logind[416]: Removed session 4. buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.19 seconds) buildbot # [ 40.271798] sshd-session[1035]: Accepted publickey for root from ::1 port 53498 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 40.292131] sshd-session[1035]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 40.307764] systemd-logind[416]: New session '5' of user 'root' with class 'user' and type 'tty'. buildbot # [ 40.313347] systemd[1]: Started Session 5 of User root. buildbot # [ 40.370042] sshd-session[1038]: Received disconnect from ::1 port 53498:11: disconnected by user buildbot # [ 40.372720] sshd-session[1038]: Disconnected from user root ::1 port 53498 buildbot # [ 40.375589] sshd-session[1035]: pam_unix(sshd:session): session closed for user root buildbot # [ 40.382045] systemd[1]: session-5.scope: Deactivated successfully. buildbot # [ 40.386625] systemd-logind[416]: Session 5 logged out. Waiting for processes to exit. buildbot # [ 40.389796] systemd-logind[416]: Removed session 5. buildbot # [ 40.410110] twistd[847]: 2026-07-19T05:24:16+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # [ 40.456726] twistd[847]: 2026-07-19T05:24:16+0000 [-] gitpoller: processing 1 changes: ['3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master" buildbot # [ 40.566792] twistd[847]: 2026-07-19T05:24:16+0000 [-] added change with revision 3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94 to database buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3906 0 0100 51 100 51 0 0 2942 0 0100 51 100 51 0 0 2389 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3941 0 0100 51 100 51 0 0 2976 0 0100 51 100 51 0 0 2429 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4042 0 0100 51 100 51 0 0 2946 0 0100 51 100 51 0 0 2363 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4267 0 0100 51 100 51 0 0 3106 0 0100 51 100 51 0 0 2486 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3002 0 0100 51 100 51 0 0 2066 0 0100 51 100 51 0 0 1623 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot # [ 45.619754] twistd[847]: 2026-07-19T05:24:21+0000 [-] added buildset 1 to database buildbot # [ 45.784677] twistd[847]: 2026-07-19T05:24:21+0000 [-] starting build using worker buildbot # [ 45.795097] twistd[847]: 2026-07-19T05:24:21+0000 [-] .startBuild buildbot # [ 45.881018] twistd[847]: 2026-07-19T05:24:21+0000 [-] acquireLocks(worker , locks []) buildbot # [ 45.887409] twistd[847]: 2026-07-19T05:24:21+0000 [-] starting build .. pinging the worker buildbot # [ 45.893279] twistd[847]: 2026-07-19T05:24:21+0000 [-] sending ping buildbot # [ 45.895840] twistd[847]: 2026-07-19T05:24:21+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 45.899184] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] message from master: ping buildbot # [ 45.924140] twistd[847]: 2026-07-19T05:24:21+0000 [-] : RemoteCommand.run [0] buildbot # [ 45.925874] twistd[847]: 2026-07-19T05:24:21+0000 [-] command '['git', '--version']' in dir 'build' buildbot # [ 45.927280] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command 0): startCommand:shell buildbot # [ 45.938367] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand buildbot # [ 45.939929] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command ['git', '--version']): git --version buildbot # [ 45.942848] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 45.945502] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command ['git', '--version']): watching logfiles {} buildbot # [ 45.947204] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version'] buildbot # [ 45.948985] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command ['git', '--version']): using PTY: False buildbot # [ 45.959335] twistd[848]: 2026-07-19T05:24:21+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.028561 buildbot # [ 45.961400] twistd[848]: 2026-07-19T05:24:21+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) buildbot # [ 45.982024] twistd[847]: 2026-07-19T05:24:21+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 46.018206] twistd[847]: 2026-07-19T05:24:21+0000 [-] : RemoteCommand.run [1] buildbot # [ 46.029358] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command 1): startCommand:stat buildbot # [ 46.030688] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched' buildbot # [ 46.037569] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) buildbot # [ 46.041060] twistd[847]: 2026-07-19T05:24:21+0000 [Broker,0,127.0.0.1] rc=2 buildbot # [ 46.049646] twistd[847]: 2026-07-19T05:24:21+0000 [-] : RemoteCommand.run [2] buildbot # [ 46.077180] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command 2): startCommand:mkdir buildbot # [ 46.078634] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) buildbot # [ 46.084619] twistd[847]: 2026-07-19T05:24:21+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 46.089419] twistd[847]: 2026-07-19T05:24:21+0000 [-] : RemoteCommand.run [3] buildbot # [ 46.125782] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command 3): startCommand:downloadFile buildbot # [ 46.129872] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) buildbot # [ 46.137441] twistd[847]: 2026-07-19T05:24:21+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 46.144981] twistd[847]: 2026-07-19T05:24:21+0000 [-] : RemoteCommand.run [4] buildbot # [ 46.178919] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command 4): startCommand:listdir buildbot # [ 46.186024] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) buildbot # [ 46.190951] twistd[847]: 2026-07-19T05:24:21+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 46.200116] twistd[847]: 2026-07-19T05:24:21+0000 [-] No git repo present, making full clone buildbot # [ 46.202481] twistd[847]: 2026-07-19T05:24:21+0000 [-] : RemoteCommand.run [5] buildbot # [ 46.211464] twistd[847]: 2026-07-19T05:24:21+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build' buildbot # [ 46.225489] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command 5): startCommand:shell buildbot # [ 46.231510] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand buildbot # [ 46.248444] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress buildbot # [ 46.270828] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 46.279457] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {} buildbot # [ 46.285822] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress'] buildbot # [ 46.297184] twistd[848]: 2026-07-19T05:24:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False buildbot # [ 46.510890] sshd-session[1074]: Accepted publickey for root from ::1 port 39758 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 46.531961] sshd-session[1074]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 46.545465] systemd-logind[416]: New session '6' of user 'root' with class 'user' and type 'tty'. buildbot # [ 46.552950] systemd[1]: Started Session 6 of User root. buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 46.616192] sshd-session[1077]: Received disconnect from ::1 port 39758:11: disconnected by user buildbot # [ 46.622012] sshd-session[1077]: Disconnected from user root ::1 port 39758 buildbot # [ 46.629673] sshd-session[1074]: pam_unix(sshd:session): session closed for user root buildbot # [ 46.635047] systemd[1]: session-6.scope: Deactivated successfully. buildbot # [ 46.637475] systemd-logind[416]: Session 6 logged out. Waiting for processes to exit. buildbot # [ 46.638749] systemd-logind[416]: Removed session 6. buildbot # [ 46.660178] twistd[848]: 2026-07-19T05:24:22+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.430401 buildbot # [ 46.672248] twistd[848]: 2026-07-19T05:24:22+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) buildbot # [ 46.682049] twistd[847]: 2026-07-19T05:24:22+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 46.706098] twistd[847]: 2026-07-19T05:24:22+0000 [-] : RemoteCommand.run [6] buildbot # [ 46.711283] twistd[847]: 2026-07-19T05:24:22+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94']' in dir 'build' buildbot # [ 46.720686] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command 6): startCommand:shell buildbot # [ 46.721850] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94']): RunProcess._startCommand buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 [ 46.736526] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f 3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94 buildbot # 0100 401 100 401 0 0 11024 0 0100 401 100 401 0 0 10312 0 [ 46.752355] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # 0100 401 100 401 0 0 8678 0 0 buildbot # [ 46.759981] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94']): watching logfiles {} buildbot # [ 46.765916] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94'] buildbot # [ 46.773019] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94']): using PTY: False buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.17 seconds) buildbot # [ 46.785950] twistd[848]: 2026-07-19T05:24:22+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94']): command finished with signal None, exit code 0, elapsedTime: 0.067502 buildbot # [ 46.793746] twistd[848]: 2026-07-19T05:24:22+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) buildbot # [ 46.797448] twistd[847]: 2026-07-19T05:24:22+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 46.816092] twistd[847]: 2026-07-19T05:24:22+0000 [-] : RemoteCommand.run [7] buildbot # [ 46.819341] twistd[847]: 2026-07-19T05:24:22+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build' buildbot # [ 46.832954] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command 7): startCommand:shell buildbot # [ 46.836376] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand buildbot # [ 46.839695] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive buildbot # [ 46.849699] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 46.854353] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {} buildbot # [ 46.860086] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive'] buildbot # [ 46.865924] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False buildbot # [ 46.977518] twistd[848]: 2026-07-19T05:24:22+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.141047 buildbot # [ 46.985112] twistd[848]: 2026-07-19T05:24:22+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) buildbot # [ 46.988673] twistd[847]: 2026-07-19T05:24:22+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 47.003419] twistd[847]: 2026-07-19T05:24:22+0000 [-] : RemoteCommand.run [8] buildbot # [ 47.005111] twistd[847]: 2026-07-19T05:24:22+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build' buildbot # [ 47.024958] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command 8): startCommand:shell buildbot # [ 47.028397] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand buildbot # [ 