vm-test-run-scheduled-effects
x86_64-linux.scheduled-effects
· build #39
· raw
1tribuchet: building on jamie2Machine state will be reset. To keep it, pass --keep-machine-state3start all VLans4(finished: start all VLans, in 0.00 seconds)5Test will time out and terminate in 3600 seconds6run the VM test script7buildbot: waiting for unit sshd.service8buildbot: waiting for the VM to finish booting9buildbot: starting vm10buildbot # Disk image does not exist, creating the virtualisation disk image...11buildbot: QEMU running (pid 12)12buildbot # Formatting '/build/vm-state-buildbot/tmp.hpbF8k9rG7', fmt=raw size=107374182413buildbot # mke2fs 1.47.4 (6-Mar-2025)14buildbot # Discarding device blocks: 0/262144 done15buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes16buildbot # Filesystem UUID: f5731ac2-b611-4867-9204-43f26d828d0417buildbot # Superblock backups stored on blocks:18buildbot # 32768, 98304, 163840, 22937619buildbot # 20buildbot # Allocating group tables: 0/8 done21buildbot # Writing inode tables: 0/8 done22buildbot # Creating journal (8192 blocks): done23buildbot # Writing superblocks and filesystem accounting information: 0/8 done24buildbot # 25buildbot # Virtualisation disk image created.26buildbot # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)27buildbot # 28buildbot # 29buildbot # iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+3EFD1920+3EF31920 CA0030buildbot # Press Ctrl-B to configure iPXE (PCI 00:03.0)...31buildbot # 32buildbot # 33buildbot # 34buildbot # 35buildbot # iPXE (http://ipxe.org) 00:09.0 CB00 PCI2.10 PnP PMM 3EFD1920 3EF31920 CB0036buildbot # Press Ctrl-B to configure iPXE (PCI 00:09.0)...37buildbot # 38buildbot # 39buildbot # Booting from ROM...40buildbot # Probing EDD (edd=off to disable)... o[ 0.000000] Linux version 6.18.38 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Sat Jul 4 11:44:22 UTC 202641buildbot # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/ffn8xixg4rsw70hl01621d7ahnwls5k4-nixos-system-buildbot-test/init regInfo=/nix/store/rsc5qrsywc4ciccfq6r6dvrrfpi0bqlz-closure-info/registration console=ttyS0,115200n8 console=tty042buildbot # [ 0.000000] BIOS-provided physical RAM map:43buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable44buildbot # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved45buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved46buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffdafff] usable47buildbot # [ 0.000000] BIOS-e820: [mem 0x000000003ffdb000-0x000000003fffffff] reserved48buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved49buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved50buildbot # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved51buildbot # [ 0.000000] NX (Execute Disable) protection: active52buildbot # [ 0.000000] APIC: Static calls initialized53buildbot # [ 0.000000] SMBIOS 2.8 present.54buildbot # [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/201455buildbot # [ 0.000000] DMI: Memory slots populated: 1/156buildbot # [ 0.000000] Hypervisor detected: KVM57buildbot # [ 0.000000] last_pfn = 0x3ffdb max_arch_pfn = 0x1000000000058buildbot # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d0059buildbot # [ 0.000000] kvm-clock: using sched offset of 501439276 cycles60buildbot # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns61buildbot # [ 0.000004] tsc: Detected 2400.006 MHz processor62buildbot # [ 0.000809] last_pfn = 0x3ffdb max_arch_pfn = 0x1000000000063buildbot # [ 0.000836] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs64buildbot # [ 0.000838] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT65buildbot # [ 0.002738] found SMP MP-table at [mem 0x000f5470-0x000f547f]66buildbot # [ 0.002748] Using GB pages for direct mapping67buildbot # [ 0.002852] RAMDISK: [mem 0x3e4ba000-0x3ffcffff]68buildbot # [ 0.002860] ACPI: Early table checksum verification disabled69buildbot # [ 0.002862] ACPI: RSDP 0x00000000000F5290 000014 (v00 BOCHS )70buildbot # [ 0.002866] ACPI: RSDT 0x000000003FFE23CC 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)71buildbot # [ 0.002870] ACPI: FACP 0x000000003FFE2280 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)72buildbot # [ 0.002877] ACPI: DSDT 0x000000003FFE0040 002240 (v01 BOCHS BXPC 00000001 BXPC 00000001)73buildbot # [ 0.002879] ACPI: FACS 0x000000003FFE0000 00004074buildbot # [ 0.002881] ACPI: APIC 0x000000003FFE22F4 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001)75buildbot # [ 0.002882] ACPI: HPET 0x000000003FFE236C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)76buildbot # [ 0.002884] ACPI: WAET 0x000000003FFE23A4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)77buildbot # [ 0.002885] ACPI: Reserving FACP table memory at [mem 0x3ffe2280-0x3ffe22f3]78buildbot # [ 0.002886] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe227f]79buildbot # [ 0.002887] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f]80buildbot # [ 0.002887] ACPI: Reserving APIC table memory at [mem 0x3ffe22f4-0x3ffe236b]81buildbot # [ 0.002888] ACPI: Reserving HPET table memory at [mem 0x3ffe236c-0x3ffe23a3]82buildbot # [ 0.002888] ACPI: Reserving WAET table memory at [mem 0x3ffe23a4-0x3ffe23cb]83buildbot # [ 0.003119] No NUMA configuration found84buildbot # [ 0.003120] Faking a node at [mem 0x0000000000000000-0x000000003ffdafff]85buildbot # [ 0.003122] NODE_DATA(0) allocated [mem 0x3ffd5780-0x3ffdacff]86buildbot # [ 0.005421] Zone ranges:87buildbot # [ 0.005422] DMA [mem 0x0000000000001000-0x0000000000ffffff]88buildbot # [ 0.005423] DMA32 [mem 0x0000000001000000-0x000000003ffdafff]89buildbot # [ 0.005424] Normal empty90buildbot # [ 0.005425] Device empty91buildbot # [ 0.005426] Movable zone start for each node92buildbot # [ 0.005426] Early memory node ranges93buildbot # [ 0.005427] node 0: [mem 0x0000000000001000-0x000000000009efff]94buildbot # [ 0.005428] node 0: [mem 0x0000000000100000-0x000000003ffdafff]95buildbot # [ 0.005429] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffdafff]96buildbot # [ 0.005551] On node 0, zone DMA: 1 pages in unavailable ranges97buildbot # [ 0.005819] On node 0, zone DMA: 97 pages in unavailable ranges98buildbot # [ 0.023407] On node 0, zone DMA32: 37 pages in unavailable ranges99buildbot # [ 0.023825] ACPI: PM-Timer IO Port: 0x608100buildbot # [ 0.023835] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])101buildbot # [ 0.023862] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23102buildbot # [ 0.023864] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)103buildbot # [ 0.023866] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)104buildbot # [ 0.023867] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)105buildbot # [ 0.023868] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)106buildbot # [ 0.023869] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)107buildbot # [ 0.023871] ACPI: Using ACPI (MADT) for SMP configuration information108buildbot # [ 0.023872] ACPI: HPET id: 0x8086a201 base: 0xfed00000109buildbot # [ 0.023875] TSC deadline timer available110buildbot # [ 0.023879] CPU topo: Max. logical packages: 1111buildbot # [ 0.023880] CPU topo: Max. logical dies: 1112buildbot # [ 0.023881] CPU topo: Max. dies per package: 1113buildbot # [ 0.023884] CPU topo: Max. threads per core: 1114buildbot # [ 0.023885] CPU topo: Num. cores per package: 1115buildbot # [ 0.023885] CPU topo: Num. threads per package: 1116buildbot # [ 0.023886] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs117buildbot # [ 0.023901] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()118buildbot # [ 0.023930] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]119buildbot # [ 0.023932] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]120buildbot # [ 0.023933] [mem 0x40000000-0xfeffbfff] available for PCI devices121buildbot # [ 0.023935] Booting paravirtualized kernel on KVM122buildbot # [ 0.023937] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns123buildbot # [ 0.028412] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1124buildbot # [ 0.030544] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152125buildbot # [ 0.030588] kvm-guest: PV spinlocks disabled, single CPU126buildbot # [ 0.030589] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/ffn8xixg4rsw70hl01621d7ahnwls5k4-nixos-system-buildbot-test/init regInfo=/nix/store/rsc5qrsywc4ciccfq6r6dvrrfpi0bqlz-closure-info/registration console=ttyS0,115200n8 console=tty0127buildbot # [ 0.030679] Unknown kernel command line parameters "regInfo=/nix/store/rsc5qrsywc4ciccfq6r6dvrrfpi0bqlz-closure-info/registration", will be passed to user space.128buildbot # [ 0.030691] random: crng init done129buildbot # [ 0.030692] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes130buildbot # [ 0.030712] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)131buildbot # [ 0.031239] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)132buildbot # [ 0.031273] Fallback order for Node 0: 0133buildbot # [ 0.031275] Built 1 zonelists, mobility grouping on. Total pages: 262009134buildbot # [ 0.031276] Policy zone: DMA32135buildbot # [ 0.033638] mem auto-init: stack:all(zero), heap alloc:on, heap free:off136buildbot # [ 0.035969] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1137buildbot # [ 0.038181] allocated 2097152 bytes of page_ext138buildbot # [ 0.047732] ftrace: allocating 48598 entries in 192 pages139buildbot # [ 0.047734] ftrace: allocated 192 pages with 2 groups140buildbot # [ 0.048547] Dynamic Preempt: lazy141buildbot # [ 0.048718] rcu: Preemptible hierarchical RCU implementation.142buildbot # [ 0.048719] rcu: RCU event tracing is enabled.143buildbot # [ 0.048720] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.144buildbot # [ 0.048721] Trampoline variant of Tasks RCU enabled.145buildbot # [ 0.048722] Rude variant of Tasks RCU enabled.146buildbot # [ 0.048722] Tracing variant of Tasks RCU enabled.147buildbot # [ 0.048723] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.148buildbot # [ 0.048723] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1149buildbot # [ 0.048743] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.150buildbot # [ 0.048745] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.151buildbot # [ 0.048746] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.152buildbot # [ 0.053057] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16153buildbot # [ 0.053326] rcu: srcu_init: Setting srcu_struct sizes based on contention.154buildbot # [ 0.053427] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)155buildbot # [ 0.056944] Console: colour VGA+ 80x25156buildbot # [ 0.056947] printk: legacy console [tty0] enabled157buildbot # [ 0.084994] printk: legacy console [ttyS0] enabled158buildbot # [ 0.180615] ACPI: Core revision 20250807159buildbot # [ 0.181512] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns160buildbot # [ 0.183093] APIC: Switch to symmetric I/O mode setup161buildbot # [ 0.184099] x2apic enabled162buildbot # [ 0.184878] APIC: Switched APIC routing to: physical x2apic163buildbot # [ 0.186758] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1164buildbot # [ 0.187765] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22983d4fda2, max_idle_ns: 440795302975 ns165buildbot # [ 0.189519] Calibrating delay loop (skipped) preset value.. 4800.01 BogoMIPS (lpj=2400006)166buildbot # [ 0.190604] x86/cpu: User Mode Instruction Prevention (UMIP) activated167buildbot # [ 0.192648] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127168buildbot # [ 0.193516] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0169buildbot # [ 0.194519] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto170buildbot # [ 0.195516] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl171buildbot # [ 0.197516] Transient Scheduler Attacks: Vulnerable: No microcode172buildbot # [ 0.198516] Spectre V2 : Mitigation: Enhanced / Automatic IBRS173buildbot # [ 0.199516] Speculative Return Stack Overflow: Mitigation: Safe RET174buildbot # [ 0.200516] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization175buildbot # [ 0.201521] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier176buildbot # [ 0.203516] active return thunk: srso_alias_return_thunk177buildbot # [ 0.204529] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'178buildbot # [ 0.205516] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'179buildbot # [ 0.206516] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'180buildbot # [ 0.208516] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'181buildbot # [ 0.210299] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'182buildbot # [ 0.211283] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'183buildbot # [ 0.212333] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'184buildbot # [ 0.213473] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256185buildbot # [ 0.214516] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64186buildbot # [ 0.215516] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512187buildbot # [ 0.216507] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024188buildbot # [ 0.217516] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8189buildbot # [ 0.218489] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.190buildbot # [ 0.252433] Freeing SMP alternatives memory: 44K191buildbot # [ 0.253089] pid_max: default: 32768 minimum: 301192buildbot # [ 0.253619] LSM: initializing lsm=capability,landlock,yama,bpf,ima193buildbot # [ 0.254622] landlock: Up and running.194buildbot # [ 0.255517] Yama: becoming mindful.195buildbot # [ 0.256729] LSM support for eBPF active196buildbot # [ 0.257537] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)197buildbot # [ 0.258538] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)198buildbot # [ 0.261044] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1)199buildbot # [ 0.262129] Performance Events: Fam17h+ core perfctr, AMD PMU driver.200buildbot # [ 0.262521] ... version: 2201buildbot # [ 0.263307] ... bit width: 48202buildbot # [ 0.263518] ... generic counters: 6203buildbot # [ 0.264226] ... generic bitmap: 000000000000003f204buildbot # [ 0.264529] ... fixed-purpose counters: 0205buildbot # [ 0.265228] ... fixed-purpose bitmap: 0000000000000000206buildbot # [ 0.265518] ... value mask: 0000ffffffffffff207buildbot # [ 0.266467] ... max period: 00007fffffffffff208buildbot # [ 0.267219] ... global_ctrl mask: 000000000000003f209buildbot # [ 0.267637] signal: max sigframe size: 3376210buildbot # [ 0.268453] rcu: Hierarchical SRCU implementation.211buildbot # [ 0.269133] rcu: Max phase no-delay instances is 400.212buildbot # [ 0.274198] smp: Bringing up secondary CPUs ...213buildbot # [ 0.274532] smp: Brought up 1 node, 1 CPU214buildbot # [ 0.275231] smpboot: Total of 1 processors activated (4800.01 BogoMIPS)215buildbot # [ 0.275708] Memory: 942396K/1048036K available (17159K kernel code, 2721K rwdata, 13560K rodata, 3636K init, 3020K bss, 98260K reserved, 0K cma-reserved)216buildbot # [ 0.276752] devtmpfs: initialized217buildbot # [ 0.277955] x86/mm: Memory block size: 128MB218buildbot # [ 0.279440] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns219buildbot # [ 0.280546] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)220buildbot # [ 0.281542] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).221buildbot # [ 0.282604] pinctrl core: initialized pinctrl subsystem222buildbot # [ 0.283692] PM: RTC time: 05:18:32, date: 2026-07-19223buildbot # [ 0.287202] NET: Registered PF_NETLINK/PF_ROUTE protocol family224buildbot # [ 0.287862] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations225buildbot # [ 0.288536] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations226buildbot # [ 0.289659] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations227buildbot # [ 0.290529] audit: initializing netlink subsys (disabled)228buildbot # [ 0.291598] thermal_sys: Registered thermal governor 'fair_share'229buildbot # [ 0.291600] thermal_sys: Registered thermal governor 'bang_bang'230buildbot # [ 0.292519] thermal_sys: Registered thermal governor 'step_wise'231buildbot # [ 0.293491] thermal_sys: Registered thermal governor 'user_space'232buildbot # [ 