tribuchet: building on jamie Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.00 seconds) Test will time out and terminate in 3600 seconds run the VM test script vm: waiting for unit multi-user.target vm: waiting for the VM to finish booting vm: starting vm vm: QEMU running (pid 12) vm # /build /build/vm-state-vm vm # /build/vm-state-vm vm # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) vm # vm # vm # iPXE (http://ipxe.org) 00:04.0 CA00 PCI2.10 PnP PMM+5CBD1CB0+5CB31CB0 CA00 vm # Press Ctrl-B to configure iPXE (PCI 00:04.0)... vm # vm # vm # Booting from Hard Disk... vm # [ 0.000000] Linux version 6.8.0-117-generic (buildd@lcy02-amd64-102) (x86_64-linux-gnu-gcc-13 (Ubuntu 13.3.0-6ubuntu2~24.04.1) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #117-Ubuntu SMP PREEMPT_DYNAMIC Tue May 5 19:26:24 UTC 2026 (Ubuntu 6.8.0-117.117-generic 6.8.12) vm # [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.8.0-117-generic root=LABEL=cloudimg-rootfs ro console=tty1 console=ttyS0 vm # [ 0.000000] KERNEL supported cpus: vm # [ 0.000000] Intel GenuineIntel vm # [ 0.000000] AMD AuthenticAMD vm # [ 0.000000] Hygon HygonGenuine vm # [ 0.000000] Centaur CentaurHauls vm # [ 0.000000] zhaoxin Shanghai vm # [ 0.000000] BIOS-provided physical RAM map: vm # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable vm # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved vm # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved vm # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005dbdffff] usable vm # [ 0.000000] BIOS-e820: [mem 0x000000005dbe0000-0x000000005dbfffff] reserved vm # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved vm # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved vm # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved vm # [ 0.000000] NX (Execute Disable) protection: active vm # [ 0.000000] APIC: Static calls initialized vm # [ 0.000000] SMBIOS 2.8 present. vm # [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 vm # [ 0.000000] Hypervisor detected: KVM vm # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 vm # [ 0.000000] kvm-clock: using sched offset of 19241174334 cycles vm # [ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm # [ 0.000004] tsc: Detected 2400.018 MHz processor vm # [ 0.000856] last_pfn = 0x5dbe0 max_arch_pfn = 0x10000000000 vm # [ 0.000893] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs vm # [ 0.000896] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT vm # [ 0.002825] found SMP MP-table at [mem 0x000f5490-0x000f549f] vm # [ 0.002833] Using GB pages for direct mapping vm # [ 0.003000] RAMDISK: [mem 0x3455d000-0x362a5fff] vm # [ 0.003141] ACPI: Early table checksum verification disabled vm # [ 0.003143] ACPI: RSDP 0x00000000000F52B0 000014 (v00 BOCHS ) vm # [ 0.003147] ACPI: RSDT 0x000000005DBE23A7 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm # [ 0.003151] ACPI: FACP 0x000000005DBE2253 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm # [ 0.003154] ACPI: DSDT 0x000000005DBE0040 002213 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm # [ 0.003157] ACPI: FACS 0x000000005DBE0000 000040 vm # [ 0.003158] ACPI: APIC 0x000000005DBE22C7 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001) vm # [ 0.003160] ACPI: HPET 0x000000005DBE2347 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm # [ 0.003162] ACPI: WAET 0x000000005DBE237F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm # [ 0.003164] ACPI: Reserving FACP table memory at [mem 0x5dbe2253-0x5dbe22c6] vm # [ 0.003165] ACPI: Reserving DSDT table memory at [mem 0x5dbe0040-0x5dbe2252] vm # [ 0.003166] ACPI: Reserving FACS table memory at [mem 0x5dbe0000-0x5dbe003f] vm # [ 0.003167] ACPI: Reserving APIC table memory at [mem 0x5dbe22c7-0x5dbe2346] vm # [ 0.003167] ACPI: Reserving HPET table memory at [mem 0x5dbe2347-0x5dbe237e] vm # [ 0.003168] ACPI: Reserving WAET table memory at [mem 0x5dbe237f-0x5dbe23a6] vm # [ 0.003773] No NUMA configuration found vm # [ 0.003775] Faking a node at [mem 0x0000000000000000-0x000000005dbdffff] vm # [ 0.003783] NODE_DATA(0) allocated [mem 0x5dbb5000-0x5dbdffff] vm # [ 0.003956] Zone ranges: vm # [ 0.003957] DMA [mem 0x0000000000001000-0x0000000000ffffff] vm # [ 0.003958] DMA32 [mem 0x0000000001000000-0x000000005dbdffff] vm # [ 0.003960] Normal empty vm # [ 0.003960] Device empty vm # [ 0.003961] Movable zone start for each node vm # [ 0.003962] Early memory node ranges vm # [ 0.003963] node 0: [mem 0x0000000000001000-0x000000000009efff] vm # [ 0.003964] node 0: [mem 0x0000000000100000-0x000000005dbdffff] vm # [ 0.003965] Initmem setup node 0 [mem 0x0000000000001000-0x000000005dbdffff] vm # [ 0.003977] On node 0, zone DMA: 1 pages in unavailable ranges vm # [ 0.003989] On node 0, zone DMA: 97 pages in unavailable ranges vm # [ 0.005071] On node 0, zone DMA32: 9248 pages in unavailable ranges vm # [ 0.005917] ACPI: PM-Timer IO Port: 0x608 vm # [ 0.005928] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) vm # [ 0.005958] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 vm # [ 0.005960] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) vm # [ 0.005962] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) vm # [ 0.005963] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) vm # [ 0.005964] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) vm # [ 0.005965] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) vm # [ 0.005967] ACPI: Using ACPI (MADT) for SMP configuration information vm # [ 0.005968] ACPI: HPET id: 0x8086a201 base: 0xfed00000 vm # [ 0.005971] TSC deadline timer available vm # [ 0.005972] smpboot: Allowing 2 CPUs, 0 hotplug CPUs vm # [ 0.005986] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() vm # [ 0.005998] kvm-guest: KVM setup pv remote TLB flush vm # [ 0.006001] kvm-guest: setup PV sched yield vm # [ 0.006006] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] vm # [ 0.006008] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] vm # [ 0.006009] [mem 0x5dc00000-0xfeffbfff] available for PCI devices vm # [ 0.006010] Booting paravirtualized kernel on KVM vm # [ 0.006012] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns vm # [ 0.006017] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 vm # [ 0.006109] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u1048576 vm # [ 0.006146] kvm-guest: PV spinlocks enabled vm # [ 0.006148] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) vm # [ 0.006151] Kernel command line: BOOT_IMAGE=/vmlinuz-6.8.0-117-generic root=LABEL=cloudimg-rootfs ro console=tty1 console=ttyS0 vm # [ 0.006201] random: crng init done vm # [ 0.006275] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) vm # [ 0.006316] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) vm # [ 0.006339] Fallback order for Node 0: 0 vm # [ 0.006341] Built 1 zonelists, mobility grouping on. Total pages: 377712 vm # [ 0.006342] Policy zone: DMA32 vm # [ 0.006346] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm # [ 0.008159] Memory: 1421748K/1535480K available (22528K kernel code, 4438K rwdata, 14416K rodata, 4924K init, 4788K bss, 113528K reserved, 0K cma-reserved) vm # [ 0.008819] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 vm # [ 0.008838] ftrace: allocating 58286 entries in 228 pages vm # [ 0.019864] ftrace: allocated 228 pages with 4 groups vm # [ 0.020602] Dynamic Preempt: voluntary vm # [ 0.020637] rcu: Preemptible hierarchical RCU implementation. vm # [ 0.020638] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. vm # [ 0.020639] Trampoline variant of Tasks RCU enabled. vm # [ 0.020640] Rude variant of Tasks RCU enabled. vm # [ 0.020640] Tracing variant of Tasks RCU enabled. vm # [ 0.020641] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. vm # [ 0.020641] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 vm # [ 0.020648] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm # [ 0.020649] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm # [ 0.020650] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm # [ 0.023087] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16 vm # [ 0.023278] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm # [ 0.041226] Console: colour VGA+ 80x25 vm # [ 0.041231] printk: legacy console [tty1] enabled vm # [ 0.079345] printk: legacy console [ttyS0] enabled vm # [ 0.250726] ACPI: Core revision 20230628 vm # [ 0.252194] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns vm # [ 0.255053] APIC: Switch to symmetric I/O mode setup vm # [ 0.256786] x2apic enabled vm # [ 0.258017] APIC: Switched APIC routing to: physical x2apic vm # [ 0.259747] kvm-guest: APIC: send_IPI_mask() replaced with kvm_send_ipi_mask() vm # [ 0.261938] kvm-guest: APIC: send_IPI_mask_allbutself() replaced with kvm_send_ipi_mask_allbutself() vm # [ 0.264658] kvm-guest: setup PV IPIs vm # [ 0.267002] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 vm # [ 0.268846] tsc: Marking TSC unstable due to TSCs unsynchronized vm # [ 0.270671] Calibrating delay loop (skipped) preset value.. 4800.03 BogoMIPS (lpj=2400018) vm # [ 0.272769] x86/cpu: User Mode Instruction Prevention (UMIP) activated vm # [ 0.274760] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 vm # [ 0.275987] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 vm # [ 0.277006] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization vm # [ 0.278110] Spectre V2 : Mitigation: Enhanced / Automatic IBRS vm # [ 0.279672] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier vm # [ 0.281121] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl vm # [ 0.282671] active return thunk: srso_alias_return_thunk vm # [ 0.283980] Speculative Return Stack Overflow: Mitigation: Safe RET vm # [ 0.285002] Transient Scheduler Attacks: Mitigation: Clear CPU buffers vm # [ 0.286038] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' vm # [ 0.287670] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' vm # [ 0.288989] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' vm # [ 0.289988] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' vm # [ 0.290998] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' vm # [ 0.292000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' vm # [ 0.293007] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' vm # [ 0.294079] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' vm # [ 0.295670] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 vm # [ 0.297670] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 vm # [ 0.298984] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 vm # [ 0.299990] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 vm # [ 0.300993] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 vm # [ 0.301982] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16 vm # [ 0.303670] x86/fpu: Enabled xstate features 0xae7, context size is 2456 bytes, using 'compacted' format. vm # [ 0.335658] Freeing SMP alternatives memory: 48K vm # [ 0.335961] pid_max: default: 32768 minimum: 301 vm # [ 0.337015] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity vm # [ 0.338690] landlock: Up and running. vm # [ 0.339936] Yama: becoming mindful. vm # [ 0.340985] AppArmor: AppArmor initialized vm # [ 0.342685] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) vm # [ 0.344673] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) vm # [ 0.346977] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1) vm # [ 0.348350] Performance Events: Fam17h+ core perfctr, AMD PMU driver. vm # [ 0.348995] ... version: 2 vm # [ 0.349944] ... bit width: 48 vm # [ 0.350958] ... generic registers: 6 vm # [ 0.351946] ... value mask: 0000ffffffffffff vm # [ 0.352982] ... max period: 00007fffffffffff vm # [ 0.353969] ... fixed-purpose events: 0 vm # [ 0.354944] ... event mask: 000000000000003f vm # [ 0.356083] signal: max sigframe size: 3376 vm # [ 0.357009] rcu: Hierarchical SRCU implementation. vm # [ 0.357987] rcu: Max phase no-delay instances is 400. vm # [ 0.362479] smp: Bringing up secondary CPUs ... vm # [ 0.363109] smpboot: x86: Booting SMP configuration: vm # [ 0.363968] .... node #0, CPUs: #1 vm # [ 0.364761] smp: Brought up 1 node, 2 CPUs vm # [ 0.366959] smpboot: Max logical packages: 1 vm # [ 0.367951] smpboot: Total of 2 processors activated (9600.07 BogoMIPS) vm # [ 0.369317] devtmpfs: initialized vm # [ 0.369993] x86/mm: Memory block size: 128MB vm # [ 0.371416] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns vm # [ 0.372126] futex hash table entries: 512 (order: 3, 32768 bytes, linear) vm # [ 0.373074] pinctrl core: initialized pinctrl subsystem vm # [ 0.374202] PM: RTC time: 07:16:20, date: 2026-07-15 vm # [ 0.375377] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm # [ 0.376133] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations vm # [ 0.377019] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm # [ 0.378095] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm # [ 0.379111] audit: initializing netlink subsys (disabled) vm # [ 0.380027] audit: type=2000 audit(1784099780.842:1): state=initialized audit_enabled=0 res=1 vm # [ 0.380027] thermal_sys: Registered thermal governor 'fair_share' vm # [ 0.381101] thermal_sys: Registered thermal governor 'bang_bang' vm # [ 0.381986] thermal_sys: Registered thermal governor 'step_wise' vm # [ 0.382983] thermal_sys: Registered thermal governor 'user_space' vm # [ 0.383994] thermal_sys: Registered thermal governor 'power_allocator' vm # [ 0.385013] cpuidle: using governor ladder vm # [ 0.386969] cpuidle: using governor menu vm # [ 0.388978] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 vm # [ 0.390200] PCI: Using configuration type 1 for base access vm # [ 0.390977] PCI: Using configuration type 1 for extended access vm # [ 0.392188] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. vm # [ 0.406882] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm # [ 0.409161] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page vm # [ 0.411123] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm # [ 0.414135] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page vm # [ 0.419006] ACPI: Added _OSI(Module Device) vm # [ 0.421059] ACPI: Added _OSI(Processor Device) vm # [ 0.422051] ACPI: Added _OSI(Processor Aggregator Device) vm # [ 0.427082] ACPI: 1 ACPI AML tables successfully acquired and loaded vm # [ 0.430742] ACPI: _OSC evaluation for CPUs failed, trying _PDC vm # [ 0.432238] ACPI: Interpreter enabled vm # [ 0.433961] ACPI: PM: (supports S0 S3 S4 S5) vm # [ 0.434952] ACPI: Using IOAPIC for interrupt routing vm # [ 0.437203] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug vm # [ 0.439120] PCI: Using E820 reservations for host bridge windows vm # [ 0.441161] ACPI: Enabled 2 GPEs in block 00 to 0F vm # [ 0.447290] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) vm # [ 0.449023] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] vm # [ 0.452754] acpiphp: Slot [3] registered vm # [ 0.453974] acpiphp: Slot [4] registered vm # [ 0.454975] acpiphp: Slot [5] registered vm # [ 0.455978] acpiphp: Slot [6] registered vm # [ 0.456986] acpiphp: Slot [7] registered vm # [ 0.459006] acpiphp: Slot [8] registered vm # [ 0.459973] acpiphp: Slot [9] registered vm # [ 0.460986] acpiphp: Slot [10] registered vm # [ 0.462974] acpiphp: Slot [11] registered vm # [ 0.463978] acpiphp: Slot [12] registered vm # [ 0.464977] acpiphp: Slot [13] registered vm # [ 0.465986] acpiphp: Slot [14] registered vm # [ 0.467996] acpiphp: Slot [15] registered vm # [ 0.468973] acpiphp: Slot [16] registered vm # [ 0.469992] acpiphp: Slot [17] registered vm # [ 0.471974] acpiphp: Slot [18] registered vm # [ 0.472997] acpiphp: Slot [19] registered vm # [ 0.473983] acpiphp: Slot [20] registered vm # [ 0.474975] acpiphp: Slot [21] registered vm # [ 0.476974] acpiphp: Slot [22] registered vm # [ 0.477975] acpiphp: Slot [23] registered vm # [ 0.478986] acpiphp: Slot [24] registered vm # [ 0.481001] acpiphp: Slot [25] registered vm # [ 0.481974] acpiphp: Slot [26] registered vm # [ 0.482984] acpiphp: Slot [27] registered vm # [ 0.483975] acpiphp: Slot [28] registered vm # [ 0.485974] acpiphp: Slot [29] registered vm # [ 0.486988] acpiphp: Slot [30] registered vm # [ 0.487977] acpiphp: Slot [31] registered vm # [ 0.489995] PCI host bridge to bus 0000:00 vm # [ 0.490948] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] vm # [ 0.492999] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] vm # [ 0.494999] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] vm # [ 0.497091] pci_bus 0000:00: root bus resource [mem 0x5dc00000-0xfebfffff window] vm # [ 0.499094] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window] vm # [ 0.501083] pci_bus 0000:00: root bus resource [bus 00-ff] vm # [ 0.503312] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint vm # [ 0.506962] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint vm # [ 0.510010] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint vm # [ 0.514520] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f] vm # [ 0.517087] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk vm # [ 0.519012] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk vm # [ 0.521000] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk vm # [ 0.523000] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk vm # [ 0.524298] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint vm # [ 0.527770] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI vm # [ 0.530092] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB vm # [ 0.532378] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint vm # [ 0.537734] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] vm # [ 0.540034] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff] vm # [ 0.542045] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref] vm # [ 0.543083] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] vm # [ 0.547074] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm # [ 0.552709] pci 0000:00:03.0: BAR 0 [io 0xc080-0xc09f] vm # [ 0.554008] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] vm # [ 0.556046] pci 0000:00:03.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref] vm # [ 0.560760] pci 0000:00:04.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm # [ 0.565709] pci 0000:00:04.0: BAR 0 [io 0xc0a0-0xc0bf] vm # [ 0.566994] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff] vm # [ 0.569057] pci 0000:00:04.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref] vm # [ 0.571013] pci 0000:00:04.0: ROM [mem 0xfeb80000-0xfebbffff pref] vm # [ 0.575900] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm # [ 0.580686] pci 0000:00:05.0: BAR 0 [io 0xc000-0xc03f] vm # [ 0.581983] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] vm # [ 0.584034] pci 0000:00:05.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref] vm # [ 0.588257] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm # [ 0.593706] pci 0000:00:06.0: BAR 0 [io 0xc0c0-0xc0df] vm # [ 0.594997] pci 0000:00:06.0: BAR 1 [mem 0xfebd4000-0xfebd4fff] vm # [ 0.597045] pci 0000:00:06.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref] vm # [ 0.601252] pci 0000:00:07.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm # [ 0.606707] pci 0000:00:07.0: BAR 0 [io 0xc0e0-0xc0ff] vm # [ 0.608988] pci 0000:00:07.0: BAR 1 [mem 0xfebd5000-0xfebd5fff] vm # [ 0.610040] pci 0000:00:07.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref] vm # [ 0.614294] pci 0000:00:08.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm # [ 0.620718] pci 0000:00:08.0: BAR 0 [io 0xc040-0xc07f] vm # [ 0.621996] pci 0000:00:08.0: BAR 1 [mem 0xfebd6000-0xfebd6fff] vm # [ 0.624066] pci 0000:00:08.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref] vm # [ 0.628270] pci 0000:00:09.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm # [ 0.633708] pci 0000:00:09.0: BAR 0 [io 0xc100-0xc11f] vm # [ 0.635004] pci 0000:00:09.0: BAR 1 [mem 0xfebd7000-0xfebd7fff] vm # [ 0.637066] pci 0000:00:09.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref] vm # [ 0.651116] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 vm # [ 0.653233] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 vm # [ 0.655209] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 vm # [ 0.657209] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 vm # [ 0.659122] ACPI: PCI: Interrupt link LNKS configured for IRQ 9 vm # [ 0.661730] iommu: Default domain type: Translated vm # [ 0.663007] iommu: DMA domain TLB invalidation policy: lazy mode vm # [ 0.664256] SCSI subsystem initialized vm # [ 0.664972] ACPI: bus type USB registered vm # [ 0.665698] usbcore: registered new interface driver usbfs vm # [ 0.668005] usbcore: registered new interface driver hub vm # [ 0.669004] usbcore: registered new device driver usb vm # [ 0.671018] pps_core: LinuxPPS API ver. 1 registered vm # [ 0.683674] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti vm # [ 0.686143] PTP clock support registered vm # [ 0.687707] EDAC MC: Ver: 3.0.0 vm # [ 0.689814] NetLabel: Initializing vm # [ 0.690672] NetLabel: domain hash size = 128 vm # [ 0.691951] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO vm # [ 0.694028] NetLabel: unlabeled traffic allowed by default vm # [ 0.695694] mctp: management component transport protocol core vm # [ 0.696995] NET: Registered PF_MCTP protocol family vm # [ 0.698998] PCI: Using ACPI for IRQ routing vm # [ 0.700693] pci 0000:00:02.0: vgaarb: setting as boot VGA device vm # [ 0.701667] pci 0000:00:02.0: vgaarb: bridge control possible vm # [ 0.701667] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none vm # [ 0.706674] vgaarb: loaded vm # [ 0.707757] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 vm # [ 0.708970] hpet0: 3 comparators, 64-bit 100.000000 MHz counter vm # [ 0.712729] clocksource: Switched to clocksource kvm-clock vm # [ 0.715307] VFS: Disk quotas dquot_6.6.0 vm # [ 0.716623] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm # [ 0.718939] AppArmor: AppArmor Filesystem Enabled vm # [ 0.720458] pnp: PnP ACPI init vm # [ 0.722036] pnp: PnP ACPI: found 6 devices vm # [ 0.730815] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns vm # [ 0.733500] NET: Registered PF_INET protocol family vm # [ 0.735026] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) vm # [ 0.750486] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) vm # [ 0.753007] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm # [ 0.755325] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) vm # [ 0.757683] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear) vm # [ 0.759900] TCP: Hash tables configured (established 16384 bind 16384) vm # [ 0.761874] MPTCP token hash table entries: 2048 (order: 4, 49152 bytes, linear) vm # [ 0.764095] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) vm # [ 0.766061] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) vm # [ 0.768180] NET: Registered PF_UNIX/PF_LOCAL protocol family vm # [ 0.769890] NET: Registered PF_XDP protocol family vm # [ 0.771356] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] vm # [ 0.773170] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] vm # [ 0.775014] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] vm # [ 0.777018] pci_bus 0000:00: resource 7 [mem 0x5dc00000-0xfebfffff window] vm # [ 0.779034] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window] vm # [ 0.781154] pci 0000:00:01.0: PIIX3: Enabling Passive Release vm # [ 0.782902] pci 0000:00:00.0: Limiting direct PCI/PCI transfers vm # [ 0.784839] PCI: CLS 0 bytes, default 64 vm # [ 0.786354] Trying to unpack rootfs image as initramfs... vm # [ 0.790003] Initialise system trusted keyrings vm # [ 0.791899] Key type blacklist registered vm # [ 0.793301] workingset: timestamp_bits=36 max_order=19 bucket_order=0 vm # [ 0.795229] zbud: loaded vm # [ 0.796376] squashfs: version 4.0 (2009/01/31) Phillip Lougher vm # [ 0.798242] fuse: init (API version 7.39) vm # [ 0.799707] integrity: Platform Keyring initialized vm # [ 0.801209] integrity: Machine keyring initialized vm # [ 0.812966] Key type asymmetric registered vm # [ 0.814271] Asymmetric key parser 'x509' registered vm # [ 0.815792] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) vm # [ 0.818132] io scheduler mq-deadline registered vm # [ 0.819765] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 vm # [ 0.821906] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 vm # [ 0.824365] ACPI: button: Power Button [PWRF] vm # [ 0.827935] ACPI: \_SB_.LNKC: Enabled at IRQ 11 vm # [ 0.832704] ACPI: \_SB_.LNKD: Enabled at IRQ 10 vm # [ 0.837432] ACPI: \_SB_.LNKA: Enabled at IRQ 10 vm # [ 0.842179] ACPI: \_SB_.LNKB: Enabled at IRQ 11 vm # [ 0.854843] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled vm # [ 0.883004] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A vm # [ 0.884189] Freeing initrd memory: 29988K vm # [ 0.902955] Linux agpgart interface v0.103 vm # [ 0.906006] loop: module loaded vm # [ 0.908362] scsi host0: ata_piix vm # [ 0.909595] scsi host1: ata_piix vm # [ 0.910719] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0 vm # [ 0.913037] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0 vm # [ 0.916161] ACPI: bus type drm_connector registered vm # [ 0.917945] tun: Universal TUN/TAP device driver, 1.6 vm # [ 0.921281] PPP generic driver version 2.4.2 vm # [ 0.922804] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 vm # [ 0.926209] serio: i8042 KBD port at 0x60,0x64 irq 1 vm # [ 0.927756] serio: i8042 AUX port at 0x60,0x64 irq 12 vm # [ 0.929618] mousedev: PS/2 mouse device common for all mice vm # [ 0.931448] rtc_cmos 00:05: RTC can wake from S4 vm # [ 0.934005] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 vm # [ 0.936891] rtc_cmos 00:05: registered as rtc0 vm # [ 0.938416] rtc_cmos 00:05: setting system clock to 2026-07-15T07:16:21 UTC (1784099781) vm # [ 0.940924] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs vm # [ 0.943186] i2c_dev: i2c /dev entries driver vm # [ 0.944560] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. vm # [ 0.948022] device-mapper: uevent: version 1.0.3 vm # [ 0.949565] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com vm # [ 0.952061] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled vm # [ 0.954350] ledtrig-cpu: registered to indicate activity on CPUs vm # [ 0.956224] drop_monitor: Initializing network drop monitor service vm # [ 0.958208] NET: Registered PF_INET6 protocol family vm # [ 0.966226] Segment Routing with IPv6 vm # [ 0.967496] In-situ OAM (IOAM) with IPv6 vm # [ 0.968783] NET: Registered PF_PACKET protocol family vm # [ 0.970404] Key type dns_resolver registered vm # [ 0.972122] IPI shorthand broadcast: enabled vm # [ 0.975729] sched_clock: Marking stable (736001456, 239384254)->(1047070067, -71684357) vm # [ 0.978262] registered taskstats version 1 vm # [ 0.979867] Loading compiled-in X.509 certificates vm # [ 0.981827] Loaded X.509 cert 'Build time autogenerated kernel key: 4616851849424b6aa13d3fe487d4bbc60db2a85f' vm # [ 0.985182] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing 2025 Kmod: d541cef61dc7e793b7eb7e899970a2eef0b5dc8c' vm # [ 0.988632] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' vm # [ 0.991834] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing 2025 Kmod: 4627603d2357a2a3f81006370894c221175893e9' vm # [ 0.995348] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' vm # [ 0.998266] blacklist: Loading compiled-in revocation X.509 certificates vm # [ 1.000265] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' vm # [ 1.003137] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' vm # [ 1.006171] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' vm # [ 1.009284] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' vm # [ 1.012319] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' vm # [ 1.015451] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' vm # [ 1.018529] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' vm # [ 1.021607] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' vm # [ 1.029904] Key type .fscrypt registered vm # [ 1.031161] Key type fscrypt-provisioning registered vm # [ 1.038184] cryptd: max_cpu_qlen set to 1000 vm # [ 1.070649] ata2: found unknown device (class 0) vm # [ 1.072990] ata1: found unknown device (class 0) vm # [ 1.078330] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 vm # [ 1.080565] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100 vm # [ 1.084943] ata1.00: 9437184 sectors, multi 16: LBA48 vm # [ 1.091161] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 vm # [ 1.097849] sd 0:0:0:0: Attached scsi generic sg0 type 0 vm # [ 1.097913] sd 0:0:0:0: [sda] 9437184 512-byte logical blocks: (4.83 GB/4.50 GiB) vm # [ 1.103778] sd 0:0:0:0: [sda] Write Protect is off vm # [ 1.105440] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 vm # [ 1.111002] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA vm # [ 1.114196] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes vm # [ 1.125695] GPT:Primary header thinks Alt. header is not at the end of the disk. vm # [ 1.127946] GPT:7340031 != 9437183 vm # [ 1.129072] GPT:Alternate GPT header not at the end of the disk. vm # [ 1.130894] GPT:7340031 != 9437183 vm # [ 1.132033] GPT: Use GNU Parted to correct GPT errors. vm # [ 1.133631] sda: sda1 sda14 sda15 sda16 vm # [ 1.135250] sd 0:0:0:0: [sda] Attached SCSI disk vm # [ 1.138514] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray vm # [ 1.143471] cdrom: Uniform CD-ROM driver Revision: 3.20 vm # [ 1.154799] sr 1:0:0:0: Attached scsi generic sg1 type 5 vm # [ 1.162419] AVX2 version of gcm_enc/dec engaged. vm # [ 1.176066] AES CTR mode by8 optimization enabled vm # [ 1.191185] Key type encrypted registered vm # [ 1.192527] AppArmor: AppArmor sha256 policy hashing enabled vm # [ 1.194240] ima: No TPM chip found, activating TPM-bypass! vm # [ 1.195940] Loading compiled-in module X.509 certificates vm # [ 1.197973] Loaded X.509 cert 'Build time autogenerated kernel key: 4616851849424b6aa13d3fe487d4bbc60db2a85f' vm # [ 1.200876] ima: Allocated hash algorithm: sha256 vm # [ 1.202346] ima: No architecture policies found vm # [ 1.203779] evm: Initialising EVM extended attributes: vm # [ 1.205342] evm: security.selinux vm # [ 1.206476] evm: security.SMACK64 vm # [ 1.207554] evm: security.SMACK64EXEC vm # [ 1.208746] evm: security.SMACK64TRANSMUTE vm # [ 1.210054] evm: security.SMACK64MMAP vm # [ 1.211243] evm: security.apparmor vm # [ 1.212408] evm: security.ima vm # [ 1.213420] evm: security.capability vm # [ 1.214598] evm: HMAC attrs: 0x1 vm # [ 1.216053] PM: Magic number: 2:593:268 vm # [ 1.232005] RAS: Correctable Errors collector initialized. vm # [ 1.236370] clk: Disabling unused clocks vm # [ 1.243263] Freeing unused decrypted memory: 2028K vm # [ 1.247458] Freeing unused kernel image (initmem) memory: 4924K vm # [ 1.250892] Write protecting the kernel read-only data: 38912k vm # [ 1.255619] Freeing unused kernel image (rodata/data gap) memory: 1968K vm # [ 1.316603] x86/mm: Checked W+X mappings: passed, no W+X pages found. vm # [ 1.318145] Run /init as init process vm # Loading, please wait... vm # Starting systemd-udevd version 255.4-1ubuntu8.15 vm # [ 1.466378] Floppy drive(s): fd0 is 2.88M AMI BIOS vm # [ 1.470168] virtio_net virtio1 ens4: renamed from eth0 vm # [ 1.484569] FDC 0 is a S82078B vm # [ 1.495574] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input4 vm # [ 1.498477] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3 vm # Begin: Loading essential drivers ... [ 2.771392] raid6: avx512x4 gen() 22259 MB/s vm # [ 2.790392] raid6: avx512x2 gen() 45613 MB/s vm # [ 2.808393] raid6: avx512x1 gen() 42681 MB/s vm # [ 2.826391] raid6: avx2x4 gen() 46577 MB/s vm # [ 2.844391] raid6: avx2x2 gen() 48369 MB/s vm # [ 2.862392] raid6: avx2x1 gen() 39098 MB/s vm # [ 2.863447] raid6: using algorithm avx2x2 gen() 48369 MB/s vm # [ 2.881390] raid6: .... xor() 35491 MB/s, rmw enabled vm # [ 2.882606] raid6: using avx512x2 recovery algorithm vm # [ 2.884647] xor: automatically using best checksumming function avx vm # [ 2.886905] async_tx: api initialized (async) vm # done. vm # Begin: Running /scripts/init-premount ... done. vm # Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. vm # Begin: Running /scripts/local-premount ... [ 2.996703] Btrfs loaded, zoned=yes, fsverity=yes vm # Scanning for Btrfs filesystems vm # [ 3.092535] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 vm # [ 3.097217] floppy: error 10 while reading block 0 vm # done. vm # Warning: fsck not present, so skipping root file system vm # [ 3.217064] EXT4-fs (sda1): mounted filesystem b6730d0f-2634-4914-bca0-f58bb6add294 ro with ordered data mode. Quota mode: none. vm # done. vm # Begin: Running /scripts/local-bottom ... done. vm # Begin: Running /scripts/init-bottom ... done. vm # [ 3.545723] systemd[1]: Inserted module 'autofs4' vm # [ 3.578873] systemd[1]: systemd 255.4-1ubuntu8.15 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) vm # [ 3.585540] systemd[1]: Detected virtualization kvm. vm # [ 3.586742] systemd[1]: Detected architecture x86-64. vm # vm # Welcome to Ubuntu 24.04.4 LTS! vm # vm # [ 3.592075] systemd[1]: Hostname set to . vm # [ 3.839474] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 vm # [ 3.844166] floppy: error 10 while reading block 0 vm # [ 4.370960] systemd[1]: Queued start job for default target graphical.target. vm # [ 4.388875] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. vm # [ OK ] Created slice system-modprobe.slice - Slice /system/modprobe. vm # [ 4.399171] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. vm # [ OK ] Created slice system-systemd\x2dfs…slice - Slice /system/systemd-fsck. vm # [ 4.410155] systemd[1]: Created slice user.slice - User and Session Slice. vm # [ OK ] Created slice user.slice - User and Session Slice. vm # [ 4.418679] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. vm # [ OK ] Started systemd-ask-password-wall.