47.029977] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD buildbot # [ 47.031470] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 47.038992] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {} buildbot # [ 47.040999] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD'] buildbot # [ 47.044731] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False buildbot # [ 47.052084] twistd[848]: 2026-07-19T05:24:22+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.024204 buildbot # [ 47.054044] twistd[848]: 2026-07-19T05:24:22+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) buildbot # [ 47.081917] twistd[847]: 2026-07-19T05:24:22+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 47.104085] twistd[847]: 2026-07-19T05:24:22+0000 [-] Got Git revision 3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94 buildbot # [ 47.105662] twistd[847]: 2026-07-19T05:24:22+0000 [-] : RemoteCommand.run [9] buildbot # [ 47.131074] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command 9): startCommand:rmdir buildbot # [ 47.136153] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand buildbot # [ 47.138898] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot buildbot # [ 47.144864] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs) buildbot # [ 47.148690] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {} buildbot # [ 47.151679] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot'] buildbot # [ 47.156193] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False buildbot # [ 47.168925] twistd[848]: 2026-07-19T05:24:22+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.038259 buildbot # [ 47.171959] twistd[848]: 2026-07-19T05:24:22+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) buildbot # [ 47.189493] twistd[847]: 2026-07-19T05:24:22+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 47.214290] twistd[847]: 2026-07-19T05:24:22+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): [] buildbot # [ 47.238387] twistd[847]: 2026-07-19T05:24:22+0000 [-] step 'git' complete: success (None) buildbot # [ 47.248408] twistd[847]: 2026-07-19T05:24:22+0000 [-] acquireLocks(step NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(, )]) buildbot # [ 47.268062] twistd[847]: 2026-07-19T05:24:22+0000 [-] : RemoteCommand.run [10] buildbot # [ 47.270227] twistd[847]: 2026-07-19T05:24:22+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build' buildbot # [ 47.278721] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command 10): startCommand:shell buildbot # [ 47.279983] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand buildbot # [ 47.282673] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi' buildbot # [ 47.285588] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 47.288724] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {} buildbot # [ 47.291015] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'] buildbot # [ 47.294180] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False buildbot # [ 47.309358] twistd[848]: 2026-07-19T05:24:22+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.035458 buildbot # [ 47.311921] twistd[848]: 2026-07-19T05:24:22+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) buildbot # [ 47.325668] twistd[847]: 2026-07-19T05:24:22+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 47.330772] twistd[847]: 2026-07-19T05:24:22+0000 [-] : RemoteCommand.run [11] buildbot # [ 47.335561] twistd[847]: 2026-07-19T05:24:22+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build' buildbot # [ 47.369362] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command 11): startCommand:shell buildbot # [ 47.373329] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand buildbot # [ 47.384827] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks' buildbot # [ 47.394343] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 47.401346] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {} buildbot # [ 47.407388] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks'] buildbot # [ 47.417896] twistd[848]: 2026-07-19T05:24:22+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False buildbot # [ 47.534157] systemd[1]: Started Nix Daemon. buildbot # [ 47.636951] nix-daemon[1122]: accepted connection from pid 1121, user buildbot-worker buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 21719 0 0100 401 100 401 0 0 18140 0 0100 401 100 401 0 0 15811 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 23028 0 0100 401 100 401 0 0 17882 0 0100 401 100 401 0 0 15059 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot # [ 49.948256] sshd-session[1139]: Accepted publickey for root from ::1 port 39768 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 49.973929] sshd-session[1139]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 49.988931] systemd-logind[416]: New session '7' of user 'root' with class 'user' and type 'tty'. buildbot # [ 49.997005] systemd[1]: Started Session 7 of User root. buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 50.051407] sshd-session[1142]: Received disconnect from ::1 port 39768:11: disconnected by user buildbot # [ 50.055555] sshd-session[1142]: Disconnected from user root ::1 port 39768 buildbot # [ 50.059980] sshd-session[1139]: pam_unix(sshd:session): session closed for user root buildbot # [ 50.072764] systemd[1]: session-7.scope: Deactivated successfully. buildbot # [ 50.073768] systemd-logind[416]: Session 7 logged out. Waiting for processes to exit. buildbot # [ 50.077425] systemd-logind[416]: Removed session 7. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 10744 0 0100 401 100 401 0 0 10046 0 0100 401 100 401 0 0 8550 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds) buildbot # [ 50.337935] sshd-session[1150]: Accepted publickey for root from ::1 port 39774 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 50.360807] sshd-session[1150]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 50.381750] systemd-logind[416]: New session '8' of user 'root' with class 'user' and type 'tty'. buildbot # [ 50.389288] systemd[1]: Started Session 8 of User root. buildbot # [ 50.445134] sshd-session[1153]: Received disconnect from ::1 port 39774:11: disconnected by user buildbot # [ 50.448432] sshd-session[1153]: Disconnected from user root ::1 port 39774 buildbot # [ 50.450700] sshd-session[1150]: pam_unix(sshd:session): session closed for user root buildbot # [ 50.454189] systemd[1]: session-8.scope: Deactivated successfully. buildbot # [ 50.460132] systemd-logind[416]: Session 8 logged out. Waiting for processes to exit. buildbot # [ 50.464436] systemd-logind[416]: Removed session 8. buildbot # [ 50.472929] twistd[847]: 2026-07-19T05:24:26+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 18824 0 0100 401 100 401 0 0 16065 0 0100 401 100 401 0 0 14218 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot # [ 51.932200] twistd[848]: 2026-07-19T05:24:27+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 4.554657 buildbot # [ 51.942869] twistd[848]: 2026-07-19T05:24:27+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) buildbot # [ 51.956935] twistd[847]: 2026-07-19T05:24:27+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 52.040710] twistd[847]: 2026-07-19T05:24:27+0000 [-] releaseLocks(NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(, )] buildbot # [ 52.075161] twistd[847]: 2026-07-19T05:24:27+0000 [-] step 'Evaluate flake' complete: success (None) buildbot # [ 52.154645] twistd[847]: 2026-07-19T05:24:27+0000 [-] added buildset 2 to database buildbot # [ 52.212458] twistd[847]: 2026-07-19T05:24:27+0000 [-] added buildset 3 to database buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Lef[ 52.376080] twistd[847]: 2026-07-19T05:24:27+0000 [-] starting build using worker buildbot # t Speed buildbot # 0 0 0 0 0 0 0 [ 52.384909] twistd[847]: 2026-07-19T05:24:27+0000 [-] .startBuild buildbot # 0 0100 750 100 750 0 0 18562 0 0100 750 100 750 0 0 15398 0 0100 750 100 750 0 0 14054 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds) buildbot # [ 52.473059] twistd[847]: 2026-07-19T05:24:28+0000 [-] acquireLocks(worker , locks []) buildbot # [ 52.478688] twistd[847]: 2026-07-19T05:24:28+0000 [-] starting build .. pinging the worker buildbot # [ 52.482640] twistd[847]: 2026-07-19T05:24:28+0000 [-] sending ping buildbot # [ 52.484852] twistd[847]: 2026-07-19T05:24:28+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 52.486090] twistd[848]: 2026-07-19T05:24:28+0000 [Broker,client] message from master: ping buildbot # [ 52.505120] twistd[847]: 2026-07-19T05:24:28+0000 [-] : RemoteCommand.run [12] buildbot # [ 52.516837] twistd[847]: 2026-07-19T05:24:28+0000 [-] command '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']' in dir 'build' buildbot # [ 52.523956] twistd[848]: 2026-07-19T05:24:28+0000 [Broker,client] (command 12): startCommand:shell buildbot # [ 52.525530] twistd[848]: 2026-07-19T05:24:28+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): RunProcess._startCommand buildbot # [ 52.529717] twistd[848]: 2026-07-19T05:24:28+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): nix build -L --option keep-going true --max-silent-time 1200 --accept-flake-config --out-link result-aarch64-linux.failing-test '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*' buildbot # [ 52.535896] twistd[848]: 2026-07-19T05:24:28+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-build/build (timeout 10800 secs) buildbot # [ 52.540843] twistd[848]: 2026-07-19T05:24:28+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): watching logfiles {} buildbot # [ 52.544962] twistd[848]: 2026-07-19T05:24:28+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): argv: [b'nix', b'build', b'-L', b'--option', b'keep-going', b'true', b'--max-silent-time', b'1200', b'--accept-flake-config', b'--out-link', b'result-aarch64-linux.failing-test', b'/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*'] buildbot # [ 52.553744] twistd[848]: 2026-07-19T05:24:28+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): using PTY: False buildbot # [ 52.624863] nix-daemon[1122]: accepted connection from pid 1167, user buildbot-worker buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 40350 0 0100 751 100 751 0 0 33114 0 0100 751 100 751 0 0 28491 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 48845 0 0100 751 100 751 0 0 35223 0 0100 751 100 751 0 0 27901 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 55510 0 0100 751 100 751 0 0 41528 0 0100 751 100 751 0 0 33683 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 58037 0 0100 751 100 751 0 0 42622 0 0100 751 100 751 0 0 34511 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 57.868341] twistd[848]: 2026-07-19T05:24:33+0000 [-] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): command finished with signal None, exit code 1, elapsedTime: 5.355270 buildbot # [ 57.873614] twistd[848]: 