0.294251] audit: type=2000 audit(1784438313.318:1): state=initialized audit_enabled=0 res=1233buildbot # [ 0.295521] thermal_sys: Registered thermal governor 'power_allocator'234buildbot # [ 0.295536] cpuidle: using governor menu235buildbot # [ 0.297772] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5236buildbot # [ 0.298739] PCI: Using configuration type 1 for base access237buildbot # [ 0.299519] PCI: Using configuration type 1 for extended access238buildbot # [ 0.300695] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.239buildbot # [ 0.307802] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages240buildbot # [ 0.308520] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page241buildbot # [ 0.313520] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages242buildbot # [ 0.314519] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page243buildbot # [ 0.323106] ACPI: Added _OSI(Module Device)244buildbot # [ 0.323520] ACPI: Added _OSI(Processor Device)245buildbot # [ 0.324279] ACPI: Added _OSI(Processor Aggregator Device)246buildbot # [ 0.329329] ACPI: 1 ACPI AML tables successfully acquired and loaded247buildbot # [ 0.333063] ACPI: Interpreter enabled248buildbot # [ 0.333536] ACPI: PM: (supports S0 S3 S4 S5)249buildbot # [ 0.334245] ACPI: Using IOAPIC for interrupt routing250buildbot # [ 0.336535] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug251buildbot # [ 0.337518] PCI: Using E820 reservations for host bridge windows252buildbot # [ 0.340649] ACPI: Enabled 2 GPEs in block 00 to 0F253buildbot # [ 0.349454] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])254buildbot # [ 0.350309] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]255buildbot # [ 0.353086] acpiphp: Slot [3] registered256buildbot # [ 0.353570] acpiphp: Slot [4] registered257buildbot # [ 0.354251] acpiphp: Slot [5] registered258buildbot # [ 0.354539] acpiphp: Slot [6] registered259buildbot # [ 0.355248] acpiphp: Slot [7] registered260buildbot # [ 0.355552] acpiphp: Slot [8] registered261buildbot # [ 0.356234] acpiphp: Slot [9] registered262buildbot # [ 0.356540] acpiphp: Slot [10] registered263buildbot # [ 0.357232] acpiphp: Slot [11] registered264buildbot # [ 0.357556] acpiphp: Slot [12] registered265buildbot # [ 0.358283] acpiphp: Slot [13] registered266buildbot # [ 0.358538] acpiphp: Slot [14] registered267buildbot # [ 0.359241] acpiphp: Slot [15] registered268buildbot # [ 0.359545] acpiphp: Slot [16] registered269buildbot # [ 0.360256] acpiphp: Slot [17] registered270buildbot # [ 0.360537] acpiphp: Slot [18] registered271buildbot # [ 0.361263] acpiphp: Slot [19] registered272buildbot # [ 0.361561] acpiphp: Slot [20] registered273buildbot # [ 0.362304] acpiphp: Slot [21] registered274buildbot # [ 0.362537] acpiphp: Slot [22] registered275buildbot # [ 0.363245] acpiphp: Slot [23] registered276buildbot # [ 0.363539] acpiphp: Slot [24] registered277buildbot # [ 0.364267] acpiphp: Slot [25] registered278buildbot # [ 0.364537] acpiphp: Slot [26] registered279buildbot # [ 0.365262] acpiphp: Slot [27] registered280buildbot # [ 0.365544] acpiphp: Slot [28] registered281buildbot # [ 0.366241] acpiphp: Slot [29] registered282buildbot # [ 0.366538] acpiphp: Slot [30] registered283buildbot # [ 0.367264] acpiphp: Slot [31] registered284buildbot # [ 0.367554] PCI host bridge to bus 0000:00285buildbot # [ 0.368245] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]286buildbot # [ 0.368525] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]287buildbot # [ 0.369547] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]288buildbot # [ 0.370518] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window]289buildbot # [ 0.371519] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]290buildbot # [ 0.372519] pci_bus 0000:00: root bus resource [bus 00-ff]291buildbot # [ 0.373666] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint292buildbot # [ 0.374978] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint293buildbot # [ 0.375942] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint294buildbot # [ 0.377571] pci 0000:00:01.1: BAR 4 [io 0xc1e0-0xc1ef]295buildbot # [ 0.378486] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk296buildbot # [ 0.379381] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk297buildbot # [ 0.380276] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk298buildbot # [ 0.380519] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk299buildbot # [ 0.381720] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300 conventional PCI endpoint300buildbot # [ 0.383549] pci 0000:00:01.2: BAR 4 [io 0xc100-0xc11f]301buildbot # [ 0.385302] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint302buildbot # [ 0.386789] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI303buildbot # [ 0.387526] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB304buildbot # [ 0.388760] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint305buildbot # [ 0.391547] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]306buildbot # [ 0.392532] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]307buildbot # [ 0.393529] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]308buildbot # [ 0.394685] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]309buildbot # [ 0.396273] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint310buildbot # [ 0.400291] pci 0000:00:03.0: BAR 0 [io 0xc120-0xc13f]311buildbot # [ 0.400525] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]312buildbot # [ 0.401500] pci 0000:00:03.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]313buildbot # [ 0.402389] pci 0000:00:03.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]314buildbot # [ 0.404732] pci 0000:00:04.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint315buildbot # [ 0.407554] pci 0000:00:04.0: BAR 0 [io 0xc140-0xc15f]316buildbot # [ 0.408397] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]317buildbot # [ 0.409541] pci 0000:00:04.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref]318buildbot # [ 0.411824] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint319buildbot # [ 0.414380] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0bf]320buildbot # [ 0.415260] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]321buildbot # [ 0.415540] pci 0000:00:05.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref]322buildbot # [ 0.418139] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint323buildbot # [ 0.420374] pci 0000:00:06.0: BAR 0 [io 0xc160-0xc17f]324buildbot # [ 0.421190] pci 0000:00:06.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]325buildbot # [ 0.421540] pci 0000:00:06.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref]326buildbot # [ 0.423748] pci 0000:00:07.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint327buildbot # [ 0.427469] pci 0000:00:07.0: BAR 0 [io 0xc180-0xc19f]328buildbot # [ 0.428199] pci 0000:00:07.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]329buildbot # [ 0.429313] pci 0000:00:07.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref]330buildbot # [ 0.431632] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint331buildbot # [ 0.434352] pci 0000:00:08.0: BAR 0 [io 0xc000-0xc07f]332buildbot # [ 0.435173] pci 0000:00:08.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]333buildbot # [ 0.436357] pci 0000:00:08.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref]334buildbot # [ 0.438616] pci 0000:00:09.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint335buildbot # [ 0.441181] pci 0000:00:09.0: BAR 0 [io 0xc1a0-0xc1bf]336buildbot # [ 0.441525] pci 0000:00:09.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]337buildbot # [ 0.442503] pci 0000:00:09.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref]338buildbot # [ 0.443372] pci 0000:00:09.0: ROM [mem 0xfeb80000-0xfebbffff pref]339buildbot # [ 0.445716] pci 0000:00:0a.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint340buildbot # [ 0.447568] pci 0000:00:0a.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]341buildbot # [ 0.448541] pci 0000:00:0a.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref]342buildbot # [ 0.450730] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint343buildbot # [ 0.453526] pci 0000:00:0b.0: BAR 0 [io 0xc0c0-0xc0ff]344buildbot # [ 0.455173] pci 0000:00:0b.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]345buildbot # [ 0.455541] pci 0000:00:0b.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref]346buildbot # [ 0.457752] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint347buildbot # [ 0.460293] pci 0000:00:0c.0: BAR 0 [io 0xc1c0-0xc1df]348buildbot # [ 0.461197] pci 0000:00:0c.0: BAR 1 [mem 0xfebda000-0xfebdafff]349buildbot # [ 0.461541] pci 0000:00:0c.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref]350buildbot # [ 0.466186] ACPI: PCI: Interrupt link LNKA configured for IRQ 10351buildbot # [ 0.466661] ACPI: PCI: Interrupt link LNKB configured for IRQ 10352buildbot # [ 0.467650] ACPI: PCI: Interrupt link LNKC configured for IRQ 11353buildbot # [ 0.468650] ACPI: PCI: Interrupt link LNKD configured for IRQ 11354buildbot # [ 0.469593] ACPI: PCI: Interrupt link LNKS configured for IRQ 9355buildbot # [ 0.471681] iommu: Default domain type: Translated356buildbot # [ 0.472564] iommu: DMA domain TLB invalidation policy: lazy mode357buildbot # [ 0.473888] ACPI: bus type USB registered358buildbot # [ 0.474573] usbcore: registered new interface driver usbfs359buildbot # [ 0.475542] usbcore: registered new interface driver hub360buildbot # [ 0.476435] usbcore: registered new device driver usb361buildbot # [ 0.478169] NetLabel: Initializing362buildbot # [ 0.478519] NetLabel: domain hash size = 128363buildbot # [ 0.479245] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO364buildbot # [ 0.479568] NetLabel: unlabeled traffic allowed by default365buildbot # [ 0.480531] PCI: Using ACPI for IRQ routing366buildbot # [ 0.482109] pci 0000:00:02.0: vgaarb: setting as boot VGA device367buildbot # [ 0.482515] pci 0000:00:02.0: vgaarb: bridge control possible368buildbot # [ 0.482515] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none369buildbot # [ 0.482522] vgaarb: loaded370buildbot # [ 0.483266] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0371buildbot # [ 0.483520] hpet0: 3 comparators, 64-bit 100.000000 MHz counter372buildbot # [ 0.486590] clocksource: Switched to clocksource kvm-clock373buildbot # [ 0.489853] VFS: Disk quotas dquot_6.6.0374buildbot # [ 0.490579] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)375buildbot # [ 0.491899] pnp: PnP ACPI init376buildbot # [ 0.493019] pnp: PnP ACPI: found 6 devices377buildbot # [ 0.500557] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns378buildbot # [ 0.501999] clocksource: Switched to clocksource acpi_pm379buildbot # [ 0.502984] NET: Registered PF_INET protocol family380buildbot # [ 0.504007] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)381buildbot # [ 0.521522] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)382buildbot # [ 0.523051] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)383buildbot # [ 0.524386] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)384buildbot # [ 0.525740] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)385buildbot # [ 0.526969] TCP: Hash tables configured (established 8192 bind 8192)386buildbot # [ 0.528069] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear)387buildbot # [ 0.529363] UDP hash table entries: 512 (order: 3, 32768 bytes, linear)388buildbot # [ 0.530480] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear)389buildbot # [ 0.531670] NET: Registered PF_UNIX/PF_LOCAL protocol family390buildbot # [ 0.532662] NET: Registered PF_XDP protocol family391buildbot # [ 0.533544] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]392buildbot # [ 0.534566] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]393buildbot # [ 0.535579] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]394buildbot # [ 0.536687] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff window]395buildbot # [ 0.537829] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]396buildbot # [ 0.539032] pci 0000:00:01.0: PIIX3: Enabling Passive Release397buildbot # [ 0.539999] pci 0000:00:00.0: Limiting direct PCI/PCI transfers398buildbot # [ 0.542445] ACPI: \_SB_.LNKD: Enabled at IRQ 11399buildbot # [ 0.545582] PCI: CLS 0 bytes, default 64400buildbot # [ 0.546571] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983d4fda2, max_idle_ns: 440795302975 ns401buildbot # [ 0.548337] Trying to unpack rootfs image as initramfs...402buildbot # [ 0.590627] Initialise system trusted keyrings403buildbot # [ 0.593256] workingset: timestamp_bits=40 max_order=18 bucket_order=0404buildbot # [ 0.614078] Key type asymmetric registered405buildbot # [ 0.617207] Asymmetric key parser 'x509' registered406buildbot # [ 0.618083] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)407buildbot # [ 0.621308] io scheduler mq-deadline registered408buildbot # [ 0.622091] io scheduler kyber registered409buildbot # [ 0.625802] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled410buildbot # [ 0.627109] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A411buildbot # [ 0.630986] Linux agpgart interface v0.103412buildbot # [ 0.631772] ACPI: bus type drm_connector registered413buildbot # [ 0.636606] usbcore: registered new interface driver usbserial_generic414buildbot # [ 0.637721] usbserial: USB Serial support registered for generic415buildbot # [ 0.640211] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.416buildbot # [ 0.640211] Please enable it if your BIOS has the CPPC option.417buildbot # [ 0.642470] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled418buildbot # [ 0.645324] drop_monitor: Initializing network drop monitor service419buildbot # [ 0.646478] NET: Registered PF_INET6 protocol family420buildbot # [ 0.651485] Segment Routing with IPv6421buildbot # [ 0.652158] In-situ OAM (IOAM) with IPv6422buildbot # [ 0.654487] IPI shorthand broadcast: enabled423buildbot # [ 0.662780] sched_clock: Marking stable (531016373, 131182930)->(735279632, -73080329)424buildbot # [ 0.666333] registered taskstats version 1425buildbot # [ 0.667362] Loading compiled-in X.509 certificates426buildbot # [ 0.685232] Demotion targets for Node 0: null427buildbot # [ 0.687246] Key type .fscrypt registered428buildbot # [ 0.687926] Key type fscrypt-provisioning registered429buildbot # [ 0.691317] ima: No TPM chip found, activating TPM-bypass!430buildbot # [ 0.692257] ima: Allocated hash algorithm: sha1431buildbot # [ 0.693058] ima: No architecture policies found432buildbot # [ 0.697293] PM: Magic number: 2:234:315433buildbot # [ 0.697999] tty tty40: hash matches434buildbot # [ 0.701562] RAS: Correctable Errors collector initialized.435buildbot # [ 0.710228] clk: Disabling unused clocks436buildbot # [ 0.710911] PM: genpd: Disabling unused power domains437buildbot # [ 0.857348] Freeing initrd memory: 27736K438buildbot # [ 0.860602] Freeing unused decrypted memory: 2028K439buildbot # [ 0.863284] Freeing unused kernel image (initmem) memory: 3636K440buildbot # [ 0.864394] Write protecting the kernel read-only data: 32768k441buildbot # [ 0.866321] Freeing unused kernel image (text/rodata gap) memory: 1272K442buildbot # [ 0.867880] Freeing unused kernel image (rodata/data gap) memory: 776K443buildbot # [ 0.919005] x86/mm: Checked W+X mappings: passed, no W+X pages found.444buildbot # [ 0.920136] Run /init as init process445buildbot # [ 0.930426] systemd[1]: Inserted module 'autofs4'446buildbot # [ 0.946075] fuse: init (API version 7.45)447buildbot # [ 0.952922] ACPI: \_SB_.LNKC: Enabled at IRQ 10448buildbot # [ 0.959555] ACPI: \_SB_.LNKA: Enabled at IRQ 10449buildbot # [ 0.962695] ACPI: \_SB_.LNKB: Enabled at IRQ 11450buildbot # [ 0.994956] systemd[1]: Successfully made /usr/ read-only.451buildbot # [ 1.330666] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)452buildbot # [ 1.335693] systemd[1]: Detected virtualization kvm.453buildbot # [ 1.336580] systemd[1]: Detected architecture x86-64.454buildbot # [ 1.337473] systemd[1]: Running in initrd.455buildbot # [ 1.338599] systemd[1]: Initializing machine ID from