…d Requests to Wall Directory Watch. vm # [ 4.430237] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. vm # [ OK ] Set up automount proc-sys-fs-binfm…ormats File System Automount Point. vm # [ 4.441121] systemd[1]: Expecting device dev-disk-by\x2dlabel-BOOT.device - /dev/disk/by-label/BOOT... vm # Expecting device dev-disk-by\x2dla…device - /dev/disk/by-label/BOOT... vm # [ 4.449148] systemd[1]: Expecting device dev-disk-by\x2dlabel-UEFI.device - /dev/disk/by-label/UEFI... vm # Expecting device dev-disk-by\x2dla…device - /dev/disk/by-label/UEFI... vm # [ 4.456148] systemd[1]: Expecting device dev-hvc0.device - /dev/hvc0... vm # Expecting device dev-hvc0.device - /dev/hvc0... vm # [ 4.459077] systemd[1]: Expecting device dev-ttyS0.device - /dev/ttyS0... vm # Expecting device dev-ttyS0.device - /dev/ttyS0... vm # [ 4.462086] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. vm # [ OK ] Reached target integritysetup.targ… Local Integrity Protected Volumes. vm # [ 4.466136] systemd[1]: Reached target slices.target - Slice Units. vm # [ OK ] Reached target slices.target - Slice Units. vm # [ 4.469119] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. vm # [ OK ] Reached target snapd.mounts-pre.target - Mounting snaps. vm # [ 4.472600] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. vm # [ OK ] Reached target snapd.mounts.target - Mounted snaps. vm # [ 4.475858] systemd[1]: Reached target swap.target - Swaps. vm # [ OK ] Reached target swap.target - Swaps. vm # [ 4.478578] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. vm # [ OK ] Reached target veritysetup.target - Local Verity Protected Volumes. vm # [ 4.482542] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. vm # [ OK ] Listening on dm-event.socket - Device-mapper event daemon FIFOs. vm # [ 4.486450] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. vm # [ OK ] Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. vm # [ 4.490179] systemd[1]: Listening on multipathd.socket - multipathd control socket. vm # [ OK ] Listening on multipathd.socket - multipathd control socket. vm # [ 4.493882] systemd[1]: Listening on syslog.socket - Syslog Socket. vm # [ OK ] Listening on syslog.socket - Syslog Socket. vm # [ 4.496972] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. vm # [ OK ] Listening on systemd-fsckd.socket …fsck to fsckd communication Socket. vm # [ 4.501029] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. vm # [ OK ] Listening on systemd-initctl.socke…- initctl Compatibility Named Pipe. vm # [ 4.505132] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). vm # [ OK ] Listening on systemd-journald-dev-…socket - Journal Socket (/dev/log). vm # [ 4.509294] systemd[1]: Listening on systemd-journald.socket - Journal Socket. vm # [ OK ] Listening on systemd-journald.socket - Journal Socket. vm # [ 4.512886] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. vm # [ OK ] Listening on systemd-networkd.socket - Network Service Netlink Socket. vm # [ 4.516858] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm # [ 4.520139] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. vm # [ OK ] Listening on systemd-udevd-control.socket - udev Control Socket. vm # [ 4.524005] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. vm # [ OK ] Listening on systemd-udevd-kernel.socket - udev Kernel Socket. vm # [ 4.534448] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... vm # Mounting dev-hugepages.mount - Huge Pages File System... vm # [ 4.543480] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... vm # Mounting dev-mqueue.mount - POSIX Message Queue File System... vm # [ 4.549633] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... vm # Mounting sys-kernel-debug.mount - Kernel Debug File System... vm # [ 4.554482] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... vm # Mounting sys-kernel-tracing.mount - Kernel Trace File System... vm # [ 4.562663] systemd[1]: Starting systemd-journald.service - Journal Service... vm # Starting systemd-journald.service - Journal Service... vm # [ 4.582512] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... vm # Starting keyboard-setup.service - Set the console keyboard layout... vm # [ 4.591467] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... vm # Starting kmod-static-nodes.service…eate List of Static Device Nodes... vm # [ 4.608881] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... vm # Starting lvm2-monitor.service - Mo…ing dmeventd or progress polling... vm # [ 4.619687] systemd-journald[292]: Collecting audit messages is disabled. vm # [ 4.625142] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... vm # Starting modprobe@configfs.service - Load Kernel Module configfs... vm # [ 4.652480] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... vm # Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... vm # [ 4.662017] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... vm # Starting modprobe@drm.service - Load Kernel Module drm... vm # [ 4.668568] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... vm # Starting modprobe@efi_pstore.servi… - Load Kernel Module efi_pstore... vm # [ 4.678494] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... vm # Starting modprobe@fuse.service - Load Kernel Module fuse... vm # [ 4.684459] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... vm # Starting modprobe@loop.service - Load Kernel Module loop... vm # [ 4.689898] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). vm # [ 4.700086] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... vm # Starting systemd-fsck-root.service…File System Check on Root Device... vm # [ 4.720527] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... vm # [ 4.722711] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm # Starting systemd-modules-load.service - Lo[ 4.726700] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm # ad Kernel Modules... vm # [ 4.731503] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... vm # Starting systemd-udev-trigger.service - Coldplug All udev Devices... vm # [ 4.741580] systemd[1]: Started systemd-journald.service - Journal Service. vm # [ OK ] Started systemd-journald.service - Journal Service. vm # [ OK ] Mounted dev-hugepages.mount - Huge Pages File System. vm # [ OK ] Mounted dev-mqueue.mount - POSIX Message Queue File System. vm # [ OK ] Mounted sys-kernel-debug.mount - Kernel Debug File System. vm # [ OK ] Mounted sys-kernel-tracing.mount - Kernel Trace File System. vm # [ OK ] Finished keyboard-setup.service - Set the console keyboard layout. vm # [ OK ] Finished kmod-static-nodes.service…Create List of Static Device Nodes. vm # [ OK ] Finished lvm2-monitor.service - Mo…using dmeventd or progress polling. vm # [ OK ] Finished modprobe@configfs.service - Load Kernel Module configfs. vm # [ OK ] Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. vm # [ OK ] Finished modprobe@drm.service - Load Kernel Module drm. vm # [ OK ] Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. vm # [ OK ] Finished modprobe@fuse.service - Load Kernel Module fuse. vm # [ OK ] Finished modprobe@loop.service - Load Kernel Module loop. vm # [ OK ] Finished systemd-fsck-root.service - File System Check on Root Device. vm # [ OK ] Finished systemd-modules-load.service - Load Kernel Modules. vm # Mounting sys-fs-fuse-connections.mount - FUSE Control File System... vm # Mounting sys-kernel-config.mount - Kernel Configuration File System... vm # [ OK ] Started systemd-fsckd.service - Fi…stem Check Daemon to report status. vm # Starting systemd-remount-fs.servic…unt Root and Kernel File Systems... vm # Starting systemd-sysctl.service - Apply Kernel Variables... vm # Starting systemd-tmpfiles-setup-de… Device Nodes in /dev gracefully... vm # [ OK ] Mounted sys-fs-fuse-connections.mount - FUSE Control File System. vm # [ OK ] Mounted sys-kernel-config.mount - Kernel Configuration File System. vm # [ 4.853816] EXT4-fs (sda1): re-mounted b6730d0f-2634-4914-bca0-f58bb6add294 r/w. vm # [ OK ] Finished systemd-remount-fs.servic…mount Root and Kernel File Systems. vm # Starting multipathd.service - Devi…pper Multipath Device Controller... vm # Starting systemd-journal-flush.ser…sh Journal to Persistent Storage... vm # Starting systemd-random-seed.service - Load/Save OS Random Seed... vm # [ OK ] Finished systemd-udev-trigger.service - Coldplug All udev Devices. vm # [ OK ] Finished systemd-sysctl.service - Apply Kernel Variables. vm # [ OK ] Finished systemd-tmpfiles-setup-de…ic Device Nodes in /dev gracefully. vm # Starting systemd-sysusers.service - Create System Users... vm # [ OK ] Finished systemd-random-seed.service - Load/Save OS Random Seed. vm # [ OK ] Finished systemd-journal-flush.ser…lush Journal to Persistent Storage. vm # [ OK ] Finished systemd-sysusers.service - Create System Users. vm # Starting systemd-tmpfiles-setup-de…eate Static Device Nodes in /dev... vm # [ OK ] Finished systemd-tmpfiles-setup-de…Create Static Device Nodes in /dev. vm # Starting systemd-udevd.service - R…ager for Device Events and Files... vm # [ OK ] Started multipathd.service - Devic…Mapper Multipath Device Controller. vm # [ OK ] Reached target local-fs-pre.target…Preparation for Local File Systems. vm # [ OK ] Started systemd-udevd.service - Ru…anager for Device Events and Files. vm # [ OK ] Started systemd-ask-password-conso…equests to Console Directory Watch. vm # [ OK ] Reached target cryptsetup.target - Local Encrypted Volumes. vm # [ OK ] Found device dev-hvc0.device - /dev/hvc0. vm # [ OK ] Found device dev-ttyS0.device - /dev/ttyS0. vm # [ OK ] Found device dev-disk-by\x2dlabel-BOOT.device - QEMU_HARDDISK BOOT. vm # Starting systemd-fsck@dev-disk-by\…Check on /dev/disk/by-label/BOOT... vm # [ OK ] Found device dev-disk-by\x2dlabel-UEFI.device - QEMU_HARDDISK UEFI. vm # Starting systemd-fsck@dev-disk-by\…Check on /dev/disk/by-label/UEFI... vm # [ OK ] Finished systemd-fsck@dev-disk-by\…m Check on /dev/disk/by-label/BOOT. vm # Mounting boot.mount - /boot... vm # [ OK ] Mounted boot.mount - /boot. vm # [ OK ] Finished systemd-fsck@dev-disk-by\…m Check on /dev/disk/by-label/UEFI. vm # Mounting boot-efi.mount - /boot/efi... vm # [ OK ] Mounted boot-efi.mount - /boot/efi. vm # [ OK ] Reached target local-fs.target - Local File Systems. vm # [ OK ] Listening on systemd-sysext.socket…tension Image Management (Varlink). vm # Starting apparmor.service - Load AppArmor profiles... vm # Starting console-setup.service - Set console font and keymap... vm # Starting finalrd.service - Create …time dir for shutdown pivot root... vm # Starting ldconfig.service - Rebuild Dynamic Linker Cache... vm # Starting plymouth-read-write.servi…ymouth To Write Out Runtime Data... vm # Starting systemd-binfmt.service - Set Up Additional Binary Formats... vm # Starting systemd-tmpfiles-setup.se…e Volatile Files and Directories... vm # Starting ufw.service - Uncomplicated firewall... vm # [ OK ] Finished console-setup.service - Set console font and keymap. vm # [ OK ] Finished finalrd.service - Create …untime dir for shutdown pivot root. vm # [ OK ] Finished plymouth-read-write.servi…Plymouth To Write Out Runtime Data. vm # [ OK ] Listening on systemd-rfkill.socket…ll Switch Status /dev/rfkill