2026-07-19T05:24:33+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) buildbot # [ 57.882652] twistd[847]: 2026-07-19T05:24:33+0000 [Broker,0,127.0.0.1] rc=1 buildbot # [ 57.923118] twistd[847]: 2026-07-19T05:24:33+0000 [-] releaseLocks(NixBuildCommand(name='Build flake attr', command=['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', Interpolate('result-%(prop:attr)s'), Interpolate('%(prop:drv_path)s^*')], timeout=10800, haltOnFailure=True, logEnviron=False)): [] buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # [ 57.945563] twistd[847]: 2026-07-19T05:24:33+0000 [-] step 'Build flake attr' complete: failure (["'nix build ...' (failure)"]) buildbot # [ 57.947154] twistd[847]: 2026-07-19T05:24:33+0000 [-] : build finished buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 775 100 775 0 0 31852 0 0100 775 100 775 0 0 28883 0 0100 775 100 7[ 57.973366] twistd[847]: 2026-07-19T05:24:33+0000 [-] releaseLocks(): [] buildbot # 75 0 0 21318 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.19 seconds) buildbot # [ 58.130148] twistd[847]: 2026-07-19T05:24:33+0000 [-] starting build using worker buildbot # [ 58.142968] twistd[847]: 2026-07-19T05:24:33+0000 [-] .startBuild buildbot # [ 58.229614] twistd[847]: 2026-07-19T05:24:33+0000 [-] acquireLocks(worker , locks []) buildbot # [ 58.234688] twistd[847]: 2026-07-19T05:24:33+0000 [-] starting build .. pinging the worker buildbot # [ 58.238739] twistd[847]: 2026-07-19T05:24:33+0000 [-] sending ping buildbot # [ 58.241016] twistd[848]: 2026-07-19T05:24:33+0000 [Broker,client] message from master: ping buildbot # [ 58.242247] twistd[847]: 2026-07-19T05:24:33+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 58.261451] twistd[847]: 2026-07-19T05:24:33+0000 [-] : RemoteCommand.run [13] buildbot # [ 58.272840] twistd[847]: 2026-07-19T05:24:33+0000 [-] command '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']' in dir 'build' buildbot # [ 58.279174] twistd[848]: 2026-07-19T05:24:33+0000 [Broker,client] (command 13): startCommand:shell buildbot # [ 58.280871] twistd[848]: 2026-07-19T05:24:33+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): RunProcess._startCommand buildbot # [ 58.287012] twistd[848]: 2026-07-19T05:24:33+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): nix build -L --option keep-going true --max-silent-time 1200 --accept-flake-config --out-link result-aarch64-linux.test '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*' buildbot # [ 58.292492] twistd[848]: 2026-07-19T05:24:33+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-build/build (timeout 10800 secs) buildbot # [ 58.297330] twistd[848]: 2026-07-19T05:24:33+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): watching logfiles {} buildbot # [ 58.301446] twistd[848]: 2026-07-19T05:24:33+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): argv: [b'nix', b'build', b'-L', b'--option', b'keep-going', b'true', b'--max-silent-time', b'1200', b'--accept-flake-config', b'--out-link', b'result-aarch64-linux.test', b'/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*'] buildbot # [ 58.307981] twistd[848]: 2026-07-19T05:24:33+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): using PTY: False buildbot # [ 58.378561] nix-daemon[1122]: accepted connection from pid 1202, user buildbot-worker buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1127 100 1127 0 0 87717 0 0100 1127 100 1127 0 0 65825 0 0100 1127 100 1127 0 0 53602 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot # [ 59.910311] sshd-session[1217]: Accepted publickey for root from ::1 port 57576 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 59.932833] sshd-session[1217]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 59.949804] systemd-logind[416]: New session '9' of user 'root' with class 'user' and type 'tty'. buildbot # [ 59.957292] systemd[1]: Started Session 9 of User root. buildbot # [ 59.999828] sshd-session[1220]: Received disconnect from ::1 port 57576:11: disconnected by user buildbot # [ 60.002902] sshd-session[1220]: Disconnected from user root ::1 port 57576 buildbot # [ 60.007665] sshd-session[1217]: pam_unix(sshd:session): session closed for user root buildbot # [ 60.020725] systemd[1]: session-9.scope: Deactivated successfully. buildbot # [ 60.021993] systemd-logind[416]: Session 9 logged out. Waiting for processes to exit. buildbot # [ 60.029053] systemd-logind[416]: Removed session 9. buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0[ 60.232375] sshd-session[1225]: Accepted publickey for root from ::1 port 57578 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # 100 1127 100 1127 0 0 39245 0 0100 1127 100 1127 0 0 35618 0 0100 1127 100 1127 0 0 26864 0 0 buildbot # [ 60.260863] sshd-session[1225]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot # [ 60.272230] systemd-logind[416]: New session '10' of user 'root' with class 'user' and type 'tty'. buildbot # [ 60.277018] systemd[1]: Started Session 10 of User root. buildbot # [ 60.316827] sshd-session[1231]: Received disconnect from ::1 port 57578:11: disconnected by user buildbot # [ 60.318813] sshd-session[1231]: Disconnected from user root ::1 port 57578 buildbot # [ 60.320056] sshd-session[1225]: pam_unix(sshd:session): session closed for user root buildbot # [ 60.325295] systemd[1]: session-10.scope: Deactivated successfully. buildbot # [ 60.328786] systemd-logind[416]: Session 10 logged out. Waiting