random generator.456buildbot # [ 1.339806] systemd[1]: Hostname set to <buildbot>.457buildbot # [ 1.384413] systemd[1]: Queued start job for default target Initrd Default Target.458buildbot # [ 1.388419] systemd[1]: Created slice Slice /system/modprobe.459buildbot # [ 1.389604] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.460buildbot # [ 1.391042] systemd[1]: Expecting device /dev/disk/by-label/nixos...461buildbot # [ 1.392144] systemd[1]: Reached target Path Units.462buildbot # [ 1.393010] systemd[1]: Reached target Slice Units.463buildbot # [ 1.393892] systemd[1]: Reached target Swaps.464buildbot # [ 1.394700] systemd[1]: Reached target Timer Units.465buildbot # [ 1.395672] systemd[1]: Listening on D-Bus System Message Bus Socket.466buildbot # [ 1.396878] systemd[1]: Listening on Journal Socket (/dev/log).467buildbot # [ 1.398003] systemd[1]: Listening on Journal Sockets.468buildbot # [ 1.399008] systemd[1]: Listening on udev Control Socket.469buildbot # [ 1.400023] systemd[1]: Listening on udev Kernel Socket.470buildbot # [ 1.400942] systemd[1]: Reached target Socket Units.471buildbot # [ 1.402702] systemd[1]: Starting Create List of Static Device Nodes...472buildbot # [ 1.407268] systemd[1]: Starting Load Kernel Module 9pnet_virtio...473buildbot # [ 1.414392] systemd[1]: Starting Load Kernel Module configfs...474buildbot # [ 1.428307] systemd[1]: Starting Journal Service...475buildbot # [ 1.436095] systemd[1]: Starting Load Kernel Modules...476buildbot # [ 1.445254] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki477buildbot # [ 1.451176] netfs: FS-Cache loaded478buildbot # [ 1.458410] systemd[1]: Starting Coldplug All udev Devices...479buildbot # [ 1.469811] 9pnet: Installing 9P2000 support480buildbot # [ 1.474510] systemd[1]: Finished Create List of Static Device Nodes.481buildbot # [ 1.481148] systemd[1]: modprobe@configfs.service: Deactivated successfully.482buildbot # [ 1.490403] systemd-journald[67]: Collecting audit messages is disabled.483buildbot # [ 1.503692] systemd[1]: Finished Load Kernel Module configfs.484buildbot # [ 1.509663] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.485buildbot # [ 1.514579] systemd[1]: Finished Load Kernel Module 9pnet_virtio.486buildbot # [ 1.517666] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config487buildbot # [ 1.519873] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.488buildbot # [ 1.526300] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...489buildbot # [ 1.527630] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev490buildbot # [ 1.550672] systemd[1]: Finished Load Kernel Modules.491buildbot # [ 1.556287] systemd[1]: Starting Apply Kernel Variables...492buildbot # [ 1.571654] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.493buildbot # [ 1.582389] systemd[1]: Starting Create Static Device Nodes in /dev...494buildbot # [ 1.593762] systemd[1]: Finished Apply Kernel Variables.495buildbot # [ 1.615737] systemd[1]: Finished Create Static Device Nodes in /dev.496buildbot # [ 1.619406] systemd[1]: Reached target Preparation for Local File Systems.497buildbot # [ 1.623272] systemd[1]: Reached target Local File Systems.498buildbot # [ 1.629409] systemd[1]: Starting Rule-based Manager for Device Events and Files...499buildbot # [ 1.516292] systemd-modules-load[68]: Inserted module 'dm_mod'500buildbot # [ 1.518386] systemd-modules-load[68]: Inserted module 'virtio_balloon'501buildbot # [ 1.650473] systemd[1]: Started Journal Service.502buildbot # [ 1.521328] systemd-modules-load[68]: Inserted module 'virtio_gpu'503buildbot # [ 1.536381] systemd[1]: Starting Create System Files and Directories...504buildbot # [ 1.561237] systemd-udevd[76]: Using default interface naming scheme 'v260'.505buildbot # [ 1.566124] systemd[1]: Finished Create System Files and Directories.506buildbot # [ 1.590389] systemd[1]: Started Rule-based Manager for Device Events and Files.507buildbot # [ 1.665108] systemd[1]: Finished Coldplug All udev Devices.508buildbot # [ 1.666129] systemd[1]: Reached target System Initialization.509buildbot # [ 1.666932] systemd[1]: Reached target Basic System.510buildbot # [ 1.966734] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12511buildbot # [ 1.986863] serio: i8042 KBD port at 0x60,0x64 irq 1512buildbot # [ 2.002212] serio: i8042 AUX port at 0x60,0x64 irq 12513buildbot # [ 2.004816] virtio_blk virtio5: 1/0/0 default/read/poll queues514buildbot # [ 2.027846] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB)515buildbot # [ 2.049701] SCSI subsystem initialized516buildbot # [ 2.055510] uhci_hcd 0000:00:01.2: UHCI Host Controller517buildbot # [ 2.068063] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1518buildbot # [ 2.069758] uhci_hcd 0000:00:01.2: detected 2 ports519buildbot # [ 2.080653] uhci_hcd 0000:00:01.2: irq 11, io port 0x0000c100520buildbot # [ 1.959277] (udev-worker)[93]: Network interface NamePolicy= disabled on kernel command line.521buildbot # [ 2.094242] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18522buildbot # [ 2.095396] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1523buildbot # [ 2.099207] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0524buildbot # [ 1.970847] systemd[1]: Starting Virtual Console Setup...525buildbot # [ 1.984051] (udev-worker)[88]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.526buildbot # [ 1.986529] (udev-worker)[88]: Network interface NamePolicy= disabled on kernel command line.527buildbot # [ 2.130265] usb usb1: Product: UHCI Host Controller528buildbot # [ 2.131044] usb usb1: Manufacturer: Linux 6.18.38 uhci_hcd529buildbot # [ 2.007355] systemd-vconsole-setup[100]: Configuration of first virtual console was skipped, ignoring remaining ones.530buildbot # [ 2.011109] systemd[1]: Finished Virtual Console Setup.531buildbot # [ 2.148248] usb usb1: SerialNumber: 0000:00:01.2532buildbot # [ 2.155254] hub 1-0:1.0: USB hub found533buildbot # [ 2.028783] systemd[1]: Found device /dev/disk/by-label/nixos.534buildbot # [ 2.029819] systemd[1]: Reached target Initrd Root Device.535buildbot # [ 2.162213] hub 1-0:1.0: 2 ports detected536buildbot # [ 2.032414] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...537buildbot # [ 2.065810] systemd-fsck[108]: nixos: clean, 12/65536 files, 13019/262144 blocks538buildbot # [ 2.201919] scsi host0: ata_piix539buildbot # [ 2.073600] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.540buildbot # [ 2.208068] scsi host1: ata_piix541buildbot # [ 2.209829] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1e0 irq 14 lpm-pol 0542buildbot # [ 2.211501] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1e8 irq 15 lpm-pol 0543buildbot # [ 2.369347] ata2: found unknown device (class 0)544buildbot # [ 2.370773] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100545buildbot # [ 2.372719] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5546buildbot # [ 2.385294] usb 1-1: new full-speed USB device number 2 using uhci_hcd547buildbot # [ 2.400656] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray548buildbot # [ 2.409437] cdrom: Uniform CD-ROM driver Revision: 3.20549buildbot # [ 2.337494] systemd[1]: Mounting /sysroot...550buildbot # [ 2.553574] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00551buildbot # [ 2.554792] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10552buildbot # [ 2.556087] usb 1-1: Product: QEMU USB Tablet553buildbot # [ 2.556940] usb 1-1: Manufacturer: QEMU554buildbot # [ 2.557668] usb 1-1: SerialNumber: 28754-0000:00:01.2-1555buildbot # [ 2.561227] EXT4-fs (vda): mounted filesystem f5731ac2-b611-4867-9204-43f26d828d04 r/w with ordered data mode. Quota mode: none.556buildbot # [ 2.436865] systemd[1]: Mounted /sysroot.557buildbot # [ 2.437618] systemd[1]: Reached target Initrd Root File System.558buildbot # [ 2.442849] systemd[1]: Mounting /sysroot/nix/.ro-store...559buildbot # [ 2.448745] systemd[1]: Mounting /sysroot/nix/.rw-store...560buildbot # [ 2.453765] systemd[1]: Mounting /sysroot/run...561buildbot # [ 2.586932] hid: raw HID events driver (C) Jiri Kosina562buildbot # [ 2.460514] systemd[1]: Mounting /sysroot/tmp/shared...563buildbot # [ 2.467164] systemd[1]: Mounting /sysroot/tmp/xchg...564buildbot # [ 2.599645] usbcore: registered new interface driver usbhid565buildbot # [ 2.602891] usbhid: USB HID core driver566buildbot # [ 2.610407] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2567buildbot # [ 2.482450] systemd[1]: Starting Mountpoints Configured in the Real Root...568buildbot # [ 2.616314] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0569buildbot # [ 2.524180] systemd-sysroot-fstab-check[130]: /sysroot should be mounted in the initrd, will request daemon-reload.570buildbot # [ 2.528803] systemd[1]: Mounted /sysroot/nix/.rw-store.571buildbot # [ 2.529597] systemd[1]: Mounted /sysroot/run.572buildbot # [ 2.670270] 9p: Installing v9fs 9p2000 file system support573buildbot # [ 2.542068] systemd[1]: Reload requested from client PID 130 ('systemd-sysroot') (unit initrd-parse-etc.service)...574buildbot # [ 2.543562] systemd[1]: Reloading...575buildbot # [ 2.616171] systemd[1]: Reloading finished in 71 ms.576buildbot # [ 2.622925] systemd-sysroot-fstab-check[130]: Requesting initrd-fs.target/start/replace...577buildbot # [ 2.626059] systemd[1]: Mounted /sysroot/nix/.ro-store.578buildbot # [ 2.626839] systemd[1]: Mounted /sysroot/tmp/shared.579buildbot # [ 2.627604] systemd[1]: Mounted /sysroot/tmp/xchg.580buildbot # [ 2.630775] systemd-sysroot-fstab-check[130]: Requesting swap.target/start/replace...581buildbot # [ 2.633459] systemd[1]: Starting rw-sysroot-nix-store.service...582buildbot # [ 2.634739] systemd[1]: initrd-parse-etc.service: Deactivated successfully.583buildbot # [ 2.637436] systemd[1]: Finished Mountpoints Configured in the Real Root.584buildbot # [ 2.638484] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.585buildbot # [ 2.648359] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.586buildbot # [ 2.649783] systemd[1]: Finished rw-sysroot-nix-store.service.587buildbot # [ 3.338092] systemd[1]: Mounting /sysroot/nix/store...588buildbot # [ 3.357443] systemd[1]: Mounted /sysroot/nix/store.589buildbot # [ 3.358765] systemd[1]: Reached target Initrd File Systems.590buildbot # [ 3.361097] systemd[1]: Starting Find NixOS closure...591buildbot # [ 3.363337] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...592buildbot # [ 3.379994] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.593buildbot # [ 3.381653] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.594buildbot # [ 3.389976] systemd[1]: Finished Find NixOS closure.595buildbot # [ 3.392116] systemd[1]: Reached target Initrd Default Target.596buildbot # [ 3.393143] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...597buildbot # [ 3.407416] systemd[1]: Stopped target Initrd Default Target.598buildbot # [ 3.408281] systemd[1]: Stopped target Basic System.599buildbot # [ 3.409049] systemd[1]: Stopped target Initrd Root Device.600buildbot # [ 3.409767] systemd[1]: Stopped target Path Units.601buildbot # [ 3.410498] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.602buildbot # [ 3.411515] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.603buildbot # [ 3.412942] systemd[1]: Stopped target Slice Units.604buildbot # [ 3.413967] systemd[1]: Stopped target Socket Units.605buildbot # [ 3.414949] systemd[1]: Stopped target System Initialization.606buildbot # [ 3.416113] systemd[1]: Stopped target Swaps.607buildbot # [ 3.416825] systemd[1]: Stopped target Timer Units.608buildbot # [ 3.417820] systemd[1]: dbus.socket: Deactivated successfully.609buildbot # [ 3.418802] systemd[1]: Closed D-Bus System Message Bus Socket.610buildbot # [ 3.419929] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.611buildbot # [ 3.421156] systemd[1]: Stopped Find NixOS closure.612buildbot # [ 3.422101] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio613buildbot # [ 3.424105] systemd[1]: Starting rw-sysroot-nix-store.service...614buildbot # [ 3.424947] systemd[1]: systemd-sysctl.service: Deactivated successfully.615buildbot # [ 3.426281] systemd[1]: Stopped Apply Kernel Variables.616buildbot # [ 3.428218] systemd[1]: systemd-modules-load.service: Deactivated successfully.617buildbot # [ 3.429177] systemd[1]: Stopped Load Kernel Modules.618buildbot # [ 3.429835] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.619buildbot # [ 3.430836] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.620buildbot # [ 3.431874] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.621buildbot # [ 3.432841] systemd[1]: Stopped Create System Files and Directories.622buildbot # [ 3.434145] systemd[1]: Stopped target Local File Systems.623buildbot # [ 3.434883] systemd[1]: Stopped target Preparation for Local File Systems.624buildbot # [ 3.435802] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.625buildbot # [ 3.437258] systemd[1]: Stopped Coldplug All udev Devices.626buildbot # [ 3.439485] systemd[1]: Stopping Rule-based Manager for Device Events and Files...627buildbot # [ 3.440546] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.628buildbot # [ 3.443060] systemd[1]: Stopped Virtual Console Setup.629buildbot # [ 3.451693] systemd[1]: initrd-cleanup.service: Deactivated successfully.630buildbot # [ 3.455061] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.631buildbot # [ 3.459212] systemd[1]: systemd-udevd.service: Deactivated successfully.632buildbot # [ 3.460764] systemd[1]: Stopped Rule-based Manager for Device Events and Files.633buildbot # [ 3.462299] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.634buildbot # [ 3.463693] systemd[1]: Finished rw-sysroot-nix-store.service.635buildbot # [ 3.466120] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.636buildbot # [ 3.467148] systemd[1]: Closed udev Control Socket.637buildbot # [ 3.468452] systemd[1]: Starting Cleanup udev Database...638buildbot # [ 3.469325] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.639buildbot # [ 3.470422] systemd[1]: Stopped Create Static Device Nodes in /dev.640buildbot # [ 3.472276] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.641buildbot # [ 3.473846] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.642buildbot # [ 3.474845] systemd[1]: kmod-static-nodes.service: Deactivated successfully.643buildbot # [ 3.475766] systemd[1]: Stopped Create List of Static Device Nodes.644buildbot # [ 3.490407] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.645buildbot # [ 3.492075] systemd[1]: Finished Cleanup udev Database.646buildbot # [ 3.492803] systemd[1]: Reached target Switch Root.647buildbot # [ 3.494415] systemd[1]: Starting NixOS Activation...648buildbot # [ 3.669278] initrd-nixos-activation-start[180]: booting system configuration /nix/store/ffn8xixg4rsw70hl01621d7ahnwls5k4-nixos-system-buildbot-test649buildbot # [ 3.739385] initrd-nixos-activation-start[180]: running activation script...650buildbot # [ 4.187928] initrd-nixos-activation-start[203]: setting up /etc...651buildbot # [ 4.468638] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.652buildbot # [ 4.471053] systemd[1]: Finished NixOS Activation.653buildbot # [ 4.472087] systemd[1]: Starting Switch Root...654buildbot # [ 4.485612] systemd[1]: Switching root.655buildbot # [ 4.634385] systemd-journald[67]: Received SIGTERM from PID 1 (systemd).656buildbot # [ 4.787349] NET: Registered PF_VSOCK protocol family657buildbot # [ 5.173146] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)658buildbot # [ 5.176989] systemd[1]: Detected virtualization kvm.659buildbot # [ 5.177721] systemd[1]: Detected architecture x86-64.660buildbot # [ 5.178507] systemd[1]: Detected first boot.661buildbot # [ 5.185144] systemd[1]: Initializing machine ID from random generator.662buildbot # [ 5.420003] systemd[1]: bpf-restrict-fs: LSM BPF program attached663buildbot # [ 5.546122] systemd[1]: Applying preset policy.664buildbot # [ 6.027697] systemd[1]: Populated /etc with preset unit settings.665buildbot # [ 6.518237] systemd[1]: initrd-switch-root.service: Deactivated successfully.666buildbot # [ 6.519596] systemd[1]: Stopped initrd-switch-root.service.667buildbot # [ 