Watch. vm # Mounting proc-sys-fs-binfmt_misc.m…cutable File Formats File System... vm # [ OK ] Finished ufw.service - Uncomplicated firewall. vm # [ OK ] Reached target network-pre.target - Preparation for Network. vm # Starting systemd-networkd.service - Network Configuration... vm # [ OK ] Finished systemd-tmpfiles-setup.se…ate Volatile Files and Directories. vm # [ OK ] Mounted proc-sys-fs-binfmt_misc.mo…xecutable File Formats File System. vm # [ OK ] Finished systemd-binfmt.service - Set Up Additional Binary Formats. vm # Starting systemd-journal-catalog-u…ervice - Rebuild Journal Catalog... vm # Starting systemd-resolved.service - Network Name Resolution... vm # Starting systemd-timesyncd.service - Network Time Synchronization... vm # Starting systemd-update-utmp.servi…ord System Boot/Shutdown in UTMP... vm # [ OK ] Finished systemd-update-utmp.servi…ecord System Boot/Shutdown in UTMP. vm # [ OK ] Started systemd-networkd.service - Network Configuration. vm # [ OK ] Finished systemd-journal-catalog-u….service - Rebuild Journal Catalog. vm # Starting systemd-networkd-wait-onl…ait for Network to be Configured... vm # [ OK ] Started systemd-timesyncd.service - Network Time Synchronization. vm # [ OK ] Reached target time-set.target - System Time Set. vm # [ OK ] Started systemd-resolved.service - Network Name Resolution. vm # [ OK ] Reached target network.target - Network. vm # [ OK ] Reached target nss-lookup.target - Host and Network Name Lookups. vm # [ OK ] Finished ldconfig.service - Rebuild Dynamic Linker Cache. vm # Starting systemd-update-done.service - Update is Completed... vm # [ OK ] Finished systemd-update-done.service - Update is Completed. vm # [ OK ] Finished apparmor.service - Load AppArmor profiles. vm # Starting snapd.apparmor.service - …iles managed internally by snapd... vm # [ OK ] Finished snapd.apparmor.service - …ofiles managed internally by snapd. vm # [ OK ] Reached target sysinit.target - System Initialization. vm # [ OK ] Started apt-daily.timer - Daily apt download activities. vm # [ OK ] Started apt-daily-upgrade.timer - …y apt upgrade and clean activities. vm # [ OK ] Started dpkg-db-backup.timer - Daily dpkg database backup timer. vm # [ OK ] Started e2scrub_all.timer - Period…Metadata Check for All Filesystems. vm # [ OK ] Started fstrim.timer - Discard unused filesystem blocks once a week. vm # [ OK ] Started fwupd-refresh.timer - Refresh fwupd metadata regularly. vm # [ OK ] Started logrotate.timer - Daily rotation of log files. vm # [ OK ] Started man-db.timer - Daily man-db regeneration. vm # [ OK ] Started motd-news.timer - Message of the Day. vm # [ OK ] Started sysstat-collect.timer - Ru…y accounting tool every 10 minutes. vm # [ OK ] Started sysstat-summary.timer - Ge… of yesterday's process accounting. vm # [ OK ] Started systemd-tmpfiles-clean.tim…y Cleanup of Temporary Directories. vm # [ OK ] Reached target paths.target - Path Units. vm # [ OK ] Listening on dbus.socket - D-Bus System Message Bus Socket. vm # [ OK ] Listening on iscsid.socket - Open-iSCSI iscsid Socket. vm # Starting lxd-installer.socket - He…er to install lxd snap on demand... vm # [ OK ] Listening on uuidd.socket - UUID daemon activation socket. vm # [ OK ] Listening on lxd-installer.socket …lper to install lxd snap on demand. vm # [ OK ] Reached target sockets.target - Socket Units. vm # [ OK ] Reached target basic.target - Basic System. vm # Starting dbus.service - D-Bus System Message Bus... vm # [ OK ] Started dmesg.service - Save initial kernel messages after boot. vm # Starting e2scrub_reap.service - Re…ne ext4 Metadata Check Snapshots... vm # Starting grub-common.service - Record successful boot for GRUB... vm # Starting mount-store.service... vm # Starting polkit.service - Authorization Manager... vm # Starting resizeguest.service... vm # Starting rsyslog.service - System Logging Service... vm # [ OK ] Reached target getty-pre.target - Preparation for Logins. vm # Starting sysstat.service - Resets System Activity Logs... vm # Starting systemd-logind.service - User Login Management... vm # Starting udisks2.service - Disk Manager... vm # [ OK ] Started dbus.service - D-Bus System Message Bus. vm # [ OK ] Finished e2scrub_reap.service - Re…line ext4 Metadata Check Snapshots. vm # [ OK ] Finished mount-store.service. vm # [ OK ] Finished sysstat.service - Resets System Activity Logs. vm # [ OK ] Started backdoor.service. vm # [ OK ] Started systemd-logind.service - User Login Management. vm # connecting to host... vm # [ OK ] Started unattended-upgrades.service - Unattended Upgrades Shutdown. vm: Guest shell says: b'Spawning backdoor root shell...\n' vm: connected to guest root shell vm: (connecting took 26.14 seconds) vm: (finished: waiting for the VM to finish booting, in 26.22 seconds) vm # [ OK ] Finished grub-common.service - Record successful boot for GRUB. vm # Starting grub-initrd-fallback.service - GRUB failed boot detection... vm # [ OK ] Started polkit.service - Authorization Manager. vm # Starting ModemManager.service - Modem Manager... vm # [ OK ] Finished grub-initrd-fallback.service - GRUB failed boot detection. vm # [ OK ] Started udisks2.service - Disk Manager. vm # [ OK ] Started rsyslog.service - System Logging Service. vm # [ OK ] Started ModemManager.service - Modem Manager. vm # [ OK ] Finished systemd-networkd-wait-onl… Wait for Network to be Configured. vm # [ OK ] Reached target network-online.target - Network is Online. vm # [ OK ] Started update-notifier-download.t…hat failed at package install time. vm # [ OK ] Started update-notifier-motd.timer… a new version of Ubuntu available. vm # [ OK ] Reached target timers.target - Timer Units. vm # [ OK ] Reached target remote-fs-pre.targe…reparation for Remote File Systems. vm # [ OK ] Reached target remote-fs.target - Remote File Systems. vm # Starting apport.service - automatic crash report generation... vm # [ OK ] Finished blk-availability.service - Availability of block devices. vm # [ OK ] Started cron.service - Regular background program processing daemon. vm # Starting pollinate.service - Polli…e pseudo random number generator... vm # Starting systemd-user-sessions.service - Permit User Sessions... vm # [ OK ] Finished systemd-user-sessions.service - Permit User Sessions. vm # Starting plymouth-quit-wait.servic…d until boot process finishes up... vm # Starting plymouth-quit.service - Terminate Plymouth Boot Screen... vm # [ OK ] Finished plymouth-quit-wait.servic…old until boot process finishes up. vm # Starting setvtrgb.service - Set console scheme... vm # [ OK ] Finished plymouth-quit.service - Terminate Plymouth Boot Screen. vm # [ OK ] Finished setvtrgb.service - Set console scheme. vm # [ OK ] Created slice system-getty.slice - Slice /system/getty. vm # [ OK ] Started getty@tty1.service - Getty on tty1. vm # [ OK ] Reached target getty.target - Login Prompts. vm # [ OK ] Finished pollinate.service - Polli…the pseudo random number generator. vm # [ OK ] Finished apport.service - automatic crash report generation. vm # [ OK ] Finished resizeguest.service. vm # [ OK ] Reached target multi-user.target - Multi-User System. vm # [ OK ] Reached target graphical.target - Graphical Interface. vm # Starting systemd-update-utmp-runle…- Record Runlevel Change in UTMP... vm # [ OK ] Finished systemd-update-utmp-runle…e - Record Runlevel Change in UTMP. vm: (finished: waiting for unit multi-user.target, in 28.44 seconds) vm: must succeed: systemctl unmask ssh.service || true vm # Removed "/etc/systemd/system/ssh.service". vm: (finished: must succeed: systemctl unmask ssh.service || true, in 0.26 seconds) vm: must succeed: systemctl unmask ssh.socket || true vm # Removed "/etc/systemd/system/ssh.socket". vm: (finished: must succeed: systemctl unmask ssh.socket || true, in 0.24 seconds) vm: must succeed: ssh-keygen -A vm: (finished: must succeed: ssh-keygen -A, in 0.34 seconds) vm: must succeed: mkdir -p /root/.ssh vm: (finished: must succeed: mkdir -p /root/.ssh, in 0.01 seconds) vm: must succeed: echo 'ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIMziQ+DhXsMxhx64DxUhR0G/DfSAz2pqAREDy/VUYEEF' > /root/.ssh/authorized_keys vm: (finished: must succeed: echo 'ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIMziQ+DhXsMxhx64DxUhR0G/DfSAz2pqAREDy/VUYEEF' > /root/.ssh/authorized_keys, in 0.01 seconds) vm: must succeed: chmod 644 /root/.ssh/authorized_keys vm: (finished: must succeed: chmod 644 /root/.ssh/authorized_keys, in 0.01 seconds) vm: must succeed: sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/' /etc/ssh/sshd_config vm: (finished: must succeed: sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/' /etc/ssh/sshd_config, in 0.01 seconds) vm: must succeed: systemctl start ssh vm: (finished: must succeed: systemctl start ssh, in 0.10 seconds) + shift + [[ 1 -gt 0 ]] + case "$1" in + [[ -z '' ]] + sshConnection=root@localhost + shift + [[ 0 -gt 0 ]] + [[ '' != '' ]] + diskoMode=disko + diskoAttr=diskoScript + [[ y == n ]] + [[ y == y ]] + nixOptions+=("-L") + [[ y == y ]] + nixCopyOptions+=("--substitute-on-destination") + [[ n == n ]] + [[ -z root@localhost ]] + [[ auto == local ]] + [[ -n '' ]] + [[ n == y ]] + [[ auto == auto ]] + checkBuildLocally + local system extraPlatforms machineSystem ++ nix --extra-experimental-features 'nix-command flakes' config show system warning: you don't have Internet access; disabling some network-dependent features + system=x86_64-linux ++ nix --extra-experimental-features 'nix-command flakes' config show extra-platforms warning: you don't have Internet access; disabling some network-dependent features + extraPlatforms='i686-linux x86_64-v1-linux x86_64-v2-linux x86_64-v3-linux x86_64-v4-linux' + [[ 0 -gt 0 ]] + [[ -n /nix/store/p8pvnnwdxb2cbay372hfma22vrf0yzl4-nixos-system-nixos-anywhere-26.11pre-git ]] ++ cat /nix/store/p8pvnnwdxb2cbay372hfma22vrf0yzl4-nixos-system-nixos-anywhere-26.11pre-git/system + machineSystem=x86_64-linux + [[ x86_64-linux == x86_64\-linux ]] + buildOn=local + return + [[ -n '' ]] + [[ -n /nix/store/gz354vln7rdlpc28i8cx1wbfp6fcb3ms-disko/bin/disko ]] + [[ -n /nix/store/p8pvnnwdxb2cbay372hfma22vrf0yzl4-nixos-system-nixos-anywhere-26.11pre-git ]] + [[ ! -e /nix/store/gz354vln7rdlpc28i8cx1wbfp6fcb3ms-disko/bin/disko ]] + [[ ! -e /nix/store/p8pvnnwdxb2cbay372hfma22vrf0yzl4-nixos-system-nixos-anywhere-26.11pre-git ]] + [[ -n '' ]] ++ ssh -o IdentitiesOnly=yes -i /build/tmp.IpJNTbVyMi/nixos-anywhere -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 2222 -G root@localhost Warning: Identity file /build/tmp.IpJNTbVyMi/nixos-anywhere not accessible: No such file or directory. + sshSettings=$'host localhost\nuser root\nhostname localhost\nport 2222\naddressfamily any\nbatchmode no\ncanonicalizefallbacklocal yes\ncanonicalizehostname false\ncheckhostip no\ncompression no\ncontrolmaster false\nenablesshkeysign no\nclearallforwardings no\nexitonforwardfailure no\nfingerprinthash SHA256\nforwardx11 no\nforwardx11trusted no\ngatewayports no\nhashknownhosts no\nhostbasedauthentication no\nidentitiesonly yes\nkbdinteractiveauthentication yes\nnohostauthenticationforlocalhost no\npasswordauthentication yes\npermitlocalcommand no\nproxyusefdpass no\npubkeyauthentication true\nrequesttty auto\nsessiontype default\nstdinnull no\nforkafterauthentication