for processes to exit. buildbot # [ 60.331732] systemd-logind[416]: Removed session 10. buildbot # [ 60.337846] twistd[847]: 2026-07-19T05:24:35+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1127 100 1127 0 0 69882 0 0100 1127 100 1127 0 0 55253 0 0100 1127 100 1127 0 0 46239 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1127 100 1127 0 0 62155 0 0100 1127 100 1127 0 0 49534 0 0100 1127 100 1127 0 0 41502 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot # [ 63.306265] twistd[848]: 2026-07-19T05:24:38+0000 [-] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): command finished with signal None, exit code 0, elapsedTime: 5.038677 buildbot # [ 63.310659] twistd[848]: 2026-07-19T05:24:38+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) buildbot # [ 63.315927] twistd[847]: 2026-07-19T05:24:38+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 63.342230] twistd[847]: 2026-07-19T05:24:38+0000 [-] releaseLocks(NixBuildCommand(name='Build flake attr', command=['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', Interpolate('result-%(prop:attr)s'), Interpolate('%(prop:drv_path)s^*')], timeout=10800, haltOnFailure=True, logEnviron=False)): [] buildbot # [ 63.359488] twistd[847]: 2026-07-19T05:24:38+0000 [-] step 'Build flake attr' complete: success (None) buildbot # [ 63.386905] twistd[847]: 2026-07-19T05:24:39+0000 [-] added buildset 4 to database buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # [ 63.585270] twistd[847]: 2026-07-19T05:24:39+0000 [-] starting build using worker buildbot # Dload Upload Total Spent Left Speed buildbot # [ 63.594050] twistd[847]: 2026-07-19T05:24:39+0000 [-] .startBuild buildbot # 0 0 0 0 0 0 0 0 0100 1475 100 1475 0 0 46745 0 0100 1475 100 1475 0 0 42894 0 0100 1475 100 1475 0 0 39688 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds) buildbot # [ 63.667566] twistd[847]: 2026-07-19T05:24:39+0000 [-] acquireLocks(worker , locks []) buildbot # [ 63.672817] twistd[847]: 2026-07-19T05:24:39+0000 [-] starting build .. pinging the worker buildbot # [ 63.675786] twistd[847]: 2026-07-19T05:24:39+0000 [-] sending ping buildbot # [ 63.678020] twistd[848]: 2026-07-19T05:24:39+0000 [Broker,client] message from master: ping buildbot # [ 63.681686] twistd[847]: 2026-07-19T05:24:39+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 63.700065] twistd[847]: 2026-07-19T05:24:39+0000 [-] : RemoteCommand.run [14] buildbot # [ 63.703120] twistd[847]: 2026-07-19T05:24:39+0000 [-] command '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']' in dir 'build' buildbot # [ 63.710387] twistd[848]: 2026-07-19T05:24:39+0000 [Broker,client] (command 14): startCommand:shell buildbot # [ 63.711608] twistd[848]: 2026-07-19T05:24:39+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): RunProcess._startCommand buildbot # [ 63.720892] twistd[848]: 2026-07-19T05:24:39+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): nix-store --add-root /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test -r /nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test buildbot # [ 63.725936] twistd[848]: 2026-07-19T05:24:39+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-register-gcroot/build (timeout 1200 secs) buildbot # [ 63.730243] twistd[848]: 2026-07-19T05:24:39+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): watching logfiles {} buildbot # [ 63.733784] twistd[848]: 2026-07-19T05:24:39+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): argv: [b'nix-store', b'--add-root', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', b'-r', b'/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test'] buildbot # [ 63.739218] twistd[848]: 2026-07-19T05:24:39+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): using PTY: False buildbot # [ 63.810898] nix-daemon[1122]: accepted connection from pid 1256, user buildbot-worker buildbot # [ 63.832044] twistd[848]: 2026-07-19T05:24:39+0000 [-] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): command finished with signal None, exit code 0, elapsedTime: 0.120674 buildbot # [ 63.835512] twistd[848]: 2026-07-19T05:24:39+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) buildbot # [ 63.840743] twistd[847]: 2026-07-19T05:24:39+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 63.869356] twistd[847]: 2026-07-19T05:24:39+0000 [-] releaseLocks(ShellCommand(name='Register gcroot', command=['nix-store', '--add-root', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/%(prop:attr)s'), '-r', Property(out_path)], logEnviron=False)): [] buildbot # [ 63.882333] twistd[847]: 2026-07-19T05:24:39+0000 [-] step 'Register gcroot' complete: success (None) buildbot # [ 63.883684] twistd[847]: 2026-07-19T05:24:39+0000 [-] : build finished buildbot # [ 63.893902] twistd[847]: 2026-07-19T05:24:39+0000 [-] releaseLocks(): [] buildbot # [ 64.040372] twistd[847]: 2026-07-19T05:24:39+0000 [-] releaseLocks(Trigger(name='Register gcroot', waitForFinish=True, schedulerNames=['test-flake-nix-register-gcroot'], haltOnFailure=True, flunkOnFailure=True, sourceStamps=[], alwaysUseLatest=False, updateSourceStamp=False, doStepIf=. at 0xf9af7550d7a0>, copy_properties=['out_path', 'attr'], set_properties={'report_status': False})): [] buildbot # [ 64.055200] twistd[847]: 2026-07-19T05:24:39+0000 [-] step 'Register gcroot' complete: success (None) buildbot # [ 64.068055] twistd[847]: 2026-07-19T05:24:39+0000 [-] : RemoteCommand.run [15] buildbot # [ 64.069781] twistd[847]: 