6.522343] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.668buildbot # [ 6.524325] systemd[1]: Created slice Slice /system/getty.669buildbot # [ 6.525627] systemd[1]: Created slice User and Session Slice.670buildbot # [ 6.526551] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.671buildbot # [ 6.527760] systemd[1]: Started Forward Password Requests to Wall Directory Watch.672buildbot # [ 6.528834] systemd[1]: Expecting device /dev/hvc0...673buildbot # [ 6.529559] systemd[1]: Expecting device /dev/ttyS0...674buildbot # [ 6.530320] systemd[1]: Reached target Local Encrypted Volumes.675buildbot # [ 6.531109] systemd[1]: Stopped target initrd-fs.target.676buildbot # [ 6.531835] systemd[1]: Stopped target initrd-root-fs.target.677buildbot # [ 6.532626] systemd[1]: Stopped target initrd-switch-root.target.678buildbot # [ 6.533482] systemd[1]: Reached target Virtual Machines and Containers.679buildbot # [ 6.534375] systemd[1]: Reached target Path Units.680buildbot # [ 6.535064] systemd[1]: Reached target Remote File Systems.681buildbot # [ 6.535849] systemd[1]: Reached target Slice Units.682buildbot # [ 6.536553] systemd[1]: Reached target Swaps.683buildbot # [ 6.540133] systemd[1]: Listening on Query the User Interactively for a Password.684buildbot # [ 6.544616] systemd[1]: Listening on Process Core Dump Socket.685buildbot # [ 6.548097] systemd[1]: Listening on Credential Encryption/Decryption.686buildbot # [ 6.551308] systemd[1]: Listening on Factory Reset Management.687buildbot # [ 6.555834] systemd[1]: Starting Journal Log Access Socket...688buildbot # [ 6.557329] systemd[1]: Listening on Journal Audit Socket.689buildbot # [ 6.560913] systemd[1]: Listening on Console Output Muting Service Socket.690buildbot # [ 6.562063] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.691buildbot # [ 6.563256] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki692buildbot # [ 6.564850] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki693buildbot # [ 6.577114] systemd[1]: Listening on Disk Repartitioning Service Socket.694buildbot # [ 6.578116] systemd[1]: Listening on udev Control Socket.695buildbot # [ 6.578982] systemd[1]: Listening on udev Varlink Socket.696buildbot # [ 6.582879] systemd[1]: Mounting Huge Pages File System...697buildbot # [ 6.586148] systemd[1]: Mounting POSIX Message Queue File System...698buildbot # [ 6.589165] systemd[1]: Mounting Kernel Debug File System...699buildbot # [ 6.595363] systemd[1]: Mounting Kernel Trace File System...700buildbot # [ 6.604753] systemd[1]: Starting Create List of Static Device Nodes...701buildbot # [ 6.607418] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio702buildbot # [ 6.612275] systemd[1]: Starting Load Kernel Module configfs...703buildbot # [ 6.614292] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm704buildbot # [ 6.619210] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore705buildbot # [ 6.621507] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse706buildbot # [ 6.631533] systemd[1]: Mounting FUSE Control File System...707buildbot # [ 6.632710] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67708buildbot # [ 6.643001] systemd[1]: Starting Journal Service...709buildbot # [ 6.672119] systemd[1]: Starting Load Kernel Modules...710buildbot # [ 6.698349] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...711buildbot # [ 6.719720] systemd[1]: Starting Remount Root and Kernel File Systems...712buildbot # [ 6.724437] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki713buildbot # [ 6.739833] systemd[1]: Starting Coldplug All udev Devices...714buildbot # [ 6.757973] systemd[1]: Listening on Journal Log Access Socket.715buildbot # [ 6.768031] loop: module loaded716buildbot # [ 6.768715] systemd[1]: Mounted Huge Pages File System.717buildbot # [ 6.771593] systemd-journald[272]: Collecting audit messages is enabled.718buildbot # [ 6.773043] systemd[1]: Mounted POSIX Message Queue File System.719buildbot # [ 6.777319] systemd[1]: Mounted Kernel Debug File System.720buildbot # [ 6.783923] systemd[1]: Mounted Kernel Trace File System.721buildbot # [ 6.790330] systemd[1]: Finished Create List of Static Device Nodes.722buildbot # [ 6.795912] systemd[1]: modprobe@configfs.service: Deactivated successfully.723buildbot # [ 6.802279] EXT4-fs (vda): re-mounted f5731ac2-b611-4867-9204-43f26d828d04.724buildbot # [ 6.803829] systemd[1]: Finished Load Kernel Module configfs.725buildbot # [ 6.679534] systemd[1]: Queued start job for default target Multi-User System.726buildbot # [ 6.812475] systemd[1]: Started Journal Service.727buildbot # [ 6.682426] systemd[1]: systemd-journald.service: Deactivated successfully.728buildbot # [ 6.687134] systemd-modules-load[273]: Inserted module 'loop'729buildbot # [ 6.688714] systemd-modules-load[273]: Inserted module 'tls'730buildbot # [ 6.691736] systemd[1]: Mounted FUSE Control File System.731buildbot # [ 6.695942] systemd[1]: Finished Remount Root and Kernel File Systems.732buildbot # [ 6.701094] systemd[1]: Finished Load Kernel Modules.733buildbot # [ 6.713082] systemd[1]: Listening on Disk Image Download Service Socket.734buildbot # [ 6.721564] systemd[1]: Mounting Kernel Configuration File System...735buildbot # [ 6.724212] systemd[1]: Starting Flush Journal to Persistent Storage...736buildbot # [ 6.725592] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore737buildbot # [ 6.736906] systemd[1]: Starting Load/Save OS Random Seed...738buildbot # [ 6.740515] systemd-oomd[274]: No swap; memory pressure usage will be degraded739buildbot # [ 6.745413] systemd[1]: Starting Apply Kernel Variables...740buildbot # [ 6.763793] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...741buildbot # [ 6.764964] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki742buildbot # [ 6.766234] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.743buildbot # [ 6.936433] systemd-journald[272]: Received client request to flush runtime journal.744buildbot # [ 6.902281] systemd[1]: Mounted Kernel Configuration File System.745buildbot # [ 6.904603] systemd[1]: Finished Load/Save OS Random Seed.746buildbot # [ 6.906542] systemd[1]: Reached target First Boot Complete.747buildbot # [ 6.909286] systemd[1]: Finished Apply Kernel Variables.748buildbot # [ 6.910242] systemd[1]: Finished Flush Journal to Persistent Storage.749buildbot # [ 6.927072] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.750buildbot # [ 6.929478] systemd[1]: Starting Create Static Device Nodes in /dev...751buildbot # [ 7.002077] systemd[1]: Finished Create Static Device Nodes in /dev.752buildbot # [ 7.003108] systemd[1]: Reached target Preparation for Local File Systems.753buildbot # [ 7.008326] systemd[1]: Starting Rule-based Manager for Device Events and Files...754buildbot # [ 7.017496] systemd[1]: Finished Coldplug All udev Devices.755buildbot # [ 7.082447] systemd-udevd[304]: Using default interface naming scheme 'v260'.756buildbot # [ 7.183901] systemd[1]: Started Rule-based Manager for Device Events and Files.757buildbot # [ 7.268538] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse758buildbot # [ 7.315077] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.759buildbot # [ 7.329699] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.760buildbot # [ 7.365311] (udev-worker)[313]: Network interface NamePolicy= disabled on kernel command line.761buildbot # [ 7.368145] (udev-worker)[307]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.762buildbot # [ 7.370261] (udev-worker)[307]: Network interface NamePolicy= disabled on kernel command line.763buildbot # [ 7.391461] systemd[1]: Mounting /run/wrappers...764buildbot # [ 7.429370] systemd[1]: Mounted /run/wrappers.765buildbot # [ 7.430856] systemd[1]: Reached target Local File Systems.766buildbot # [ 7.435684] systemd[1]: Listening on Boot Loader Control Service Socket.767buildbot # [ 7.437993] systemd[1]: Starting register-nix-paths.service...768buildbot # [ 7.444036] systemd[1]: Starting Create SUID/SGID Wrappers...769buildbot # [ 7.444895] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.770buildbot # [ 7.449862] systemd[1]: Starting Save Transient machine-id to Disk...771buildbot # [ 7.456178] systemd[1]: Starting Create System Files and Directories...772buildbot # [ 7.543785] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.773buildbot # [ 7.551296] systemd[1]: Finished Save Transient machine-id to Disk.774buildbot # [ 7.567748] systemd[1]: Condition check resulted in Virtio network device being skipped.775buildbot # [ 7.568864] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore776buildbot # [ 7.570624] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.777buildbot # [ 7.573255] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67778buildbot # [ 7.575769] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore779buildbot # [ 7.577834] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki780buildbot # [ 7.581960] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki781buildbot # [ 7.611297] systemd[1]: Finished Create System Files and Directories.782buildbot # [ 7.621099] systemd[1]: Starting Rebuild Journal Catalog...783buildbot # [ 7.624497] systemd[1]: Starting Record System Boot/Shutdown in UTMP...784buildbot # [ 7.694781] systemd[1]: Finished Record System Boot/Shutdown in UTMP.785buildbot # [ 7.862068] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3786buildbot # [ 7.743095] systemd[1]: Finished Rebuild Journal Catalog.787buildbot # [ 7.748389] systemd[1]: Starting Update is Completed...788buildbot # [ 7.898221] ACPI: button: Power Button [PWRF]789buildbot # [ 7.915446] mousedev: PS/2 mouse device common for all mice790buildbot # [ 7.804891] systemd[1]: Finished Update is Completed.791buildbot # [ 7.944003] rtc_cmos 00:05: RTC can wake from S4792buildbot # [ 7.959065] rtc_cmos 00:05: registered as rtc0793buildbot # [ 7.968028] rtc_cmos 00:05: setting system clock to 2026-07-19T05:18:40 UTC (1784438320)794buildbot # [ 7.969734] systemd-journald[272]: Time jumped backwards, rotating.795buildbot # [ 7.978944] Floppy drive(s): fd0 is 2.88M AMI BIOS796buildbot # [ 7.981516] parport_pc 00:03: reported by Plug and Play ACPI797buildbot # [ 8.007452] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs798buildbot # [ 8.030906] FDC 0 is a S82078B799buildbot # [ 8.079684] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console800buildbot # [ 8.093128] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0801buildbot # [ 8.111645] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD802buildbot # [ 8.129870] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:0a.0/virtio7/input/input4803buildbot # [ 8.161583] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]804buildbot # [ 8.194629] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6805buildbot # [ 8.194859] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5806buildbot # [ 8.154308] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.807buildbot # [ 8.231651] Console: switching to colour dummy device 80x25808buildbot # [ 8.288344] [drm] Found bochs VGA, ID 0xb0c5.809buildbot # [ 8.288346] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.810buildbot # [ 8.158759] systemd[1]: Finished Create SUID/SGID Wrappers.811buildbot # [ 8.303881] bochs-drm 0000:00:02.0: [drm] Registered 1 planes with drm panic812buildbot # [ 8.304632] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0813buildbot # [ 8.191873] systemd[1]: Starting Virtual Console Setup...814buildbot # [ 8.357952] fbcon: bochs-drmdrmfb (fb0) is primary device815buildbot # [ 8.421632] Console: switching to colour frame buffer device 160x50816buildbot # [ 8.442491] ppdev: user-space parallel port driver817buildbot # [ 8.448964] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device818buildbot # [ 8.322957] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.819buildbot # [ 8.324176] systemd[1]: Stopped Virtual Console Setup.820buildbot # [ 8.330199] systemd[1]: Starting Virtual Console Setup...821buildbot # [ 8.385544] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.822buildbot # [ 8.388383] systemd[1]: Stopped Virtual Console Setup.823buildbot # [ 8.398480] systemd[1]: Starting Virtual Console Setup...824buildbot # [ 8.622931] kvm_amd: TSC scaling supported825buildbot # [ 8.624707] kvm_amd: Nested Virtualization enabled826buildbot # [ 8.626069] kvm_amd: Nested Paging enabled827buildbot # [ 8.627453] kvm_amd: LBR virtualization supported828buildbot # [ 8.627967] kvm_amd: Virtual VMLOAD VMSAVE supported829buildbot # [ 8.630001] kvm_amd: Virtual GIF supported830buildbot # [ 8.631196] kvm_amd: Virtual NMI enabled831buildbot # [ 8.685825] EDAC MC: Ver: 3.0.0832buildbot # [ 8.581644] systemd[1]: Finished register-nix-paths.service.833buildbot # [ 9.077754] systemd-vconsole-setup[406]: Configuration of first virtual console was skipped, ignoring remaining ones.834buildbot # [ 9.082299] systemd[1]: Finished Virtual Console Setup.835buildbot # [ 9.084121] systemd[1]: Reached target System Initialization.836buildbot # [ 9.085232] systemd[1]: Started Discard unused filesystem blocks once a week.837buildbot # [ 9.086603] systemd[1]: Started Daily Cleanup of Temporary Directories.838buildbot # [ 9.087587] systemd[1]: Reached target Timer Units.839buildbot # [ 9.088738] systemd[1]: Listening on D-Bus System Message Bus Socket.840buildbot # [ 9.089753] systemd[1]: Listening on Nix Daemon Socket.841buildbot # [ 9.093069] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).842buildbot # [ 9.094332] systemd[1]: Listening on Hostname Service Socket.843buildbot # [ 9.096127] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.844buildbot # [ 9.097243] systemd[1]: Reached target Socket Units.845buildbot # [ 9.097956] systemd[1]: Reached target Basic System.846buildbot # [ 9.100677] systemd[1]: Started backdoor.service.847buildbot # [ 9.103985] systemd[1]: Starting Import lastlog data into lastlog2 database...848buildbot # [ 9.107398] systemd[1]: Starting Name Service Cache Daemon (nsncd)...849buildbot # [ 9.111554] systemd[1]: Starting Post-Boot Actions...850buildbot # [ 9.118981] systemd[1]: Started Reset console on configuration changes.851buildbot # [ 9.125150] systemd[1]: Starting resolvconf update...852buildbot # [ 9.126383] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met.853buildbot # [ 9.147060] systemd[1]: Starting D-Bus System Message Bus...854buildbot # [ 9.201401] systemd[1]: Finished Post-Boot Actions.855buildbot # connecting to host...856buildbot # [ 9.228867] systemd[1]: Started Name Service Cache Daemon (nsncd).857buildbot # [ 9.230375] nsncd[413]: Jul 19 05:18:41.889 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"858buildbot # [ 9.233591] systemd[1]: Reached target Host and Network Name Lookups.859buildbot # [ 9.234740] systemd[1]: Reached target User and Group Name Lookups.860buildbot # [ 9.246724] systemd[1]: Starting User Login Management...861buildbot # [ 9.248229] systemd[1]: Finished Import lastlog data into lastlog2 database.862buildbot: Guest shell says: b'Spawning backdoor root shell...