no\nstreamlocalbindunlink no\nstricthostkeychecking false\ntcpkeepalive yes\ntunnel false\nverifyhostkeydns false\nvisualhostkey no\nupdatehostkeys false\nenableescapecommandline no\nwarnweakcrypto yes\ncanonicalizemaxdots 1\nconnectionattempts 1\nforwardx11timeout 1200\nnumberofpasswordprompts 3\nserveralivecountmax 3\nserveraliveinterval 0\nrequiredrsasize 1024\nobscurekeystroketiming yes\nciphers chacha20-poly1305@openssh.com,aes128-gcm@openssh.com,aes256-gcm@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr\nhostkeyalgorithms ssh-ed25519-cert-v01@openssh.com,ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,sk-ssh-ed25519-cert-v01@openssh.com,sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,webauthn-sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,sk-ssh-ed25519@openssh.com,sk-ecdsa-sha2-nistp256@openssh.com,webauthn-sk-ecdsa-sha2-nistp256@openssh.com,rsa-sha2-512,rsa-sha2-256\nhostbasedacceptedalgorithms ssh-ed25519-cert-v01@openssh.com,ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,sk-ssh-ed25519-cert-v01@openssh.com,sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,webauthn-sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,sk-ssh-ed25519@openssh.com,sk-ecdsa-sha2-nistp256@openssh.com,webauthn-sk-ecdsa-sha2-nistp256@openssh.com,rsa-sha2-512,rsa-sha2-256\nkexalgorithms mlkem768x25519-sha256,sntrup761x25519-sha512,sntrup761x25519-sha512@openssh.com,curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256\ncasignaturealgorithms ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,sk-ssh-ed25519@openssh.com,sk-ecdsa-sha2-nistp256@openssh.com,webauthn-sk-ecdsa-sha2-nistp256@openssh.com,rsa-sha2-512,rsa-sha2-256\nloglevel INFO\nmacs umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1\nsecuritykeyprovider internal\npubkeyacceptedalgorithms ssh-ed25519-cert-v01@openssh.com,ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,sk-ssh-ed25519-cert-v01@openssh.com,sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,webauthn-sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,sk-ssh-ed25519@openssh.com,sk-ecdsa-sha2-nistp256@openssh.com,webauthn-sk-ecdsa-sha2-nistp256@openssh.com,rsa-sha2-512,rsa-sha2-256\nxauthlocation /usr/X11R6/bin/xauth\nidentityfile ~/.ssh/id_rsa\nidentityfile ~/.ssh/id_ecdsa\nidentityfile ~/.ssh/id_ecdsa_sk\nidentityfile ~/.ssh/id_ed25519\nidentityfile ~/.ssh/id_ed25519_sk\ncanonicaldomains none\nglobalknownhostsfile /etc/ssh/ssh_known_hosts /etc/ssh/ssh_known_hosts2\nuserknownhostsfile /dev/null\nrevokedhostkeys none\nlogverbose none\nchanneltimeout none\npermitremoteopen any\naddkeystoagent false\nforwardagent no\nconnecttimeout none\ntunneldevice any:any\ncanonicalizePermittedcnames none\ncontrolpersist no\nescapechar ~\nipqos ef cs0\nrekeylimit 0 0\nstreamlocalbindmask 0177\nsyslogfacility USER' ++ echo $'host localhost\nuser root\nhostname localhost\nport 2222\naddressfamily any\nbatchmode no\ncanonicalizefallbacklocal yes\ncanonicalizehostname false\ncheckhostip no\ncompression no\ncontrolmaster false\nenablesshkeysign no\nclearallforwardings no\nexitonforwardfailure no\nfingerprinthash SHA256\nforwardx11 no\nforwardx11trusted no\ngatewayports no\nhashknownhosts no\nhostbasedauthentication no\nidentitiesonly yes\nkbdinteractiveauthentication yes\nnohostauthenticationforlocalhost no\npasswordauthentication yes\npermitlocalcommand no\nproxyusefdpass no\npubkeyauthentication true\nrequesttty auto\nsessiontype default\nstdinnull no\nforkafterauthentication no\nstreamlocalbindunlink no\nstricthostkeychecking false\ntcpkeepalive yes\ntunnel false\nverifyhostkeydns false\nvisualhostkey no\nupdatehostkeys false\nenableescapecommandline no\nwarnweakcrypto yes\ncanonicalizemaxdots 1\nconnectionattempts 1\nforwardx11timeout 1200\nnumberofpasswordprompts 3\nserveralivecountmax 3\nserveraliveinterval 0\nrequiredrsasize 1024\nobscurekeystroketiming yes\nciphers chacha20-poly1305@openssh.com,aes128-gcm@openssh.com,aes256-gcm@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr\nhostkeyalgorithms ssh-ed25519-cert-v01@openssh.com,ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,sk-ssh-ed25519-cert-v01@openssh.com,sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,webauthn-sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,sk-ssh-ed25519@openssh.com,sk-ecdsa-sha2-nistp256@openssh.com,webauthn-sk-ecdsa-sha2-nistp256@openssh.com,rsa-sha2-512,rsa-sha2-256\nhostbasedacceptedalgorithms ssh-ed25519-cert-v01@openssh.com,ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,sk-ssh-ed25519-cert-v01@openssh.com,sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,webauthn-sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,sk-ssh-ed25519@openssh.com,sk-ecdsa-sha2-nistp256@openssh.com,webauthn-sk-ecdsa-sha2-nistp256@openssh.com,rsa-sha2-512,rsa-sha2-256\nkexalgorithms mlkem768x25519-sha256,sntrup761x25519-sha512,sntrup761x25519-sha512@openssh.com,curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256\ncasignaturealgorithms ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,sk-ssh-ed25519@openssh.com,sk-ecdsa-sha2-nistp256@openssh.com,webauthn-sk-ecdsa-sha2-nistp256@openssh.com,rsa-sha2-512,rsa-sha2-256\nloglevel INFO\nmacs umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1\nsecuritykeyprovider internal\npubkeyacceptedalgorithms ssh-ed25519-cert-v01@openssh.com,ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,sk-ssh-ed25519-cert-v01@openssh.com,sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,webauthn-sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,sk-ssh-ed25519@openssh.com,sk-ecdsa-sha2-nistp256@openssh.com,webauthn-sk-ecdsa-sha2-nistp256@openssh.com,rsa-sha2-512,rsa-sha2-256\nxauthlocation /usr/X11R6/bin/xauth\nidentityfile ~/.ssh/id_rsa\nidentityfile ~/.ssh/id_ecdsa\nidentityfile ~/.ssh/id_ecdsa_sk\nidentityfile ~/.ssh/id_ed25519\nidentityfile ~/.ssh/id_ed25519_sk\ncanonicaldomains none\nglobalknownhostsfile /etc/ssh/ssh_known_hosts /etc/ssh/ssh_known_hosts2\nuserknownhostsfile /dev/null\nrevokedhostkeys none\nlogverbose none\nchanneltimeout none\npermitremoteopen any\naddkeystoagent false\nforwardagent no\nconnecttimeout none\ntunneldevice any:any\ncanonicalizePermittedcnames none\ncontrolpersist no\nescapechar ~\nipqos ef cs0\nrekeylimit 0 0\nstreamlocalbindmask 0177\nsyslogfacility USER' ++ awk '/^user / { print $2 }' + sshUser=root + sshHost=localhost + [[ 1 != 1 ]] + uploadSshKey + local sshCopyHome=/homeless-shelter + mkdir -p /homeless-shelter/.ssh/ + [[ -n /build/tmp7hee5e45_ssh_key ]] + cp /build/tmp7hee5e45_ssh_key /build/tmp.IpJNTbVyMi/nixos-anywhere + ssh-keygen -y -f /build/tmp.IpJNTbVyMi/nixos-anywhere + step Uploading install SSH keys + echo '### Uploading install SSH keys ###' ### Uploading install SSH keys ### + [[ n == y ]] + HOME=/homeless-shelter + ssh-copy-id -o IdentitiesOnly=no -o ConnectTimeout=10 -o IdentitiesOnly=yes -i /build/tmp.IpJNTbVyMi/nixos-anywhere -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 2222 root@localhost /nix/store/ww2wf5b928m0b53dp2bdifpgqqyfshvb-openssh-10.3p1/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/build/tmp.IpJNTbVyMi/nixos-anywhere.pub" /nix/store/ww2wf5b928m0b53dp2bdifpgqqyfshvb-openssh-10.3p1/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed /nix/store/ww2wf5b928m0b53dp2bdifpgqqyfshvb-openssh-10.3p1/bin/ssh-copy-id: WARNING: All keys were skipped because they already exist on the remote system. (if you think this is a mistake, you may want to use -f option) + importFacts + step Gathering machine facts + echo '### Gathering machine facts ###' ### Gathering machine facts ### + local facts filteredFacts ++ runSsh -o ConnectTimeout=10 enableDebug=-x sh -- ++ set +x + test -f /etc/os-release + grep -Eq ID(_LIKE)?="?nixos"? /etc/os-release + echo n + isNixos=n + uname + uname -m + [ n = y ] + echo n + has systemd-detect-virt + command -v systemd-detect-virt + echo y + [ y = y ] + systemd-detect-virt --container + id -u + [ 0 -eq 0 ] + echo y + has ip + command -v ip + echo y + [ y = n ] + ip r g 1 + echo n + has tar + command -v tar + echo y + has cpio + command -v cpio + echo y + has sudo + command -v sudo + echo y + has doas + command -v doas + echo n + has wget + command -v wget + echo y + has curl + command -v curl + echo y + has setsid + command -v setsid + echo y + [ y = y ] + setsid --wait true + echo y + command -v nixos-facter + echo n + cat + facts=$'\E[1;34mSSH COMMAND:\E[0m ssh -T -o IdentitiesOnly=yes -i /build/tmp.IpJNTbVyMi/nixos-anywhere -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 2222 root@localhost -o ConnectTimeout=10 enableDebug=-x sh --\n\nisOs=Linux\nisArch=x86_64\nisNixos=n\nisInstaller=n\nisContainer=none\nisRoot=y\nhasIpv6Only=n\nhasTar=y\nhasCpio=y\nhasSudo=y\nhasDoas=n\nhasWget=y\nhasCurl=y\nhasSetsid=y\nhasNixOSFacter=n' ++ echo $'\E[1;34mSSH COMMAND:\E[0m ssh -T -o IdentitiesOnly=yes -i /build/tmp.IpJNTbVyMi/nixos-anywhere -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 2222 root@localhost -o ConnectTimeout=10 enableDebug=-x sh --\n\nisOs=Linux\nisArch=x86_64\nisNixos=n\nisInstaller=n\nisContainer=none\nisRoot=y\nhasIpv6Only=n\nhasTar=y\nhasCpio=y\nhasSudo=y\nhasDoas=n\nhasWget=y\nhasCurl=y\nhasSetsid=y\nhasNixOSFacter=n' ++ grep -E '^(has|is|remote)[A-Za-z0-9_]+=\S+' + filteredFacts=$'isOs=Linux\nisArch=x86_64\nisNixos=n\nisInstaller=n\nisContainer=none\nisRoot=y\nhasIpv6Only=n\nhasTar=y\nhasCpio=y\nhasSudo=y\nhasDoas=n\nhasWget=y\nhasCurl=y\nhasSetsid=y\nhasNixOSFacter=n' + [[ -z isOs=Linux isArch=x86_64 isNixos=n isInstaller=n isContainer=none isRoot=y hasIpv6Only=n hasTar=y hasCpio=y hasSudo=y hasDoas=n hasWget=y hasCurl=y hasSetsid=y hasNixOSFacter=n ]] + set +x + [[ y == y ]] + maybeSudo= + [[ y == n ]] + [[ y == n ]] + [[ y == n ]] + [[ Linux != Linux ]] + [[ 1 == 1 ]] + runKexec + [[ n == y ]] + [[ none != none ]] + [[ /nix/store/lhjvzqwgs776181i8656vd59l6nwkdbx-kexec-tarball/nixos-kexec-installer-noninteractive-x86_64-linux.tar.gz == '' ]] + step Switching system into kexec + echo '### Switching system into kexec ###' ### Switching system into kexec ### + [[ n == y ]] + local remoteCommandTemplate ++ printf %q '' + remoteCommandTemplate=$'\n# Run kexec commands with sudo if needed\n{\n set -eu -x\n cd "$HOME/kexec"\n echo Downloading kexec tarball, this may take a moment...\n # Execute tar command\n %TAR_COMMAND%\n TMPDIR="$HOME/kexec" setsid --wait "$HOME/kexec/kexec/run" --kexec-extra-flags \'\'\n} 2>&1 | tee "$HOME/kexec/nixos-anywhere.log" || true\n\n# The script will likely disconnect us, so we consider it successful if we see the kexec message\nif ! grep -q \'machine will boot into nixos\' "$HOME/kexec/nixos-anywhere.log"; then\n echo \'Kexec may have failed - check output above\'\n exit 1\nfi\n' + localUploadCommand=() + local localUploadCommand + remoteUploadCommand=() + local remoteUploadCommand + tarDecomp= + [[ /nix/store/lhjvzqwgs776181i8656vd59l6nwkdbx-kexec-tarball/nixos-kexec-installer-noninteractive-x86_64-linux.tar.gz =~ \.tar\.gz$ ]] + tarDecomp=--gzip + [[ -f /nix/store/lhjvzqwgs776181i8656vd59l6nwkdbx-kexec-tarball/nixos-kexec-installer-noninteractive-x86_64-linux.tar.gz ]] + localUploadCommand=(cat "$kexecUrl") + local tarCommand + [[ 2 -eq 0 ]] + tarCommand='cat "$HOME/kexec/kexec-tarball.tar.gz" | tar -xv --gzip' + local remoteCommands + remoteCommands=$'\n# Run kexec commands with sudo if needed\n{\n set -eu -x\n cd "$HOME/kexec"\n echo Downloading kexec tarball, this may take a moment...