2026-07-19T05:24:39+0000 [-] command '['rm', '-f', 'result-aarch64-linux.test']' in dir 'build' buildbot # [ 64.078047] twistd[848]: 2026-07-19T05:24:39+0000 [Broker,client] (command 15): startCommand:shell buildbot # [ 64.079319] twistd[848]: 2026-07-19T05:24:39+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): RunProcess._startCommand buildbot # [ 64.084199] twistd[848]: 2026-07-19T05:24:39+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): rm -f result-aarch64-linux.test buildbot # [ 64.085997] twistd[848]: 2026-07-19T05:24:39+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-build/build (timeout 1200 secs) buildbot # [ 64.088495] twistd[848]: 2026-07-19T05:24:39+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): watching logfiles {} buildbot # [ 64.090313] twistd[848]: 2026-07-19T05:24:39+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): argv: [b'rm', b'-f', b'result-aarch64-linux.test'] buildbot # [ 64.092765] twistd[848]: 2026-07-19T05:24:39+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): using PTY: False buildbot # [ 64.102182] twistd[848]: 2026-07-19T05:24:39+0000 [-] (command ['rm', '-f', 'result-aarch64-linux.test']): command finished with signal None, exit code 0, elapsedTime: 0.027768 buildbot # [ 64.104349] twistd[848]: 2026-07-19T05:24:39+0000 [-] (command 15): ProtocolCommandBase.command_complete (success) buildbot # [ 64.122019] twistd[847]: 2026-07-19T05:24:39+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 64.148059] twistd[847]: 2026-07-19T05:24:39+0000 [-] releaseLocks(ShellCommand(name='Delete temporary gcroots', command=['rm', '-f', Interpolate('result-%(prop:attr)s')], logEnviron=False)): [] buildbot # [ 64.157139] twistd[847]: 2026-07-19T05:24:39+0000 [-] step 'Delete temporary gcroots' complete: success (None) buildbot # [ 64.171141] twistd[847]: 2026-07-19T05:24:39+0000 [-] releaseLocks(UpdateBuildOutput(project=, name='Update build output', path=PosixPath('/var/lib/buildbot-outputs'), branch_config={})): [] buildbot # [ 64.180000] twistd[847]: 2026-07-19T05:24:39+0000 [-] step 'Update build output' complete: success (None) buildbot # [ 64.182697] twistd[847]: 2026-07-19T05:24:39+0000 [-] : build finished buildbot # [ 64.190985] twistd[847]: 2026-07-19T05:24:39+0000 [-] releaseLocks(): [] buildbot # [ 64.357007] twistd[847]: 2026-07-19T05:24:39+0000 [-] releaseLocks(BuildTrigger(project=, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): [] buildbot # [ 64.384753] twistd[847]: 2026-07-19T05:24:40+0000 [-] step 'build flake' complete: failure (['(1 success, 1 failure, 1 skipped)']) buildbot # [ 64.400083] twistd[847]: 2026-07-19T05:24:40+0000 [-] : RemoteCommand.run [16] buildbot # [ 64.403294] twistd[847]: 2026-07-19T05:24:40+0000 [-] command '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']' in dir 'build' buildbot # [ 64.412490] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command 16): startCommand:shell buildbot # [ 64.413721] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): RunProcess._startCommand buildbot # [ 64.422185] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): nix-store --add-root /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test -r /nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test buildbot # [ 64.427429] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 64.432144] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): watching logfiles {} buildbot # [ 64.437932] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): argv: [b'nix-store', b'--add-root', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', b'-r', b'/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test'] buildbot # [ 64.443937] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): using PTY: False buildbot # [ 64.512991] nix-daemon[1122]: accepted connection from pid 1269, user buildbot-worker buildbot # [ 64.532110] twistd[848]: 2026-07-19T05:24:40+0000 [-] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): command finished with signal None, exit code 0, elapsedTime: 0.122159 buildbot # [ 64.535773] twistd[848]: 2026-07-19T05:24:40+0000 [-] (command 16): ProtocolCommandBase.command_complete (success) buildbot # [ 64.543469] twistd[847]: 2026-07-19T05:24:40+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 64.573630] twistd[847]: 2026-07-19T05:24:40+0000 [-] releaseLocks(ProcessSkippedBuilds(project=, gcroots_user='buildbot-worker', branch_config={}, outputs_path=PosixPath('/var/lib/buildbot-outputs'), name='Process skipped builds', doStepIf=. at 0xf9af769e5c70>, hideStepIf=. at 0xf9af769e5bc0>)): [] buildbot # [ 64.585590] twistd[847]: 2026-07-19T05:24:40+0000 [-] step 'Process skipped builds' complete: success (None) buildbot # [ 64.602579] twistd[847]: 2026-07-19T05:24:40+0000 [-] : RemoteCommand.run [17] buildbot # [ 64.611074] twistd[847]: 2026-07-19T05:24:40+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build' buildbot # [ 64.613897] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command 17): startCommand:shell buildbot # [ 64.615242] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand buildbot # [ 64.618080] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ buildbot # [ 64.623547] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 64.626800] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {} buildbot # [ 64.629376] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/'] buildbot # [ 