\n'863buildbot: connected to guest root shell864buildbot: (connecting took 9.95 seconds)865buildbot: (finished: waiting for the VM to finish booting, in 10.18 seconds)866buildbot # [ 9.305373] dbus-broker-launch[418]: Looking up NSS user entry for 'systemd-timesync'...867buildbot # [ 9.327035] dbus-broker-launch[418]: NSS returned no entry for 'systemd-timesync'868buildbot # [ 9.328362] dbus-broker-launch[418]: Invalid user-name in /nix/store/182vzgard5sbqlk0s3kdzmcpg2461hc3-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"869buildbot # [ 9.363036] systemd-logind[439]: New seat seat0.870buildbot # [ 9.370085] systemd-logind[439]: Watching system buttons on /dev/input/event2 (Power Button)871buildbot # [ 9.371482] systemd-logind[439]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)872buildbot # [ 9.373491] systemd-logind[439]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)873buildbot # [ 9.376874] systemd[1]: Started D-Bus System Message Bus.874buildbot # [ 9.408360] dbus-broker-launch[418]: Ready875buildbot # [ 9.411155] systemd[1]: Started User Login Management.876buildbot # [ 9.418241] systemd[1]: Stopped target Host and Network Name Lookups.877buildbot # [ 9.419630] systemd[1]: Stopping Host and Network Name Lookups...878buildbot # [ 9.420595] systemd[1]: Stopped target User and Group Name Lookups.879buildbot # [ 9.421896] systemd[1]: Stopping User and Group Name Lookups...880buildbot # [ 9.427469] systemd[1]: Starting linger-users.service...881buildbot # [ 9.428316] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...882buildbot # [ 9.432126] systemd[1]: nscd.service: Deactivated successfully.883buildbot # [ 9.434769] systemd[1]: Stopped Name Service Cache Daemon (nsncd).884buildbot # [ 9.449293] systemd[1]: Starting Name Service Cache Daemon (nsncd)...885buildbot # [ 9.489167] systemd[1]: linger-users.service: Deactivated successfully.886buildbot # [ 9.491554] systemd[1]: Finished linger-users.service.887buildbot # [ 9.504620] systemd[1]: Started Name Service Cache Daemon (nsncd).888buildbot # [ 9.505857] nsncd[493]: Jul 19 05:18:42.167 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"889buildbot # [ 9.508491] systemd[1]: Reached target Host and Network Name Lookups.890buildbot # [ 9.509461] systemd[1]: Reached target User and Group Name Lookups.891buildbot # [ 9.526183] systemd[1]: Finished resolvconf update.892buildbot # [ 9.526873] systemd[1]: Reached target Preparation for Network.893buildbot # [ 9.532068] systemd[1]: Starting DHCP Client...894buildbot # [ 9.534786] systemd[1]: Starting Address configuration of eth1...895buildbot # [ 9.538559] systemd[1]: Starting Extra networking commands....896buildbot # [ 9.657296] network-addresses-eth1-start[517]: adding address 192.168.1.1/24... done897buildbot # [ 9.676300] network-addresses-eth1-start[517]: adding address 2001:db8:1::1/64... done898buildbot # [ 9.697903] systemd[1]: Finished Address configuration of eth1.899buildbot # [ 9.704357] dhcpcd[524]: dhcpcd-10.3.2 starting900buildbot # [ 9.718349] dhcpcd[571]: dev: loaded udev901buildbot # [ 9.730563] systemd[1]: Finished Extra networking commands..902buildbot # [ 9.733364] systemd[1]: Reached target Network.903buildbot # [ 9.737411] systemd[1]: Starting Nginx Web Server...904buildbot # [ 9.741607] systemd[1]: Starting PostgreSQL Server...905buildbot # [ 9.747308] systemd[1]: Starting SSH Daemon...906buildbot # [ 9.754897] systemd[1]: Starting Permit User Sessions...907buildbot # [ 9.888864] 8021q: 802.1Q VLAN Support v1.8908buildbot # [ 9.892316] 8021q: adding VLAN 0 to HW filter on device eth1909buildbot # [ 9.821088] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.910buildbot # [ 9.841835] systemd[1]: Finished Permit User Sessions.911buildbot # [ 9.853170] systemd[1]: Started Getty on tty1.912buildbot # [ 9.853842] systemd[1]: Reached target Login Prompts.913buildbot # [ 9.884739] sshd[580]: Server listening on 0.0.0.0 port 22.914buildbot # [ 9.885640] sshd[580]: Server listening on :: port 22.915buildbot # [ 9.888418] systemd[1]: Started SSH Daemon.916buildbot # [ 9.893595] systemd[1]: Starting Setup git test repository with scheduled effects...917buildbot # [ 10.075433] cfg80211: Loading compiled-in X.509 certificates for regulatory database918buildbot # [ 10.112598] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'919buildbot # [ 10.113506] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'920buildbot # [ 10.117248] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2921buildbot # [ 10.118136] cfg80211: failed to load regulatory.db922buildbot # [ 10.045284] setup-git-repo-start[599]: hint: Using 'master' as the name for the initial branch. This default branch name923buildbot # [ 10.046936] setup-git-repo-start[599]: hint: will change to "main" in Git 3.0. To configure the initial branch name924buildbot # [ 10.049112] setup-git-repo-start[599]: hint: to use in all of your new repositories, which will suppress this warning,925buildbot # [ 10.050565] setup-git-repo-start[599]: hint: call:926buildbot # [ 10.051593] setup-git-repo-start[599]: hint:927buildbot # [ 10.054073] setup-git-repo-start[599]: hint: git config --global init.defaultBranch <name>928buildbot # [ 10.055161] setup-git-repo-start[599]: hint:929buildbot # [ 10.055707] setup-git-repo-start[599]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and930buildbot # [ 10.057175] setup-git-repo-start[599]: hint: 'development'. The just-created branch can be renamed via this command:931buildbot # [ 10.058442] setup-git-repo-start[599]: hint:932buildbot # [ 10.059310] setup-git-repo-start[599]: hint: git branch -m <name>933buildbot # [ 10.060335] setup-git-repo-start[599]: hint:934buildbot # [ 10.061588] setup-git-repo-start[599]: hint: Disable this message with "git config set advice.defaultBranchName false"935buildbot # [ 10.063711] setup-git-repo-start[599]: Initialized empty Git repository in /srv/repos/test-flake.git/936buildbot # [ 10.208380] 8021q: adding VLAN 0 to HW filter on device eth0937buildbot # [ 10.078532] dhcpcd[571]: eth0: waiting for carrier938buildbot # [ 10.080339] dhcpcd[571]: eth0: carrier acquired939buildbot # [ 10.095233] dhcpcd[571]: DUID 00:01:00:01:31:ef:1a:b2:52:54:00:12:34:56940buildbot # [ 10.096331] dhcpcd[571]: eth0: IAID 00:12:34:56941buildbot # [ 10.097676] dhcpcd[571]: eth0: adding address fe80::5054:ff:fe12:3456942buildbot # [ 10.114326] postgresql-pre-start[595]: The files belonging to this database system will be owned by user "postgres".943buildbot # [ 10.115799] postgresql-pre-start[595]: This user must also own the server process.944buildbot # [ 10.129605] postgresql-pre-start[595]: The database cluster will be initialized with locale "en_US.UTF-8".945buildbot # [ 10.130852] postgresql-pre-start[595]: The default database encoding has accordingly been set to "UTF8".946buildbot # [ 10.131938] postgresql-pre-start[595]: The default text search configuration will be set to "english".947buildbot # [ 10.133061] postgresql-pre-start[595]: Data page checksums are disabled.948buildbot # [ 10.133871] postgresql-pre-start[595]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok949buildbot # [ 10.135018] postgresql-pre-start[595]: creating subdirectories ... ok950buildbot # [ 10.136445] postgresql-pre-start[595]: selecting dynamic shared memory implementation ... posix951buildbot # [ 10.140834] nginx-pre-start[592]: nginx: the configuration file /nix/store/nljfc3np1hlmc33l0nkyf74jzbi0wmrf-nginx.conf syntax is ok952buildbot # [ 10.142577] nginx-pre-start[592]: nginx: configuration file /nix/store/nljfc3np1hlmc33l0nkyf74jzbi0wmrf-nginx.conf test is successful953buildbot # [ 10.147744] setup-git-repo-start[613]: hint: Using 'master' as the name for the initial branch. This default branch name954buildbot # [ 10.149222] setup-git-repo-start[613]: hint: will change to "main" in Git 3.0. To configure the initial branch name955buildbot # [ 10.150446] setup-git-repo-start[613]: hint: to use in all of your new repositories, which will suppress this warning,956buildbot # [ 10.151676] setup-git-repo-start[613]: hint: call:957buildbot # [ 10.152297] setup-git-repo-start[613]: hint:958buildbot # [ 10.152874] setup-git-repo-start[613]: hint: git config --global init.defaultBranch <name>959buildbot # [ 10.154827] setup-git-repo-start[613]: hint:960buildbot # [ 10.156478] setup-git-repo-start[613]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and961buildbot # [ 10.157883] setup-git-repo-start[613]: hint: 'development'. The just-created branch can be renamed via this command:962buildbot # [ 10.159523] setup-git-repo-start[613]: hint:963buildbot # [ 10.160310] setup-git-repo-start[613]: hint: git branch -m <name>964buildbot # [ 10.161864] setup-git-repo-start[613]: hint:965buildbot # [ 10.163068] setup-git-repo-start[613]: hint: Disable this message with "git config set advice.defaultBranchName false"966buildbot # [ 10.164388] setup-git-repo-start[613]: Initialized empty Git repository in /tmp/test-flake/.git/967buildbot # [ 10.168503] systemd[1]: Started Nginx Web Server.968buildbot # [ 10.249303] setup-git-repo-start[624]: [master (root-commit) 1277a93] Initial commit with scheduled effects969buildbot # [ 10.250645] setup-git-repo-start[624]: 3 files changed, 131 insertions(+)970buildbot # [ 10.251994] setup-git-repo-start[624]: create mode 100644 effects-lib.nix971buildbot # [ 10.254099] setup-git-repo-start[624]: create mode 100644 flake.lock972buildbot # [ 10.255038] setup-git-repo-start[624]: create mode 100644 flake.nix973buildbot # [ 10.290291] postgresql-pre-start[595]: selecting default "max_connections" ... 100974buildbot # [ 10.368943] setup-git-repo-start[628]: To /srv/repos/test-flake.git975buildbot # [ 10.370235] setup-git-repo-start[628]: * [new branch] master -> master976buildbot # [ 10.371765] setup-git-repo-start[628]: branch 'master' set up to track 'origin/master'.977buildbot # [ 10.373702] postgresql-pre-start[595]: selecting default "shared_buffers" ... 128MB978buildbot # [ 10.377096] systemd[1]: Finished Setup git test repository with scheduled effects.979buildbot # [ 10.422377] dhcpcd[571]: eth0: soliciting a DHCP lease980buildbot # [ 10.578565] NET: Registered PF_PACKET protocol family981buildbot # [ 10.452579] dhcpcd[571]: eth0: offered 10.0.2.15 from 10.0.2.2982buildbot # [ 10.455175] dhcpcd[571]: eth0: probing address 10.0.2.15/24983buildbot: (finished: waiting for unit sshd.service, in 11.45 seconds)984buildbot: waiting for unit setup-git-repo.service985buildbot: (finished: waiting for unit setup-git-repo.service, in 0.08 seconds)986buildbot: waiting for unit multi-user.target987buildbot # [ 11.985034] dhcpcd[571]: eth0: soliciting an IPv6 router988buildbot # [ 11.986349] dhcpcd[571]: eth0: Router Advertisement from fe80::2989buildbot # [ 11.987236] dhcpcd[571]: eth0: adding address fec0::5054:ff:fe12:3456/64990buildbot # [ 11.988195] dhcpcd[571]: eth0: adding route to fec0::/64991buildbot # [ 11.988964] dhcpcd[571]: eth0: adding default route via fe80::2992buildbot # [ 13.471663] postgresql-pre-start[595]: selecting default time zone ... UTC993buildbot # [ 13.477181] postgresql-pre-start[595]: creating configuration files ... ok994buildbot # [ 13.732995] postgresql-pre-start[595]: running bootstrap script ... ok995buildbot # [ 14.370091] postgresql-pre-start[595]: performing post-bootstrap initialization ... ok996buildbot # [ 14.546918] postgresql-pre-start[595]: syncing data to disk ... ok997buildbot # [ 14.548600] postgresql-pre-start[595]: initdb: warning: enabling "trust" authentication for local connections998buildbot # [ 14.549862] postgresql-pre-start[595]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb.999buildbot # [ 14.551634] postgresql-pre-start[595]: Success. You can now start the database server using:1000buildbot # [ 14.552658] postgresql-pre-start[595]: pg_ctl -D /var/lib/postgresql/17 -l logfile start1001buildbot # [ 14.683566] postgres[701]: [701] LOG: starting PostgreSQL 17.10 on x86_64-pc-linux-gnu, compiled by clang version 21.1.8, 64-bit1002buildbot # [ 14.698716] postgres[701]: [701] LOG: listening on IPv6 address "::1", port 54321003buildbot # [ 14.699775] postgres[701]: [701] LOG: listening on IPv4 address "127.0.0.1", port 54321004buildbot # [ 14.702735] postgres[701]: [701] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432"1005buildbot # [ 14.716610] postgres[707]: [707] LOG: database system was shut down at 2026-07-19 05:18:47 GMT1006buildbot # [ 14.721904] postgres[701]: [701] LOG: database system is ready to accept connections1007buildbot # [ 14.730643] systemd[1]: Started PostgreSQL Server.1008buildbot # [ 14.735387] systemd[1]: Starting PostgreSQL Setup Scripts...1009buildbot # [ 14.958281] postgresql-setup-start[718]: CREATE DATABASE1010buildbot # [ 15.012283] postgresql-setup-start[723]: CREATE ROLE1011buildbot # [ 15.039371] postgresql-setup-start[725]: ALTER DATABASE1012buildbot # [ 15.045711] systemd[1]: Finished PostgreSQL Setup Scripts.1013buildbot # [ 15.048198] systemd[1]: Reached target PostgreSQL.1014buildbot # [ 15.051304] systemd[1]: Starting Buildbot Continuous Integration Server....1015buildbot # [ 15.118638] buildbot-master-pre-start[733]: mkdir: created directory '/var/lib/buildbot/master'1016buildbot # [ 16.108688] dhcpcd[571]: eth0: leased 10.0.2.15 for 86400 seconds1017buildbot # [ 16.110205] dhcpcd[571]: eth0: adding route to 10.0.2.0/241018buildbot # [ 16.111312] dhcpcd[571]: eth0: adding default route via 10.0.2.21019buildbot # [ 16.242666] systemd[1]: Started DHCP Client.1020buildbot # [ 23.651107] buildbot-master-pre-start[736]: updating existing installation1021buildbot # [ 23.652138] buildbot-master-pre-start[736]: not touching existing buildbot.tac1022buildbot # [ 23.653200] buildbot-master-pre-start[736]: creating buildbot.tac.new instead1023buildbot # [ 23.655092] buildbot-master-pre-start[736]: creating /var/lib/buildbot/master/master.cfg.sample1024buildbot # [ 23.656144] buildbot-master-pre-start[736]: creating database (postgresql://@/buildbot)1025buildbot # [ 23.657112] buildbot-master-pre-start[736]: buildmaster configured in /var/lib/buildbot/master1026buildbot # [ 23.871581] systemd[1]: Started Buildbot Continuous Integration Server..1027buildbot # [ 23.876679] systemd[1]: Started Buildbot Worker..1028buildbot # [ 23.878083] systemd[1]: Reached target Multi-User System.1029buildbot # [ 23.879314] systemd[1]: Startup finished in 792ms (kernel) + 3.804s (initrd) + 19.282s (userspace) = 23.879s.1030buildbot: (finished: waiting for unit multi-user.target, in 13.40 seconds)1031subtest: Master and worker services start1032buildbot: waiting for unit buildbot-master.service1033buildbot: (finished: waiting for unit buildbot-master.service, in 0.09 seconds)1034buildbot: waiting for unit buildbot-worker.service1035buildbot: (finished: waiting for unit buildbot-worker.service, in 0.09 seconds)1036buildbot: waiting for TCP port 8010 on localhost1037buildbot # [ 25.803487] twistd[860]: Starting worker local-worker-0001038buildbot # [ 25.804538] twistd[860]: 2026-07-19T05:18:57+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py...1039buildbot # [ 25.806384] twistd[860]: 2026-07-19T05:18:58+0000 [-] Loaded.1040buildbot # [ 25.807501] twistd[860]: 2026-07-19T05:18:58+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13 3.13.13) starting up.1041buildbot # [ 25.810083] twistd[860]: 2026-07-19T05:18:58+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1042buildbot # [ 25.811690] twistd[860]: 2026-07-19T05:18:58+0000 [-] Starting Worker -- version: 2026.06.261043buildbot # [ 25.812962] twistd[860]: 2026-07-19T05:18:58+0000 [-] recording hostname in twistd.hostname1044buildbot # [ 25.814413] twistd[860]: 2026-07-19T05:18:58+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x7b0ac1640590>1045buildbot # [ 25.826237] twistd[860]: 2026-07-19T05:18:58+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x7b0ac1640ad0> in 2.2160092503040802 seconds.1046buildbot # [ 25.828598] twistd[860]: 2026-07-19T05:18:58+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x7b0ac1640590>1047buildbot # [ 28.045311] twistd[860]: 2026-07-19T05:19:00+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x7b0ac1640590>1048buildbot # [ 28.049823] twistd[860]: 2026-07-19T05:19:00+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x7b0ac1640ad0> in 2.5664233436641877 seconds.1049buildbot # [ 28.052438] twistd[860]: 2026-07-19T05:19:00+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x7b0ac1640590>1050buildbot # [ 28.510219] twistd[859]: 2026-07-19T05:18:57+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac...1051buildbot # [ 28.511950] twistd[859]: 2026-07-19T05:19:01+0000 [-] Loaded.1052buildbot # [ 28.512716] twistd[859]: 2026-07-19T05:19:01+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13 3.13.13) starting up.1053buildbot # [ 28.514763] twistd[859]: 2026-07-19T05:19:01+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1054buildbot # [ 28.516372] twistd[859]: 2026-07-19T05:19:01+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.01055buildbot # [ 28.530438] twistd[859]: 2026-07-19T05:19:01+0000 [-] Loading configuration from '/nix/store/72g2zhxq0qrzvns9a96sl6fq1ym0xj57-master.cfg'1056buildbot # [ 29.779468] twistd[859]: 2026-07-19T05:19:02+0000 [-] Setting up