\n # Execute tar command\n cat "$HOME/kexec/kexec-tarball.tar.gz" | tar -xv --gzip\n TMPDIR="$HOME/kexec" setsid --wait "$HOME/kexec/kexec/run" --kexec-extra-flags \'\'\n} 2>&1 | tee "$HOME/kexec/nixos-anywhere.log" || true\n\n# The script will likely disconnect us, so we consider it successful if we see the kexec message\nif ! grep -q \'machine will boot into nixos\' "$HOME/kexec/nixos-anywhere.log"; then\n echo \'Kexec may have failed - check output above\'\n exit 1\nfi\n' + runSsh 'mkdir -p "$HOME/kexec" && cat > "$HOME/kexec/nixos-anywhere-kexec.sh"' + set +x SSH COMMAND: ssh -T -o IdentitiesOnly=yes -i /build/tmp.IpJNTbVyMi/nixos-anywhere -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 2222 root@localhost mkdir -p "$HOME/kexec" && cat > "$HOME/kexec/nixos-anywhere-kexec.sh" + [[ 2 -gt 0 ]] + cat /nix/store/lhjvzqwgs776181i8656vd59l6nwkdbx-kexec-tarball/nixos-kexec-installer-noninteractive-x86_64-linux.tar.gz + runSsh 'cat > "$HOME/kexec/kexec-tarball.tar.gz"' + set +x SSH COMMAND: ssh -T -o IdentitiesOnly=yes -i /build/tmp.IpJNTbVyMi/nixos-anywhere -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 2222 root@localhost cat > "$HOME/kexec/kexec-tarball.tar.gz" + runSsh 'bash "$HOME/kexec/nixos-anywhere-kexec.sh"' + set +x SSH COMMAND: ssh -T -o IdentitiesOnly=yes -i /build/tmp.IpJNTbVyMi/nixos-anywhere -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 2222 root@localhost bash "$HOME/kexec/nixos-anywhere-kexec.sh" + cd /root/kexec + echo Downloading kexec tarball, this may take a moment... Downloading kexec tarball, this may take a moment... + cat /root/kexec/kexec-tarball.tar.gz + tar -xv --gzip kexec/ kexec/bzImage kexec/run kexec/kexec kexec/ip kexec/initrd + TMPDIR=/root/kexec + setsid --wait /root/kexec/kexec/run --kexec-extra-flags '' + kexec_extra_flags= + [ 2 -gt 0 ] + kexec_extra_flags= + shift + shift + [ 0 -gt 0 ] + init=/nix/store/sdh1qbz22s15haxql6p46ml8bsnklw64-nixos-system-nixos-installer-kexec-26.11pre-git/init + kernelParams=nouveau.modeset=0 console=tty0 console=ttyS0,115200 zswap.enabled=1 zswap.max_pool_percent=50 zswap.compressor=zstd zswap.zpool=zsmalloc root=fstab loglevel=4 lsm=landlock,yama,bpf + readlink -f /root/kexec/kexec/run + dirname /root/kexec/kexec/run + SCRIPT_DIR=/root/kexec/kexec + TMPDIR=/root/kexec/kexec mktemp -d + INITRD_TMP=/root/kexec/kexec/tmp.yGHzwhV3bt + cd /root/kexec/kexec/tmp.yGHzwhV3bt + trap cleanup EXIT + mkdir -p ssh + extractPubKeys /root + home=/root + key=/root/.ssh/authorized_keys + test -e /root/.ssh/authorized_keys + grep -o \(\(ssh\|ecdsa\|sk\)-[^ ]* .*\) /root/.ssh/authorized_keys + key=/root/.ssh/authorized_keys2 + test -e /root/.ssh/authorized_keys2 + test -n + test -n + test -e /etc/ssh/authorized_keys.d/root + test -n + test -e /etc/ssh/ssh_host_ecdsa_key + cp -a /etc/ssh/ssh_host_ecdsa_key ssh + test -e /etc/ssh/ssh_host_ecdsa_key.pub + cp -a /etc/ssh/ssh_host_ecdsa_key.pub ssh + test -e /etc/ssh/ssh_host_ed25519_key + cp -a /etc/ssh/ssh_host_ed25519_key ssh + test -e /etc/ssh/ssh_host_ed25519_key.pub + cp -a /etc/ssh/ssh_host_ed25519_key.pub ssh + test -e /etc/ssh/ssh_host_rsa_key + cp -a /etc/ssh/ssh_host_rsa_key ssh + test -e /etc/ssh/ssh_host_rsa_key.pub + cp -a /etc/ssh/ssh_host_rsa_key.pub ssh + /root/kexec/kexec/ip --json addr + /root/kexec/kexec/ip -4 --json route + /root/kexec/kexec/ip -6 --json route + [ -f /etc/machine-id ] + cp /etc/machine-id machine-id + find . + cpio -o -H newc + gzip -9 17 blocks + kexecSyscallFlags= + sort -c -V + uname -r + printf %s\n 6.1 6.8.0-117-generic + kexecSyscallFlags=--kexec-syscall-auto + sh -c '/root/kexec/kexec/kexec' --load '/root/kexec/kexec/bzImage' --kexec-syscall-auto --initrd='/root/kexec/kexec/initrd' --no-checks --command-line 'init=/nix/store/sdh1qbz22s15haxql6p46ml8bsnklw64-nixos-system-nixos-installer-kexec-26.11pre-git/init nouveau.modeset=0 console=tty0 console=ttyS0,115200 zswap.enabled=1 zswap.max_pool_percent=50 zswap.compressor=zstd zswap.zpool=zsmalloc root=fstab loglevel=4 lsm=landlock,yama,bpf' + echo machine will boot into nixos in 6s... machine will boot into nixos in 6s... + test -e /dev/kmsg + exec + local i + for i in "${!sshArgs[@]}" + [[ -o == \-p ]] + for i in "${!sshArgs[@]}" + [[ IdentitiesOnly=yes == \-p ]] + for i in "${!sshArgs[@]}" + [[ -i == \-p ]] + for i in "${!sshArgs[@]}" + [[ /build/tmp.IpJNTbVyMi/nixos-anywhere == \-p ]] + for i in "${!sshArgs[@]}" + [[ -o == \-p ]] + for i in "${!sshArgs[@]}" + [[ UserKnownHostsFile=/dev/null == \-p ]] + for i in "${!sshArgs[@]}" + [[ -o == \-p ]] + for i in "${!sshArgs[@]}" + [[ StrictHostKeyChecking=no == \-p ]] + for i in "${!sshArgs[@]}" + [[ -p == \-p ]] + sshArgs[i + 1]=2222 + break + runSshTimeout -- exit 0 + timeout 10 ssh -o IdentitiesOnly=yes -i /build/tmp.IpJNTbVyMi/nixos-anywhere -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 2222 root@localhost -- exit 0 + sleep 1 + runSshTimeout -- exit 0 + timeout 10 ssh -o IdentitiesOnly=yes -i /build/tmp.IpJNTbVyMi/nixos-anywhere -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 2222 root@localhost -- exit 0 + sleep 1 + runSshTimeout -- exit 0 + timeout 10 ssh -o IdentitiesOnly=yes -i /build/tmp.IpJNTbVyMi/nixos-anywhere -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 2222 root@localhost -- exit 0 + sleep 1 + runSshTimeout -- exit 0 + timeout 10 ssh -o IdentitiesOnly=yes -i /build/tmp.IpJNTbVyMi/nixos-anywhere -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 2222 root@localhost -- exit 0 + sleep 1 + runSshTimeout -- exit 0 + timeout 10 ssh -o IdentitiesOnly=yes -i /build/tmp.IpJNTbVyMi/nixos-anywhere -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 2222 root@localhost -- exit 0 + sleep 1 + runSshTimeout -- exit 0 + timeout 10 ssh -o IdentitiesOnly=yes -i /build/tmp.IpJNTbVyMi/nixos-anywhere -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 2222 root@localhost -- exit 0 vm # +q6E616D65Booting initrd of NixOS 26.11 (Zokor) (Initrd). vm # [ OK ] Created slice Slice /system/modprobe. vm # [ OK ] Started Dispatch Password Requests to Console Directory Watch. vm # [ OK ] Reached target Initrd Root Device. vm # [ OK ] Reached target Path Units. vm # [ OK ] Reached target Slice Units. vm # [ OK ] Reached target Swaps. vm # [ OK ] Reached target Timer Units. vm # [ OK ] Listening on D-Bus System Message Bus Socket. vm # [ OK ] Listening on Journal Socket (/dev/log). vm # [ OK ] Listening on Journal Sockets. vm # [ OK ] Listening on udev Control Socket. vm # [ OK ] Listening on udev Kernel Socket. vm # [ OK ] Reached target Socket Units. vm # Starting Create List of Static Device Nodes... vm # Starting Load Kernel Module configfs... vm # Starting Journal Service... vm # Starting Load Kernel Modules... vm # Starting Coldplug All udev Devices... vm # [ OK ] Finished Load Kernel Module configfs. vm # [ OK ] Finished Create List of Static Device Nodes. vm # Starting Create Static Device Nodes in /dev gracefully... vm # [ OK ] Finished Create Static Device Nodes in /dev gracefully. vm # Starting Create Static Device Nodes in /dev... vm # [ OK ] Finished Load Kernel Modules. vm # Starting Apply Kernel Variables... vm # [ OK ] Finished Create Static Device Nodes in /dev. vm # [ OK ] Reached target Preparation for Local File Systems. vm # [ OK ] Reached target Local File Systems. vm # Starting Rule-based Manager for Device Events and Files... vm # [ OK ] Started Journal Service. vm # [ OK ] Finished Apply Kernel Variables. vm # Starting Create System Files and Directories... vm # [ OK ] Finished Create System Files and Directories. vm # [ OK ] Started Rule-based Manager for Device Events and Files. vm # [ OK ] Finished Coldplug All udev Devices. vm # [ OK ] Reached target System Initialization. vm # [ OK ] Reached target Basic System. vm # Starting Virtual Console Setup... vm # [ OK ] Finished Virtual Console Setup. vm # Mounting /sysroot... vm # [ OK ] Mounted /sysroot. vm # [ OK ] Reached target Initrd Root File System. vm # Starting Mountpoints Configured in the Real Root... vm # Starting restore-state-from-initrd.service... vm # [ OK ] Finished restore-state-from-initrd.service. vm # Starting restore-state-from-initrd.service... vm # [ OK ] Finished Mountpoints Configured in the Real Root. vm # [ OK ] Finished restore-state-from-initrd.service. vm # Mounting /sysroot/nix/.ro-store... vm # Mounting /sysroot/nix/.rw-store... vm # Mounting /sysroot/run... vm # [ OK ] Mounted /sysroot/nix/.rw-store. vm # [ OK ] Mounted /sysroot/nix/.ro-store. vm # [ OK ] Mounted /sysroot/run. vm # Starting rw-sysroot-nix-store.service... vm # [ OK ] Finished rw-sysroot-nix-store.service. vm # Mounting /sysroot/nix/store... vm # [ OK ] Mounted /sysroot/nix/store. vm # Starting Find the path to the etc metadata image and based dir... vm # Starting Find NixOS closure... vm # [ OK ] Finished Find the path to the etc metadata image and based dir. vm # Mounting /run/nixos-etc-metadata... vm # [ OK ] Finished Find NixOS closure. vm # [ OK ] Mounted /run/nixos-etc-metadata. vm # Starting rw-etc.service... vm # [ OK ] Finished rw-etc.service. vm # Mounting /sysroot/etc... vm # [ OK ] Mounted /sysroot/etc. vm # [ OK ] Reached target Initrd File Systems. vm # Starting Create Volatile Files and Directories in the Real Root... vm # [ OK ] Finished Create Volatile Files and Directories in the Real Root. vm # [ OK ] Reached target Initrd Default Target. vm # Starting Cleaning Up and Shutting Down Daemons... vm # [ OK ] Stopped target Initrd Default Target. vm # [ OK ] Stopped target Basic System. vm # [ OK ] Stopped target Initrd Root Device. vm # [ OK ] Stopped target Path Units. vm # [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. vm # [ OK ] Stopped target Slice Units. vm # [ OK ] Stopped target Socket Units. vm # [ OK ] Stopped target System Initialization. vm # [ OK ] Stopped target Swaps. vm # [ OK ] Stopped target Timer Units. vm # [ OK ] Closed D-Bus System Message Bus Socket. vm # [ OK ] Stopped Find NixOS closure. vm # Starting restore-state-from-initrd.service... vm # Starting rw-sysroot-nix-store.service... vm # [ OK ] Stopped Apply Kernel Variables. vm # [ OK ] Stopped Load Kernel Modules. vm # [ OK ] Stopped Create Volatile Files and Directories in the Real Root. vm # [ OK ] Stopped Create System Files and Directories. vm # [ OK ] Stopped target Local File Systems. vm # [ OK ] Stopped target Preparation for Local File Systems. vm # [ OK ] Stopped Coldplug All udev Devices. vm # Stopping Rule-based Manager for Device Events and Files... vm # [ OK ] Stopped Virtual Console Setup. vm # [ OK ] Finished rw-sysroot-nix-store.service. vm # [ OK ] Finished Cleaning Up and Shutting Down Daemons. vm # [ OK ] Stopped Rule-based Manager for Device Events and Files. vm # [ OK ] Finished restore-state-from-initrd.service. vm # [ OK ] Closed udev Control Socket. vm # Starting Cleanup udev Database... vm # Starting rw-etc.service... vm # [ OK ] Stopped Create Static Device Nodes in /dev. vm # [ OK ] Stopped Create Static Device Nodes in /dev gracefully. vm # [ OK ] Stopped Create List of Static Device Nodes. vm # [ OK ] Finished Cleanup udev Database. vm # [ OK ] Finished rw-etc.service. vm # [ OK ] Reached