64.632896] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 64.639967] twistd[848]: 2026-07-19T05:24:40+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.038101 buildbot # [ 64.642459] twistd[848]: 2026-07-19T05:24:40+0000 [-] (command 17): ProtocolCommandBase.command_complete (success) buildbot # [ 64.653954] twistd[847]: 2026-07-19T05:24:40+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 64.689910] twistd[847]: 2026-07-19T05:24:40+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): [] buildbot # [ 64.702974] twistd[847]: 2026-07-19T05:24:40+0000 [-] step 'Cleanup drv paths' complete: success (None) buildbot # [ 64.720885] twistd[847]: 2026-07-19T05:24:40+0000 [-] releaseLocks(BuildbotEffectsCommand(project=, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=. at 0xf9af7550cb40>, logEnviron=False)): [] buildbot # [ 64.734070] twistd[847]: 2026-07-19T05:24:40+0000 [-] step 'Evaluate effects' complete: skipped (None) buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 [ 64.757868] twistd[847]: 2026-07-19T05:24:40+0000 [-] : RemoteCommand.run [18] buildbot # 1521 100 1521 0 0 63496 0 [ 64.767370] twistd[847]: 2026-07-19T05:24:40+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', '3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # 0100 1521 100 1521 0 0 38344 0 0100 1521 100 1521 0 0 36102 [ 64.777996] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command 18): startCommand:shell buildbot # [ 64.779226] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # 0 [ 64.785626] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev 3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94 --branch master --repo test-flake buildbot # 0 buildbot # [ 64.792562] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 64.796553] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 64.799613] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 64.806899] twistd[848]: 2026-07-19T05:24:40+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.17 seconds) buildbot # [ 65.122622] nix-daemon[1122]: accepted connection from pid 1281, user buildbot-worker buildbot # [ 65.161116] twistd[848]: 2026-07-19T05:24:40+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', '3bda4f8b0bec7c03bbe493dd2efbf5de74df0d94', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.394180 buildbot # [ 65.168175] twistd[848]: 2026-07-19T05:24:40+0000 [-] (command 18): ProtocolCommandBase.command_complete (success) buildbot # [ 65.170448] twistd[847]: 2026-07-19T05:24:40+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 65.205170] twistd[847]: 2026-07-19T05:24:40+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=. at 0xf9af7550d220>, hideStepIf=. at 0xf9af7550d2d0>, logEnviron=False)): [] buildbot # [ 65.218510] twistd[847]: 2026-07-19T05:24:40+0000 [-] step 'Evaluate scheduled effects' complete: success (None) buildbot # [ 65.221047] twistd[847]: 2026-07-19T05:24:40+0000 [-] : build finished buildbot # [ 65.234664] twistd[847]: 2026-07-19T05:24:40+0000 [-] releaseLocks(): [] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1530 100 1530 0 0 90952 0 0100 1530 100 1530 0 0 66397 0 0100 1530 100 1530 0 0 53937 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 2172 100 2172 0 0 144.4k 0 0100 2172 100 2172 0 0 120.4k 0 0100 2172 100 2172 0 0 103.9k 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 1548 100 1548 0 0 89011 0 0100 1548 100 1548 0 0 77761 0 0100 1548 100 1548 0 0 69187 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 2132 100 2132 0 0 124.2k 0 0100 2132 100 2132 0 0 108.0k 0 0100 2132 100 2132 0 0 97659 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 2489 100 2489 0 0 212.0k 0 0100 2489 100 2489 0 0 173.7k 0 0100 2489 100 2489 0 0 145.0k 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.06 seconds) (finished: subtest: Poller triggers builds and verifies results, in 33.97 seconds) subtest: Verify output paths are written for skipped builds buildbot: must succeed: nix config show system buildbot: (finished: must succeed: nix config show system, in 0.09 seconds) buildbot: must succeed: nix eval --raw /tmp/test-flake#checks.aarch64-linux.skippable-test.outPath buildbot: (finished: must succeed: nix eval --raw /tmp/test-flake#checks.aarch64-linux.skippable-test.outPath , in 0.12 seconds) buildbot: waiting for success: test -f /var/lib/buildbot-outputs/unknown/test-flake/master/aarch64-linux.skippable-test buildbot: (finished: waiting for success: test -f /var/lib/buildbot-outputs/unknown/test-flake/master/aarch64-linux.skippable-test, in 0.02 seconds) buildbot: must succeed: cat /var/lib/buildbot-outputs/unknown/test-flake/master/aarch64-linux.skippable-test buildbot: (finished: must succeed: cat /var/lib/buildbot-outputs/unknown/test-flake/master/aarch64-linux.skippable-test, in 0.03 seconds) (finished: subtest: Verify output paths are written for skipped builds, in 0.26 seconds) (finished: run the VM test script, in 67.21 seconds) test script finished in 67.25s cleanup kill QemuMachine (pid 45) buildbot # qemu-system-aarch64: terminating on signal 15 from pid 39 (/nix/store/sfbjq7mllid60l3jvxw0q2gknqldyy2l-python3-3.14.6/bin/python3.14) (finished: cleanup, in 0.27 seconds) additionally exposed symbols: buildbot, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh Poller has started processing Pushed new commit to repository Expected output path for skippable-test: /nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test