database with URL 'postgresql://@/buildbot'1057buildbot # [ 29.896785] twistd[859]: 2026-07-19T05:19:02+0000 [-] adding 9 new builders, removing 01058buildbot # [ 29.991026] twistd[859]: 2026-07-19T05:19:02+0000 [-] adding 3 new services, removing 01059buildbot # [ 30.131069] twistd[859]: 2026-07-19T05:19:02+0000 [-] adding 1 new change_sources, removing 01060buildbot # [ 30.135649] twistd[859]: 2026-07-19T05:19:02+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'1061buildbot # [ 30.143698] twistd[859]: 2026-07-19T05:19:02+0000 [-] adding 14 new schedulers, removing 01062buildbot # [ 30.290265] twistd[859]: 2026-07-19T05:19:02+0000 [-] BuildbotSite starting on 80101063buildbot # [ 30.293066] twistd[859]: 2026-07-19T05:19:02+0000 [buildbot.www.service.BuildbotSite#info] Starting factory <buildbot.www.service.BuildbotSite object at 0x73668b7c0ad0>1064buildbot # [ 30.295027] twistd[859]: 2026-07-19T05:19:02+0000 [-] adding 5 new workers, removing 01065buildbot # [ 30.307508] twistd[859]: 2026-07-19T05:19:02+0000 [-] PBServerFactory starting on 99891066buildbot # [ 30.308950] twistd[859]: 2026-07-19T05:19:02+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory <twisted.spread.pb.PBServerFactory object at 0x73668b7c1550>1067buildbot # [ 30.335973] twistd[859]: 2026-07-19T05:19:02+0000 [-] Starting Worker -- version: 2026.06.261068buildbot # [ 30.337119] twistd[859]: 2026-07-19T05:19:02+0000 [-] recording hostname in twistd.hostname1069buildbot # [ 30.338091] twistd[859]: 2026-07-19T05:19:02+0000 [-] message from master: attached1070buildbot # [ 30.340640] twistd[859]: 2026-07-19T05:19:03+0000 [-] Got workerinfo from '__Janitor'1071buildbot # [ 30.350347] twistd[859]: 2026-07-19T05:19:03+0000 [-] bot attached1072buildbot # [ 30.351194] twistd[859]: 2026-07-19T05:19:03+0000 [-] Worker __Janitor attached to __Janitor1073buildbot # [ 30.352203] twistd[859]: 2026-07-19T05:19:03+0000 [-] message from master: attached1074buildbot # [ 30.392159] twistd[859]: 2026-07-19T05:19:03+0000 [-] BuildMaster is running1075buildbot # [ 30.451216] sshd-session[928]: Accepted publickey for root from ::1 port 56812 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81076buildbot # [ 30.465806] sshd-session[928]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1077buildbot # [ 30.509965] systemd-logind[439]: New session '1' of user 'root' with class 'user' and type 'tty'.1078buildbot # [ 30.514826] systemd[1]: Created slice Slice /user/0.1079buildbot # [ 30.519128] systemd[1]: Starting User Runtime Directory /run/user/0...1080buildbot # [ 30.568416] systemd[1]: Finished User Runtime Directory /run/user/0.1081buildbot # [ 30.574847] systemd[1]: Starting User Manager for UID 0...1082buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded!1083buildbot: (finished: waiting for TCP port 8010 on localhost, in 6.42 seconds)1084buildbot: waiting for success: curl --fail --head http://localhost:80101085buildbot # [ 30.621233] twistd[860]: 2026-07-19T05:19:03+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x7b0ac1640590>1086buildbot # [ 30.631168] twistd[859]: 2026-07-19T05:19:03+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=54008)1087buildbot # [ 30.634180] twistd[860]: 2026-07-19T05:19:03+0000 [Broker,client] message from master: attached1088buildbot # [ 30.642890] twistd[859]: 2026-07-19T05:19:03+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000'1089buildbot # [ 30.647477] (systemd)[938]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0)1090buildbot # [ 30.655146] systemd-logind[439]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'.1091buildbot # [ 30.660289] twistd[859]: 2026-07-19T05:19:03+0000 [-] bot attached1092buildbot # [ 30.665451] twistd[859]: 2026-07-19T05:19:03+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval1093buildbot # [ 30.667443] twistd[859]: 2026-07-19T05:19:03+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect1094buildbot # [ 30.669343] twistd[859]: 2026-07-19T05:19:03+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build1095buildbot # [ 30.671145] twistd[859]: 2026-07-19T05:19:03+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect1096buildbot # [ 30.673104] twistd[859]: 2026-07-19T05:19:03+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure1097buildbot # [ 30.674588] twistd[859]: 2026-07-19T05:19:03+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot1098buildbot # [ 30.676561] twistd[859]: 2026-07-19T05:19:03+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed1099buildbot # [ 30.678290] twistd[859]: 2026-07-19T05:19:03+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval1100buildbot # [ 30.680949] twistd[860]: 2026-07-19T05:19:03+0000 [Broker,client] message from master: attached1101buildbot # [ 30.683138] twistd[860]: 2026-07-19T05:19:03+0000 [Broker,client] message from master: attached1102buildbot # [ 30.684263] twistd[860]: 2026-07-19T05:19:03+0000 [Broker,client] message from master: attached1103buildbot # [ 30.685794] twistd[860]: 2026-07-19T05:19:03+0000 [Broker,client] message from master: attached1104buildbot # [ 30.687117] twistd[860]: 2026-07-19T05:19:03+0000 [Broker,client] message from master: attached1105buildbot # [ 30.689069] twistd[860]: 2026-07-19T05:19:03+0000 [Broker,client] message from master: attached1106buildbot # [ 30.691099] twistd[860]: 2026-07-19T05:19:03+0000 [Broker,client] message from master: attached1107buildbot # [ 30.692377] twistd[860]: 2026-07-19T05:19:03+0000 [Broker,client] message from master: attached1108buildbot # [ 30.715452] twistd[860]: 2026-07-19T05:19:03+0000 [Broker,client] Connected to buildmaster; worker is ready1109buildbot # [ 30.717240] twistd[860]: 2026-07-19T05:19:03+0000 [Broker,client] sending application-level keepalives every 600 seconds1110buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1111buildbot # Dload Upload Total Spent Left Speed1112buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01113buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.36 seconds)1114(finished: subtest: Master and worker services start, in 6.96 seconds)1115subtest: Project is registered1116buildbot: waiting for success: curl http://localhost:8010/api/v2/projects1117buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1118buildbot # Dload Upload Total Spent Left Speed1119buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 9642 0 0100 266 100 266 0 0 7754 0 0100 266 100 266 0 0 6521 0 01120buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.12 seconds)1121(finished: subtest: Project is registered, in 0.12 seconds)1122subtest: CLI list-schedules works1123buildbot: must succeed: 1124 cd /tmp/test-flake1125 buildbot-effects list-schedules1126 1127buildbot # [ 31.178733] systemd[938]: Queued start job for default target Main User Target.1128buildbot # [ 31.184274] systemd[938]: Created slice User Application Slice.1129buildbot # [ 31.186025] systemd[938]: Started Daily Cleanup of User's Temporary Directories.1130buildbot # [ 31.187146] systemd[938]: Reached target Paths.1131buildbot # [ 31.188846] systemd[938]: Reached target Timers.1132buildbot # [ 31.190597] systemd[938]: Starting D-Bus User Message Bus Socket...1133buildbot # [ 31.194212] systemd[938]: Starting Create User Files and Directories...1134buildbot # [ 31.238571] systemd[938]: Finished Create User Files and Directories.1135buildbot # [ 31.293507] systemd[938]: Listening on D-Bus User Message Bus Socket.1136buildbot # [ 31.294775] systemd[938]: Reached target Sockets.1137buildbot # [ 31.296179] systemd[938]: Reached target Basic System.1138buildbot # [ 31.296851] systemd[938]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system1139buildbot # [ 31.300326] systemd[938]: Reached target Main User Target.1140buildbot # [ 31.301553] systemd[938]: Startup finished in 586ms.1141buildbot # [ 31.303142] systemd[1]: Started User Manager for UID 0.1142buildbot # [ 31.303827] systemd[1]: Started Session 1 of User root.1143buildbot # [ 31.353543] sshd-session[967]: Received disconnect from ::1 port 56812:11: disconnected by user1144buildbot # [ 31.354822] sshd-session[967]: Disconnected from user root ::1 port 568121145buildbot # [ 31.356037] sshd-session[928]: pam_unix(sshd:session): session closed for user root1146buildbot # [ 31.365820] systemd[1]: session-1.scope: Deactivated successfully.1147buildbot # [ 31.367880] systemd-logind[439]: Session 1 logged out. Waiting for processes to exit.1148buildbot # [ 31.372669] systemd-logind[439]: Removed session 1.1149buildbot # [ 31.567204] sshd-session[977]: Accepted publickey for root from ::1 port 56828 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81150buildbot # [ 31.581493] sshd-session[977]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1151buildbot # [ 31.590036] systemd-logind[439]: New session '3' of user 'root' with class 'user' and type 'tty'.1152buildbot # [ 31.595771] systemd[1]: Started Session 3 of User root.1153buildbot # [ 31.662959] sshd-session[983]: Received disconnect from ::1 port 56828:11: disconnected by user1154buildbot # [ 31.664491] sshd-session[983]: Disconnected from user root ::1 port 568281155buildbot # [ 31.666112] sshd-session[977]: pam_unix(sshd:session): session closed for user root1156buildbot # [ 31.673329] systemd[1]: session-3.scope: Deactivated successfully.1157buildbot # [ 31.677296] systemd-logind[439]: Session 3 logged out. Waiting for processes to exit.1158buildbot # [ 31.680150] systemd-logind[439]: Removed session 3.1159buildbot # [ 31.706071] twistd[859]: 2026-07-19T05:19:04+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1160buildbot: (finished: must succeed: 1161 cd /tmp/test-flake1162 buildbot-effects list-schedules1163 , in 0.64 seconds)1164(finished: subtest: CLI list-schedules works, in 0.64 seconds)1165subtest: Push a new commit to trigger build1166buildbot: must succeed: 1167 cd /tmp/test-flake1168 echo "# trigger rebuild" >> flake.nix1169 git add flake.nix1170 git commit -m "Trigger build"1171 git push origin master1172 1173buildbot # Enumerating objects: 5, done.1174buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.1175buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done.1176buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 296 bytes | 296.00 KiB/s, done.1177buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0)1178buildbot # To /srv/repos/test-flake.git1179buildbot # 1277a93..06212c2 master -> master1180buildbot: (finished: must succeed: 1181 cd /tmp/test-flake1182 echo "# trigger rebuild" >> flake.nix1183 git add flake.nix1184 git commit -m "Trigger build"1185 git push origin master1186 , in 0.12 seconds)1187(finished: subtest: Push a new commit to trigger build, in 0.12 seconds)1188subtest: Wait for nix-eval build to complete1189buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1190buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1191buildbot # Dload Upload Total Spent Left Speed1192buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2444 0 0100 51 100 51 0 0 1990 0 0100 51 100 51 0 0 1696 0 01193buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)1194buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1195buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1196buildbot # Dload Upload Total Spent Left Speed1197buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1882 0 0100 51 100 51 0 0 1602 0 0100 51 100 51 0 0 1405 0 01198buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1199buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1200buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1201buildbot # Dload Upload Total Spent Left Speed1202buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1909 0 0100 51 100 51 0 0 1634 0 0100 51 100 51 0 0 1432 0 01203buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1204buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1205buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1206buildbot # Dload Upload Total Spent Left Speed1207buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1749 0 0100 51 100 51 0 0 1511 0 0100 51 100 51 0 0 1334 0 01208buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1209buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1210buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1211buildbot # Dload Upload Total Spent Left Speed1212buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1950 0 0100 51 100 51 0 0 1653 0 0100 51 100 51 0 0 1445 0 01213buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1214buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1215buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1216buildbot # Dload Upload Total Spent Left Speed1217buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1881 0 0100 51 100 51 0 0 1601 0 0100 51 100 51 0 0 1401 0 01218buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1219buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1220buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1221buildbot # Dload Upload Total Spent Left Speed1222buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2012 0 0100 51 100 51 0 0 1708 0 0100 51 100 51 0 0 1482 0 01223buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1224buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1225buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1226buildbot # Dload Upload Total Spent Left Speed1227buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2026 0 0100 51 100 51 0 0 1719 0 0100 51 100 51 0 0 1493 0 01228buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1229buildbot # [ 40.390845] sshd-session[1044]: Accepted publickey for root from ::1 port 38218 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81230buildbot # [ 40.411862] sshd-session[1044]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1231buildbot # [ 40.426467] systemd-logind[439]: New session '4' of user 'root' with class 'user' and type 'tty'.1232buildbot # [ 40.430401] systemd[1]: Started Session 4 of User root.1233buildbot # [ 40.469477] sshd-session[1047]: Received disconnect from ::1 port 38218:11: disconnected by user1234buildbot # [ 40.470829] sshd-session[1047]: Disconnected from user root ::1 port 382181235buildbot # [ 40.472251] sshd-session[1044]: pam_unix(sshd:session): session closed for user root1236buildbot # [ 40.482370] systemd[1]: session-4.scope: Deactivated successfully.1237buildbot # [ 40.487772] systemd-logind[439]: Session 4 logged out. Waiting for processes to exit.1238buildbot # [ 40.489672] systemd-logind[439]: Removed session 4.1239buildbot # [ 40.682921] sshd-session[1052]: Accepted publickey for root from ::1 port 38226 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81240buildbot # [ 40.703353] sshd-session[1052]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1241buildbot # [ 40.717073] systemd-logind[439]: New session '5' of user 'root' with class 'user' and type 'tty'.1242buildbot # [ 40.720425] systemd[1]: Started Session 5 of User root.1243buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1244buildbot # [ 40.772261] sshd-session[1055]: Received disconnect from ::1 port 38226:11: disconnected by user1245buildbot # [ 40.773806] sshd-session[1055]: Disconnected from user root ::1 port 382261246buildbot # [ 40.774764] sshd-session[1052]: pam_unix(sshd:session): session closed for user root1247buildbot # [ 40.780553] systemd[1]: session-5.scope: Deactivated successfully.1248buildbot # [ 40.784634] systemd-logind[439]: Session 5 logged out. Waiting for processes to exit.1249buildbot # [ 40.786922] systemd-logind[439]: Removed session 5.1250buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1251buildbot # Dload Upload Total Spent[ 40.815372] twistd[859]: 2026-07-19T05:19:13+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1252buildbot # Left Speed1253buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1398 0 0100 51 100 51 0 0 1180 0 0100 51 100 51 0 0 1005 0 01254buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds)1255buildbot # [ 40.872634] twistd[859]: 2026-07-19T05:19:13+0000 [-] gitpoller: processing 1 changes: ['06212c242d74ac55f85a7b74416ee89e8308cb67'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master"1256buildbot # [ 