target Switch Root. vm # Starting NixOS Activation... vm # [ OK ] Finished NixOS Activation. vm # Starting Switch Root... + sshConnection=root@localhost + runSsh -o ConnectTimeout=10 -- exit 0 + set +x SSH COMMAND: ssh -T -o IdentitiesOnly=yes -i /build/tmp.IpJNTbVyMi/nixos-anywhere -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 2222 root@localhost -o ConnectTimeout=10 -- exit 0 vm # +q6E616D65 vm # Welcome to NixOS 26.11 (Zokor)! vm # vm # [ SKIP ] Ordering cycle found, skipping Network Management Resolve Hook Socket vm # [ OK ] Stopped initrd-switch-root.service. vm # [ OK ] Created slice Slice /system/getty. vm # [ OK ] Created slice Slice /system/serial-getty. vm # [ OK ] Created slice User and Session Slice. vm # [ OK ] Started Dispatch Password Requests to Console Directory Watch. vm # [ OK ] Started Forward Password Requests to Wall Directory Watch. vm # Expecting device /dev/hvc0... vm # Expecting device /dev/ttyS0... vm # [ OK ] Reached target Local Encrypted Volumes. vm # [ OK ] Stopped target initrd-fs.target. vm # [ OK ] Stopped target initrd-root-fs.target. vm # [ OK ] Stopped target initrd-switch-root.target. vm # [ OK ] Reached target Virtual Machines and Containers. vm # [ OK ] Reached target Path Units. vm # [ OK ] Reached target Remote File Systems. vm # [ OK ] Reached target Slice Units. vm # [ OK ] Reached target Swaps. vm # [ OK ] Listening on Query the User Interactively for a Password. vm # [ OK ] Listening on Process Core Dump Socket. vm # [ OK ] Listening on Credential Encryption/Decryption. vm # [ OK ] Listening on Factory Reset Management. vm # [ OK ] Listening on Journal Audit Socket. vm # [ OK ] Listening on Console Output Muting Service Socket. vm # [ OK ] Listening on Network Management Metrics Varlink Socket. vm # [ OK ] Listening on Network Management Varlink Socket. vm # [ OK ] Listening on Network Management Netlink Socket. vm # [ OK ] Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm # [ OK ] Listening on Disk Repartitioning Service Socket. vm # [ OK ] Listening on Resolve Monitor Varlink Socket. vm # [ OK ] Listening on Resolve Service Varlink Socket. vm # [ OK ] Listening on udev Control Socket. vm # [ OK ] Listening on udev Varlink Socket. vm # Mounting Huge Pages File System... vm # Mounting POSIX Message Queue File System... vm # Mounting Kernel Debug File System... vm # Mounting Kernel Trace File System... vm # [ OK ] Stopped initrd-find-etc.service. vm # Starting Create List of Static Device Nodes... vm # Starting Load Kernel Module configfs... vm # Mounting FUSE Control File System... vm # Starting Journal Service... vm # Starting Load Kernel Modules... vm # Starting Remount Root and Kernel File Systems... vm # Starting Coldplug All udev Devices... vm # [ OK ] Mounted Huge Pages File System. vm # [ OK ] Mounted POSIX Message Queue File System. vm # [ OK ] Mounted Kernel Debug File System. vm # [ OK ] Mounted Kernel Trace File System. vm # [ OK ] Finished Create List of Static Device Nodes. vm # [ OK ] Finished Load Kernel Module configfs. vm # [ OK ] Mounted FUSE Control File System. vm # Mounting Kernel Configuration File System... vm # Starting Create Static Device Nodes in /dev gracefully... vm # [ OK ] Started Journal Service. vm # [ OK ] Mounted Kernel Configuration File System. vm # [ OK ] Finished Remount Root and Kernel File Systems. vm # [ OK ] Listening on Disk Image Download Service Socket. vm # Starting Flush Journal to Persistent Storage... vm # Starting Load/Save OS Random Seed... vm # [ OK ] Finished Load/Save OS Random Seed. vm # [ OK ] Finished Flush Journal to Persistent Storage. vm # [ OK ] Finished Coldplug All udev Devices. vm # [ OK ] Finished Create Static Device Nodes in /dev gracefully. vm # Starting Create System Users... vm # [ OK ] Finished Create System Users. vm # Starting Journal Log Access Socket... vm # Starting Userspace Out-Of-Memory (OOM) Killer... vm # Starting Network Time Synchronization... vm # Starting Create Static Device Nodes in /dev... vm # [ OK ] Listening on Journal Log Access Socket. vm # [ OK ] Finished Create Static Device Nodes in /dev. vm # [ OK ] Reached target Preparation for Local File Systems. vm # Starting Rule-based Manager for Device Events and Files... vm # [ OK ] Started Userspace Out-Of-Memory (OOM) Killer. vm # [ OK ] Started Network Time Synchronization. vm # [ OK ] Reached target System Time Set. vm # [ OK ] Started Rule-based Manager for Device Events and Files. vm # [ OK ] Finished Load Kernel Modules. vm # Starting Apply Kernel Variables... vm # [ OK ] Finished Apply Kernel Variables. vm # Starting Network Name Resolution... vm # Mounting /run/wrappers... vm # [ OK ] Mounted /run/wrappers. vm # [ OK ] Reached target Local File Systems. vm # [ OK ] Listening on Boot Loader Control Service Socket. vm # Starting Register Nix Store Paths... vm # Starting Create SUID/SGID Wrappers... vm # Starting Create System Files and Directories... vm # [ OK ] Started Network Name Resolution. vm # [ OK ] Finished Create System Files and Directories. vm # Starting Rebuild Journal Catalog... vm # Starting Record System Boot/Shutdown in UTMP... vm # [ OK ] Finished Record System Boot/Shutdown in UTMP. vm # [ OK ] Finished Rebuild Journal Catalog. vm # Starting Update is Completed... vm # [ OK ] Finished Update is Completed. vm # [ OK ] Finished Create SUID/SGID Wrappers. vm # Starting Virtual Console Setup... vm # [ OK ] Stopped Virtual Console Setup. vm # Starting Virtual Console Setup... vm # [ OK ] Stopped Virtual Console Setup. vm # Starting Virtual Console Setup... vm # [ OK ] Finished Virtual Console Setup. vm # [ OK ] Finished Register Nix Store Paths. vm # [ OK ] Reached target System Initialization. vm # [ OK ] Started Discard unused filesystem blocks once a week. vm # [ OK ] Started Daily Cleanup of Temporary Directories. vm # [ OK ] Reached target Timer Units. vm # [ OK ] Listening on D-Bus System Message Bus Socket. vm # [ OK ] Listening on Nix Daemon Socket. vm # [ OK ] Listening on OpenSSH Server Socket…temd-ssh-generator, AF_UNIX Local). vm # [ OK ] Listening on Hostname Service Socket. vm # [ OK ] Listening on Virtual Machine and C…tainer Registration Service Socket. vm # [ OK ] Reached target Socket Units. vm # [ OK ] Reached target Basic System. vm # Starting Import lastlog data into lastlog2 database... vm # Starting Name Service Cache Daemon (nsncd)... vm # Starting Post-Boot Actions... vm # [ OK ] Started Reset console on configuration changes. vm # Starting restore-network.service... vm # Starting D-Bus System Message Bus... vm # [ OK ] Finished Post-Boot Actions. vm # [ OK ] Started Name Service Cache Daemon (nsncd). vm # [ OK ] Reached target Host and Network Name Lookups. vm # [ OK ] Reached target User and Group Name Lookups. vm # Starting User Login Management... vm # [ OK ] Finished Import lastlog data into lastlog2 database. vm # [ OK ] Started User Login Management. vm # Starting linger-users.service... vm # [ OK ] Started D-Bus System Message Bus. vm # [ OK ] Finished linger-users.service. vm # [ OK ] Finished restore-network.service. vm # [ OK ] Reached target Preparation for Network. vm # Starting Network Management... vm # [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm # [ OK ] Started Network Management. vm # [ OK ] Reached target Network. vm # Starting SSH Daemon... vm # Starting Enable Persistent Storage in systemd-networkd... vm # Starting Permit User Sessions... vm # [ OK ] Finished Permit User Sessions. vm # [ OK ] Started Getty on tty1. vm # [ OK ] Started Serial Getty on hvc0. vm # [ OK ] Started Serial Getty on ttyS0. vm # [ OK ] Reached target Login Prompts. vm # [ OK ] Started SSH Daemon. vm # [ OK ] Finished Enable Persistent Storage in systemd-networkd. vm # [ OK ] Reached target Multi-User System. vm # +q6E616D65 vm # vm # <<< Welcome to NixOS kexec-26.11pre-git (x86_64) - ttyS0 >>> vm # The "nixos" and "root" accounts have empty passwords. vm # vm # To log in over ssh you must set a password for either "nixos" or "root" vm # with `passwd` (prefix with `sudo` for "root"), or add your public key to vm # /home/nixos/.ssh/authorized_keys or /root/.ssh/authorized_keys. vm # vm # To set up a wireless connection, run `nmtui`. vm # vm # vm # nixos-installer login: root (automatic login) vm # vm # + importFacts + step Gathering machine facts + echo '### Gathering machine facts ###' ### Gathering machine facts ### + local facts filteredFacts ++ runSsh -o ConnectTimeout=10 enableDebug=-x sh -- ++ set +x ++ test -f /etc/os-release ++ grep -Eq 'ID(_LIKE)?="?nixos"?' /etc/os-release ++ echo y + isNixos=y + cat ++ uname ++ uname -m ++ '[' y = y ']' ++ grep -Eq 'VARIANT_ID="?installer"?' /etc/os-release ++ echo y +++ has systemd-detect-virt +++ command -v systemd-detect-virt +++ echo y ++ '[' y = y ']' ++ systemd-detect-virt --container +++ id -u ++ '[' 0 -eq 0 ']' ++ echo y +++ has ip +++ command -v ip +++ echo y ++ '[' y = n ']' ++ ip r g 1 ++ echo n ++ has tar ++ command -v tar ++ echo y ++ has cpio ++ command -v cpio ++ echo y ++ has sudo ++ command -v sudo ++ echo n ++ has doas ++ command -v doas ++ echo n ++ has wget ++ command -v wget ++ echo n ++ has curl ++ command -v curl ++ echo y +++ has setsid +++ command -v setsid +++ echo y ++ '[' y = y ']' ++ setsid --wait true ++ echo y ++ command -v nixos-facter ++ echo y + facts=$'\E[1;34mSSH COMMAND:\E[0m ssh -T -o IdentitiesOnly=yes -i /build/tmp.IpJNTbVyMi/nixos-anywhere -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 2222 root@localhost -o ConnectTimeout=10 enableDebug=-x sh --\n\nisOs=Linux\nisArch=x86_64\nisNixos=y\nisInstaller=y\nisContainer=none\nisRoot=y\nhasIpv6Only=n\nhasTar=y\nhasCpio=y\nhasSudo=n\nhasDoas=n\nhasWget=n\nhasCurl=y\nhasSetsid=y\nhasNixOSFacter=y' ++ echo $'\E[1;34mSSH COMMAND:\E[0m ssh -T -o IdentitiesOnly=yes -i /build/tmp.IpJNTbVyMi/nixos-anywhere -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 2222 root@localhost -o ConnectTimeout=10 enableDebug=-x sh --\n\nisOs=Linux\nisArch=x86_64\nisNixos=y\nisInstaller=y\nisContainer=none\nisRoot=y\nhasIpv6Only=n\nhasTar=y\nhasCpio=y\nhasSudo=n\nhasDoas=n\nhasWget=n\nhasCurl=y\nhasSetsid=y\nhasNixOSFacter=y' ++ grep -E '^(has|is|remote)[A-Za-z0-9_]+=\S+' + filteredFacts=$'isOs=Linux\nisArch=x86_64\nisNixos=y\nisInstaller=y\nisContainer=none\nisRoot=y\nhasIpv6Only=n\nhasTar=y\nhasCpio=y\nhasSudo=n\nhasDoas=n\nhasWget=n\nhasCurl=y\nhasSetsid=y\nhasNixOSFacter=y' + [[ -z isOs=Linux isArch=x86_64 isNixos=y isInstaller=y isContainer=none isRoot=y hasIpv6Only=n hasTar=y hasCpio=y hasSudo=n hasDoas=n hasWget=n hasCurl=y hasSetsid=y hasNixOSFacter=y ]] + set +x + [[ y == y ]] + maybeSudo= + [[ y == n ]] + [[ none != none ]] + [[ local == auto ]] + [[ local != remote ]] + [[ -n '' ]] + [[ y == y ]] + [[ root != root ]] + [[ y == y ]] + [[ -n '' ]] + [[ 0 == 1 ]] + [[ 0 == 1 ]] + [[ 0 == 1 ]] + step 'Done!' + echo '### Done! ###' ### Done! ### + rm -rf /build/tmp.IpJNTbVyMi vm: forced crash vm: waiting for the VM to power off additionally exposed symbols: vm, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh vm # [root@nixos-installer:~]# vm: (finished: waiting for the VM to power off, in 0.05 seconds) (finished: run the VM test script, in 72.20 seconds) test script finished in 72.20s cleanup (finished: cleanup, in 0.00 seconds)