40.946956] twistd[859]: 2026-07-19T05:19:13+0000 [-] added change with revision 06212c242d74ac55f85a7b74416ee89e8308cb67 to database1257buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1258buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1259buildbot # Dload Upload Total Spent Left Speed1260buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1325 0 0100 51 100 51 0 0 1152 0 0100 51 100 51 0 0 1023 0 01261buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds)1262buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1263buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1264buildbot # Dload Upload Total Spent Left Speed1265buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2037 0 0100 51 100 51 0 0 1715 0 0100 51 100 51 0 0 1488 0 01266buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1267buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1268buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1269buildbot # Dload Upload Total Spent Left Speed1270buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2075 0 0100 51 100 51 0 0 1742 0 0100 51 100 51 0 0 1513 0 01271buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1272buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1273buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1274buildbot # Dload Upload Total Spent Left Speed1275buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1966 0 0100 51 100 51 0 0 1663 0 0100 51 100 51 0 0 1452 0 01276buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1277buildbot # [ 45.989988] twistd[859]: 2026-07-19T05:19:18+0000 [-] added buildset 1 to database1278buildbot # [ 46.136225] twistd[859]: 2026-07-19T05:19:18+0000 [-] starting build <Build test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>1279buildbot # [ 46.142280] twistd[859]: 2026-07-19T05:19:18+0000 [-] <Build test-flake/nix-eval number:None results:success>.startBuild1280buildbot # [ 46.213626] twistd[859]: 2026-07-19T05:19:18+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1281buildbot # [ 46.217153] twistd[859]: 2026-07-19T05:19:18+0000 [-] starting build <Build test-flake/nix-eval number:1 results:success>.. pinging the worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=BUILDING>1282buildbot # [ 46.219528] twistd[859]: 2026-07-19T05:19:18+0000 [-] sending ping1283buildbot # [ 46.221888] twistd[860]: 2026-07-19T05:19:18+0000 [Broker,client] message from master: ping1284buildbot # [ 46.222967] twistd[859]: 2026-07-19T05:19:18+0000 [Broker,0,127.0.0.1] ping finished: success1285buildbot # [ 46.243473] twistd[859]: 2026-07-19T05:19:18+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [0]1286buildbot # [ 46.244855] twistd[859]: 2026-07-19T05:19:18+0000 [-] command '['git', '--version']' in dir 'build'1287buildbot # [ 46.246519] twistd[860]: 2026-07-19T05:19:18+0000 [Broker,client] (command 0): startCommand:shell1288buildbot # [ 46.248699] twistd[860]: 2026-07-19T05:19:18+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand1289buildbot # [ 46.251052] twistd[860]: 2026-07-19T05:19:18+0000 [Broker,client] (command ['git', '--version']): git --version1290buildbot # [ 46.252465] twistd[860]: 2026-07-19T05:19:18+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1291buildbot # [ 46.254439] twistd[860]: 2026-07-19T05:19:18+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}1292buildbot # [ 46.255840] twistd[860]: 2026-07-19T05:19:18+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']1293buildbot # [ 46.257298] twistd[860]: 2026-07-19T05:19:18+0000 [Broker,client] (command ['git', '--version']): using PTY: False1294buildbot # [ 46.274947] twistd[860]: 2026-07-19T05:19:18+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0161141295buildbot # [ 46.276822] twistd[860]: 2026-07-19T05:19:18+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7b0ac1642ba0>1296buildbot # [ 46.306481] twistd[859]: 2026-07-19T05:19:18+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=01297buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1298buildbot # [ 46.351166] twistd[859]: 2026-07-19T05:19:19+0000 [-] <RemoteCommand 'stat' at 126884359154256>: RemoteCommand.run [1]1299buildbot # [ 46.355068] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command 1): startCommand:stat1300buildbot # [ 46.356182] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched'1301buildbot # [ 46.359275] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x7b0ac1641400>1302buildbot # [ 46.362070] twistd[859]: 2026-07-19T05:19:19+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 126884359154256> rc=21303buildbot # [ 46.376762] twistd[859]: 2026-07-19T05:19:19+0000 [-] <RemoteCommand 'mkdir' at 126884263858640>: RemoteCommand.run [2]1304buildbot # [ 46.406988] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command 2): startCommand:mkdir1305buildbot # [ 46.408211] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.MakeDirectory object at 0x7b0ac1641160>1306buildbot # [ 46.410804] twistd[859]: 2026-07-19T05:19:19+0000 [Broker,0,127.0.0.1] <RemoteCommand 'mkdir' at 126884263858640> rc=01307buildbot # % Total % Received % Xferd Average Spee[ 46.422512] twistd[859]: 2026-07-19T05:19:19+0000 [-] <RemoteCommand 'downloadFile' at 126884211931280>: RemoteCommand.run [3]1308buildbot # d Time Time Time Current1309buildbot # Dload Upload Total Spent Left Speed1310buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 18944 0 0100 401 100 401 0 0 15491 0 0100 401 100 401 0 0 13222 0 01311buildbot # [ 46.454460] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command 3): startCommand:downloadFile1312buildbot # [ 46.458156] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.transfer.WorkerFileDownloadCommand object at 0x7b0ac16401a0>1313buildbot # [ 46.461086] twistd[859]: 2026-07-19T05:19:19+0000 [Broker,0,127.0.0.1] <RemoteCommand 'downloadFile' at 126884211931280> rc=01314buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1315buildbot # [ 46.468457] twistd[859]: 2026-07-19T05:19:19+0000 [-] <RemoteCommand 'listdir' at 126884211931600>: RemoteCommand.run [4]1316buildbot # [ 46.503693] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command 4): startCommand:listdir1317buildbot # [ 46.505129] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0x7b0ac16412b0>1318buildbot # [ 46.508514] twistd[859]: 2026-07-19T05:19:19+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 126884211931600> rc=01319buildbot # [ 46.514570] twistd[859]: 2026-07-19T05:19:19+0000 [-] No git repo present, making full clone1320buildbot # [ 46.516627] twistd[859]: 2026-07-19T05:19:19+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'>: RemoteCommand.run [5]1321buildbot # [ 46.519873] twistd[859]: 2026-07-19T05:19:19+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build'1322buildbot # [ 46.549934] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command 5): startCommand:shell1323buildbot # [ 46.553136] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand1324buildbot # [ 46.556376] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress1325buildbot # [ 46.573653] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1326buildbot # [ 46.577480] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {}1327buildbot # [ 46.580992] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress']1328buildbot # [ 46.586506] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False1329buildbot # [ 46.800319] sshd-session[1093]: Accepted publickey for root from ::1 port 58350 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81330buildbot # [ 46.819517] sshd-session[1093]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1331buildbot # [ 46.832504] systemd-logind[439]: New session '6' of user 'root' with class 'user' and type 'tty'.1332buildbot # [ 46.839241] systemd[1]: Started Session 6 of User root.1333buildbot # [ 46.895711] sshd-session[1096]: Received disconnect from ::1 port 58350:11: disconnected by user1334buildbot # [ 46.898747] sshd-session[1096]: Disconnected from user root ::1 port 583501335buildbot # [ 46.900103] sshd-session[1093]: pam_unix(sshd:session): session closed for user root1336buildbot # [ 46.905881] systemd[1]: session-6.scope: Deactivated successfully.1337buildbot # [ 46.909459] systemd-logind[439]: Session 6 logged out. Waiting for processes to exit.1338buildbot # [ 46.912244] systemd-logind[439]: Removed session 6.1339buildbot # [ 46.929075] twistd[860]: 2026-07-19T05:19:19+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.3765021340buildbot # [ 46.932745] twistd[860]: 2026-07-19T05:19:19+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7b0ac1659090>1341buildbot # [ 46.937816] twistd[859]: 2026-07-19T05:19:19+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'> rc=01342buildbot # [ 46.960889] twistd[859]: 2026-07-19T05:19:19+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '06212c242d74ac55f85a7b74416ee89e8308cb67']'>: RemoteCommand.run [6]1343buildbot # [ 46.964356] twistd[859]: 2026-07-19T05:19:19+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '06212c242d74ac55f85a7b74416ee89e8308cb67']' in dir 'build'1344buildbot # [ 46.978889] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command 6): startCommand:shell1345buildbot # [ 46.980347] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '06212c242d74ac55f85a7b74416ee89e8308cb67']): RunProcess._startCommand1346buildbot # [ 46.983478] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '06212c242d74ac55f85a7b74416ee89e8308cb67']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f 06212c242d74ac55f85a7b74416ee89e8308cb671347buildbot # [ 46.987905] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '06212c242d74ac55f85a7b74416ee89e8308cb67']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1348buildbot # [ 46.991490] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '06212c242d74ac55f85a7b74416ee89e8308cb67']): watching logfiles {}1349buildbot # [ 46.996107] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '06212c242d74ac55f85a7b74416ee89e8308cb67']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'06212c242d74ac55f85a7b74416ee89e8308cb67']1350buildbot # [ 47.000605] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '06212c242d74ac55f85a7b74416ee89e8308cb67']): using PTY: False1351buildbot # [ 47.023444] twistd[860]: 2026-07-19T05:19:19+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '06212c242d74ac55f85a7b74416ee89e8308cb67']): command finished with signal None, exit code 0, elapsedTime: 0.0286771352buildbot # [ 47.026990] twistd[860]: 2026-07-19T05:19:19+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7b0ac1659450>1353buildbot # [ 47.046992] twistd[859]: 2026-07-19T05:19:19+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '06212c242d74ac55f85a7b74416ee89e8308cb67']'> rc=01354buildbot # [ 47.068908] twistd[859]: 2026-07-19T05:19:19+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [7]1355buildbot # [ 47.071863] twistd[859]: 2026-07-19T05:19:19+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build'1356buildbot # [ 47.091944] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command 7): startCommand:shell1357buildbot # [ 47.093405] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand1358buildbot # [ 47.096380] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive1359buildbot # [ 47.100558] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1360buildbot # [ 47.105975] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}1361buildbot # [ 47.108734] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive']1362buildbot # [ 47.113049] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False1363buildbot # [ 47.253523] twistd[860]: 2026-07-19T05:19:19+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.1484611364buildbot # [ 47.257218] twistd[860]: 2026-07-19T05:19:19+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7b0ac15fe520>1365buildbot # [ 47.260486] twistd[859]: 2026-07-19T05:19:19+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'> rc=01366buildbot # [ 47.278040] twistd[859]: 2026-07-19T05:19:19+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [8]1367buildbot # [ 47.279979] twistd[859]: 2026-07-19T05:19:19+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'1368buildbot # [ 47.305023] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command 8): startCommand:shell1369buildbot # [ 47.306474] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand1370buildbot # [ 47.307972] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD1371buildbot # [ 47.309411] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1372buildbot # [ 47.311432] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}1373buildbot # [ 47.314793] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']1374buildbot # [ 47.316290] twistd[860]: 2026-07-19T05:19:19+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False1375buildbot # [ 47.330101] twistd[860]: 2026-07-19T05:19:19+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0166701376buildbot # [ 47.331994] twistd[860]: 2026-07-19T05:19:19+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7b0ac15fe650>1377buildbot # [ 47.362677] twistd[859]: 2026-07-19T05:19:20+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=01378buildbot # [ 47.383677] twistd[859]: 2026-07-19T05:19:20+0000 [-] Got Git revision 06212c242d74ac55f85a7b74416ee89e8308cb671379buildbot # [ 47.384944] twistd[859]: 2026-07-19T05:19:20+0000 [-] <RemoteCommand 'rmdir' at 126884212539472>: RemoteCommand.run [9]1380buildbot # [ 47.406071] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command 9): startCommand:rmdir1381buildbot # [ 47.407211] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand1382buildbot # [ 47.409246] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot1383buildbot # [ 47.411790] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs)1384buildbot # [ 47.414153] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {}1385buildbot # [ 47.417928] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']1386buildbot # [ 47.420434] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False1387buildbot # [ 47.437119] twistd[860]: 2026-07-19T05:19:20+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.0206161388buildbot # [ 47.439634] twistd[860]: 2026-07-19T05:19:20+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.RemoveDirectory object at 0x7b0ac16430e0>1389buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1390buildbot # [ 47.467581] twistd[859]: 2026-07-19T05:19:20+0000 [Broker,0,127.0.0.1] <RemoteCommand 'rmdir' at 126884212539472> rc=01391buildbot # [ 47.493248] twistd[859]: 2026-07-19T05:19:20+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): []1392buildbot # [ 47.514498] twistd[859]: 2026-07-19T05:19:20+0000 [-] step 'git' complete: success (None)1393buildbot # [ 47.522918] twistd[859]: 2026-07-19T05:19:20+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x736691400d70>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x7366914012b0>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x736691402660>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x736691402660>)])1394buildbot # [ 47.539236] twistd[859]: 2026-07-19T05:19:20+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [10]1395buildbot # [ 47.541337] twistd[859]: 2026-07-19T05:19:20+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'1396buildbot # [ 47.543842] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command 10): startCommand:shell1397buildbot # [ 47.546310] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand1398buildbot # [ 47.548484] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'1399buildbot # [ 47.554060] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1400buildbot # [ 47.556425] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}1401buildbot # [ 47.558155] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']1402buildbot # [ 47.560417] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False1403buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1404buildbot # Dload Upload Total Spent Left Speed1405buildbot # 0 0 0 0 0 0 0 0 0[ 47.596574] twistd[860]: 2026-07-19T05:19:20+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0433411406buildbot # [ 47.599252] twistd[860]: 2026-07-19T05:19:20+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7b0ac1c23e30>1407buildbot # 100 401 100 401 0 0 12927 0 0100 401 100 [ 47.608611] twistd[859]: 2026-07-19T05:19:20+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=01408buildbot # 401 0 0 11104 0 [ 47.617323] twistd[859]: 2026-07-19T05:19:20+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [11]1409buildbot # [ 47.621237] twistd[859]: 2026-07-19T05:19:20+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'1410buildbot # 0100 401 100 401 0 0 7364 0 01411buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.17 seconds)1412buildbot # [ 47.657177] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command 11): startCommand:shell1413buildbot # [ 47.658707] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand1414buildbot # [ 47.662785] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'1415buildbot # [ 47.668862] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1416buildbot # [ 47.673485] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}1417buildbot # [ 47.677474] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']1418buildbot # [ 47.686060] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False1419buildbot # [ 47.836971] systemd[1]: Started Nix Daemon.1420buildbot # [ 47.964392] nix-daemon[1141]: accepted connection from pid 1140, user buildbot-worker1421buildbot # [ 47.998680] twistd[860]: 2026-07-19T05:19:20+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 0.3140221422buildbot # [ 48.003379] twistd[860]: 2026-07-19T05:19:20+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7b0ac1660af0>1423buildbot # [ 48.007833] twistd[859]: 2026-07-19T05:19:20+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=01424buildbot # [ 48.033922] twistd[859]: 2026-07-19T05:19:20+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x736691400d70>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x7366914012b0>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x736691402660>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x736691402660>)]1425buildbot # [ 48.045428] twistd[859]: 2026-07-19T05:19:20+0000 [-] step 'Evaluate flake' complete: success (None)1426buildbot # [ 48.068381] twistd[859]: 2026-07-19T05:19:20+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x736691400d70>, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []1427buildbot # [ 48.077917] twistd[859]: 2026-07-19T05:19:20+0000 [-] step 'build flake' complete: success (None)1428buildbot # [ 48.089648] twistd[859]: 2026-07-19T05:19:20+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x736691400d70>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x73669125cae0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x73669125cb80>)): []1429buildbot # [ 48.159230] twistd[859]: 2026-07-19T05:19:20+0000 [-] step 'Process skipped builds' complete: skipped (None)1430buildbot # [ 48.172687] twistd[859]: 2026-07-19T05:19:20+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [12]1431buildbot # [ 48.174700] twistd[859]: 2026-07-19T05:19:20+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build'1432buildbot # [ 48.177652] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command 12): startCommand:shell1433buildbot # [ 48.179364] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand1434buildbot # [ 48.181548] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/1435buildbot # [ 48.184309] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1436buildbot # [ 48.187027] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {}1437buildbot # [ 48.189093] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']1438buildbot # [ 48.193796] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False1439buildbot # [ 48.208238] twistd[860]: 2026-07-19T05:19:20+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0159861440buildbot # [ 48.210731] twistd[860]: 2026-07-19T05:19:20+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7b0ac1660f30>1441buildbot # [ 48.240474] twistd[859]: 2026-07-19T05:19:20+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'> rc=01442buildbot # [ 48.262770] twistd[859]: 2026-07-19T05:19:20+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []1443buildbot # [ 48.270378] twistd[859]: 2026-07-19T05:19:20+0000 [-] step 'Cleanup drv paths' complete: success (None)1444buildbot # [ 48.281404] twistd[859]: 2026-07-19T05:19:20+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [13]1445buildbot # [ 48.283822] twistd[859]: 2026-07-19T05:19:20+0000 [-] command '['buildbot-effects', 'list', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1446buildbot # [ 48.287936] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command 13): startCommand:shell1447buildbot # [ 48.289447] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1448buildbot # [ 48.291892] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev 06212c242d74ac55f85a7b74416ee89e8308cb67 --branch master --repo test-flake1449buildbot # [ 48.294922] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1450buildbot # [ 48.297901] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1451buildbot # [ 48.300302] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'06212c242d74ac55f85a7b74416ee89e8308cb67', b'--branch', b'master', b'--repo', b'test-flake']1452buildbot # [ 48.303689] twistd[860]: 2026-07-19T05:19:20+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1453buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1454buildbot # [ 48.687106] nix-daemon[1141]: accepted connection from pid 1150, user buildbot-worker1455buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1456buildbot # Dload Upload Total Spent Left Speed1457buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 12905 0 0100 401[ 48.745131] twistd[860]: 2026-07-19T05:19:21+0000 [-] (command ['buildbot-effects', 'list', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.4368501458buildbot # [ 48.747802] twistd[860]: 2026-07-19T05:19:21+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7b0ac1670550>1459buildbot # 100 [ 48.751421] twistd[859]: 2026-07-19T05:19:21+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']'> rc=01460buildbot # 401 0 0 10402 0 0100 401 100 401 0 0 7510 0 01461buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.14 seconds)1462buildbot # [ 48.791948] twistd[859]: 2026-07-19T05:19:21+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x736691400d70>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x73669125d300>, logEnviron=False)): []1463buildbot # [ 48.802042] twistd[859]: 2026-07-19T05:19:21+0000 [-] step 'Evaluate effects' complete: success (None)1464buildbot # [ 48.814419] twistd[859]: 2026-07-19T05:19:21+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x736691400d70>, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): []1465buildbot # [ 48.820865] twistd[859]: 2026-07-19T05:19:21+0000 [-] step 'Buildbot effect' complete: success (None)1466buildbot # [ 48.831524] twistd[859]: 2026-07-19T05:19:21+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [14]1467buildbot # [ 48.834795] twistd[859]: 2026-07-19T05:19:21+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1468buildbot # [ 48.838101] twistd[860]: 2026-07-19T05:19:21+0000 [Broker,client] (command 14): startCommand:shell1469buildbot # [ 48.839515] twistd[860]: 2026-07-19T05:19:21+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1470buildbot # [ 48.842031] twistd[860]: 2026-07-19T05:19:21+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev 06212c242d74ac55f85a7b74416ee89e8308cb67 --branch master --repo test-flake1471buildbot # [ 48.845370] twistd[860]: 2026-07-19T05:19:21+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1472buildbot # [ 48.848398] twistd[860]: 2026-07-19T05:19:21+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1473buildbot # [ 48.850789] twistd[860]: 2026-07-19T05:19:21+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'06212c242d74ac55f85a7b74416ee89e8308cb67', b'--branch', b'master', b'--repo', b'test-flake']1474buildbot # [ 48.856105] twistd[860]: 2026-07-19T05:19:21+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1475buildbot # [ 49.207224] nix-daemon[1141]: accepted connection from pid 1162, user buildbot-worker1476buildbot # [ 49.237241] twistd[860]: 2026-07-19T05:19:21+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.3823941477buildbot # [ 49.240298] twistd[860]: 2026-07-19T05:19:21+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7b0ac1670850>1478buildbot # [ 49.244782] twistd[859]: 2026-07-19T05:19:21+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', '06212c242d74ac55f85a7b74416ee89e8308cb67', '--branch', 'master', '--repo', 'test-flake']'> rc=01479buildbot # [ 49.281592] twistd[859]: 2026-07-19T05:19:21+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x736691400d70>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x73669125d4e0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x73669125d580>, logEnviron=False)): []1480buildbot # [ 49.292482] twistd[859]: 2026-07-19T05:19:21+0000 [-] step 'Evaluate scheduled effects' complete: success (None)1481buildbot # [ 49.293762] twistd[859]: 2026-07-19T05:19:21+0000 [-] <Build test-flake/nix-eval number:1 results:success>: build finished1482buildbot # [ 49.303876] twistd[859]: 2026-07-19T05:19:21+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1483buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1484buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1485buildbot # Dload Upload Total Spent Left Speed1486buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 15986 0 0100 411 100 411 0 0 13571 0 0100 411 100 411 0 0 11812 0 01487buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1488(finished: subtest: Wait for nix-eval build to complete, in 18.04 seconds)1489subtest: Schedule cache is created1490buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1491buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds)1492buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1493buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds)1494(finished: subtest: Schedule cache is created, in 0.06 seconds)1495subtest: Nightly schedulers are created1496buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1497buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1498buildbot # Dload Upload Total Spent Left Speed1499buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 67455 0 0100 3793 100 3793 0 0 62158 0 0100 3793 100 3793 0 0 57835 0 01500buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.12 seconds)1501buildbot # [ 50.368248] sshd-session[1198]: Accepted publickey for root from ::1 port 58354 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81502buildbot # [ 50.388720] sshd-session[1198]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1503buildbot # [ 50.403456] systemd-logind[439]: New session '7' of user 'root' with class 'user' and type 'tty'.1504buildbot # [ 50.406879] systemd[1]: Started Session 7 of User root.1505buildbot # [ 50.448262] sshd-session[1201]: Received disconnect from ::1 port 58354:11: disconnected by user1506buildbot # [ 50.449533] sshd-session[1201]: Disconnected from user root ::1 port 583541507buildbot # [ 50.450809] sshd-session[1198]: pam_unix(sshd:session): session closed for user root1508buildbot # [ 50.464066] systemd[1]: session-7.scope: Deactivated successfully.1509buildbot # [ 50.466756] systemd-logind[439]: Session 7 logged out. Waiting for processes to exit.1510buildbot # [ 50.468399] systemd-logind[439]: Removed session 7.1511buildbot # [ 50.669316] sshd-session[1206]: Accepted publickey for root from ::1 port 58362 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81512buildbot # [ 50.689115] sshd-session[1206]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1513buildbot # [ 50.703127] systemd-logind[439]: New session '8' of user 'root' with class 'user' and type 'tty'.1514buildbot # [ 50.705357] systemd[1]: Started Session 8 of User root.1515buildbot # [ 50.755220] sshd-session[1209]: Received disconnect from ::1 port 58362:11: disconnected by user1516buildbot # [ 50.756506] sshd-session[1209]: Disconnected from user root ::1 port 583621517buildbot # [ 50.757699] sshd-session[1206]: pam_unix(sshd:session): session closed for user root1518buildbot # [ 50.764872] systemd[1]: session-8.scope: Deactivated successfully.1519buildbot # [ 50.767292] systemd-logind[439]: Session 8 logged out. Waiting for processes to exit.1520buildbot # [ 50.771825] systemd-logind[439]: Removed session 8.1521buildbot # [ 50.779258] twistd[859]: 2026-07-19T05:19:23+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1522buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1523buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1524buildbot # Dload Upload Total Spent Left Speed1525buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 48400 0 0100 3793 100 3793 0 0 45506 0 0100 3793 100 3793 0 0 43161 0 01526buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.17 seconds)1527buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1528buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1529buildbot # Dload Upload Total Spent Left Speed1530buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 51962 0 0100 3793 100 3793 0 0 48470 0 0100 3793 100 3793 0 0 45823 0 01531buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds)1532buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1533buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1534buildbot # Dload Upload Total Spent Left Speed1535buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 53652 0 0100 3793 100 3793 0 0 50143 0 0100 3793 100 3793 0 0 47298 0 01536buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds)1537buildbot # [ 54.278608] twistd[859]: 2026-07-19T05:19:26+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake1538buildbot # [ 54.283830] twistd[859]: 2026-07-19T05:19:26+0000 [-] beginning configuration update1539buildbot # [ 54.287725] twistd[859]: 2026-07-19T05:19:26+0000 [-] Loading configuration from '/nix/store/72g2zhxq0qrzvns9a96sl6fq1ym0xj57-master.cfg'1540buildbot # [ 54.328129] twistd[859]: 2026-07-19T05:19:26+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'1541buildbot # [ 54.334141] twistd[859]: 2026-07-19T05:19:26+0000 [-] adding 1 new schedulers, removing 01542buildbot # [ 54.441523] twistd[859]: 2026-07-19T05:19:27+0000 [-] configuration update complete (took 0.158 seconds)1543buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1544buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1545buildbot # Dload Upload Total Spent Left Speed1546buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 56345 0 0100 4079 100 4079 0 0 52831 0 0100 4079 100 4079 0 0 49887 0 01547buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds)1548buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1549buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1550buildbot # Dload Upload Total Spent Left Speed1551buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 57112 0 0100 4079 100 4079 0 0 53611 0 0100 4079 100 4079 0 0 50583 0 01552buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.14 seconds)1553(finished: subtest: Nightly schedulers are created, in 4.92 seconds)1554subtest: Scheduled effect builder exists1555buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders1556buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1557buildbot # Dload Upload Total Spent Left Speed1558buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 118.6k 0 0100 2371 100 2371 0 0 98516 0 0100 2371 100 2371 0 0 83009 0 01559buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.09 seconds)1560(finished: subtest: Scheduled effect builder exists, in 0.09 seconds)1561(finished: run the VM test script, in 55.88 seconds)1562test script finished in 55.94s1563cleanup1564kill QemuMachine (pid 12)1565buildbot # qemu-system-x86_64: terminating on signal 15 from pid 6 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13)1566(finished: cleanup, in 0.24 seconds)1567additionally exposed symbols:1568 buildbot,1569 vlan1,1570 start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh